高性能析氧电催化剂的设计策略

电催化水分解反应是可以实现规模化制取氢气的一种重要绿色无污染的手段,但是其效率极大地受制于阳极析氧反应. 因此,发展廉价、高效的析氧反应催化剂是当下的研究热点. 通过分析决定析氧反应催化活性的因素,本综述总结了低成本、高效、稳定的析氧电催化剂的一些通用设计与制备策略,包括：1）通过电子结构调控、结晶度调控、相调控、缺陷位调控以及自旋态调控提升单个催化活性位点的本征催化活性;2）设计与构筑先进电极结构,以实现活性位点数量最大化,获得大电流下稳定的电极材料. 进而,选取了一些具有代表性的高效析氧催化剂作为例子来阐述这些策略的实用性. 最后,对高效、可在大电流密度下稳定工作的析氧催化剂的理性设计、可控制备和发展方向提出了展望,以期为新型高性能析氧催化剂的设计提供指导.     

Promotion of the oxygen evolution performance of Ni–Fe layered hydroxides via the introduction of a proton-transfer mediator anion

Developing efficient catalysts with high durability and activity for the oxygen evolution reaction(OER)is imperative for sustainable energy conversion technologies,including hydrogen generation and CO₂ reduction,as well as other electrochemical energy storage systems.To this end,a comprehensive understanding of the mechanism for the water oxidation reaction is vital.Herein,a surfactant,nonafluoro-1-butanesulfonate(FBS),was introduced into Ni-Fe layered double hydroxide(Ni Fe-FBS/CFP)via electrochemical deposition on the surface of a carbon fiber paper(CFP)substrate.The as-prepared Ni Fe-FBS/CFP electrode exhibited excellent catalytic activities for OER compared to the Ni-Fe layered double hydroxide based electrode(Ni Fe-LDH/CFP),an excellent stability of 15 h,and an ultralow Tafel slope of 25.8 m V dec-1.Furthermore,by combining the results of p H-dependent kinetics investigations,chemical probing,proton inventory studies,and isotopic and atom-protontransfer measurements,it was observed that a proton-transfer process controls the reaction rates of both the Ni Fe-LDH and Ni Fe-FBS catalysts,and the residual sulfonate groups serve as proton transfer mediator to accelerate the proton transfer rate.     

Introducing Fe2+ into Nickel–Iron Layered Double Hydroxide: Local Structure Modulated Water Oxidation Activity

Exploring materials with regulated local structures and understanding how the atomic motifs govern the reactivity and durability of catalysts are a critical challenge for designing advanced catalysts. Herein we report the tuning of the local atomic structure of nickel–iron layered double hydroxides (NiFe‐LDHs) by partially substituting Ni²⁺ with Fe²⁺ to introduce Fe‐O‐Fe moieties. These Fe²⁺‐containing NiFe‐LDHs exhibit enhanced oxygen evolution reaction (OER) activity with an ultralow overpotential of 195 mV at the current density of 10 mA cm^?2, which is among the best OER catalytic performance to date. In‐situ X‐ray absorption, Raman, and electrochemical analysis jointly reveal that the Fe‐O‐Fe motifs could stabilize high‐valent metal sites at low overpotentials, thereby enhancing the OER activity. These results reveal the importance of tuning the local atomic structure for designing high efficiency electrocatalysts.     

Enlightening the journey of metal-organic framework (derived) catalysts during the oxygen evolution reaction in alkaline media via operando X-ray absorption spectroscopy

The development of catalysts with enhanced activity for the oxygen evolution reaction (OER) compared to the traditionally used metal oxide catalysts is crucial for further commercialization of electrolyzers. Because of their high surface area and adjustable pore structure, metal-organic framework (MOF)-based catalysts represent a promising alternative. During the OER in alkaline media, the initial MOF structure is susceptible to transformations including the decomposition of the organic backbone and/or the formation of oxide, hydroxide and oxyhydroxide intermediates. Hence, operando characterizations of MOF catalysts during OER are essential to understand the material's progressive changes and extract the OER catalytic mechanism. This article discusses existing operando X-ray absorption spectroscopy studies of MOF(-derived) catalysts during OER and extracts important parameters for future research regarding operando X-ray absorption spectroscopy characterizations of MOFs during alkaline electrolysis.     

