Hybrid Transition-Metal Oxide and Nitride@N-Doped Reduced Graphene Oxide Electrodes for High-Performance,Flexible, and All-Solid-State Supercapacitors

Nanoscale composites for high-performance electrodes employed in flexible, all-solid-state supercapacitors are being developed. A series of binder-free composites, each consisting of a transition bimetal oxide, a metal oxide, and a metal nitride grown on N-doped reduced graphene oxide (rGO)-wrapped nickel foam are obtained by using a universal strategy. Three different transition metals, Co, Mo, and Fe, are separately compounded with nickel ions, which originate from the nickel foam, to form three composites, NiCoO₂@Co₃O₄@Co₂N, NiMoO₄@MoO₃@Mo₂N, and NiFe₂O₄@Fe₃O₄@Fe₂N, respectively. These as-prepared active materials have similar regular variation patterns in their properties, including better conductivity and battery-mimicking pseudocapacitance, which result in their high whole-electrode capacitance performance [2598.3 F g⁻¹ (39.85 F cm⁻²), 3472.6 F g⁻¹ (41.43 F cm⁻²) and 1907.5 F g⁻¹ (3.41 F cm⁻²) for the composites incorporating Co, Mo, and Fe, respectively]. The as-assembled flexible, all-solid-state NiCoO₂@Co₃O₄@Co₂N//KOH/PVA//NiCoO₂@Co₃O₄@Co₂N device can be easily bent and exhibits high energy density and power density of 92.8 Wh kg⁻¹ and 1670.4 W kg⁻¹, respectively. The universality of this design strategy could allow it to be employed in producing hybrid materials for high-performance energy-storage devices.     

Facile In Situ Synthesis of Hierarchical Porous Ni/Ni(OH)2 Hybrid Sponges with Excellent Electrochemical Energy‐Storage Performances for Supercapacitors

Herein, we report the in situ growth of single‐crystalline Ni(OH)₂ nanoflakes on a Ni support by using facile hydrothermal processes. The as‐prepared Ni/Ni(OH)₂ sponges were well‐characterized by using X‐ray diffraction (XRD), SEM, TEM, and X‐ray photoelectron spectroscopy (XPS) techniques. The results revealed that the nickel‐skeleton‐supported Ni(OH)₂ rope‐like aggregates were composed of numerous intercrossed single‐crystal Ni(OH)₂ flake‐like units. The Ni/Ni(OH)₂ hybrid sponges served as electrodes and displayed ultrahigh specific capacitance (SC=3247 F g^?1) and excellent rate‐capability performance, likely owing to fast electron and ion transport, sufficient Faradic redox reaction, and robust structural integrity of the Ni/Ni(OH)₂ hybrid electrode. These results support the promising application of Ni(OH)₂ nanoflakes as advanced pseudocapacitor materials.     

Hierarchically Porous Nickel Oxide Nanosheets Grown on Nickel Foam Prepared by One‐Step In Situ Anodization for High‐Performance Supercapacitors

Porous NiO nanosheets are successfully grown on nickel foam substrate through an in situ anodization by using molten KOH as the electrolyte. High‐purity NiO is directly obtained by this one‐step method without any subsequent treatment. The obtained NiO supported on nickel foam is used as a binder‐free electrode for a supercapacitor and its pseudocapacitive behavior has been investigated by cyclic voltammetry and galvanostatic charge–discharge tests in a 6 M aqueous solution of KOH. Electrochemical data demonstrates that this binder‐free electrode possesses ultrahigh capacitance (4.74 F cm^?2 at 4 mA cm^?2), excellent rate capability, and cycling stability. After 1000 cycles, the areal capacitance value is 9.4 % lower than the initial value and maintains 85.4 % of the maximum capacitance value.     

