Polymer-Enhanced Capillary Transient Isotachophoresis with Boronic Acid-Functionalized Squarylium Dyes for the Fluorescent Determination of Digoxin and Digoxigenin

Here is reported a new application of polymer-enhanced capillary transient isotachophoresis for the separation and quantification of the drug digoxin and its primary metabolite digoxigenin coupled with laser-induced fluorescence (LIF) detection facilitated by labeling with two boronic acid-functionalized squarylium dyes of different alkyl side chain lengths, SQ-BA1 and SQ-BA2. The conditions for drug–dye complex formation were optimized, as determined by absorbance and fluorescence spectra, according to solution pH and buffer composition. As digoxin has a digitoxose sugar moiety in its structure, it was shown to exhibit better enhancement in the fluorescence intensity of both dyes than digoxigenin, which lacks this moiety, presumably through the formation of a cyclic boronate ester complex. A comparison of analyte labeling in pre-column and on-column modes was conducted in subsequent capillary electrophoresis-LIF studies, with the latter labeling mode yielding superior sensitivity. However, to achieve the complete resolution of labeled digoxin and digoxigenin analytes, it was necessary to use the modified isotachophoresis method, with added borate ions that may differentially interact with the drug and its metabolite, hence affecting their mobilities. Limits of quantification of the method for the determination of digoxin with SQ-BA1 and SQ-BA2 were 2.61?×?10^?3 and 2.82?×?10^?3?M and limits of detection were 7.83?×?10^?4 and 8.47?×?10^?4?M while sensitivities were as great as 5.06?×?10⁹ and 2.89?×?10⁹?M^?1, respectively, indicating that the method is suitable for practical analysis.     

Color Tuning of the Aggregation‐Induced Emission of Maleimide Dyes by Molecular Design and Morphology Control

Aggregation‐induced emission (AIE)‐active maleimide dyes, namely, 2‐p‐toluidino‐N‐p‐tolylmaleimide, 3‐phenyl‐2‐toluidino‐N‐p‐tolylmaleimide, 2‐p‐thiocresyl‐3‐p‐toluidino‐N‐p‐tolylmaleimide, and 2,3‐dithiocresyl‐N‐arylmaleimides, were synthesized by facile synthetic procedures. The dyes show intense emission in the solid state, and emission colors were controlled from green (λ_max=527 nm) to orange (λ_max=609 nm) by varying the substituents at the 2‐ and 3‐positions of the maleimide and the packing structures in the solid state. 2,3‐Disubstituted maleimide dyes effectively underwent redshifts of their emission wavelength. Furthermore, some of the dyes exhibited mechanochromism and polymorphism, and their emission properties were dramatically dependent on the morphology of the solid samples. The mechanisms of the emission behaviors were investigated by X‐ray diffraction. The substituent of the nitrogen atom of the maleimide ring affected the intermolecular interactions and short contacts, which were observed by single crystal X‐ray crystallography, to result in completely different emission properties.     

Impact of Ion-Pairing Effects on Linear and Nonlinear Photophysical Properties of Polymethine Dyes**

The two-photon absorption (2PA) and photophysics of heptamethine dyes featuring cyanine or dipolar electronic structures have been compared for the first time. The perfectly delocalized cyanine system is classically characterized by a two-photon transition matching the vibronic component of its lower energy absorption band. The dipolar species is generated by ion-pairing with a hard counterion in a non-dissociating solvent and displays significant modifications oft he optical properties, including a significant hypochromic shift of absorption, weaker emission and 2PA matching the lower energy transition, thus revealing symmetry breaking within the polymethine electronic structure.     

