Facile method to prepare monodispersed Ag/polystyrene composite microspheres and their properties

This article presents a facile method to prepare silver/polystyrene composite microspheres. In this approach, monodispersed polystyrene (PS) particles were synthesized with carboxyl acid groups on the surfaces of the PS particles via dispersion polymerization at first. With the addition of [Ag(NH₃)₂]⁺ to the PS dispersion, [Ag(NH₃)₂]⁺ was absorbed to the surfaces of the PS particles, and then by heating the system, [Ag(NH₃)₂]⁺ complex ions were reduced to silver to form the Ag/PS composite microspheres. In the synthesis of PS dispersion, PVP was used as dispersant to stabilize the PS particles, it also acted as reducing agent in the reduction of [Ag(NH₃)₂]⁺ complex ions to silver, so no additional reducing agent was needed. The resulting composite microspheres were characterized by TEM, SEM, XPS, and XRD. The catalytic properties and surface‐enhance Raman scattering (SERS) was studied as well. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4547–4554, 2009     

Cobalt(II) Oxide Solubility and Phase Stability in Alkaline Media at Elevated Temperatures

A platinum-lined, flowing autoclave facility was used to investigate the solubility behavior of cobalt(II) oxide (CoO) in deoxygenated ammonium and sodium hydroxide solutions between 22 and 288°C. Co(II) ion activity in aqueous solution was controlled by a hydrous Co(II) oxide when nitrogen was used for deoxygenation and by metallic cobalt when hydrogen was used. Measured cobalt solubilities are interpreted using a Co(II) ion hydroxo- and amminocomplexing model and thermodynamic functions for these equilibria were obtained from a least-squares analysis of the data. A common set of thermodynamic properties for the species Co(OH)⁺, Co(OH)₂(aq) and Co(OH)(NH₃)⁺ is provided to permit accurate cobalt oxide solubility calculations over broad ranges of temperature and alkalinity.     

Preparation,characterization and heterogeneous catalytic applications of GO/Fe3O4/HPW nanocomposite in chemoselective and green oxidation of alcohols with aqueous H2O2

Graphene oxide ‐ Fe₃O₄ ‐ NH₃⁺H₂PW₁₂O₄₀ ^‐ magnetic nanocomposite (GO/Fe₃O₄/HPW) was prepared by linking amino ‐ functionalized Fe₃O₄ nanoparticles (Fe₃O₄ ‐ NH₂) on the graphene oxide (GO), and then grafting 12 ‐ tungstophosphoric acid (H₃PW₁₂O₄₀) on the graphene oxide ‐ magnetite hybrid (GO ‐ Fe₃O₄ ‐ NH₂). The obtained GO/Fe₃O₄/HPW nanocomposite was well characterized with different techniques such as FT ‐ IR, TEM, SEM, XRD, EDX, TGA ‐ DTA, AGFM, ICP and BET measurements. The used techniques showed that the graphene oxide layers were well prepared and the various stages of preparation of the GO/Fe₃O₄/HPW nanocomposites successfully completed. This new nanocomposite displayed excellent performance as a heterogeneous catalyst in the oxidation of alcohols with H₂O₂. The as ‐ prepared GO/Fe₃O₄/HPW catalyst was more stable and recyclable at least five times without significantly reducing its catalytic activity.     

Synthesis of Ultrastable Ag Nanoplates/Polyethylenimine–Reduced Graphene Oxide and Its Application as a Versatile Electrochemical Sensor

Investigations on Ag nanostructures/reduced graphene oxide composites have been frequently reported, yet the morphology control of those loaded Ag nanocrystals is still challenging. We herein develop a facile method to grow triangular Ag nanoplates (AgP) on polyethylenimine‐modified reduced graphene oxide (AgP/PEI‐rGO). The AgP/PEI‐rGO hybrids show unexpected high stability against chloride ions (Cl^?) and hydrogen peroxide (H₂O₂), which is possibly due to the strong interaction between surface Ag atoms with the amine groups of PEI. In the chronoamperometry measurements for detecting H₂O₂, N₂H₄, and NaNO₂, the AgP/PEI‐rGO hybrid shows very wide linear ranges (usually 10^?6–10^?2 mol L^?1 for H₂O₂, N₂H₄, and NaNO₂) and low detection limits (down to ≈1×10^?7 mol L^?1), which demonstrate the promising electrochemical sensor applications of these metal/graphene hybrids with well‐defined morphologies and facets. In addition, this strategy could be extended to the deposition of other noble metals on rGO with controlled morphologies.     

