A Nanostructured Si/SiOC Composite Anode with Volume-Change-Buffering Microstructure for Lithium-Ion Batteries

Si/SiOC composites are promising high-capacity anode materials for lithium-ion batteries since the SiOC matrix can effectively buffer the volumetric change of Si during cycling. However, a structure of Si nanoparticles (NPs) enwrapped by a continuous SiOC phase typically shows poor cyclic stability and low charge/discharge rate due to structure failure of bulk SiOC shells derived from carbon-rich organosilicon. To address this issue, in this work, an Si/SiOC nanocomposite with volume-change-buffering microstructure, in which Si NPs are uniformly dispersed in a matrix of SiOC nanospheres, has been synthesized. Our results show that the space between Si and SiOC NPs can accommodate the large volume change of Si during cycling and facilitate infiltration of the electrolyte. The nanostructured SiOC skeleton serves as both a mechanically robust buffer to alleviate the intrinsic expansion of Si and an effective electron conductor. The Si/SiOC NP composite displays significantly increased capacity and cyclic stability compared with pure SiOC, and delivers reversible capacities of around 800 mA h⁻¹ g⁻¹ at a current density of 100 mA g⁻¹ (approximately 100 % capacity retention after 100 cycles) and around 600 mA h⁻¹ g⁻¹ at 500 mA g⁻¹ (capacity retention about 80 % after 500 cycles).     

Alkynyl Boosted High-Performance Lithium Storage and Mechanism in Covalent Phenanthroline Framework

The poor conductivity of the pristine bulk covalent organic material is the main challenge for its application in energy storage. The mechanism of symmetric alkynyl bonds (C≡C) in covalent organic materials for lithium storage is still rarely reported. Herein, a nanosized (≈80 nm) alkynyl-linked covalent phenanthroline framework (Alkynyl-CPF) is synthesized for the first time to improve the intrinsic charge conductivity and the insolubility of the covalent organic material in lithium-ion batteries. Because of the high degree of electron conjugation along alkynyl units and N atoms from phenanthroline groups, the Alkynyl-CPF electrodes with the lowest HOMO–LUMO energy gap (ΔE=2.629 eV) show improved intrinsic conductivity by density functional theory (DFT) calculations. As a result, the pristine Alkynyl-CPF electrode delivers superior cycling performance with a large reversible capacity and outstanding rate properties (1068.0 mAh g⁻¹ after 300 cycles at 100 mA g⁻¹ and 410.5 mAh g⁻¹ after 700 cycles at 1000 mA g⁻¹). Moreover, by Raman, FT-IR, XPS, EIS, and theoretical simulations, the energy-storage mechanism of C≡C units and phenanthroline groups in the Alkynyl-CPF electrode has been investigated. This work provides new strategies and insights for the design and mechanism investigation of covalent organic materials in electrochemical energy storage.     

Facile Synthesis of Ultra-Small Few-Layer Nanostructured MoSe2 Embedded on N,P Co-Doped Bio-Carbon for High-Performance Half/Full Sodium-Ion and Potassium-Ion Batteries

Sodium/potassium-ion batteries (SIBs/PIBs) arouse intensive interest on account of the natural abundance of sodium/potassium resources, the competitive cost and appropriate redox potential. Nevertheless, the huge challenge for SIBs/PIBs lies in the scarcity of an anode material with high capacity and stable structure, which are capable of accommodating large-size ions during cycling. Furthermore, using sustainable natural biomass to fabricate electrodes for energy storage applications is a hot topic. Herein, an ultra-small few-layer nanostructured MoSe₂ embedded on N, P co-doped bio-carbon is reported, which is synthesized by using chlorella as the adsorbent and precursor. As a consequence, the MoSe₂/NP-C-2 composite represents exceedingly impressive electrochemical performance for both sodium-ion batteries (SIBs) and potassium-ion batteries (PIBs). It displays a promising reversible capacity (523 mAh g⁻¹ at 100 mA g⁻¹ after 100 cycles) and impressive long-term cycling performance (192 mAh g⁻¹ at 5 A g⁻¹ even after 1000 cycles) in SIBs, which are some of the best properties of MoSe₂-based anode materials for SIBs to date. To further probe the great potential applications, full SIBs pairing the MoSe₂/NP-C-2 composite anode with a Na₃V₂(PO₄)₃ cathode also exhibits a satisfactory capacity of 215 mAh g⁻¹ at 500 mA g⁻¹ after 100 cycles. Moreover, it also delivers a decent reversible capacity of 131 mAh g⁻¹ at 1 A g⁻¹ even after 250 cycles for PIBs.     

