有机电致发光红色发光材料研究进展

本文总结了近年来有机金属配合物、分子内电荷转移化合物、稠环芳香类化合物以及齐聚物等几类有机电致发光红色发光材料的研究进展,详细介绍了它们在有机电致发光器件中的应用,并对有机电致发光红色发光材料未来的研究方向作了展望.     

Simply Structured Near-Infrared Emitters with a Multicyano Linear Acceptor for Solution-Processed Organic Light-Emitting Diodes

Near-infrared (NIR) organic light-emitting diodes (OLEDs) show great potential in a variety of applications including sensors, night vision, and information security. Despite the superiority of thermally activated delayed fluorescence (TADF) in 100 % exciton harvesting, the development of NIR TADF OLEDs is still a great challenge, especially in terms of solution-processing technology. In this work, a multicyano acceptor of 2-dicyanomethylene-3-cyano-4,5,5-trimethyl-2,5-dihydrofurance (TCF) with strong electron-withdrawing ability was employed to construct solution-processible NIR emitters, CzTCF and tBCzTCF, with the feature of donor–π–acceptor (D –π–A) structure. The significantly enhanced intermolecular charge transfer effects not only render the deep-red and NIR emissions of CzTCF and tBCzTCF films, respectively, but also lead to their typical TADF characteristics. Consequently, the nondoped solution-processed NIR OLED based on tBCzTCF was successfully demonstrated with the peak wavelength of 715 nm, which paves the way for developing NIR emitters without polycyclic aromatic cores and heavy-metal ions.     

Achieving Solution-Processed Non-Doped Single-Emitting-Layer White Organic Light-Emitting Diodes through Adjusting Pyrene-Based Polyaromatic Hydrocarbon

Single-emitting-layer white organic light-emitting diodes (SEL-WOLEDs) have developed rapidly in recent years due to the outstanding advantages of high efficiency, simple device structure, low cost, less phase separation, and stable emission color. Nevertheless, the relatively complicated host-dopant system is usually essential for most previous SEL-WOLEDs and the development of simple non-doped SEL-WOLEDs lags behind. Hence the straightforward synthesis of single-white-emitting molecules for non-doped SEL-WOLEDs still remains a great challengeable task. In this article, we designed and synthesized two new pyrene-based polyaromatic hydrocarbons (PAHs) and used them as emitting layer materials in the OLED devices. When the molecules change from the mono-fused one to bis-fused one, the emitting light changes from greenish to white color. Further study indicated that the bis-fused molecule PyD with more twisted and extended backbone packed in neat Cmca space group in single-crystal system compared with P2₁/n for PyS, which may be favorable to form excimers in the solid state and broaden the emission spectrum in the OLEDs. As a result, a solution-processed non-doped single-white-emitting-molecule SEL-WOLED with high performance (e. g., a high color rendering index of 66) is reported. The findings will be beneficial not only to further development of simple WOLEDs, but also to other related organic optoelectronic technology.     

交联型小分子空穴传输材料在溶液工艺制备有机发光二极管中的应用

相比蒸镀工艺,溶液工艺制备有机发光二极管（OLEDs）具有材料利用率高、设备要求简单、成本低、可制作大尺寸面板等优点,受到了广泛关注。小分子空穴传输材料是有机发光二极管重要组成部分,起到传输空穴和阻挡电子的作用,在其结构上添加苯乙烯基、氧杂环丁烷等可交联基团,形成适合溶液工艺制备的可交联小分子空穴传输材料,通过热或光的引发形成网络状结构聚合物,进而应用于多层器件结构中,解决层间混溶问题,从而改善器件的效率和稳定性。本文从溶液工艺对材料的要求出发,首先介绍了旋转涂布及喷墨打印工艺的制备方法,评价了不同操作因素对薄膜质量的影响,之后详细介绍各不同交联基团的空穴传输材料,总结并对比各交联基团的优劣,以及对器件性能的影响。最后,展望了可交联空穴传输材料和溶液制备工艺的发展趋势。     

