Second Comes First: Switching Elementary Steps in Palladium-Catalyzed Cross-Coupling Reactions

The electron-poor palladium(0) complex L₃Pd (L=tris[3,5-bis(trifluoromethyl)phenyl]phosphine) reacts with Grignard reagents RMgX and organolithium compounds RLi via transmetalation to furnish the anionic organopalladates [L₂PdR]⁻, as shown by negative-ion mode electrospray-ionization mass spectrometry. These palladates undergo oxidative additions of organyl halides R′X (or related S_N2-type reactions) followed by further transmetalation. Gas-phase fragmentation of the resulting heteroleptic palladate(II) complexes results in the reductive elimination of the cross-coupling products RR′. This reaction sequence corresponds to a catalytic cycle, in which the order of the elementary steps of transmetalation and oxidative addition is switched relative to that of palladium-catalyzed cross-coupling reactions proceeding via neutral intermediates. An attractive feature of the palladate-based catalytic system is its ability to mediate challenging alkyl–alkyl coupling reactions. However, the poor stability of the phosphine ligand L against decomposition reactions has so far prevented its successful use in practical applications.     

Theoretical Study on the Mechanism of Sonogashira Coupling Reaction

The mechanism of palladium-catalyzed Sonogashira cross-coupling reaction has been studied theoretically by DFT （density functional theory） calculations. The model system studied consists of Pd（PH3）2 as the starting catalyst complex, phenyl bromide as the substrate and acetylene as the terminal alkyne, without regarding to the co-catalyst and base. Mechanistically and energetically plausible catalytic cycles for the cross-coupling have been identified. The DFT analysis shows that the catalytic cycle occurs in three stages： oxidative addition of phenyl bromide to the palladium center, alkynylation of palladium（Ⅱ） intermediate, and reductive elimination to phenylacetylene. In the oxidative addition, the neutral and anionic pathways have been investigated, which could both give rise to cis-configured palladium（Ⅱ） diphosphine intermediate. Starting from the palladium（Ⅱ） diphosphine intermediate, the only identifiable pathway in alkynylation involves the dissociation of Br group and the formation of square-planar palladium（Ⅱ） intermediate, in which the phenyl and alkynyl groups are oriented cis to each other. Due to the close proximity of phenyl and alkynyl groups, the reductive elimination of phenylacetylene proceeds smoothly.     

Dimethylaminoalkyl chalcogenolate palladium(II) complexes as an efficient copper- and phosphine-free catalyst for Sonogashira reaction

N,N-Dimethylaminoalkyl chalcogenolate Pd(II) complexes [PdCl(E^∩NMe₂)]_n has been investigated as a moisture/air-stable and robust catalyst for Sonogashira cross-coupling reaction in the absence of copper and phosphine ligand. The dimeric palladium(II) complex of selenium containing ligand shows the best catalytic activity as compared with monomeric and trimeric complexes. The variety of functional groups are tolerated under optimized catalytic systems and provide excellent yields of the products.     

Density functional studies on palladium-catalyzed Suzuki-Miyaura cross-coupling reactions assisted by N- or P-chelating ligands

DFT studies with the B3LYP functional have been carried out on the Suzuki-Miyaura cross-coupling reactions of phenyl chloride and phenylboronic acid catalyzed by palladium complexes with N- or P-chelating ligands. The full catalytic cycle, from the addition of reactants to the catalyst to the release of the cross-coupled product from the complexed intermediate, has been examined. The stages within the cycle, such as oxidative addition, transmetalation, and reductive elimination, were validated by linking the mechanistically relevant intermediates and transition states. Various derivatives of diimine, diphosphine, and diamine were considered as potential model ligands. The catalytic reaction employing diimine as the chelating ligand has been verified as the one with the most energetically feasible route.     

Stability and Unimolecular Reactivity of Palladate(II) Complexes [LnPdR3]− (L=Phosphine,R=Organyl,n=0 and 1)

The reduction of Pd^II precatalysts to catalytically active Pd⁰ species is a key step in many palladium‐mediated cross‐coupling reactions. Besides phosphines, the stoichiometrically used organometallic reagents can afford this reduction, but do so in a poorly understood way. To elucidate the mechanism of this reaction, we have treated solutions of Pd(OAc)₂ and a phosphine ligand L in tetrahydrofuran with RMgCl (R=Ph, Bn, Bu) as well as other organometallic reagents. Analysis of these model systems by electrospray‐ ionization mass spectrometry found palladate(II) complexes [L_nPdR₃]^? (n=0 and 1), thus pointing to the occurrence of transmetallation reactions. Upon gas‐phase fragmentation, the [L_nPdR₃]^? anions preferentially underwent a reductive elimination to yield Pd⁰ species. The sequence of the transmetallation and reductive elimination, thus, constitutes a feasible mechanism for the reduction of the Pd(OAc)₂ precatalyst. Other species of interest observed include the Pd^IV complex [PdBn₅]^?, which did not fragment via a reductive elimination but lost BnH instead.     