Hollow 3D Frame Structure Modified with NiCo2S4 Nanosheets and Spinous Fe2O3 Nanowires as Electrode Materials for High-Performance All-Solid-State Asymmetric Supercapacitors

Supercapacitors have attracted tremendous research interest, since they are expected to achieve battery-level energy density, while having a long calendar life and short charging time. Herein, a novel asymmetric supercapacitor has been successfully assembled from NiCo₂S₄ nanosheets and spinous Fe₂O₃ nanowire modified hollow melamine foam decorated with polypyrrole as positive and negative electrodes, respectively. Owing to the well-designed nanostructure and suitable matching of electrode materials, the assembled asymmetric supercapacitor (ASC) exhibits an extended operation voltage window of 1.6 V with an energy density of 20.1 Wh kg⁻¹ at a power density of 159.4 kW kg⁻¹. Moreover, the ASC shows stable cycling stability, with 81.3 % retention after 4000 cycles and a low internal resistance of 1.03 Ω. Additionally, a 2.5 V light-emitting diode indicator can be lit up by three ASCs connected in series; this provides evidence of the practical application potential of the assembled energy-storage system. The excellent electrochemical performances should be credited to the significant enhancement of the specific surface area, charge transport, and mechanical stability resulting from the unique 3D morphology.     

Metal Oxide Nanostructures Generated from In Situ Sacrifice of Zinc in Bimetallic Textures as Flexible Ni/Fe Fast Battery Electrodes

An “in situ sacrifice” process was devised in this work as a room‐temperature, all‐solution processed electrochemical method to synthesize nanostructured NiO_x and FeO_x directly on current collectors. After electrodepositing NiZn/FeZn bimetallic textures on a copper net, the zinc component is etched and the remnant nickel/iron are evolved into NiO_x and FeO_x by the “in situ sacrifice” activation we propose. As‐prepared electrodes exhibit high areal capacities of 0.47 mA h cm⁻² and 0.32 mA h cm⁻², respectively. By integrating NiO_x as the cathode, FeO_x as the anode, and poly(vinyl alcohol) (PVA)‐KOH gel as the separator/solid‐state electrolyte, the assembled quasi‐solid‐state flexible battery delivers a volumetric capacity of 6.91 mA h cm⁻³ at 5 mA cm⁻², along with a maximum energy density of 7.40 mWh cm⁻³ under a power density of 0.27 W cm⁻³ and a maximum tested power density of 3.13 W cm⁻³ with a 2.17 mW h cm⁻³ energy density retention. Our room‐temperature synthesis, which only consumes minute electricity, makes it a promising approach for large‐scale production. We also emphasize the in situ sacrifice zinc etching process used in this work as a general strategy for metal‐based nanostructure growth for high‐performance battery materials.     

Hierarchical FeCo2S4@FeNi2S4 Core/Shell Nanostructures on Ni Foam for High-Performance Supercapacitors

The design of electrode materials with rational core/shell structures is promising for improving the electrochemical properties of supercapacitors. Hence, hierarchical FeCo₂S₄@FeNi₂S₄ core/shell nanostructures on Ni foam were fabricated by a simple hydrothermal method. Owing to their structure and synergistic effect, they deliver an excellent specific capacitance of 2393 F g⁻¹ at 1 A g⁻¹ and long cycle lifespan as positive electrode materials. An asymmetric supercapacitor device with FeCo₂S₄@FeNi₂S₄ as positive electrode and graphene as negative electrode exhibited a specific capacitance of 133.2 F g⁻¹ at 1 A g⁻¹ and a high energy density of 47.37 W h kg⁻¹ at a power density of 800 W kg⁻¹. Moreover, the device showed remarkable cycling stability with 87.0 % specific-capacitance retention after 5000 cycles at 2 A g⁻¹. These results demonstrate that the hierarchical FeCo₂S₄@FeNi₂S₄ core/shell structures have great potential in the field of electrochemical energy storage.     