A novel ball-in-ball hollow oxygen-incorporating cobalt sulfide spheres as high-efficient electrocatalyst for oxygen evolution reaction

Transition-metal chalcogenides with hollow nanostructure,especially cobalt sulfides,are considered as the most pro mising non-precious metal catalysts for oxygen evolution reactio n.However,it is difficult to synthesize oxygen-containing cobalt sulphides with hollow structure due to the different physical/chemical properties between metal sulfides and metal cobalts.Herein,we report a novel oxygencontaining amorphous cobalt sulfide ball-in-ball hollow sphere s(Co-S-O BBHS) synthesized by an anion exchange method.Taking advantage of the ball-in-ball hollow structure,the amorphous Co-S-O BBHS shows supe rior oxygen evolution reaction(OER) electrocatalytic performance with a low overpotentiat of285 mV at 10 mA/cm~2,small Tafel slope of 49.67 mV/dec,high Faraday efficiency of 96%,and satisfied durability.Experiments and DFT calculations demonstrate that the introduction of oxygen and sulfur modulates the electronic structure of Co-S-O BBHS,thus enhancing the adsorption of *0(adsorbed 0 species on catalyst surface) intermediate,which greatly boosts the catalytic activity towards OER.This work provides a new strategy for controllable synthe sis of complex hollow structures of transition-metal chalcogenides for OER.     

利用MOF-253衍生氮掺杂碳限域效应促进Pt纳米单晶电催化剂的氧析出反应

目前,为了有效解决电化学能量转化反应动力学过程缓慢和商业化应用等问题,需要大力提高催化剂的电催化活性和稳定性,并大幅降低贵金属催化剂的用量.通常,铂(Pt)基催化剂对燃料电池的氧还原反应(ORR)和水电解过程的氢析出反应(HER)表现出很高的活性.然而,对于高效的金属-空气电池和水电解装置,其中的氧析出反应(OER)则需要高活性的非Pt电催化剂来降低电化学过电位及提高其对高电位的耐受性.虽然相较于Pt催化剂,IrO2和RuO2等贵金属催化剂表现出了更高的OER活性,然而,它们的稳定性差,难以满足实际应用需求,严重阻碍了其在金属-空气电池和水电解中的应用.通常,Pt对OER的低效催化主要归因于在OER电催化过程中Pt与电解液直接接触,导致Pt表面快速被氧化,形成Pt氧化物(Pt^+4O2和Pt^+2O)层.形成的Pt氧化物对OER不起催化作用,从而降低了Pt的利用率和总的水电解效率.为了避免Pt表面的快速氧化,实现高的OER性能,我们将Pt金属纳米粒子有效地限域在超薄功能多孔碳层内.前期,已有大量的有关金属基ORR和HER催化剂研究证明,这种策略对于稳定金属纳米颗粒非常有效,可有效避免金属催化剂的快速氧化,而且还可抑制金属颗粒迁移和团聚;此外,还有利于增强催化剂的导电性和离子物种的扩散能力,从而提高催化剂的电催化性能.然而,要达到提高金属催化剂OER电催化性能的目的,还需要设计一种具有优良结构的功能化异质原子掺杂多孔碳基限域材料.金属有机框架(MOF),特别是MOF-253,由于具有较高的柔韧性、丰富的孔、可控的几何结构和高比表面积,被认为是制备功能多孔碳基限域材料的理想前驱体.为此,通过结合功能多孔碳基材料的限域作用及MOF-253和超细Pt纳米单晶的优势,本文合成了MOF-253衍生氮掺杂碳(N/C)限域的Pt纳米单晶(Pt@N/C)核壳型电催化剂.制备的Pt-N-C框架不仅具有超薄的氮掺杂活性多孔碳保护层壳体(平均厚度为0.51 nm),还有具高度分散和稳定化的Pt纳米单晶核体;值得指出的是,因受到碳层的限域作用,即使经900℃的高温处理,Pt纳米单晶仍保持了较小的晶体尺寸(平均粒径仅为6.7 nm);此外,该催化剂的Pt载量较低,仅为6.1wt%(Pt@N/C-10).将其作为OER电催化剂,表现出优异的OER性能:在10 mA cm^-2电流密度下,其过电位仅为298 mV,低于商业IrO2催化剂(353 mV);而且,经2000周加速电位扫描后,其电位仅降低19.4 mV,也低于IrO2(23.3 mV).本文很好地证明了通过构建空间限域结构可以有效解决Pt等金属催化剂因表面氧化而导致OER动力学活性和稳定性低的问题.     