Syntheses, structures and properties of silver(I) complexes with flexible 1,3,5-tris(pyridylmethoxyl)benzene ligands

Five new silver(I) complexes [Ag₂(L₂)₂](BF₄)₂·CH₃CN·CH₃OH (1), [Ag(L₂)(CF₃SO₃)] (2), [Ag(L₃)]ClO₄·CH₃OH (3), [Ag₂(L₃)₂](CF₃SO₃)₂·CH₃CN·CH₃OH·H₂O (4) and [Ag(L₃)]PF₆·2CH₃CN (5) [L₂=1,3,5-tris(2-pyridylmethoxyl)benzene, L₃=1,3,5-tris(3-pyridylmethoxyl)benzene] were synthesized and characterized by single crystal X-ray diffraction analyses. In complexes 1-5, ligands L₂ and L₃ show different conformations and act as three-connectors, while the Ag(I) atom serves as three-connecting node to result in the formation of 2D and 3D frameworks. Complexes 1 and 2 with different counteranions have similar 2D network structure with the same (4,8²) topology. Complex 3 has a 3D structure with (10,3)-a topology while complexes 4 and 5 have the same 2D (6,3) topological structure. The results showed that the structure of organic ligands and counteranions play subtle but important role in determining the structure of the complexes. In addition, the photoluminescence and anion-exchange properties of the complexes were investigated in the solid state at room temperature.     

Two New Silver(I) Ammine Complexes by Displacement Reaction Between [Ag(NH3)2]+ Ions and Different Pyridine‐4,5‐Imidazoledicarboxylic Acids

[Ag(NH₃)₂]⁺ ions are chosen as an initial reaction precursor because of its simple displacement reaction and intrinsic arrangement as well as specific coordination directionality. Two new silver(I) ammine complexes, Ag₂(NH₃)HL² ( 2 ) and Ag₂(NH₃)₂HL³ ( 3 ), were obtained by a simple substitution reaction between [Ag(NH₃)₂]⁺ ions and pyridine‐4,5‐imidazoledicarboxylic acid [H₃L² = 2‐(3′‐pyridyl) 4,5‐imidazoledicarboxylic acid and H₃L³ = 2‐(4′‐pyridyl) 4,5‐imidazoledicarboxylic acid]. Silver dimers are connected into a 2D layer and 1D chain in complexes 2 and 3 , respectively. In complex 2 two kinds of displacement reactions (mono‐substituting and bis‐substituting) occurred between the ammine molecules in [Ag(NH₃)₂]⁺ ions and H₃L², however, only the mono‐substituting reaction occurs in complex 3 .     

Sensitivity Enhancement in Nickel Hydroxide/3D‐Graphene as Enzymeless Glucose Detection

A nickel hydroxide (Ni(OH)₂)/3D‐graphene composite is used as monolithic free‐standing electrode for enzymeless electrochemical detection of glucose. Ni(OH)₂ nanoflakes are synthesized by using a simple solution growth procedure on 3D‐graphene foam which was grown by chemical vapor deposition (CVD). The pore structure of 3D‐graphene allows easy access to glucose with high surface area, which leads to glucose detection with an ultrahigh sensitivity of 3.49 mA mM^?1 cm^?2 and a significant lower detection limit up to 24 nM. Cyclic voltammetry (CV) and potentionstatic mode is used for non‐enzymatic glucose sensing. The impedance and effective surface area have been studied well. The high sensitivity, low detection limit and simple configuration of Ni(OH)₂/three dimensional (3D)‐graphene composite electrodes can evoke its industrial application in glucose sensing devices.     