Highly Efficient Solution-Processed Blue Phosphorescent Organic Light-Emitting Diodes Based on Co-Dopant and Co-Host System

The low-lying HOMO level of the blue emitter and the interfacial miscibility of organic materials result in inferior hole injection, and long exciton lifetime leads to triplet-triplet annihilation (TTA) and triplet-polaron annihilation (TPA), so the efficiencies of blue phosphorescent organic light-emitting diodes (PhOLEDs) are still unsatisfactory. Herein, we design co-host and co-dopant structures to improve the efficiency of blue PhOLEDs by means of solution processing. TcTa acts as hole transport ladder due to its high-lying HOMO level, and bipolar mCPPO1 helps to balance carriers’ distribution and weaken TPA. Besides the efficient FIr6, which acts as the dominant blue dopant, FCNIrPic was introduced as the second dopant, whose higher HOMO level accelerates hole injection and high triplet energy facilitates energy transfer. An interesting phenomenon caused by microcavity effect between anode and cathode was observed. With increasing thickness of ETL, peak position of electroluminescence (EL) spectrum red shifts gradually. Once the thickness of ETL exceeded 140 nm, emission peak blue-shifts went back to its original position. Finally, the maximum current efficiency (CE), power efficiency (PE), and external quantum efficiency (EQE) of blue phosphorescent organic light-emitting diode (PhOLED) went up to 20.47 cd/A, 11.96 lm/W, and 11.62%, respectively.     

Solution-Processed Yellow Organic Light-Emitting Diodes Based on Two New Ionic Ir (III) Complexes

Two new and efficient cationic yellow-emissive Ir (III) complexes (Ir1 and Ir2) are rationally designed by using 2-(4-chloro-3-(trifluoromethyl)phenyl)-4-methylquinoline as the main ligand, and, respectively, 4,4′-dimethyl-2,2′-bipyridyl and 4,4′-dimethoxy-2,2′-bipyridyl as the ancillary ligands. Both complexes show enhanced phosphorescence (546 nm with 572 nm as shoulder and high phosphorescent quantum efficiency in solution, which is in favor of efficient solution-processed phosphorescent organic light-emitting diodes. Compared with Ir2, the Ir1-based device displays excellent device performance, with maximum external quantum efficiency, current efficiency, and power efficiency of up to 7.92%, 26.32 cd/A and 15.31 lm/W, respectively, thus proving that the two new ionic Ir (III) complexes exhibit great potential for future solution-processed electroluminescence.     

白光有机电致发光器件进展

白光有机电致发光器件（WOLEDs）在显示和照明领域有着极大的应用前景,受到人们广泛的关注。本文从多个方面综述了WOLEDs近年来的研究进展,探讨了它的应用前景及需要解决的问题。     

含硼有机发光二极管材料与器件

硼元素因其独特的价层电子结构——价电子数少于价轨道数,而拥有一个空的p轨道,其三配位化合物既可以和邻近的π体系产生有效共轭,又可以容易地与路易斯碱发生络合,形成四配位化合物。将硼元素引入传统的光电功能分子当中,往往能给整个体系带来独特的光电性质,这已成为新型有机光电功能分子设计的重要思路。本文围绕硼元素的三配位化合物和四配位化合物,从分子设计理念、化合物光电性质、相关器件的结构与效率等方面对含硼有机光电功能分子及其器件的研究进展进行综述,并对其未来发展做出展望。     

Synthesis of Highly Monodisperse Cu2O Nanocrystals and Their Applications as Hole-Transporting Layers in Solution-Processed Light-Emitting Diodes

The synthesis of phase-pure, narrow-size-distributed and highly stable Cu₂O nanocrystals is reported, which can be processed as hole-transporting layers (HTLs) in solution-processed optoelectronic devices. The synthesis is based on a thermal decomposition process with a ligand protection strategy. The reactivity of precursor can be tuned by simply modulating the concentration of oleylamine in non-coordinated solvent, resulting in effectively controlling the size and size distribution of Cu₂O nanocrystals. Combined with ligand protection strategy of using lithium stearate and moderate reaction temperature of 170 °C, in situ aggregation of Cu₂O nanocrystals could be inhibited, exhibiting excellent stability in hexane for several months. The resulting phase-pure colloidal Cu₂O particles (after ozone-treatment) were applied as HTLs in polymer light-emitting diodes, the performance of which are comparable to that of the poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) based devices.     