NiCo2S4@碳纳米管构筑柔性薄膜电极的制备及其电化学性能

以浮动催化化学气相沉积致密超薄碳纳米管薄膜(CNTF)为基体,通过两步酸处理使薄膜内制备的碳纳米管(CNT)分开并赋予其活性官能团,CNTF由超疏水转变为超亲水性,然后在CNT表面生长均匀的前驱体包覆层,离子进入超亲水薄膜内部确保了高负载量,最后进行液相硫化制得NiCo_2S_4@碳纳米管构筑柔性薄膜(NiCo_2S_4@CNTF)电极。利用扫描电子显微镜、X射线衍射等对产物进行了表征,证明优化产物为NiCo_2S_4均匀包覆多壁CNT构筑而成的三维网状柔性复合薄膜,单根CNT的表面是NiCo_2S_4纳米粒子构成、厚度约70 nm的粗糙包覆层。该复合薄膜比电容达到270.3 mF·cm-2,即使在高电流密度2.5 mA·cm-2下充放电循环10 000次后仍保持很好的可逆性,电容保持率达93%,库伦效率持续稳定在92%附近;重复大变形(弯曲、折叠、卷曲)后能保持结构完整性和性能稳定性。同时,探讨了电化学性能与结构间的关系,并揭示了性能增强的内在机理。     

Hierarchical NiCo2S4 Nanotube@NiCo2S4 Nanosheet Arrays on Ni Foam for High‐Performance Supercapacitors

Hierarchical NiCo₂S₄ nanotube@NiCo₂S₄ nanosheet arrays on Ni foam have been successfully synthesized. Owing to the unique hierarchical structure, enhanced capacitive performance can be attained. A specific capacitance up to 4.38 F cm^?2 is attained at 5 mA cm^?2, which is much higher than the specific capacitance values of NiCo₂O₄ nanosheet arrays, NiCo₂S₄ nanosheet arrays and NiCo₂S₄ nanotube arrays on Ni foam. The hierarchical NiCo₂S₄ nanostructure shows superior cycling stability; after 5000 cycles, the specific capacitance still maintains 3.5 F cm^?2. In addition, through the morphology and crystal structure measurement after cycling stability test, it is found that the NiCo₂S₄ electroactive materials are gradually corroded; however, the NiCo₂S₄ phase can still be well‐maintained. Our results show that hierarchical NiCo₂S₄ nanostructures are suitable electroactive materials for high performance supercapacitors.     

In Situ Growth of MnO2 Nanosheets on N‐Doped Carbon Nanotubes Derived from Polypyrrole Tubes for Supercapacitors

Nitrogen‐doped porous carbon nanotubes@MnO₂ (N‐CNTs@MnO₂) nanocomposites are prepared through the in situ growth of MnO₂ nanosheets on N‐CNTs derived from polypyrrole nanotubes (PNTs). Benefiting from the synergistic effects between N‐CNTs (high conductivity and N doping level) and MnO₂ nanosheets (high theoretical capacity), the as‐prepared N‐CNTs@MnO₂‐800 nanocomposites show a specific capacitance of 219 F g^?1 at a current density of 1.0 A g^?1, which is higher than that of pure MnO₂ nanosheets (128 F g^?1) and PNTs (42 F g^?1) in 0.5 m Na₂SO₄ solution. Meanwhile, the capacitance retention of 86.8 % (after 1000 cycles at 10 A g^?1) indicates an excellent electrochemical performance of N‐CNTs@MnO₂ prepared in this work.     

Rational Design of Porous Structured Nickel Manganese Sulfides Hexagonal Sheets-in-Cage Structures as an Advanced Electrode Material for High-Performance Electrochemical Capacitors

The design of hierarchical electrodes comprising multiple components with a high electrical conductivity and a large specific surface area has been recognized as a feasible strategy to remarkably boost pseudocapacitors. Herein, we delineate hexagonal sheets-in-cage shaped nickel–manganese sulfides (Ni-Mn-S) with nanosized open spaces for supercapacitor applications to realize faster redox reactions and a lower charge-transfer resistance with a markedly enhanced specific capacitance. The hybrid was facilely prepared through a two-step hydrothermal method. Benefiting from the synergistic effect between Ni and Mn active sites with the improvement of both ionic and electric conductivity, the resulting Ni-Mn-S hybrid displays a high specific capacitance of 1664 F g⁻¹ at a current density of 1 A g⁻¹ and a capacitance of 785 F g⁻¹ is maintained at a current density of 50 A g⁻¹, revealing an outstanding capacity and rate performance. The asymmetric supercapacitor device assembled with the Ni-Mn-S hexagonal sheets-in-cage as the positive electrode delivers a maximum energy density of 40.4 Wh kg⁻¹ at a power density of 750 W kg⁻¹. Impressively, the cycling retention of the as-fabricated device after 10 000 cycles at a current density of 10 A g⁻¹ reaches 85.5 %. Thus, this hybrid with superior capacitive performance holds great potential as an effective charge-storage material.     