酸性电解水过程中氧析出反应的机理及铱基催化剂的研究进展北大核心CSCD

可持续能源的迅速发展,使绿色清洁的氢能源成为热点。质子交换膜(PEM)水电解是一项很有前途的技术,可高效生产高纯度氢气。IrO_(2)作为质子交换膜(PEM)水电解槽阳极氧析出反应(OER)的商用电催化剂,既能在强酸性、高强度腐蚀条件下保持稳定,又表现出优异的催化性能。然而,由于Ir的稀缺性和昂贵的价格,提高Ir基催化剂的OER活性,开发低Ir催化剂就显得至关重要。对其反应机理的认知是当前的研究热点之一,也是设计优异的OER催化剂的关键所在。因此,首先从OER机理出发,对目前被广泛认可的吸附物逸出机理(AEM)和晶格氧逸出机理(LOER)两种反应机理进行了研究。随后,根据所提出的这两种机理,介绍了OER催化剂设计的基本准则,即调控Ir基催化剂的电子结构,改善反应中间物种在催化活性位点上的吸附能,从而提高OER催化活性。并从催化剂的结构设计、形貌控制、载体材料3个方面简单概述了最近OER催化剂的研究进展。最后,在已有研究的基础上,提出了目前OER催化剂面临的困难与挑战,这为以后相关的研究指明了方向。     

泡沫镍铁合金自支撑NiFeOOH纳米片的制备及析氧性能研究

电催化析氧反应(OER)是电解水制氢的重要半电池反应。然而,OER的缓慢动力学仍需研究高效的电催化剂。在非贵金属催化剂中,NiFe基材料是OER催化剂研究热点。本文通过食人鱼溶液简单一步浸渍刻蚀法将不同Fe含量的泡沫NiFe合金进行氧化,制备了表面具有纳米片形貌的NiFeOOH自支撑电催化剂,并深入研究其电催化析氧性能。通过SEM、XRD、XPS等对电催化剂的形貌结构及成分进行表征,证实了三维多孔基底上NiFeOOH纳米片结构的形成。由于高价镍、铁物种的存在以及二维纳米片结构的生成,NiFeOOH/NF的析氧性能大幅度提高,在10 mA?cm-2的电流密度下过电位仅155.68 mV,Tafel斜率为 88.2 mV?dec-1。这为研制高效、耐用的自支撑非贵金属电极提供了新思路。     

Substituent position effect of Co porphyrin on oxygen electrocatalysis

Substituent effect of metal porphyrin molecular catalysts plays a crucial role in determining the catalytic activity of oxygen electrocatalysis. Herein, substituent position effect of Co porphyrins on oxygen electrocatalysis, including the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER), was investigated. Two Co porphyrins, namely 2,4,6-OMe-CoP and 3,4,5-OMe-CoP, were selected as the research objects. The ORR and OER performance was evaluated by drop-coating molecular catalysts on carbon nanotubes (CNTs). The resulted 3,4,5-OMe-CoP/CNT exhibited high bifunctional electrocatalytic activities and better long-term stability for both ORR and OER than 2,4,6-OMe-CoP/CNT. Furthermore, when applied in the Zn-air battery, 3,4,5-OMe-CoP/CNT exhibited comparable performance to that with precious metal-based materials. The enhanced catalytic activity may be attributed to the improved charge transfer rate, mass transfer and hydrophilicity. This work provides an effective strategy to further enhance catalytic activity by introducing substituent position effect, which is of great importance for developing more efficient energy-related electrocatalysts.     