Synthese und Struktur von Ammin- und Amidokomplexen des Iridiums

Synthesis and Structure of Ammine and Amido Complexes of Iridium The reaction of (NH₄)₂[IrCl₆] with NH₄Cl at 300 °C in a sealed glass ampoule yields the iridium(III) ammine complex (NH₄)₂[Ir(NH₃)Cl₅], which crystallizes isotypically with K₂[Ir(NH₃)Cl₅] in the orthorhombic space group Pnma with Z = 4, and a = 1350.0(2); b = 1028.5(3); c = 689.6(2) pm. The reaction of (NH₄)₂[IrCl₆] with NH₃ at 300 °C, however, gives the already known [Ir(NH₃)₅Cl]Cl₂ beside a small amount of [Ir(NH₃)₄Cl₂]Cl₂. In pure form [Ir(NH₃)₅Cl]Cl₂ is obtained by ammonolysis of (NH₄)₂[Ir(NH₃)Cl₅] at 300 °C with NH₃. [Ir(NH₃)₄Cl₂]Cl₂ crystallizes triclinic (P1, Z = 1, a = 660,2(3); b = 680,4(3); c = 711,1(2) pm; α = 103,85(2)°, β = 114,54(3)°, γ = 112,75(2)°). The structure contains Cl^– anions and [Ir(NH₃)₄Cl₂]²⁺ cations with a trans position of the Cl atoms. Upon reaction of [Ir(NH₃)₅Cl]Cl₂ with Cl₂ one ammine ligand is eliminated yielding [Ir(NH₃)₄Cl₂]Cl, which is transformed to orthorhombic [Ir(NH₃)₄(OH₂)Cl]Cl₂ (Pnma, Z = 4, a = 1335,1(3); b = 1047,9(2); c = 673,4(2) pm) by crystallization from water. In the octahedral complex [Ir(NH₃)₄(OH₂)Cl]²⁺ the four ammine ligands have an equatorial position, whereas the Cl atom and the aqua ligand are arranged axial. Oxidation of (NH₄)₂[Ir(NH₃)Cl₅] with Cl₂ at 330 °C affords the tetragonal Ir^IV complex (NH₄)[Ir(NH₃)Cl₅] (P4nc, Z = 2, a = 702.68(5); c = 912.89(9) pm). Its structure was determined using the powder diagram. Oxidation of (NH₄)₂[Ir(NH₃)Cl₅] with Br₂ in water, on the other hand, gives (NH₄)₂[IrBr₆] crystallizing in the K₂[PtCl₆] type. Oxidation of (PPh₄)₂[Ir(NH₃)Cl₅] with PhI(OAc)₂ in CH₂Cl₂ affords the Ir^V amido complex (PPh₄)[Ir(NH₂)Cl₅].     

Nicotinamide complex of silver(III) with expanded coordination number

Abstract

In strongly alkaline media ([OH^?]?≥?0.12 M), nicotinamide (nica) forms a complex with square-planar Ag(OH)₄^? [nica]?≥?0.05 M. The complex decomposes in seconds to nicotinamide N-oxide. The correlation of maximum absorbance of the complex with concentrations of nicotinamide and hydroxide requires that the complex is either the five-coordinate Ag(OH)₄(H_-1nica)^2? or the six-coordinate Ag(OH)₅(nica)^2?. Comparison with the reactions of Ag(OH)₄^? with nicotinate ion (nic^?) and acetamide under similar conditions indicates that nicotinamide coordinates with Ag(OH)₄^? by the amido group rather than the nitrogen on the pyridine ring or the amido oxygen. Kinetics of the Ag(III)-nica redox reaction are consistent with direct reaction between nicotinamide and uncoordinated Ag(OH₄)^?. Oxidation takes place at the pyridine ring, yielding nicotinamide N-oxide. Silver(III) is reduced to monovalent silver.     