Fabrication of Polyaniline/Graphene/Polyester Textile Electrode Materials for Flexible Supercapacitors with High Capacitance and Cycling Stability

Vertical polyaniline (PANI) nanowire arrays on graphene‐sheet‐coated polyester cloth (RGO/PETC) were fabricated by the in situ chemical polymerization of aniline. The 3D conductive network that was formed by the graphene sheets greatly enhanced the conductivity of PANI/RGO/PETC and improved its mechanical stability. PANI nanowire arrays increased the active surface area of PANI, whilst the hierarchically porous structure of the PANI/RGO/PETC electrode facilitated the diffusion of the electrolyte ions. Electrochemical measurements showed that the composite electrode exhibited a maximum specific capacitance of 1293 F g^?1 at a current density of 1 A g^?1. Capacitance retention was greater than 95 %, even after 3000 cycles, which indicated that the electrode material has excellent cycling stability. Moreover, the electrode structure endowed the PANI/RGO/PETC electrode with a stable electrochemical performance under mechanical bending and stretching.     

NiO-MgO固溶体的形成对Ni/MgO-AN催化CO2重整CH4反应活性和稳定性的影响

 以在流动N2中热处理的Mg(OH)2醇凝胶制得的纳米氧化镁(MgO-AN)为载体,浸渍Ni(NO3)2后经不同温度焙烧得到Ni含量为8.8%的NiO/MgO样品,还原后制得Ni/MgO-AN催化剂. 采用XRD和TPR技术对NiO和MgO之间形成的NiO-MgO固溶体进行了表征,并将Ni/MgO-AN催化剂用于催化CO2重整CH4反应. 结果表明,在低于650 ℃焙烧时, NiO不能完全溶入MgO中,NiO/MgO样品中存在自由的NiO粒子,还原态Ni/MgO-AN催化剂在CO2重整CH4反应中的稳定性低; 当样品焙烧温度等于或高于650 ℃时,NiO可以完全溶入MgO中形成NiO-MgO固溶体,还原态Ni/MgO-AN催化剂具有高稳定性.     

MnO2 Nanosheets Grown on Nitrogen‐Doped Hollow Carbon Shells as a High‐Performance Electrode for Asymmetric Supercapacitors

A hierarchical hollow hybrid composite, namely, MnO₂ nanosheets grown on nitrogen‐doped hollow carbon shells (NHCSs@MnO₂), was synthesized by a facile in situ growth process followed by calcination. The composite has a high surface area (251 m²g^?1) and mesopores (4.5 nm in diameter), which can efficiently facilitate transport during electrochemical cycling. Owing to the synergistic effect of NHCSs and MnO₂, the composite shows a high specific capacitance of 306 F g^?1, good rate capability, and an excellent cycling stability of 95.2 % after 5000 cycles at a high current density of 8 A g^?1. More importantly, an asymmetric supercapacitor (ASC) assembled by using NHCSs@MnO₂ and activated carbon as the positive and negative electrodes exhibits high specific capacitance (105.5 F g^?1 at 0.5 A g^?1 and 78.5 F g^?1 at 10 A g^?1) with excellent rate capability, achieves a maximum energy density of 43.9 Wh kg^?1 at a power density of 408 W kg^?1, and has high stability, whereby the ASC retains 81.4 % of its initial capacitance at a current density of 5 A g^?1 after 4000 cycles. Therefore, the NHCSs@MnO₂ electrode material is a promising candidate for future energy‐storage systems.     