Oxygen Electroreduction Catalysts Based on Polymer Complexes of Nickel with Schiff Bases

In energy-storage systems such as fuel cells and metal-air batteries, the main current-forming process is the reaction of oxygen electroreduction (OER). A simple method is proposed for synthesizing OER catalysts based on polymer complexes of transition metals (nickel, palladium) with Schiff bases prepared by electrochemical polymerization of starting monomers. The OER catalysts are prepared by thermolysis of polymers in inert atmosphere. Their properties are characterized by the methods of cyclic voltammetry with the use of a rotating disk electrode. The surface state (the catalyst film density, the size and composition of particles) is controlled by scanning electron microscopy with X-ray microanalysis. The electrode demonstrates the high catalytic activity in the oxygen electroreduction reaction in alkaline solutions (higher than 750 mA/mg of the initial polymer mass).     

Copper-based metal–organic framework decorated by CuO hair-like nanostructures: Electrocatalyst for oxygen evolution reaction

We report a Cu-based metal–organic framework (MOF) decorated by CuO nanostructures as an efficient catalyst for the oxygen evolution reaction (OER). MIL-53(Cu) was synthesized by a hydrothermal approach using 1,4-bezenedicarboxylic acid as organic precursor and further annealed at 300°C to form CuO nanostructures on its surface. The produced electrocatalyst, CuO@MIL-53(Cu), was characterized using various techniques. Under alkaline conditions, the developed electrocatalyst exhibited an overpotential of 801 and 336 mV versus RHE at 10 and 1 mA cm⁻², respectively. The reproducibility of the catalytic performance was validated using several electrodes. It was confirmed that the CuO hair-like nanostructures grown on MIL-53(Cu) using thermal treatment exhibit high OER activity, good kinetics and durability. CuO@MIL-53(Cu) is an economic noble-metal-free OER electrocatalyst. It has potential for application as anode material for sustainable energy technologies like batteries, fuel cells and water electrolysis.     

低结晶度AuPt-Ru/CNTs合金异质结作为高效多功能电催化剂

催化剂的活性与其结构紧密相关,研究催化剂的构效关系以及可控合成高效电催化剂, 并探究其催化机制, 一直是科学研究的核心。贵金属铂是优异的电解水析氢的催化剂, 同时也是直接醇燃料电池阳极氧化的良好催化剂,而贵金属钌是优异的电解水析氧催化剂。这些与燃料电池及氢能相关的重要反应催化剂,可通过合成Pt、Au及Ru的合金催化剂, 通过应力效应、电子效应及团簇效应, 可有效提高金属催化剂的活性, 并实现多功能电催化性能。本文报道了可控合成低结晶度的AuPt-Ru合金异质结,并通过元素扫描分析及X射线衍射分析确认其结构。该催化剂表现出了非常优异的电催化氧化乙醇活性, 其归一化到Pt的质量活性达到了为21.4 A·mg^-1_Pt, 远远高于对照组样品AuPt及RuAuPt混合相催化剂及文献报道样品。催化剂同样表现出了非常好的乙醇氧化稳定性, 但是其活性的衰减与其Ru组分的流失紧密相关。我们同时通过电化学原位红外光谱,研究了该催化剂乙醇氧化中间产物, 分析了其反应机理。该催化剂同样表现出了优异的碱性电解水析氢及析氧催化活性,其析氢电流10 mA·cm^-2对应的过电位为30 mV, Tafel斜率为45 mV·dec^-1, 优于AuPt及RuPtAu对照组样品。该催化剂优异的电化学性能主要归结于其低结晶度和异质结及其伴随的应力效应及团簇效应。本报道提供了一种可控合成具有异质结结构的金属合金催化剂, 突出了其对实现多功能、 高性能合金电催化剂的重要性。     

Scaled‐Up Synthesis of Amorphous NiFeMo Oxides and Their Rapid Surface Reconstruction for Superior Oxygen Evolution Catalysis