Remote Effect from Boron Cluster: Tunable Photophysical Properties of o-Carborane-Based Luminogens

We proposed a new molecular design strategy that the o-carboranyl group is attached as “an innocent unit” to the remote side of luminogens to tune photophysical properties. To verify this strategy, two o-carborane-based compounds with asymmetric molecular geometry were designed and synthesized. Photophysical properties of o-carborane-based luminogens were investigated on the basis of UV-Vis spectra, photoluminescence spectra, crystal structure analysis and theoretical calculations. The results indicate that the o-carboranyl group has a slight effect on the energy gap between the ground state (S₀) and the first excited state (S₁) in the solution state but a significant effect on the energy gap between S₀ and S₁ in the solid state. Besides, the radiative and non-radiative transition processes are modulated by the o-carboranyl unit. This leads to emission quenching in the solution state but an enhanced luminous efficiency in the aggregate state with a typical aggregation-induced emission (AIE) property.     

Systematic Studies on the Effect of Fluorine Atoms in Fluorinated Tolanes on Their Photophysical Properties

In this study, we synthesized a series of fluorinated and non-fluorinated tolanes, in which one or more fluorine atoms were systematically introduced into one aromatic ring of a tolane scaffold, and systematically evaluated their photophysical properties. All the tolanes with or without fluorine substituents were found to have poor photoluminescence (PL) in tetrahydrofuran (THF) solutions. On the other hand, in the crystalline state, non-fluorinated and fluorinated tolanes with one or four fluorine atoms were less emissive, whereas fluorinated tolanes with three or five fluorine atoms exhibited high PL efficiencies (Ф_PL) up to 0.51. X-ray crystallographic analyses of the emissive fluorinated tolanes revealed that the position of the fluorine substituent played a key role in achieving a high Ф_PL. Fluorine substituents at the ortho (2/6) and para (4) positions led to tight and rigid packing due to plural π–π stacking and/or hydrogen bonding interactions, resulting in enhanced Ф_PL caused by the suppression of non-radiative deactivation. Additionally, fluorinated tolanes with three fluorine atoms exhibited notable aggregation-induced PL emission enhancement in THF/water mixed solvents. This demonstrates that the PL characteristics of small PL materials can be tuned depending on the usage requirements.     

一个方酸内鎓盐衍生物合成机理的理论研究

用ＰＭ３方法对新近合成的一个方酸内Ｗｅｎｇ盐衍生物：２－（Ｎ,Ｎ－二羟乙基）胺基－４－二甲胺苯基方酸内Ｗｅｎｇ盐的微观反应机理进行了研究,计算结果表明：以（Ｎ,Ｎ－二羟乙基）胺基负离子,二甲胺一方酸制备该方酸内Ｗｅｎｇ盐有邻位和对位两种产物,且对位更易生成,同时,还探讨了提高光致材料产率的可能方法。     

Multinuclear PtII Complexes: Why Three is Better Than Two to Enhance Photophysical Properties

The self-assembly of platinum complexes is a well-documented process that leads to interesting changes of the photophysical and electrochemical behavior as well as to a change in reactivity of the complexes. However, it is still not clear how many metal units must interact in order to achieve the desired properties of a large assembly. This work aimed to clarify the role of the number of interacting Pt^II units leading to an enhancement of the spectroscopic properties and how to address inter- versus intramolecular processes. Therefore, a series of neutral multinuclear Pt^II complexes were synthesized and characterized, and their photophysical properties at different concentration were studied. Going from the monomer to dimers, the growth of a new emission band and the enhancement of the emission properties were observed. Upon increasing the platinum units up to three, the monomeric blue emission could not be detected anymore and a concentration independent bright-yellow/orange emission, due to the establishment of intramolecular metallophilic interactions, was observed.     

Tuning the Halogen Bonding Strength of Cyclic Diaryliodonium Salts

Diaryliodonium(III) salts have recently received increasing interest as a new class of strong halogen bonding noncovalent organocatalysts. Even though this utilization of their Lewis acidity has only been investigated in few studies, their high potential in comparison to classical monovalent iodine based XB donors has become very apparent. So far, only acyclic and cyclic five-membered core structures have been used, and titration studies have shown the latter to be superior in terms of binding constants towards Lewis bases. Herein, we now compare the Lewis acidity and activity of these five-membered iodolium salts with those of six-membered iodininium derivatives. X-Ray structural analyses, ITC measurements and the reaction kinetics of a Ritter-type solvolysis reaction in wet acetonitrile (a typical halogen bond donor benchmark reaction) all demonstrate that iodolium salts are stronger halogen bond donors and catalysts than iodininium salts. Subsequently, we were able to improve the activity of both core structures significantly by introducing electron-withdrawing substituents.     

