Mixed‐Halide CH3NH3PbI3−xXx (X=Cl,Br, I) Perovskites: Vapor‐Assisted Solution Deposition and Application as Solar Cell Absorbers

There have been recent reports on the formation of single‐halide perovskites, CH₃NH₃PbX₃ (X=Cl, Br, I), by means of vapor‐assisted solution processing. Herein, the successful formation of mixed‐halide perovskites (CH₃NH₃PbI_3?xX_x) by means of a vapor‐assisted solution method at ambient atmosphere is reported. The perovskite films are synthesized by exposing PbI₂ film to CH₃NH₃X (X=I, Br, or Cl) vapor. The prepared perovskite films have uniform surfaces with good coverage, as confirmed by SEM images. The inclusion of chlorine and bromine into the structure leads to a lower temperature and shorter reaction time for optimum perovskite film formation. In the case of CH₃NH₃PbI_3?xCl_x, the optimum reaction temperature is reduced to 100 °C, and the resulting phases are CH₃NH₃PbI₃ (with trace Cl) and CH₃NH₃PbCl₃ with a ratio of about 2:1. In the case of CH₃NH₃PbI_3?xBr_x, single‐phase CH₃NH₃PbI₂Br is formed in a considerably shorter reaction time than that of CH₃NH₃PbI₃. The mesostructured perovskite solar cells based on CH₃NH₃PbI₃ films show the best optimal power conversion efficiency of 13.5 %, whereas for CH₃NH₃PbI_3?xCl_x and CH₃NH₃PbI_3?xBr_x the best recorded efficiencies are 11.6 and 10.5 %, respectively.     

Centimeter-Size Single Crystals of Halide Perovskite Photoferroelectric Solid Solution with Ultrahigh Pyroelectricity Boosted Photodetection

Photoferroelectrics, especially emerging halide perovskite ferroelectrics, have motivated tremendous interests owing to their fascinating bulk photovoltaic effect (BPVE) and cross-coupled functionalities. However, solid solutions of halide perovskite photoferroelectrics with controllable structure and enhanced performance are scarcely explored. Herein, through mixing cage cation, a homogeneous halide perovskite photoferroelectric PA₂FA_xMA_1−xPb₂Br₇ solid solution (PA, FA and MA are CH₃CH₂CH₂NH₃⁺, NH₂CHNH₂⁺ and CH₃NH₃⁺, 0≤x≤1) has been developed, which demonstrates tunable Curie temperature in a wide range of 263–323 K and excellent optoelectrical features. As the component adjusted to x=0.7, the bulk crystal demonstrates ultrahigh pyroelectric coefficient up to 1.48 μC cm⁻² K⁻¹ around room temperature. Strikingly, benefiting from the light-induced pyroelectricity and remarkable BPVE, a self-powered and sensitive photodetector based solid solution crystals with boosted responsivity and detectivity over than 1300 % has been achieved. This pioneering work sheds light on the exploration of photoferroelectric solid solutions towards high-performance photoelectronic devices.     

Unraveling the Role of Monovalent Halides in Mixed‐Halide Organic–Inorganic Perovskites

The performance of perovskite solar cells is strongly influenced by the composition and microstructure of the perovskite. A recent approach to improve the power conversion efficiencies utilized mixed‐halide perovskites, but the halide ions and their roles were not directly studied. Unraveling their precise location in the perovskite layer is of paramount importance. Here, we investigated four different perovskites by using X‐ray photoelectron spectroscopy, and found that among the three studied mixed‐halide perovskites, CH₃NH₃Pb(I_0.74Br_0.26)₃ and CH₃NH₃PbBr_3?xCl_x show peaks that unambiguously demonstrate the presence of iodide and bromide in the former, and bromide and chloride in the latter. The CH₃NH₃PbI_3?xCl_x perovskite shows anomalous behavior, the iodide content far outweighs that of the chloride; a small proportion of chloride, in all likelihood, resides deep within the TiO₂/absorber layer. Our study reveals that there are many distinguishable structural differences between these perovskites, and that these directly impact the photovoltaic performances.     