有机电致发光空穴传输材料研究进展*

有机空穴传输材料的成膜性及其薄膜的热稳定性对于提高有机电致发光器件的效率和寿命具有重要的作用.本文按材料所含主体结构单元的不同,将有机空穴传输材料分为三类,从提高材料的成膜性及其热稳定性出发,详细介绍了近年来有机空穴传输材料的研究进展.     

Aromatic-Imide-Based Thermally Activated Delayed Fluorescence Materials for Highly Efficient Organic Light-Emitting Diodes

Aromatic-imide-based thermally activated delayed fluorescence (TADF) materials with a twisted donor–acceptor–donor skeleton were efficiently synthesized and exhibited excellent thermal stability and high photoluminescence quantum yields. The small ΔE_ST value (<0.1 eV) along with the clear temperature-dependent delayed component of their transient photoluminescence (PL) spectra demonstrated their excellent TADF properties. Moreover, the performance of organic light-emitting diodes in which TADF materials AI-Cz and AI-TBCz were used as dopants were outstanding, with external quantum efficiencies up to 23.2 and 21.1 %, respectively.     

Enhanced Operational Durability of Thermally Activated Delayed Fluorescence-Based Organic Light-Emitting Diodes with a Triazine Electron Transporter

In organic light-emitting diodes (OLEDs) based on materials that show thermally activated delayed fluorescence (TADF), the internal quantum efficiency of 100 % can be obtained without using phosphorescence-based organometallics that contain rare metals. Therefore, with TADF-based emitters, it is possible to fabricate high-performing OLEDs at a lower cost. However, compared with fluorescence- and phosphorescence-based OLEDs, an understanding of degradation mechanisms in TADF-based OLEDs is still insufficient for future commercialization. In particular, it is widely recognized that the development of electron transport materials is crucial for improving OLED characteristics, especially driving voltages and operational durability. In this study, it was demonstrated that the operational durability of TADF-based OLEDs was greatly improved by introducing a triazine-based material of 2,4,6-tris(1,1′-biphenyl-4-yl)-[1,3,5]triazine (pT2T) as a hole-blocking layer (HBL) compared with a conventional HBL material of 2,4,6-tris(biphenyl-3-yl)-[1,3,5]triazine (T2T). Several experiments were carried out to make the reasons of the improved durability clearer, and attributed the improved durability to the shift of a carrier recombination zone from the emitting layer/HBL interface and the suppressed formation of excited-state quenchers in the pT2T HBL, because of the higher electron mobility of pT2T and the better stability of its radical anion state.     

敏化型电致发光器件原理与技术

近年来,高性能荧光有机电致发光器件(FOLEDs)的开发受到了广泛关注。由于荧光材料仅能利用25%的单重态激子辐射发光,FOLEDs的外量子效率(EQE)理论极限为5%。通过能量转移,充分利用主体分子的单重态与三重态激子敏化荧光客体发光,可以提高激子利用率。目前敏化型FOLEDs(SFOLEDs)的最高EQE已达26.1%。本文详细介绍了SFOLEDs的敏化原理和机制,并根据敏化机制的不同,系统地总结了热活化延迟荧光敏化、激基复合物敏化、三重态湮灭敏化和局域电荷转移杂化激发态(HLCT)敏化等各类SFOLEDs的材料与器件结构特点及其研究进展。最后本综述对该类器件的研究前景进行了展望,期待吸引更多专业的研究人员的研究兴趣,进而推动该领域的发展。     