Towards meso‐Ester BODIPYs with Aggregation‐Induced Emission Properties: The Effect of Substitution Positions

Three meso‐ester boron dipyrromethene (BODIPY) dyes have been synthesized and functionalized with aggregation‐induced emission (AIE)‐active tetraphenylethene or triphenylethene moieties. It was found that functionalizing at the different positions of the BODIPY core resulted in the final dye having different emission properties in response to aggregation: from aggregation‐induced quenching (ACQ) to being AIE active. X‐ray crystallographic analysis was thus performed to provide an explanation for these differences.     

2,3-Diarylbenzo[b]arsole: Structural Modification and Polymerization for Tuning of Photophysical Properties

2,3-Diarylbenzo[b]arsoles were synthesized from zirconacycles and diiodophenylarsine. The structural modification to the luminophore was attained through diarylacetylene precursors, Suzuki–Miyaura coupling, and oxidation of the arsenic atom. The emission properties were controlled according to these modifications. The 2,3-diarylbenzo[b]arsoles showed aggregation-induced emission enhancement; the stronger emission was observed in the solid states than in solutions. In addition, Suzuki–Miyaura polycondensation and olefin metathesis polymerization produced main- and side-chain polymers, respectively. The resultant polymers showed different emission behaviors such as aggregation caused quenching and aggregation induced emission enhancement.     

Recent Advances in the Z/E Isomers of Tetraphenylethene Derivatives: Stereoselective Synthesis,AIE Mechanism,Photophysical Properties,and Application as Chemical Probes

Focused research on the Z/E isomers of tetraphenylethene (TPE) derivatives is scarce in comparison with the thousands of luminogens with AIE properties (AIEgens) that have been synthesized based on the TPE moiety. The similar chemical and physical properties of the Z/E isomers make them difficult to separate by using conventional chromatographic techniques. However, they can be isolated by introducing polar groups and the pure isomers exhibit very different photophysical properties, mechanochromism, and host–guest coordination, as well as assisting in deciphering the AIE mechanism. In this Minireview, we present an overview of the disagreement regarding the AIE mechanism between the restriction of intramolecular vibration and photoinduced Z/E isomerization. Then, we discuss the development of (Z)‐/(E)‐TPE derivatives, their use in host–guest detection, and their mechanoluminescence properties, with a focus on their photophysical characteristics. Finally, we explore the stereoselective synthesis of pure (Z)‐/(E)‐TPE derivatives.     

含不同烷基链四苯基丁二烯衍生物的聚集诱导发光及力致变色性能

设计合成了带有不同长度烷基链、不同极性取代基的四苯基丁二烯(TPB)衍生物TPB-COOCH₃-1~6和TPB-COOH-1~6, 目标化合物均具有显著的聚集诱导发光(AIE)特性及较高的固态荧光量子效率. 烷基链长及取代基极性都会影响目标化合物在聚集时分子排列及分子运动的受限程度, 从而调控其AIE行为. 带有羧酸甲酯的TPB-COOCH₃-1~6中, 丙基取代的TPB-COOCH₃-3在四氢呋喃/水(THF/H₂O)体系中荧光发射增强最为显著; 而羧基取代的TPB-COOH-1~6中, 因亲水性增加, 己基取代的TPB-COOH-6荧光强度增加的倍数最大; 并且, TPB-COOH系列化合物荧光增强的倍数明显低于相同烷基取代的甲酯衍生物TPB-COOCH₃. 此外, 牛血清白蛋白、人血清白蛋白和带有羧基的AIE化合物掺杂时明显影响其固态时的发光及其力致变色性质, 尤其是研磨后会明显提高其荧光强度.     