Ion‐Exchange‐Induced 2D–3D Conversion of HMA1−xFAxPbI3Cl Perovskite into a High‐Quality MA1−xFAxPbI3 Perovskite

High‐quality phase‐pure MA_1?xFA_xPbI₃ planar films (MA=methylammonium, FA=formamidinium) with extended absorption and enhanced thermal stability are difficult to deposit by regular simple solution chemistry approaches owing to crystallization competition between the easy‐to‐crystallize but unwanted δ‐FAPbI₃/MAPbI₃ and FA_xMA_1?xPbI₃ requiring rigid crystallization conditions. Here A 2D–3D conversion to transform compact 2D mixed composition HMA_1?xFA_xPbI₃Cl perovskite precursor films into 3D MA_1?xFA_xPbI₃ (x=0.1–0.9) perovskites is presented. The designed Cl/I and H/FA(MA) ion exchange reaction induced fast transformation of compact 2D perovskite film, helping to form the phase‐pure and high quality MA_1?xFA_xPbI₃ without δ‐FAPbI₃ and MAPbI₃ impurity. In all, we successfully developed a facile one‐step method to fabricate high quality phase‐pure MA_1?xFA_xPbI₃ (x=0.1–0.9) perovskite films by 2D–3D conversion of HMA_1?xFA_xPbI₃Cl perovskite. This 2D–3D conversion is a promising strategy for lead halide perovskite fabrication.     

Modeling of the hydration sphere of gadolinium(III) ion using density functional theory

The hydrated gadolinium(III) ion cluster Gd³⁺ (H₂O)_x, with x = 8,9, was studied using density functional theory. The different conformations of the first hydration shell were calculated. For x = 8, the results for the cubic conformation correspond to previously published Hartree-Fock and MP2 results, whereas much lower energies were found for the square antiprismatic and dodecahedral conformations. For x = 9, the energy of the tricapped trigonal prism is nearly identical to the one of the antiprism plus an extra free water molecule. © 1997 John Wiley & Sons, Inc.     

Alkyl halide/tertiary amine as novel initiators for free radical polymerizations of methyl methacrylate,methyl acrylate and styrene

A series of combinations of alkyl halide with tertiary amine such as ethyl α-bromophenylacetate/tris[2-(dimethylamino)ethyl)]amine (αEBP/Me₆TREN), ethyl 2-bromoisobutyrate/triethylamine (EBiB/TEA), and ethyl 2-chloropropionate/N,N,N′,N′,N′′-pentamethyldiethylenetriamine (ECP/PMDETA) have been developed as novel free radical initiators and used for the polymerizations of methyl acrylate (MA), methyl methacrylate (MMA) and styrene (St). The effects of the structure of alkyl halide and tertiary amine on the polymerization of MA were investigated. Gel permeation chromatograph (GPC) and proton nuclear magnetic resonance (¹H NMR) have been utilized to analyze the end group of the obtained poly(methyl acrylate). Electron spin resonance (ESR) spectroscopy was employed to identify the structure of the radicals produced by αEBP/Me₆TREN, and the results indicated that αEBP reacted with Me₆TREN via a single electron transfer (SET) nucleophilic mechanism to produce corresponding ethyl α-phenylacetate radicals which subsequently initiated the polymerization of MA. As both alkyl halide and tertiary amine are commercially available at low cost, non-explosive, and ease of use and storage in comparison with conventional azo, peroxide or persulfate initiators, the combination of alkyl halide and tertiary amine as a free radical initiator is promising for large-scale practical applications.     

Accelerated Interfacial Charge Transfer in Br-Gradient MAPbI3-xBrx Perovskite Thin Films?

Mixed halide perovskites (MHPs) are a class of semiconductor materials with great promise for many optoelectronic applications due to their outstanding photophysical properties. Understanding and tailoring the photogenerated carrier dynamics is essential for further improvement of perovskite performance. Herein, we report a study about the carrier transport and interfacial charge transfer dynamics in Br-gradient MAPbI_3-xBr_x perovskite thin films prepared by surface ion-exchange method. Driven by the bandgap gradient in MAPbI_3-xBr_x films, the accelerated internal hole transport and enhanced interfacial extraction efficiency were both observed. Meanwhile, the interfacial electron transfer was also found to be evidently facilitated due to the surface modification during post-treatment. Our findings suggest the possibility of simultaneous acceleration of interfacial electron and hole transfer processes in halide perovskite films via surface post-treatment technique, which is of great importance in further improving the power conversion efficiency of perovskite solar cells.     