RhI‐Catalyzed Cyclizative Addition Reaction of 1,6‐Enyne and Sulfonyl Chloride by Carbophilic Activation

The π‐acid‐catalyzed cyclizations of 1,n‐enynes by carbophilic activation have been extensively studied and appear as highly attractive processes, yet the cases within a catalytic cycle based on redox principle are rare. Herein, we report the cyclizative addition reactions of 1,6‐enynes and sulfonyl chlorides by using a [Rh(cod)Cl/dppf] (dppf=1,1′‐bis(diphenylphosphino)ferrocene) catalyst system. The process features the involvement of oxidative addition of sulfonyl chloride to Rh^I catalyst, which generates [(dppf)(RSO₂)RhCl₂] as a π‐acid species to trigger cyclizative addition in a 6‐endo‐dig manner by carbophilic activation. Moreover, the catalytic protocol is also applicable to 1,6‐diene analogues.     

Synthesis and applications of polyvinylpyridine-grafted silica containing palladium nanoparticles as a new heterogeneous catalyst for heck and suzuki coupling reactions

A new catalytic system based on palladium nanoparticles supported on poly(4-vinylpyridine) (P4VPy)-grafted silica is introduced. Aminopropylsilica was reacted with acryloyl chloride to form acrylamidopropylsilica. Onto this functionalized silica, 4-vinylpyridine monomer was polymerized by free radical polymerization. The P4VPy-grafted silica was characterized by FT-IR spectroscopy and the amount of (P4VPy) grafted was determind by thermogravimetric analysis (TGA). The complexation of (P4VPy)-grafted silica with Pd(Cl)₂ was carried out to obtain the heterogeneous catalytic system. Transmission electron microscopy images (TEM) showed that palladium dispersed through polymer surface in nanoparticle size. This catalytic system exhibited excellent activity in cross-coupling reactions of aryl iodides, bromides and also chlorides, with olefinic compounds in Heck-Mizoraki, and with benzylbronic acid in Suzuki-Miyaura reactions. The use of aryl chlorides in cross-coupling reactions is usually hardly successful, but excellent results were gained in the presence of terta-n-butylammonium bromide (TBAB) as an additive. The turnover number (TON) of this catalyst reaches up to 9 × 10⁴ in these C-C bond forming reactions. High efficiency of the catalyst along with short reaction time, high yields, easy purification, recyclability, large scale synthesis and simple procedure are among the advantages of this catalytic system     

Preparation and characterization of PEPPSI-palladium N-heterocyclic carbene complexes using benzimidazolium salts catalyzed Suzuki–Miyaura cross coupling reaction and their antitumor and antimicrobial activities

New palladium complexes were efficiently synthesized from the reaction of benzimidazolium salts 2a–e, potassium carbonate (K₂CO₃) and palladium chloride (PdCl₂) in pyridine (for 3a–e). The catalytic activity of these complexes in a catalytic system including palladium complexes and K₂CO₃ in DMF-H₂O was evaluated in Suzuki–Miyaura cross-coupling reactions of aryl bromides and chlorides with phenylboronic acid. Our novel complexes show excellent catalytic activities with high turnover numbers (TON) and high turnover frequencies (TOF) (e.g. for the Suzuki–Miyaura reaction: TON up to 370 and TOF up to 123.3?h^?1). Both benzimidazolium salts 2a–e and complexes 3 have been characterized using spectroscopic data and elemental analysis. The antimicrobial activity of the N-heterocyclic carbene palladium complexes 3a–e varies with the nature of the ligands. Also, the IC₅₀ values of both, complexes (3a–e) and benzimidazoles 2a–e, have been determined. In addition, the new palladium complexes were screened for their antitumor activity. Complexes 3e and 3d exhibited the highest antitumor effect with IC₅₀ values 6.85?μg/mL against MCF-7 and 10.75?μg/mL against T47D, respectively.     