Effects of Amino Group Substitution on the Photophysical Properties and Stability of Near-Infrared Fluorescent P-Rhodamines

A series of phosphine oxide-bridged rhodamines (P-rhodamines) bearing various acyclic and cyclic amine moieties, including dimethyl- and diethylamine, azetidine, pyrrolidine and 7-azabicyclo[2,2,1]heptane (7ABH), have been synthesized. The photophysical properties as well as chemical and photostability of these dyes have been studied in detail. Among these dyes, the 7ABH-substituted dye shows stronger fluorescence in the near-infrared (NIR) region, relative to the other P-rhodamines. This dye could be applied to live-cell imaging, wherein lysosomes were selectively stained in a pH-independent manner. It was also found that the ring fusion of the amine moieties gives rise to remarkably redshifted spectra, with absorption and emission maxima at 770 and 820 nm, respectively, spectrally close to that of indocyanine green (ICG). Importantly, the ring-fused P-rhodamines showed much higher photostability than ICG, indicative of their promising utility as the NIR-emissive dyes.     

Theoretical Insight into the Origin of Large Stokes Shift and Photophysical Properties of Anilido‐Pyridine Boron Difluoride Dyes

The geometric and electronic structures and photophysical properties of anilido‐pyridine boron difluoride dyes 1 – 4 , a series of scarce 4,4‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐indacene (BODIPY) derivatives with large Stokes shift, are investigated by employing density functional theory (DFT) and time‐dependent DFT (TD‐DFT) calculations to shed light on the origin of their large Stokes shifts. To this end, a suitable functional is first determined based on functional tests and a recently proposed index—the charge‐transfer distance. It is found that PBE0 provides satisfactory overall results. An in‐depth insight into Huang–Rhys (HR) factors, Wiberg bond indices, and transition density matrices is provided to scrutinize the geometric distortions and the character of excited states pertaining to absorption and emission. The results show that the pronounced geometric distortion due to the rotation of unlocked phenyl groups and intramolecular charge transfer are responsible for the large Stokes shift of 1 and 2 , while 3 shows a relatively blue‐shifted emission wavelength due to its mild geometric distortion upon photoemission, although it has a comparable energy gap to 1 . Finally, compound 4 , which is designed to realize the rare red emission in BODIPY derivatives, shows desirable and expected properties, such as high Stokes shift (4847 cm^?1), red emission at 660 nm, and reasonable fluorescence efficiency. These properties give it great potential as an ideal emitter in organic light‐emitting diodes. The theoretical results could complement and assist in the development of BODIPY‐based dyes with both large Stokes shift and high quantum efficiency.     

Photophysical and Electrochemical Properties,and Molecular Structures of Organic Dyes for Dye‐Sensitized Solar Cells

Dye‐sensitized solar cells (DSSCs) based on organic dyes adsorbed on oxide semiconductor electrodes, such as TiO₂, ZnO, or NiO, which have emerged as a new generation of sustainable photovoltaic devices, have attracted much attention from chemists, physicists, and engineers because of enormous scientific interest in not only their construction and operational principles, but also in their high incident‐solar‐light‐to‐electricity conversion efficiency and low cost of production. To develop high‐performance DSSCs, it is important to create efficient organic dye sensitizers, which should be optimized for the photophysical and electrochemical properties of the dyes themselves, with molecular structures that provide good light‐harvesting features, good electron communication between the dye and semiconductor electrode and between the dye and electrolyte, and to control the molecular orientation and arrangement of the dyes on a semiconductor surface. The aim of this Review is not to make a list of a number of organic dye sensitizers developed so far, but to provide a new direction in the epoch‐making molecular design of organic dyes for high photovoltaic performance and long‐term stability of DSSCs, based on the accumulated knowledge of their photophysical and electrochemical properties, and molecular structures of the organic dye sensitizers developed so far.     