Molecular Disorder Induces an Unusual Phase Transition in a Potential 2D Chiral Ferroelectric Perovskite

Two-dimensional hybrid halide perovskites with single chiral and ferroelectricity together with various structural phase transitions provide the possibility for more diverse functional properties. Here, we present a 2D chiral hybrid halide perovskite ferroelectric, [C₆H₅(CH₂)₄NH₃]₂CdCl₄ (4PBA−CdCl₄, 4PBA=4-phenylbutylamine) that experiences two continuous phase transitions from centrosymmetric triclinic P to polar chiral monoclinic P2 and then to another centrosymmetric tetragonal P4/mmm with increasing temperature, accompanied by symmetry breaking, due to the prominent octahedral distortion and disorder transformation of organic 4PBA cations. In the polar chiral phase, 4PBA−CdCl₄ gives a significant CD signal and has a moderate ferroelectric polarization of 0.35 μC/cm². In addition, 4PBA−CdCl₄ occupies a wide band gap of 4.376 eV that is chiefly contributed by the inorganic CdCl₆ octahedron. This finding offers an alternative pathway for designing new phase transitions and related physical properties in hybrid halide perovskites and other hybrid crystals.     

Stabilizing RbPbBr3 Perovskite Nanocrystals through Cs+ Substitution

ABX₃-type halide perovskite nanocrystals (NCs) have been a hot topic recently due to their fascinating optoelectronic properties. It has been demonstrated that A-site ions have an impact on their photophysical and chemical properties, such as the optical band gap and chemical stability. The pursuit of halide perovskite materials with diverse A-site species would deepen the understanding of the structure–property relationship of the perovskite family. In this work we have attempted to synthesize rubidium-based perovskite NCs. We have discovered that the partial substitution of Rb⁺ by Cs⁺ help to stabilize the orthorhombic RbPbBr₃ NCs at low temperature, which otherwise can only be obtained at high temperature. The inclusion of Cs⁺ into the RbPbBr₃ lattice results in highly photoluminescent Rb_1−xCs_xPbBr₃ NCs. With increasing amounts of Cs⁺, the band gaps of the Rb_1−xCs_xPbBr₃ NCs decrease, leading to a redshift of the photoluminescence peak. Also, the Rb_1−xCs_xPbBr₃ NCs (x=0.4) show good stability under ambient conditions. This work demonstrates the high structural flexibility and tunability of halide perovskite materials through an A-site cation substitution strategy and sheds light on the optimization of perovskite materials for application in high-performance optoelectronic devices.     

Expanded Analogs of Three-Dimensional Lead-Halide Hybrid Perovskites

Replacing the Pb−X octahedral building unit of A^IPbX₃ perovskites (X=halide) with a pair of edge-sharing Pb−X octahedra affords the expanded perovskite analogs: A^IIPb₂X₆. We report seven members of this new family of materials. In 3D hybrid perovskites, orbitals from the organic molecules do not participate in the band edges. In contrast, the more spacious inorganic sublattice of the expanded analogs accommodates larger pyrazinium-based cations with low-lying π* orbitals that form the conduction band, substantially decreasing the band gap of the expanded lattice. The molecular nature of the conduction band allows us to electronically dope the materials by reducing the organic molecules. By synthesizing derivatives with A^II=pyridinium and ammonium, we can isolate the contributions of the pyrazinium-based orbitals in the band gap transition of A^IIPb₂X₆. The organic-molecule-based conduction band and the inorganic-ion-based valence band provide an unusual electronic platform with localized states for electrons and more disperse bands for holes upon optical or thermal excitation.     

Lead‐ and Iodide‐Deficient (CH3NH3)PbI3 (d‐MAPI): The Bridge between 2D and 3D Hybrid Perovskites

3D and 2D hybrid perovskites, which have been known for more than 20 years, have emerged recently as promising materials for optoelectronic applications, particularly the 3D compound (CH₃NH₃)PbI₃ (MAPI). The discovery of a new family of hybrid perovskites called d ‐MAPI is reported: the association of PbI₂ with both methyl ammonium (MA⁺) and hydroxyethyl ammonium (HEA⁺) cations leads to a series of five compounds with general formulation (MA)_1−2.48x(HEA)_3.48x[Pb_1−xI_3−x]. These materials, which are lead‐ and iodide‐deficient compared to MAPI while retaining 3D architecture, can be considered as a bridge between the 2D and 3D materials. Moreover, they can be prepared as crystallized thin films by spin‐coating. These new 3D materials appear very promising for optoelectronic applications, not only because of their reduced lead content, but also in account of the large flexibility of their chemical composition through potential substitutions of MA⁺, HEA⁺, Pb²⁺ and I⁻ ions.     