无间隔层结构的高效率荧光/磷光混合型白光有机发光二极管

采用磷光红光/荧光蓝光/磷光绿光无间隔层三发光层结构,制备出了高效率荧光/磷光混合型白光有机发光二极管(OLEDs),其中选取具有高荧光量子产率(PLQY)的荧光染料4P-NPD(双[N-(1-萘基)-N-苯基-氨基]四联苯)作为蓝光发射分子,以及常用的高效磷光染料Ir(MDQ)₂(acac)和Ir(ppy)₃(acac)分别作为红光和绿光的客体,通过混合和掺杂的方法制备了相应的发光层,实现了发光层中激子的有效利用和白光发射。 制备的白光器件最大电流效率和功率效率分别达到了27.1 cd/A和30.3 lm/W,当电压为6 V时,CIE色坐标为(0.33,0.41),显色指数CRI为70,色温CCT为5432 K。 在此基础上,设计制备了高色温的荧光/磷光混合型白光OLEDs,其色温(CCT)达到了7106 K。     

Robust Laminated Anode with an Ultrathin Titanium Nitride Layer for High-Efficiency Top-Emitting Organic Light-Emitting Diodes

The effective reflective anode remains a highly desirable component for the fabrication of reliable top-emitting organic light-emitting diodes (TE-OLEDs) which have the potential to be integrated with complementary metal-oxide-semiconductor (CMOS) circuits for microdisplays. This work demonstrates a novel laminated anode consisting of a Cr/Al/Cr multilayer stack. Furthermore, we implement an ultra-thin titanium nitride (TiN) layer as a protective layer on the top of the Cr/Al/Cr composite anode, which creates a considerably reflective surface in the visible range, and meanwhile improves the chemical stability of the electrode against the atmosphere or alkali environment. Based on [2-(2-pyridinyl-N)phenyl-C](acetylacetonate)iridium(III) as green emitter and Mg/Ag as transparent cathode, our TE-OLED using the TiN-coated anode achieves the maximum current efficiency of 71.2 cd/A and the maximum power efficiency of 66.7 lm/W, which are 81% and 90% higher than those of the reference device without TiN, respectively. The good device performance shows that the Cr/Al/Cr/TiN could function as a promising reflective anode for the high-resolution microdisplays on CMOS circuits.     

氧化铟锡(ITO)自组装修饰及其对有机电致发光器件性能的影响

设计合成了一种新型的有机硅氧烷Cz-Si,并将其用于ITO自组装修饰。制备的Cz-Si具有较好的稳定性,可以在空气中对ITO进行自组装修饰,实验操作简单。为考察ITO自组装修饰对有机电致发光器件性能的影响,分别以修饰后的ITO(ITO/SAM)及不修饰的ITO(unmodified)作阳极,制备了一系列有机电致发光器件ITO/SAM(or unmodified)/NPB(40~50 nm)/Alq₃(60 nm)/LiF(1.0 nm)/Al。实验结果表明,ITO自组装修饰后器件性能可以得到显著提升,研究认为这与其调控ITO/有机层界面的电子能级、粗糙度以及界面一致性有关。     

氧化铟锡(ITO)自组装修饰及其对有机电致发光器件性能的影响

设计合成了一种新型的有机硅氧烷Cz-Si,并将其用于ITO自组装修饰。制备的Cz-Si具有较好的稳定性,可以在空气中对ITO进行自组装修饰,实验操作简单。为考察ITO自组装修饰对有机电致发光器件性能的影响,分别以修饰后的ITO(ITO/SAM)及不修饰的ITO(unmodified)作阳极,制备了一系列有机电致发光器件ITO/SAM(orunmodified)/NPB(40~50nm)/Alq₃(60nm)/LiF(1.0nm)/Al。实验结果表明,ITO自组装修饰后器件性能可以得到显著提升,研究认为这与其调控ITO/有机层界面的电子能级、粗糙度以及界面一致性有关。     

Design of Thermally Activated Delayed Fluorescent Assistant Dopants to Suppress the Nonradiative Component in Red Fluorescent Organic Light-Emitting Diodes