Tuning the Solid‐State Luminescence of BODIPY Derivatives with Bulky Arylsilyl Groups: Synthesis and Spectroscopic Properties

Boron dipyrromethenes (BODIPYs) with bulky triphenylsilylphenyl(ethynyl) and triphenylsilylphenyl substituents on pyrrole sites were prepared via Hagihara–Sonogashira and Suzuki–Miyaura cross‐coupling with ethynyl‐terminated tetraphenylsilane and boronic acid‐terminated tetraphenylsilane. The chromophores are designed to prevent intermolecular π–π stacking interaction and enhance fluorescence in the solid state. Single crystals of 1 a and 2 b for X‐ray structural analysis were obtained, and weak π–π stacking interactions of the neighboring BODIPY molecules were observed. Spectroscopic properties of all of the dyes in various solvents and in films were investigated. Triphenylsilylphenyl‐substituted BODIPYs generally show more pronounced increases in solid‐state emission than triphenylsilylphenyl(ethynyl)‐substituted BODIPYs. Although the simple BODIPYs do not exhibit any fluorescence in the solid state (Φ=0), arylsilyl‐substituted BODIPYs exhibit weak to moderate solid‐state fluorescence with quantum yields of 0.03, 0.07, 0.10, and 0.25. The structure–property relationships were analyzed on the basis of X‐ray crystallography, optical spectroscopy, cyclic voltammetry, and theoretical calculations.     

Squaraine Dyes: Interaction with Bovine Serum Albumin to Investigate Supramolecular Adducts with Aggregation‐Induced Emission (AIE) Properties

Bovine serum albumin (BSA)–squaraine supramolecular adducts with aggregation‐induced emission (AIE) properties were prepared and characterized by spectroscopic methods. While squaraine dyes showed a very low fluorescence quantum yield in water, a great enhancement in the fluorescence of the aggregated BSA adducts was achieved due to the abnormal aggregation‐induced emission properties of squaraines. The adducts formation was studied from a kinetic point of view showing unexpected structure–properties relationships.     

卤素原子的引入对二苯甲基自由基光稳定性、光物理性质及电致发光器件性能的影响

通过在N-咔唑基-二(2,4,6-三氯苯)甲基自由基(Cz BTM)的咔唑基团的3和6位引入卤素原子,合成了3个新的自由基分子(3,6-二氟-N-咔唑基)二(2,4,6-三氯苯)甲基自由基(F₂CzBTM)、(3,6-二氯-N-咔唑基)二(2,4,6-三氯苯)甲基自由基(Cl₂CzBTM)及(3,6-二溴-N-咔唑基)二(2,4,6-三氯苯)甲基自由基(Br₂CzTM).通过对比3个自由基分子与CzBTM的理论计算结果、电化学性质、光物理性质以及光稳定性,发现对于电子给-受体型的发光自由基,其光物理性质是外围取代基团的电负性和分子空间构型共同作用的结果.Cl₂CzBTM和Br₂CzTM具有较高的光致发光荧光量子效率,而F₂CzBTM在光照下具有最长的光致发光半衰期.与以CzBTM为发光层制备的电致发光器件相比,以Cl₂CzBTM和Br₂CzTM为发光层制备的有机电致发光器件的光谱均发生了蓝移,器件的最大外量子效率...     

Luminescence Color Tuning from Blue to Near Infrared of Stable Luminescent Solid Materials Based on Bis‐o‐Carborane‐Substituted Oligoacenes

Aryl‐substituted o ‐carboranes have shown highly efficient solid‐state emission in previous studies. To demonstrate color tuning of the solid‐state emission in an aryl‐o ‐carborane‐based system, bis‐o ‐carborane‐substituted oligoacenes were synthesized and their properties were systematically investigated. Optical and electrochemical measurements revealed efficient decreases in energy band gaps and lowest unoccupied molecular orbital (LUMO) levels by adding a number of fused benzene rings for the extension of π‐conjugation. As a consequence, bright solid‐state emission was observed in the region from blue to near infrared (NIR). Furthermore, various useful features were obtained from the modified o ‐carboranes as an optical material. The naphthalene derivatives exhibited aggregation‐induced emission (AIE) and almost 100 % quantum efficiency in the crystalline state. Furthermore, it was shown that the tetracene derivative with NIR‐emissive properties had high durability toward photo‐bleaching under UV irradiation.