Highly active,air-stable palladium catalysts for the C-C and C-S bond-forming reactions of vinyl and aryl chlorides: use of commercially available [(t-Bu)(2)P(OH)](2)PdCl(2), [(t-Bu)(2)P(OH)PdCl(2)](2), and [[(t-Bu)(2)PO...H...OP(t-Bu)(2)]PdCl](2) as catalysts

Air-stable palladium complexes [(t-Bu)(2)P(OH)](2)PdCl(2), [(t-Bu)(2)P(OH)PdCl(2)](2), and [[(t-Bu)(2)PO...H...OP((t-Bu)(2)]PdCl](2) serve as efficient catalysts for a variety of cross-coupling reactions of vinyl and aryl chlorides with arylboronic acids, arylzinc reagents, and thiols to yield the corresponding styrene derivatives, biaryls, and thioethers. (31)P NMR and mechanistic studies argue that the phosphinous acid ligands in the complexes can be deprotonated in the presence of a base to yield an electron-rich anionic species, which is likely a catalyst intermediate, and dimeric [[(t-Bu)(2)PO...H...OP((t-Bu)(2)]PdCl](2) was isolated and cystallographically characterized. These anionic complexes are anticipated not only to accelerate the rate-determining oxidative addition of aryl chlorides but also to stabilize the palladium complexes in the catalytic cycle.     

Plasmonic heating using an easily recyclable Pd-functionalized Fe3O4/Au core-shell nanoparticle catalyst for the Suzuki and Sonogashira reaction

Palladium functionalized gold nanoparticles were used in the past as a catalyst system in light induced cross-coupling reactions, but with a main limitation of the recuperation. To overcome this problem, a palladium functionalized Fe₃O₄/Au core-shell nanoparticle was successfully synthesized with a peak wavelength of 680 nm from the plasmon resonance of the gold shell. By the presence of the magnetite core, the nanoparticle catalyst can easily be removed using magnetic precipitation. This is accompanied with the advantage of having less valuable gold present in the system. The gold shell makes it possible to induce local heating using plasmon resonance. By this combination, it is possible to recuperate the catalyst system using magnetic precipitation and increase the control and safety of the reaction due to the presence of the light-induced plasmonic heating. It was possible to perform light-induced Suzuki cross-coupling reactions using this catalyst system, but with a dependency of the substrate. It was found that an anionic substrate is repulsed from the negatively charged core-shell nanoparticle. The catalyst was examined on its recuperation abilities and could be reused up to 5 cycles. At the catalytic site a temperature was reached between 40 °C and 45 °C. Despite the promising results of the Suzuki reaction, it was not possible to perform light-induced Sonogashira reactions due to the insufficient heat generation at the catalytic site. Nevertheless, these results are promising in the development of an easily recyclable catalyst together with an alternative heating source, resulting in an increase of control and safety.     

Well‐Defined N‐Heterocyclic Carbene‐Palladium Complexes as Efficient Catalysts for Domino Sonogashira Coupling/Cyclization Reaction and C‐H bond Arylation of Benzothiazole

Well‐defined and air‐stable PEPPSI (Pyridine Enhanced Precatalyst Preparation Stabilization and Initiation) themed palladium bis‐N‐heterocyclic carbene complexes have been developed for the domino Sonogashira coupling/cyclization reaction of 2‐iodophenol with a variety of terminal alkynes and C‐H bond arylation of benzothiazole with aryl iodides. The PEPPSI themed palladium complexes, 2a and 2b were synthesized in good yields from the reaction of corresponding imidazolium salts with PdCl₂ and K₂CO₃ in pyridine. The new air‐stable palladium‐NHC complexes were characterized by NMR spectroscopy, X‐ray crystallography, elemental analysis, and mass spectroscopy studies. The PEPPSI themed palladium(II) bis‐N‐heterocyclic carbene complexes 2a and 2b exhibited excellent catalytic activities for domino Sonogashira coupling/cyclization reaction of 2‐iodophenol with terminal alkynes yielding benzofuran derivatives. In addition, the palladium complexes, 2a and 2b successfully catalyzed the direct C‐H bond arylation of benzothiazole with aryl iodides as coupling partners in presence of CuI as co‐catalyst.     