Organic light-emitting diodes are currently under research to achieve high efficiency and long life by using thermally activated delayed fluorescence (TADF) materials. In particular, many studies have focused on ensuring high efficiency in fluorescent devices by introducing TADF materials. Herein, four kinds of orange-colored TADF materials were synthesized and introduced into 5,10,15,20-tetraphenylbisbenz[5,6]indeno[1,2,3-cd:1′,2′,3′-lm]perylene (DBP) red fluorescent devices as assistant dopants. These TADF materials assisted in achieving high efficiency in DBP devices by reducing nonradiative process by Dexter energy transfer and harvesting singlet excitons by a Förster resonance energy transfer process. Among the four TADF materials, 2-(3,5-di-tert-butylphenyl)-6-(9,9-diphenylacridin-10(9H)-yl)-1H-benzo[de]isoquinoline-1,3(2H)-dione (DtBIQAP) showed a higher reverse intersystem crossing rate and a smaller nonradiative rate constant than the other two materials, which can reduce the exciton loss process. As a result, the DtBIQAP-assisted DBP device showed a high maximum external quantum efficiency of 18.2 % and color coordinates of (0.63, 0.37) in red fluorescent organic light-emitting diodes. This study provided a strategy of developing assistant dopants for high external quantum efficiency in TADF-assisted fluorescent devices.     

Imidazo[1,2-a]pyridine as an Electron Acceptor to Construct High-Performance Deep-Blue Organic Light-Emitting Diodes with Negligible Efficiency Roll-Off

Two novel bipolar deep-blue fluorescent emitters, IP-PPI and IP-DPPI, featuring different lengths of the phenyl bridge, were designed and synthesized, in which imidazo[1,2-a]pyridine (IP) and phenanthroimidazole (PI) were proposed as an electron acceptor and an electron donor, respectively. Both of them exhibit outstanding thermal stability and high emission quantum yields. All the devices based on these two materials showed negligible efficiency roll-off with increasing current density. Impressively, non-doped organic light-emitting diodes (OLEDs) based on IP-PPI and IP-DPPI exhibited external quantum efficiencies (EQEs) of 4.85 % and 4.74 % with CIE coordinates of (0.153, 0.097) and (0.154, 0.114) at 10000 cd m⁻², respectively. In addition, the 40 wt % IP-PPI doped device maintained a high EQE of 5.23 % with CIE coordinates of (0.154, 0.077) at 10000 cd m⁻². The doped device based on 20 wt % IP-DPPI exhibited a higher deep-blue electroluminescence (EL) performance with a maximum EQE of up to 6.13 % at CIE of (0.153, 0.078) and maintained an EQE of 5.07 % at 10000 cd m⁻². To the best of our knowledge, these performances are among the state-of-the art devices with CIE_y≤0.08 at a high brightness of 10000 cd m⁻². Furthermore, by doping a red phosphorescent dye Ir(MDQ)₂ (MDQ=2-methyldibenzo[f,h]quinoxaline) into the IP-PPI and IP-DPPI hosts, high-performance red phosphorescent OLEDs with EQEs of 20.8 % and 19.1 % were achieved, respectively. This work may provide a new approach for designing highly efficient deep-blue emitters with negligible roll-off for OLED applications.     

Improved Efficiency Roll-Off and Operational Lifetime of Organic Light-Emitting Diodes with a Tetradentate Platinum(II) Complex by Using an n-Doped Electron-Transporting Layer

The efficiency roll-off and operational lifetime of organic light-emitting diodes (OLEDs) with a tetradentate Pt(II) emitter is improved by engaging an n-doped electron-transporting layer (ETL). Compared to those devices with non-doped ETL, the driving voltage is lowered, the charged carrier is balanced, and the exciton density in the emissive layer (EML) is decreased in the device with n-doped ETL with 8-hydroxyquinolinolatolithium (Liq). High luminance of almost 70,000 cd m⁻² and high current efficiency of 40.5 cd A⁻¹ at high luminance of 10,000 cd m⁻² is achieved in the device with 50 wt%-Liq-doped ETL. More importantly, the extended operational lifetime of 1945 h is recorded at the initial luminance of 1000 cd m⁻² in the 50 wt%-Liq-doped device, which is longer than that of the device with non-doped ETL by almost 10 times. This result manifests the potential application of tetradentate Pt(II) complexes in the OLED industry.