In Situ Synthesis of CoCeSx Bimetallic Sulfide Nanoparticles on a Bi-Pyrene Terminated Molecular Wire Modified Graphene Surface for Supercapacitors

The excellent electrical conductivity of graphene is due to its highly-conjugated structures. Manipulation of the electronic and mechanical properties of graphene can be achieved by controlling the destruction of its in-sheet conjugation system. Herein, we report the preparation of CoCeS_x−SA@BPMW@RGO through π-π stacking interactions at the molecular level. In this study, sodium alginate was reacted with Co²⁺ and Ce³⁺, and the composite was loaded onto a graphene surface. The graphene sheets were prepared using a bi-pyrene terminated molecular wire (BPMW) to avoid re-stacking of the grapheme sheets, thereby forming nanoscale spaces between sheets. The angle between the BPMW coplanar pyrene group and the phenyl group was 33.2°, and the graphene layer is supported in an oblique direction. Finally, a three-dimensional porous composite was obtained after annealing and vulcanization. The obtained CoCeS_x−SA@BPMW@RGO exhibited excellent electrical conductivity and remarkable cycle stability. When the current density was 1 A g⁻¹, its specific capacitance was as high as 1004 F g⁻¹. BPMW modifies graphene through the synergistic effect of π-π stacking interaction and special structure to obtain excellent electrochemical performance. Moreover, a solid-state asymmetric supercapacitor device was fabricated based on the synthesized CoCeS_x−SA@BPMW@RGO hybrid, which exhibited a power density of 979 W kg⁻¹ at an energy density of 23.96 Wh kg⁻¹.     

A Microwave Synthesis of Mesoporous NiCo2O4 Nanosheets as Electrode Materials for Lithium‐Ion Batteries and Supercapacitors

A facile microwave method was employed to synthesize NiCo₂O₄ nanosheets as electrode materials for lithium‐ion batteries and supercapacitors. The structure and morphology of the materials were characterized by X‐ray diffraction, field‐emission scanning electron microscopy, transmission electron microscopy and Brunauer–Emmett–Teller methods. Owing to the porous nanosheet structure, the NiCo₂O₄ electrodes exhibited a high reversible capacity of 891 mA h g^?1 at a current density of 100 mA g^?1, good rate capability and stable cycling performance. When used as electrode materials for supercapacitors, NiCo₂O₄ nanosheets demonstrated a specific capacitance of 400 F g^?1 at a current density of 20 A g^?1 and superior cycling stability over 5000 cycles. The excellent electrochemical performance could be ascribed to the thin porous structure of the nanosheets, which provides a high specific surface area to increase the electrode–electrolyte contact area and facilitate rapid ion transport.     

In Situ Growth of Hierarchical SnO2 Nanosheet Arrays on 3D Macroporous Substrates as High‐Performance Electrodes

Finding out how to overcome the self‐aggregation of nanostructured electrode materials is a very important issue in lithium‐ion battery technology. Herein, by an in situ construction strategy, hierarchical SnO₂ nanosheet architectures have been fabricated on a three‐dimensional macroporous substrate, and thus the aggregation of the SnO₂ nanosheets was effectively prevented. The as‐prepared hierarchical SnO₂ nanoarchitectures on the nickel foam can be directly used as an integrated anode for lithium‐ion batteries without the addition of other ancillary materials such as carbon black or binder. In view of their apparent advantages, such as high electroactive surface area, ultrathin sheet, robust mechanical strength, shorter ion and electron transport path, and the specific macroporous structure, the hierarchical SnO₂ nanosheets exhibit excellent lithium‐storage performance. Our present growth approach offers a new technique for the design and synthesis of metal oxide hierarchical nanoarrays that are promising for electrochemical energy‐storage electrodes without carbon black and binder.     