Bis(oxamato)palladate(II) complexes: synthesis,crystal structure and application to catalytic Suzuki reaction

New bis(oxamato)palladate(II) complexes, [Pd(H₂O)₄][Pd(2,6-Me₂pma)₂]·2H₂O (1), (n-Bu₄N)₂[Pd(2,6-Me₂pma)₂]·2H₂O (2a), and (n-Bu₄N)₂[Pd(2,6-Me₂pma)₂]·2CHCl₃ (2b) (2,6-Me₂pma = N-2,6-dimethylphenyoxamate and n-Bu₄N⁺ = tetra-n-butylammonium), have been synthesized and the structures of 1 and 2b characterized by single-crystal X-ray diffraction. Complex 1 is a double salt constituted by tetraaquapalladium(II) cations and bis(oxamato)palladate(II) anions interlinked by hydrogen bonds. The palladium(II) ions in 1 are four-coordinate with two oxygens and two nitrogens from two fully deprotonated oxamate ligands (anion), and four water molecules (cation) building centrosymmetric square-planar surroundings. Centrosymmetric bis(oxamato)palladate(II) anions occur in 2b as in 1, the charge balance in this compound being ensured by the bulky n-Bu₄N⁺. The catalytic role of 1 and 2a for the Suzuki reaction has been investigated by using a series of aryl iodide/bromide derivatives in the conventional organic medium dimethylformamide. The tetraaquapalladium(II) unit in 1 appears to be active in the catalytic Suzuki cross-coupling reactions, but it readily decomposes to inactive palladium black.     

Preparation and characterization of Cu supported on 2-(1H-benzo[d]imidazol-2-yl)aniline-functionalized Fe3O4 nanoparticles as a novel magnetic catalyst for Ullmann and Suzuki cross-coupling reactions

Copper supported on 2-(1H-benzo[d]imidazol-2-yl)aniline (BIA)-functionalized Fe₃O₄ nanoparticles (Cu-BIA-Si-Fe₃O₄) as a novel magnetic catalyst was designed and used for the synthesis of new products via Ullmann and Suzuki cross-coupling reactions. The Ullmann reaction was performed by mixing arylboronic acid with aniline derivatives in dimethylsulfoxide solvent. Also, diaryls were synthesized via Suzuki C–C reactions between aryl halides and phenylboronic acid in the same solvent. The prepared materials and catalyst were characterized with various analytical techniques. The Cu-BIA-Si-Fe₃O₄ catalyst demonstrated catalytic efficiency with good to excellent yields for both types of reactions in comparison with commercial palladium catalysts. Also, the catalyst could be recovered by a simple filtration and retained its activity even after several cycles.     

PEPPSI-Pd-NHC catalyzed Suzuki-Miyaura cross-coupling reactions in aqueous media

A series of unsymmetrical 1,3-disubstituted benzimidazolium chlorides were synthesized as N-heterocyclic carbene (NHC) precursors. These compounds were used to synthesize of the PEPPSI-type palladium NHC complexes. The structures of all compounds were characterized by ¹H NMR, ¹³C NMR, FT-IR spectroscopy and elemental analyses. The catalytic activity of the PEPPSI-type palladium–NHC complexes has been evaluated with respect to the Suzuki-Miyaura cross-coupling reactions of phenyl boronic acid with various aryl halides in aqueous media.     

Mechanistic Study of Pd/NHC-Catalyzed Sonogashira Reaction: Discovery of NHC-Ethynyl Coupling Process

The product of a revealed transformation—NHC-ethynyl coupling—was observed as a catalyst transformation pathway in the Sonogashira cross-coupling, catalyzed by Pd/NHC complexes. The 2-ethynylated azolium salt was isolated in individual form and fully characterized, including X-ray analysis. A number of possible intermediates of this transformation with common formulae (NHC)_nPd(C₂Ph) (n=1,2) were observed and subjected to collision-induced dissociation (CID) and infrared multiphoton dissociation (IRMPD) experiments to elucidate their structure. Measured bond dissociation energies (BDEs) and IRMPD spectra were in an excellent agreement with quantum calculations for coupling product π-complexes with Pd⁰. Molecular dynamics simulations confirmed the observed multiple CID fragmentation pathways. An unconventional methodology to study catalyst evolution suggests the reported transformation to be considered in the development of new catalytic systems for alkyne functionalization reactions.     

New palladium catalyst immobilized on epoxy resin: synthesis,characterization and catalytic activity

A new thiol‐functionalized epoxy resin as a support for palladium(II) complexes has been synthesized in good yields. A palladium catalyst was ‘heterogenized’ by anchoring [PdCl₂(PhCN)₂] complexes to these thiol‐functionalized polymers via ligand exchange reaction. These new palladium catalysts were tested in Mizoroki–Heck coupling and hydrogenation reactions. The activity of the complexes in terms of yield is comparable to that of homogeneous PdCl₂(PhCN)₂. The stability and a good recycling efficiency of these catalysts make them useful for prolonged use. The constant and good selectivity of the supported catalysts during recycling experiments indicate that they could be useful for practical application in many organic reactions. To characterize the heterogeneous complexes before and after use, X‐ray photoelectron spectroscopy, infrared spectroscopy, scanning electron microscopy, energy dispersive X‐ray microscopy, atomic absorption spectroscopy and time‐of‐flight secondary ion mass spectrometry were applied. Density functional theory calculations were also used to better understand the structures of the obtained palladium complexes. Polythiourethanes contain three atoms, oxygen, nitrogen and sulfur, capable of coordinating to transition metals. We examined the possibility of intra‐ and intermolecular binding for both cis and trans palladium complexes. Copyright © 2015 John Wiley & Sons, Ltd.     