Hydrothermal syntheses,crystal structures and thermal stability of two divalent metal phosphonates with a layered and a 3D structure

Two new divalent metal phosphonates, [Cu₂{CH₃C(OH)(PO₃)₂}(H₂O)₂]?·?0.5H₂O (1) and [NH₃CH₂CH₂NH₃][Zn₃{CH₃C(OH)(PO₃)₂}₂(H₂O)]?·?H₂O (2), have been hydrothermally synthesized and characterized by single-crystal X-ray diffraction as well as with infrared spectroscopy, elemental analysis and thermogravimetric analysis. The structure of 1 comprises [Cu₃(hedp)₂]^2? layers connected by [CuO₄] units to form a 3D open-framework structure with a one-dimensional channel system along the b axis. In 2, the connections of alternately arranged [ZnO₄] tetrahedra, [ZnO₆] octahedra and [CPO₃] tetrahedra via vertex-sharing result in a 2D layered structure. The protonated ethylenediamine cations and water molecules are located between adjacent layers.     

Synthesis and Structural Characterization of One‐Dimensional Cadmium(II) Coordination Polymers Containing Polydentate Nitrogen Ligands

The reactions of Cd(NO₃)₂·4H₂O with NH₄SCN and 2,4‐dpa (2,4‐dpa = 2,4‐dipyridineamine) in CH₃OH afforded the one‐dimensional coordination polymer [Cd(NCS)₂(2,4‐dpa)₂]_n, 1 , while reaction of Cd(NO₃)₂·4H₂O with NH₄SCN and PmPa (PmPa = 2‐(1‐piperazinyl)pyrimidine) in CH₃OH gave complex of the type [Cd(NCS)₂(PmPa)₂]_n, 2. Each of the 2,4‐dpa ligand in complex 1 is coordinated to the Cd²⁺ metal center through pyridyl nitrogen atoms to form the one‐dimensional chain structures. The distorted {CdN4S2} octahedral coordination geometry around Cd²⁺ center is completed by pairs of bidentate thiocyanato ligands. Complex 2 has the 1‐D arrangement constructed through one‐dimensional double μ(N,S) end‐to‐end bridging thiocyanato groups bridged Cd(II) chains interconnected through PmPa ligands.     

Enhanced Specificity and Sensitivity for the Determination of Nickel(II) by Square-wave Adsorptive Cathodic Stripping Voltammetry at Disposable Graphene-modified Pencil Graphite Electrodes

Chemical sensors relying on graphene-based materials have been widely used for electrochemical determination of metal ions and have demonstrated excellent signal amplification. This study reports an electrochemically reduced graphene oxide (ERGO)/mercury film (HgF) nanocomposite-modified pencil graphite electrode (PGE) prepared through successive electrochemical reduction of graphene oxide (GO) sheets and an in situ plated HgF. The ERGO-PG-HgFE, in combination with dimethylglyoxime (DMG) and square-wave adsorptive cathodic stripping voltammetry (SW-AdCSV), was evaluated for the determination of Ni²⁺ in tap and natural river water samples. A single-step electrode pre-concentration approach was employed for the in situ Hg-film electroplating, metal-chelate complex formation, and non-electrolytic adsorption at –0.7 V. The current response due to nickel-dimethylglyoxime [Ni(II)-DMG₂] complex reduction was studied as a function of experimental paratmeters including the accumulation potential, accumulation time, rotation speed, frequency and amplitude, and carefully optimized for the determination of Ni²⁺ at low concentration levels (μg?L^?1) in pH 9.4 of 0.1 M NH₃–NH₄Cl buffer. The reduction peak currents were linear with the Ni²⁺ concentration between 2 and 16?μg?L^?1. The limits of detection and quantitation were 0.120?±?0.002?µg?L^?1 and 0.401?±?0.007?µg?L^?1 respectively, for the determination of Ni²⁺ at an accumulation time of 120?s. The ERGO-PG-HgFE further demonstrated a highly selective stripping response toward Ni²⁺ determination compared to Co²⁺. The electrode was found to be sufficiently sensitive to determine metal ions in water samples at 0.1?µg?L^?1, well below the World Health Organization standards.     