Ultrathin Two‐Dimensional Organic–Inorganic Hybrid Perovskite Nanosheets with Bright,Tunable Photoluminescence and High Stability

Two‐dimensional (2D) organic–inorganic hybrid perovskite nanosheets (NSs) are attracting increasing research interest due to their unique properties and promising applications. Here, for the first time, we report the facile synthesis of single‐ and few‐layer free‐standing phenylethylammonium lead halide perovskite NSs, that is, (PEA)₂PbX₄ (PEA=C₈H₉NH₃, X=Cl, Br, I). Importantly, their lateral size can be tuned by changing solvents. Moreover, these ultrathin 2D perovskite NSs exhibit highly efficient and tunable photoluminescence, as well as superior stability. Our study provides a simple and general method for the controlled synthesis of 2D perovskite NSs, which may offer a new avenue for their fundamental studies and optoelectronic applications.     

Ultrathin Two‐Dimensional Organic–Inorganic Hybrid Perovskite Nanosheets with Bright,Tunable Photoluminescence and High Stability

Two‐dimensional (2D) organic–inorganic hybrid perovskite nanosheets (NSs) are attracting increasing research interest due to their unique properties and promising applications. Here, for the first time, we report the facile synthesis of single‐ and few‐layer free‐standing phenylethylammonium lead halide perovskite NSs, that is, (PEA)₂PbX₄ (PEA=C₈H₉NH₃, X=Cl, Br, I). Importantly, their lateral size can be tuned by changing solvents. Moreover, these ultrathin 2D perovskite NSs exhibit highly efficient and tunable photoluminescence, as well as superior stability. Our study provides a simple and general method for the controlled synthesis of 2D perovskite NSs, which may offer a new avenue for their fundamental studies and optoelectronic applications.     

Zusammensetzung und strukturelle Eigenschaften des „zweiwertigen”︁ Kobaltcyanids

The products obtained by mixing aqueous solutions of cobalt (II) chloride and potassium or hydrogen cyanide are nonstoichiometric compounds Co(CN)_x, yH₂O whith x between 2.2 and 2.4 and y between 1.75 and 2.15. They have a cubic face-centered unit cell with a = 10.20 ± 0.02 Å and Z between 6.8 and 7.1 (Z = number of units Co (CN)_x yH₂O per cell). Infrared spectra show that there is zeolitic as well as coordinated water present. The coordination units derived from reflectance spectra in the ultraviolet and visible region are (Co^III)C₆ and Co^IIN_6-xO_x. There exists a close structural relationship between Co(CN)_x, yH₂O and the stoichiometric compound Co₃[Co(CN)₆]₂, zH₂O. Comparison of calculated with experimental density shows that there must be holes in the threedimensional Co? C? N? Co-framework, which can be occupied by water molecules.     

SANS Study of Zirconia-Silica and Titania-Silica Hybrid Materials

New silica-based hybrid materials have been produced by the sol-gel process. Samples with compositions xMO₂·(100 – x)SiO₂ (with M = Zr, Ti and x 10 mol%) were prepared with polydimethylsiloxane, silanol terminated, with different molecular weights. In the present work the microstructure of samples prepared with a volume ratio organic/inorganic of 2/3 was investigated by Small Angle Neutron Scattering. The results show that a rather homogeneous hybrid material can be obtained. It is observed that the polymer is well distributed in the inorganic matrix and that the addition of MO₂ perturbs its local conformation when it has low molecular weight. The inorganic oxide network in the hybrid was found to develop as in pure inorganic dried gels.     