Palladium(II) complexes of (t-butyl salicylidene) diphenyl disulfide diamine: synthesis,structure, spectral characterization and catalytic properties

The hexadentate N₂S₂O₂ donor ligand N,N’-bis(3,5-tert-butylsalicylidene) diphenyl disulfide-2,2’-diamine was synthesised by the condensation of 2-aminophenyl disulfide and 3,5-di-tert-butyl-2-hydroxybenzaldehyde and its molecular structure was confirmed by X-ray studies. One of the tert-butyl groups in the Schiff base has rotational disorder around the C–C bond with ratio 0.56:0.44. The palladium complexes were prepared by the direct reaction of PdCl₂(CH₃CN)₂ and Schiff base ligands N,N’-bis (5-tert-butylsalicylidene) diphenyl disulfide-2,2’-diamine and N,N’-bis(3,5-tert-butylsalicylidene) diphenyl disulfide-2,2’-diamine, respectively. The structure of the metal complexes was characterized by physico-chemical and spectroscopic methods. Palladium is in square-planar geometry bonded to imine nitrogen and phenolic O in both the complexes. The catalytic efficiency of the palladium complexes was evaluated in the cross-coupling reactions; Heck-Mizoroki reaction of iodobenzene and methyl acrylate and the Suzuki-Miyaura reaction of phenylboronic acid and iodobenzene, which gave low to moderate yields. Higher conversions were obtained for 2a as catalyst due to the increase in the number of bulky tertiary butyl groups in the structure.

     

Ferrocenyl-palladium complexes in cross-coupling reactions: a comparative study

Ferrocenecarboxaldehyde hydrazones were converted into palladium complexes on treatment with sodium tetrachloropalladate. The substitution pattern of the ferrocenylhydrazones was found to have a marked influence on the mode the palladium was attached to the organic moiety. The catalytic activity of the new palladium complexes in cross-coupling reactions was examined in detail, and it was compared with conventional catalyst systems.     

Biogenic synthesis of palladium nanoparticles using Boswellia sarrata and their applications in cross-coupling reactions

A facile and green route for biogenic synthesis of palladium nanoparticles (PdNPs) using aqueous extract of nontoxic and renewable Boswellia sarrata leaves is reported. The as-synthesized PdNPs were systematically characterized by using ultraviolet (UV)–visible spectroscopy, X-ray diffraction analysis, scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy. The PdNPs were crystalline and cubic in nature with average particle size of ~6 nm and successfully employed as heterogeneous catalyst in the Suzuki–Miyaura and Mizoroki–Heck cross-coupling reactions. The PdNPs could be recycled up to five times with modest change in the catalytic activity.     

Experimental and theoretical studies of anions of transition-metal chelate complexes in alkylation reactions at a metal atom

Electrochemical reduction of a number of chelate complexes of transition metals (Chel)₂M or (Chel)₂MXY (M=Co, Rh, Ir, or Ni; Chel are anions of dmgH (dmg is dimethylglyoxime), (3,5-di-tert-butyl-4-hydroxyphenyl)mgH (mg is methylglyoxime),N-aryl-3-methoxysalicylaldoxime,N-aryl-3-methyl-2-thiocarboxamidopyridine, or 2-acetylindan-1,3-dione; X=Y=py, Ph₃P, or H₂O or X=Cl and Y=Ph₃P) in MeCN or DMF was studied using the cyclic voltammetry and rotating disk electrode techniques. Under the action of BuⁿBr, some electrochemically generated anions [(Chel)₂M]⁻ enter into the rather fast alkylation reactions (apparently, at the metal atom) to form (Chel)₂M—Alk. The geometries of four model neutral and anionic cobalt complexes were calculated using the semiempirical ZINDO/1 method. According to calculations, the transformation of the neutral complex (Chel)₂M into the anion [(Chel)₂M]⁻ leads to a change in the configuration from square-planar to square-pyramidal or from tetrahedral to disphenoid. The effects of steric hindrances, the HOMO energies, and the charge of the metal atom in the anionic complexes on the alkylation reactions at the metal atom are discussed. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 71–77, January, 1999.