Studies on the Chemistry of [Cd(NH3)4](MnO4)2. A Low Temperature Synthesis Route of the CdMn2O4+x Type NOx and CH3SH Sensor Precursors

Abstract. [Tetraamminecadmium(II)] bis(permanganate) ( 1 ) was prepared and its crystal structure was elucidated with XRD‐Rietveld refinement and vibrational spectroscopic methods. Compound 1 has a cubic lattice consisting of a 3D hydrogen‐bonded network built as four by four distorted tetrahedral blocks of [Cd(NH₃)₄]²⁺ cations and MnO₄^– anions, respectively. The other four permanganate ions are located in a crystallographically different environment, placed in the cavities formed by the attachment of the building blocks. A low‐temperature (≈100 °C) solid phase quasi‐intramolecular redox reaction producing ammonium nitrate and amorphous CdMn₂O₄ could be established. Neither solid phase nor aqueous solution phase thermal deammoniation of compound 1 can be used to prepare Cd(MnO₄)₂ and [Cd(NH₃)₂(MnO₄)₂]. During deammoniation of compound 1 in aqueous solution a precipitate consisting of Cd(OH)₂ forms. Additionally, solid MnO₂ and ammonium permanganate (NH₄MnO₄) forms. The solid phase deammoniation reaction (toluene used as heat convecting medium) with subsequent aqueous leaching of the ammonium nitrate formed has proved to be an easy and convenient technique for the synthesis of amorphous CdMn₂O_4+x type NO_x and MeSH sensor precursors. The 1 ‐ D perdeuterated complex was also synthesized to distinguish the N–H(D) and O–H(D) fragment signals in the TG‐MS spectra and to elucidate the vibrational characteristics of the overlapping Mn–O and Cd–N frequencies.     

Green synthesis of silver nanoparticles using Eucalyptus comadulensis leaves extract and its immobilization on magnetic nanocomposite (GO-Fe3O4/PAA/Ag) as a recoverable catalyst for degradation of organic dyes in water

The magnetically recyclable graphene oxide-Fe₃O₄/polyallylamine (PAA)/Ag nanocatalyst was prepared via a green route using Eucalyptus comadulensis leaves extract as both reducing and stabilizing agent. The catalytic activity of this nanocatalyst was investigated for the reduction reaction of methylene blue and methyl orange in the presence of NaBH₄ in aqueous medium at room temperature. The prepared nanocatalyst was characterized by different methods such as Fourier transformed infrared spectroscopy, X-ray diffraction, scanning electron microscopy–energy dispersive X–ray spectroscopy, thermogravimetric analysis, vibrating sample magnetometer, transmission electron microscopy, and UV–visible spectroscopy. The results show that graphene oxide/PAA/Ag nanocatalyst has good activity and recyclability, and can be reused several times without major loss of activity in the reduction process. The apparent rate constants of the methyl orange (MO) and methylene blue (MB) were calculated to be 0.077 s⁻¹ (3 mg of catalyst) and 0.15 s⁻¹ (2 mg of catalyst), respectively.     

可控纳米银胶体的稳定性研究

纳米银胶体(AgNPs)长期储存不稳定性问题是本研究的中心,着重考察了不同前驱体对纳米银胶体的稳定性影响.分别以银氨([Ag(NH₃)₂]OH)溶液和AgNO₃溶液为前驱体制备了多份纳米银胶体样品并通过UV-Vis、FE-SEM、EDS、ZETA电位仪等现代分析测试手段研究了纳米银胶的形貌、粒径大小以及稳定性.对比分析发现,以[Ag(NH₃)₂]OH溶液为前驱体,制备的纳米银胶体具有粒径可控,尺寸均一,分散性良好等特点;而且经过一个月的常温储存,表现出比用AgNO₃溶液为前驱体制备的纳米银胶体具有更高的储存稳定性.     