The anode oxygen evolution reaction (OER) is known to largely limit the efficiency of electrolyzers owing to its sluggish kinetics. While crystalline metal oxides are promising as OER catalysts, their amorphous phases also show high activities. Efforts to produce amorphous metal oxides have progressed slowly, and how an amorphous structure benefits the catalytic performances remains elusive. Now the first scalable synthesis of amorphous NiFeMo oxide (up to 515 g in one batch) is presented with homogeneous elemental distribution via a facile supersaturated co‐precipitation method. In contrast to its crystalline counterpart, amorphous NiFeMo oxide undergoes a faster surface self‐reconstruction process during OER, forming a metal oxy(hydroxide) active layer with rich oxygen vacancies, leading to superior OER activity (280 mV overpotential at 10 mA cm^?2 in 0.1 m KOH). This opens up the potential of fast, facile, and scale‐up production of amorphous metal oxides for high‐performance OER catalysts.     

Double Perovskite LaFexNi1−xO3 Nanorods Enable Efficient Oxygen Evolution Electrocatalysis

Perovskite‐based electrocatalysts are one of the most promising materials for oxygen evolution reaction (OER), but their activity and durability are still far from desirable. Herein, we demonstrate that the double perovskite LaFe_xNi_1?xO₃ (LFNO) nanorods (NRs) can be adopted as highly active and stable OER electrocatalysts. The optimized LFNO‐II NRs with Ni/Fe ratio of 8:2 achieve a low overpotential of 302 mV at 10 mA cm^?2 and a small Tafel slope of 50 mV dec^?1, outperforming those of the commercial Ir/C. The LFNO‐II NRs also show high OER stability with slight current decrease after 20 h. The enhanced activity is explained by the improved surface area, tailored electronic structure as well as strong hybridization between O and Ni.     

A Universal and Facile Way for the Development of Superior Bifunctional Electrocatalysts for Oxygen Reduction and Evolution Reactions Utilizing the Synergistic Effect

Increasing energy demands have stimulated intense research activities on reversible electrochemical conversion and storage systems with high efficiency, low cost, and environmental benignity. It is highly challenging but desirable to develop efficient bifunctional catalysts for both the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). A universal and facile method for the development of bifunctional electrocatalysts with outstanding electrocatalytic activity for both the ORR and OER in alkaline medium is reported. A mixture of Pt/C catalyst with superior ORR activity and a perovskite oxide based catalyst with outstanding OER activity was employed in appropriate ratios, and prepared by simple ultrasonic mixing. Nanosized platinum particles with a wide range of platinum to oxide mass ratios was realized easily in this way. The as‐formed Pt/C–oxide composites showed better ORR activity than a single Pt/C catalyst and better OER activity than a single oxide to bring about much improved bifunctionality (ΔE is only ≈0.8 V for Pt/C–BSCF; BSCF=Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3?δ), due to the synergistic effect. The electronic transfer mechanism and the rate‐determining step and spillover mechanism were two possible origins of such a synergistic effect. Additionally, the phenomenon was found to be universal, although the best performance could be reached at different platinum to oxide mass ratios for different oxide catalysts. This work thus provides an innovative strategy for the development of new bifunctional electrocatalysts with wide application potentials in high‐energy and efficient electrochemical energy storage and conversion.     

低铱酸性氧析出电催化剂的研究进展

开发高性能、 低成本的氧析出反应（OER）电催化剂是促进质子交换膜水电解（PEMWE）制氢规模化应用的关键。迄今为止, OER催化剂的最佳选项仍为贵金属铱(Ir), 但其仍存在活性不足和储量稀缺的问题, 进而增加了材料成本和电力成本。因此, 开发低Ir载量、 高活性和稳定性间距, 且能够满足PEMWE设备中大电流密度和长期运行要求的OER催化剂是十分必要的。这些目标的实现需要深入理解酸性OER机制、明晰材料设计方法, 并建立可靠的性能评估指标（特别是对耐久性的评估）。综上,本文首先系统总结了目前被广泛接受的酸性OER活性表达机制（即吸附析出机制、 晶格氧氧化机制和多活性中心机制）和失活机制（即活性物种溶解、晶相和形态演化、 催化剂脱落和活性位点阻塞）, 为催化剂的微观结构设计提供指导。其次, 我们讨论了最近报道的几类低铱OER催化剂, 包括多金属合金氧化物、 负载型催化剂、具有特殊空间结构的催化剂和单位点催化剂, 并重点描述低Ir催化剂中的性能如何得以调控以及其中潜在的构效关系。随后, 我们介绍了常用的催化剂稳定性评价指标、 催化剂失活表征技术以及模拟PEMWE实际操作条件的催化剂寿命测试方法,希望为催化剂筛选提供依据。最后, 针对未来可用于PEMWE体系的低铱OER催化剂的探索提出了一些可行建议。     