在碳纤维布上原位生长NiCo层状双氢氧化物纳米片用于高性能非对称超级电容器

通过恒电压电沉积法在不同的碳纤维基体上原位制备NiCo层状双金属氢氧化物(NiCo-LDH)复合材料(NiCo-LDH/碳纤维布),该方法 无需粘合剂,可以有效避免由于粘合剂的加入引起的导电性降低.在NiCo-LDH的层状晶体结构中,正电荷的主体层和层间电荷补偿阴离子可以促进电极材料之间的离子扩散,从而可高效利用活性位...     

Mesoporous MnCo2O4 with a Flake‐Like Structure as Advanced Electrode Materials for Lithium‐Ion Batteries and Supercapacitors

A mesoporous flake‐like manganese‐cobalt composite oxide (MnCo₂O₄) is synthesized successfully through the hydrothermal method. The crystalline phase and morphology of the materials are characterized by X‐ray diffraction, field‐emission scanning electron microscopy, transmission electron microscopy, and Brunauer–Emmett–Teller methods. The flake‐like MnCo₂O₄ is evaluated as the anode material for lithium‐ion batteries. Owing to its mesoporous nature, it exhibits a high reversible capacity of 1066 mA h g^?1, good rate capability, and superior cycling stability. As an electrode material for supercapacitors, the flake‐like MnCo₂O₄ also demonstrates a high supercapacitance of 1487 F g^?1 at a current density of 1 A g^?1, and an exceptional cycling performance over 2000 charge/discharge cycles.     

Monometallic Ni0 and Heterobimetallic Ni0/AuI Complexes of Tripodal Phosphine Ligands: Characterization in Solution and in the Solid State and Catalysis

The tridentate chelate nickel complexes [(CO)Ni{(PPh₂CH₂)₃CMe}] ( 2 ), [(CO)Ni{(PPh₂CH₂CH₂)₃SiMe}] ( 6 ), and [Ph₃PNi{(PPh₂CH₂CH₂)₃SiMe}] ( 7 ), as well as the bidentate complex [(CO)₂Ni{(PPh₂CH₂)₂CMeCH₂PPh₂}] ( 3 ) and the heterobimetallic complex [(CO)₂Ni{(PPh₂CH₂)₂CMeCH₂Ph₂PAuCl}] ( 4 ), have been synthesized and fully characterized in solution. All ¹H and ¹³C NMR signal assignments are based on 2D‐NMR methods. Single crystal X‐ray structures have been obtained for all complexes. Their ³¹P CP/MAS (cross polarization with magic angle spinning) NMR spectra have been recorded and the isotropic lines identified. The signals were assigned with the help of their chemical shift anisotropy (CSA) data. All complexes have been tested regarding their catalytic activity for the cyclotrimerization of phenylacetylene. Whereas complexes 2 – 4 display low catalytic activity, complex 7 leads to quantitative conversion of the substrate within four hours and is highly selective throughout the catalytic reaction.     

In Situ Reconstruction of a Hierarchical Sn-Cu/SnOx Core/Shell Catalyst for High-Performance CO2 Electroreduction

The electrochemical CO₂ reduction reaction (CO₂RR) to give C₁ (formate and CO) products is one of the most techno-economically achievable strategies for alleviating CO₂ emissions. Now, it is demonstrated that the SnO_x shell in Sn_2.7Cu catalyst with a hierarchical Sn-Cu core can be reconstructed in situ under cathodic potentials of CO₂RR. The resulting Sn_2.7Cu catalyst achieves a high current density of 406.7±14.4 mA cm⁻² with C₁ Faradaic efficiency of 98.0±0.9 % at −0.70 V vs. RHE, and remains stable at 243.1±19.2 mA cm⁻² with a C₁ Faradaic efficiency of 99.0±0.5 % for 40 h at −0.55 V vs. RHE. DFT calculations indicate that the reconstructed Sn/SnO_x interface facilitates formic acid production by optimizing binding of the reaction intermediate HCOO* while promotes Faradaic efficiency of C₁ products by suppressing the competitive hydrogen evolution reaction, resulting in high Faradaic efficiency, current density, and stability of CO₂RR at low overpotentials.