In-situ Grown SnO2 Nanospheres on Reduced GO Nanosheets as Advanced Anodes for Lithium-ion Batteries

Nanostructured tin dioxide (SnO₂) has emerged as a promising anode material for lithium-ion batteries (LIBs) due to its high theoretical capacity (1494 mA h g⁻¹) and excellent stability. Unfortunately, the rapid capacity fading and poor electrical conductivity of bulk SnO₂ material restrict its practical application. Here, SnO₂ nanospheres/reduced graphene oxide nanosheets (SRG) are fabricated through in-situ growth of carbon-coated SnO₂ using template-based approach. The nanosheet structure with the external layer of about several nanometers thickness can not only accommodate the volume change of Sn lattice during cycling but also enhance the electrical conductivity effectively. Benefited from such design, the SRG composites could deliver an initial discharge capacity of 1212.3 mA h g⁻¹ at 0.1 A g⁻¹, outstanding cycling performance of 1335.6 mA h g⁻¹ after 500 cycles at 1 A g⁻¹, and superior rate capability of 502.1 mA h g⁻¹ at 5 A g⁻¹ after 10 cycles. Finally, it is believed that this method could provide a versatile and effective process to prepare other metal-oxide/reduced graphene oxide (rGO) 2D nanocomposites.     

Engineering Na−Mo−O/Graphene Oxide Composites with Enhanced Electrochemical Performance for Lithium Ion Batteries

Sodium molybdate (Na−Mo−O) wrapped by graphene oxide (GO) composites have been prepared via a simple in-situ precipitation method at room temperature. The composites are mainly constructed with one dimension (1D) ultra-long sodium molybdate nanorods, which are wrapped by the flexible GO. The introduction of GO is expected to not merely provide more active sites for lithium-ions storage, but also improve the charge transfer rate of the electrode. The testing electrochemical performances corroborated the standpoint: The Na−Mo−O/GO composites delivers specific capacities of 718 mAh g⁻¹ after 100 cycles at 100 mA g⁻¹, and 570 mAh g⁻¹ after 500 cycles at a high rate of 500 mA g⁻¹; for comparison, the bare Na−Mo−O nanorod shows a severe capacity decay, which deliver only 332 mAh g⁻¹ after 100 cycles at 100 mA g⁻¹. In view of the cost-efficient and less time-consuming in synthesis, and one-step preparation without further treatment, these Na−Mo−O nanorods/GO composites present potential and prospective anodes for LIBs.     

Two-Dimensional SnSe2/CNTs Hybrid Nanostructures as Anode Materials for High-Performance Lithium-Ion Batteries

Tin diselenide (SnSe₂), as an anode material, has outstanding potential for use in advanced lithium-ion batteries. However, like other tin-based anodes, SnSe₂ suffers from poor cycle life and low rate capability due to large volume expansion during the repeated Li⁺ insertion/de-insertion process. This work reports an effective and easy strategy to combine SnSe₂ and carbon nanotubes (CNTs) to form a SnSe₂/CNTs hybrid nanostructure. The synthesized SnSe₂ has a regular hexagonal shape with a typical 2D nanostructure and the carbon nanotubes combine well with the SnSe₂ nanosheets. The hybrid nanostructure can significantly reduce the serious damage to electrodes that occurs during electrochemical cycling processes. Remarkably, the SnSe₂/CNTs electrode exhibits a high reversible specific capacity of 457.6 mA h g⁻¹ at 0.1 C and 210.3 mA h g⁻¹ after 100 cycles. At a cycling rate of 0.5 C, the SnSe₂/CNTs electrode can still achieve a high value of 176.5 mA h g⁻¹, whereas a value of 45.8 mA h g⁻¹ is achieved for the pure SnSe₂ electrode. The enhanced electrochemical performance of the SnSe₂/CNTs electrode demonstrates its great potential for use in lithium-ion batteries. Thus, this work reports a facile approach to the synthesis of SnSe₂/CNTs as a promising anode material for lithium-ion batteries.     

Isomer Effect on Energy Storage of π-Extended S-Shaped Double[6]Heterohelicene

Recently, chiral and nonplanar cutouts of graphene have been the favorites due to their unique optical, electronic, and redox properties and high solubility compared with their planar counterparts. Despite the remarkable progress in helicenes, π-extended heterohelicenes have not been widely explored. As an anode in a lithium-ion battery, the racemic mixture of π-extended double heterohelical nanographene containing thienothiophene core exhibited a high lithium storage capability, attaining a specific capacity of 424 mAh g⁻¹ at 0.1 A g⁻¹ with excellent rate capability and superior long-term cycling performance over 6000 cycles with negligible fade. As a first report, the π-extended helicene isomer (PP and MM), with the more interlayer distance that helps faster diffusion of ions, has exhibited a high capacity of 300 mAh g⁻¹ at 2 A g⁻¹ with long-term cycling performance over 1500 cycles compared to the less performing MP and PM isomer and racemic mixture (150 mAh g⁻¹ at 2 A g⁻¹). As supported by single-crystal X-ray analysis, a unique molecular design of nanographenes with a fixed (helical) molecular geometry, avoiding restacking of the layers, renders better performance as an anode in lithium-ion batteries. Interestingly, the recycled nanographene anode material displayed comparable performance.     