Pt单层修饰Pd/C氧还原催化剂

分别利用液相热解法和浸渍还原法制备了碳载钯纳米催化剂（Pd/C）,并研究了其对氧还原反应的电催化活性。与浸渍还原法相比,液相热解法得到的Pd/C催化剂虽然粒径较大,但表现出较好的氧还原反应（ORR）活性和稳定性.在所制备的Pd/C催化剂基础上,通过置换欠电势沉积的Cu原子单层,获得了Pt单层修饰的Pd/C催化剂,其ORR活性较Pd/C催化剂有显著提高,且与纯Pt/C催化剂接近,而其耐久性则较纯Pt/C催化剂有显著提升,显示出Pt单层催化剂的潜在优势.     

A general bimetal-ion adsorption strategy to prepare nickel single atom catalysts anchored on graphene for efficient oxygen evolution reaction

Single-atom catalysts (SACs) supported on two-dimensional (2D) materials are highly attractive for maximizing their catalytic activity.However,graphene based SACs are primarily bonded with nitrogen and carbon sites,resulting in poor performance for the oxygen evolution reaction (OER).Herein,we develop a general bimetal-ion adsorption strategy for the synthesis of individually dispersed Ni SACs anchored on the oxygenated sites of ultrathin reduced graphene oxide as efficient OER electrocatalysts.The resultant Ni SACs for OER in alkaline electrolyte exhibit a highly stable overpotential of 328 mV at the current density of 10 mA cm~(-2),and Tafel slope of 84 mV dec~(-1) together with long-term durability and negligible degradation for 50 h,which is greatly outperform its counterparts of nitrogen bonded Ni SACs (564 mV,364 mV dec~(-1)) and Ni(OH)_2 nanoparticles anchored on graphene (450 mV,142 mV dec~(-1)),and most reported Ni based OER electrocatalysts.Furthermore,the extended X-ray absorption fine structure at the Ni K-edge and theoretical simulation reveal that the nickel-oxygen coordination significantly boost OER performance.Therefore,this work will open numerous opportunities for creating novel-type 2D SACs via oxygen-metal bonding as highly robust OER catalysts.     

Structural feature and catalytic performance of Cu species distributed over TiO2 nanotubes

Copper oxide was deposited on tubular TiO2 via Cu2+ introduction into a titanate nanotube aggregate followed by calcination. The titanate has a layered structure allowing Cu intercalation and can readily transform into anatase TiO2 via calcination for condensation of the constituting layers. The activity of the tubular catalysts, with a Cu content of 2 wt %, in selective NO reduction with NH3 was compared with those of other 2 wt % Cu/TiO2 catalysts using TiO2 nanoparticles as the support. The Cu species supported on the nanotubes showed a higher activity than those supported on the nanoparticles. X-ray absorption near-edge structure (XANES) analysis showed that the Cu species on all the TiO2 supports are in the +2 state. Extended X-ray absorption fine structure (EXAFS) investigations of these catalysts reflected higher degrees of CuO dispersion and Cu2+ dissolution into the TiO2 lattice for the tubular Cu/TiO2 catalysts. Absence of CuO bulk detection by a temperature-programmed reduction analysis for the tubular catalysts confirmed the high CuO-dispersion feature of the tubular catalysts. The dissolution of Cu2+ to form a CuxTi1-xO2 type of solid solution was improved by using an in-situ ion-intercalation method for Cu deposition on the nanotubes. A fraction as high as 40% for Cu2+ dissolution was obtained for the tubular catalysts while only 20% was obtained for the particulate catalysts. The CuxTi1-xO2 species were considered one form of the active sites on the Cu/TiO2 catalysts.