Highly Conducting Organic–Inorganic Hybrid Copper Sulfides CuxC6S6 (x=4 or 5.5): Ligand-Based Oxidation-Induced Chemical and Electronic Structure Modulation

Conductive coordination polymers (CPs) have potential in a wide range of applications because of their inherent structural and functional diversity. Three electrically conductive CPs (Cu_xC₆S₆, x=3, 4 or 5.5) derived from the same organic linker (benzenehexathiol) and metal node (copper(I)) were synthesized and studied. Cu_xC₆S₆ materials are organic–inorganic hybrid copper sulfides comprising a π-π stacking structure and cooper sulfur networks. Charge-transport pathways within the network facilitate conductivity and offer control of the Fermi level through modulation of the oxidation level of the non-innocent redox-active ligand. Two Cu_xC₆S₆ (x=4 or 5.5) CPs display high electrical conductivity and they feature a tunable structural topology and electronic structure. Cu₄C₆S₆ and Cu_5.5C₆S₆ act as degenerate semiconductors. Moreover, Cu_5.5C₆S₆ is a p-type thermoelectric material with a ZT value of 0.12 at 390 K, which is a record-breaking performance for p-type CPs.     

The Rb7Bi3−3xSb3xCl16 Family: A Fully Inorganic Solid Solution with Room-Temperature Luminescent Members

Low-dimensional ns²-metal halide compounds have received immense attention for applications in solid-state lighting, optical thermometry and thermography, and scintillation. However, these are based primarily on the combination of organic cations with toxic Pb²⁺ or unstable Sn²⁺, and a stable inorganic luminescent material has yet to be found. Here, the zero-dimensional Rb₇Sb₃Cl₁₆ phase, comprised of isolated [SbCl₆]³⁻ octahedra and edge-sharing [Sb₂Cl₁₀]⁴⁻ dimers, shows room-temperature photoluminescence (RT PL) centered at 560 nm with a quantum yield of 3.8±0.2 % at 296 K (99.4 % at 77 K). The temperature-dependent PL lifetime rivals that of previous low-dimensional materials with a specific temperature sensitivity above 0.06 K⁻¹ at RT, making it an excellent thermometric material. Utilizing both DFT and chemical substitution with Bi³⁺ in the Rb₇Bi_3−3xSb_3xCl₁₆ (x≤1) family, we present the edge-shared [Sb₂Cl₁₀]⁴⁻ dimer as a design principle for Sb-based luminescent materials.     

Why N-methyleneformamide, CH2N–CHO, prefers gauche-conformation? A DFT/NBO study

Three possible stable conformations of N-methyleneformamide were studied using Weinhold's Natural bond orbital method. Wavefunctions for the NBO analysis were obtained using B3LYP hybrid functional with 6-311+G(d,p) extended basis set. gauche conformation was predicted to be more stable than trans conformation by ≈2.3 kcal/mol in agreement with earlier studies. At the same time it was found that this preference is due to the strong π_C1–N2↔π_C3–O4 and σ_C3–H5↔n_σN2 repulsive interactions in the planar conformations, and additional conjugative stabilization of the gauche conformation.     

Conformation of the ground-state dimer in poly(ethylene terephthalate)

Absorbance, excitation, and emission measurements have been performed with methyl benzoate and five model compounds, C₆H₅COO (CH₂)_xOOCC₆H₅, x = 2–6. Under appropriate conditions, three of the model compounds (those with x = 3, 4, 5) show evidence for the formation of intramolecular ground-state dimers. The model compound with x = 5 can form two types of dimers which emit with different energies. The model compound with x = 3 forms one of these dimers, and the model compound with x = 4 prefers the other ground-state dimer. Molecular modeling of the dimers suggests that the two conformations of the ground-state dimers differ in the orientation of the two C?O bonds. In the one dimer these two bonds are nearly parallel, but in the other they make an angle of about 120°. © 1993 John Wiley & Sons, Inc.     

Aqueous Synthesis of Methylammonium Lead Halide Perovskite Nanocrystals

Methylammonium lead halide perovskite nanocrystals offer attractive optoelectronic properties but suffer from fast degradation in the presence of water. In contradiction to this observation, we demonstrate the possibility of a direct aqueous synthesis of CH₃NH₃PbX₃ (X=Br or Cl/Br) nanocrystals through the reaction between the lead halide complex and methylamine when the pH is maintained in the range of 0–5. Under these synthetic conditions, the positively charged surface of the perovskite nanocrystals and the proper ionic balance help to prevent their decomposition in water. Additional surface capping with organic amine ligands further improves the photoluminescence quantum yield of the perovskite nanocrystals to values close to 40 %, ensures their stability under ambient conditions for several months, and their photoluminescence performance under continuous 0.1 W mm^?2 405 nm light irradiation for over 250 hours.