可控纳米银胶体的稳定性

纳米银胶体(AgNPs)长期储存不稳定性问题是本研究的中心,着重考察了不同前驱体对纳米银胶体的稳定性影响。分别以银氨([Ag(NH3)2]OH)溶液和Ag NO3溶液为前驱体制备了多份纳米银胶体样品并通过UV-Vis、FE-SEM、EDS、ZETA电位仪等现代分析测试手段研究了纳米银胶的形貌、粒径大小以及稳定性。对比分析发现,以[Ag(NH3)2]OH溶液为前驱体,制备的纳米银胶体具有粒径可控,尺寸均一,分散性良好等特点;而且经过一个月的常温储存,表现出比用Ag NO3溶液为前驱体制备的纳米银胶体具有更高的储存稳定性。     

Synthesis,Characterization, and Crystal Structures of Cu,Ag, and Pd Dinitramide Salts

The literature known, but not fully characterized, silver dinitramide transfer reagents AgN(NO₂)₂ ( 1 ), [Ag(NCCH₃)][N(NO₂)₂] ( 2 ), and [Ag(py)₂][N(NO₂)₂] ( 3 ) have been investigated by ¹⁰⁹Ag, ¹⁴N NMR and vibrational spectroscopy (IR, Raman). In addition, the poorly understood [Cu(NH₃)₄][N(NO₂)₂)]₂ ( 4 ) and [Pd(NH₃)₄][N(NO₂)₂]₂, ( 5 ) have also been prepared and characterized by ¹⁴N NMR and vibrational spectroscopy (IR, Raman). The structures of 2 — 5 have also been determined by X‐ray diffraction.     

Immobilization of In2O3 nanoparticles on the surface of reduced graphene oxide

This communication describes a new method for immobilizing indium oxide nanoparticles (∼20 nm) on the surface of reduced graphene oxide. Dispersion of graphene oxide with added In₂O₃ nanoparticles was treated in supercritical isopropanol, both a reducing agent of graphene oxide and a reaction medium. The resulting nanocomposite was characterized by different methods of physical and chemical analysis.     

Reactions of Beryllium Halides in Liquid Ammonia: The Tetraammineberyllium Cation [Be(NH3)4]2+, its Hydrolysis Products,and the Action of Be2+ as a Fluoride‐Ion Acceptor

The first structural characterization of the text‐book tetraammineberyllium(II) cation [Be(NH₃)₄]²⁺, obtained in the compounds [Be(NH₃)₄]₂Cl₄ ? 17NH₃ and [Be(NH₃)₄]Cl₂, is reported. Through NMR spectroscopic and quantum chemical studies, its hydrolysis products in liquid ammonia were identified. These are the dinuclear [Be₂(μ‐OH)(NH₃)₆]³⁺ and the cyclic [Be₂(μ‐OH)₂(NH₃)₄]²⁺ and [Be₃(μ‐OH)₃(NH₃)₆]³⁺ cations. The latter species was isolated as the compound [Be₃(μ‐OH)₃(NH₃)₆]Cl₃ ? 7NH₃. NMR analysis of solutions of BeF₂ in liquid ammonia showed that the [BeF₂(NH₃)₂] molecule was the only dissolved species. It acts as a strong fluoride‐ion acceptor and forms the [BeF₃(NH₃)]^? anion in the compound [N₂H₇][BeF₃(NH₃)]. The compounds presented herein were characterized by single‐crystal X‐ray structure analysis, ⁹Be, ¹⁷O, and ¹⁹F NMR, IR, and Raman spectroscopy, deuteration studies, and quantum chemical calculations. The extension of beryllium chemistry to the ammine system shows similarities but also decisive differences to the aquo system.     

L'action de l'ammoniac sur l'hydroxyde de cobalt(II) et la stabilité des complexes en milieu aqueux

From the solubility of precipitated Co(OH)₂ (s) determined radiometrically as a function of pH and ammonia content of the heterogeneous systems, the formation constants have been obtained for the following mononuclear hydroxo-, ammine- and mixed hydroxo-ammine-complexes: Co(OH)₂, Co(OH)₃^?, Co(NH₃)₂²⁺, Co(NH₃)₃²⁺, Co(NH₃)₄²⁺ and Co(OH)₂ (NH₃)₂. The solubility of cobalt(II) hydroxide has also been calculated. The medium was 1M NaClO₄ and the temperature 25° C.