Hierarchical Hollow-Nanocube Ni−Co Skeleton@MoO3/MoS2 Hybrids for Improved-Performance Lithium-Ion Batteries

Improving the performance of anode materials for lithium-ion batteries (LIBs) is a hotly debated topic. Herein, hollow Ni−Co skeleton@MoS₂/MoO₃ nanocubes (NCM-NCs), with an average size of about 193 nm, have been synthesized through a facile hydrothermal reaction. Specifically, MoO₃/MoS₂ composites are grown on Ni−Co skeletons derived from nickel–cobalt Prussian blue analogue nanocubes (Ni−Co PBAs). The Ni−Co PBAs were synthesized through a precipitation method and utilized as self-templates that provided a larger specific surface area for the adhesion of MoO₃/MoS₂ composites. According to Raman spectroscopy results, as-obtained defect-rich MoS₂ is confirmed to be a metallic 1T-phase MoS₂. Furthermore, the average particle size of Ni−Co PBAs (≈43 nm) is only about one-tenth of the previously reported particle size (≈400 nm). If assessed as anodes of LIBs, the hollow NCM-NC hybrids deliver an excellent rate performance and superior cycling performance (with an initial discharge capacity of 1526.3 mAh g⁻¹ and up to 1720.6 mAh g⁻¹ after 317 cycles under a current density of 0.2 A g⁻¹). Meanwhile, ultralong cycling life is retained, even at high current densities (776.6 mAh g⁻¹ at 2 A g⁻¹ after 700 cycles and 584.8 mAh g⁻¹ at 5 A g⁻¹ after 800 cycles). Moreover, at a rate of 1 A g⁻¹, the average specific capacity is maintained at 661 mAh g⁻¹. Thus, the hierarchical hollow NCM-NC hybrids with excellent electrochemical performance are a promising anode material for LIBs.     

Pseudocapacitive Lithium Storage of Cauliflower-Like CoFe2O4 for Low-Temperature Battery Operation

Binary transition-metal oxides (BTMOs) with hierarchical micro–nano-structures have attracted great interest as potential anode materials for lithium-ion batteries (LIBs). Herein, we report the fabrication of hierarchical cauliflower-like CoFe₂O₄ (cl-CoFe₂O₄) via a facile room-temperature co-precipitation method followed by post-synthetic annealing. The obtained cauliflower structure is constructed by the assembly of microrods, which themselves are composed of small nanoparticles. Such hierarchical micro–nano-structure can promote fast ion transport and stable electrode–electrolyte interfaces. As a result, the cl-CoFe₂O₄ can deliver a high specific capacity (1019.9 mAh g⁻¹ at 0.1 A g⁻¹), excellent rate capability (626.0 mAh g⁻¹ at 5 A g⁻¹), and good cyclability (675.4 mAh g⁻¹ at 4 A g⁻¹ for over 400 cycles) as an anode material for LIBs. Even at low temperatures of 0 °C and −25 °C, the cl-CoFe₂O₄ anode can deliver high capacities of 907.5 and 664.5 mAh g⁻¹ at 100 mA g⁻¹, respectively, indicating its wide operating temperature. More importantly, the full-cell assembled with a commercial LiFePO₄ cathode exhibits a high rate performance (214.2 mAh g⁻¹ at 5000 mA g⁻¹) and an impressive cycling performance (612.7 mAh g⁻¹ over 140 cycles at 300 mA g⁻¹) in the voltage range of 0.5–3.6 V. Kinetic analysis reveals that the electrochemical performance of cl-CoFe₂O₄ is dominated by pseudocapacitive behavior, leading to fast Li⁺ insertion/extraction and good cycling life.     

Structure Engineering of BiSbSx Nanocrystals Embedded within Sulfurized Polyacrylonitrile Fibers for High Performance of Potassium-Ion Batteries

Potassium-ion batteries (PIBs) are regarded as promising candidates in next-generation energy storage technology; however, the electrode materials in PIBs are usually restricted by the shortcomings of large volume expansion and poor cycling stability stemming from a high resistance towards diffusion and insertion of large-sized K ions. In this study, BiSbS_x nanocrystals are rationally integrated with sulfurized polyacrylonitrile (SPAN) fibres through electrospinning technology with an annealing process. Such a unique structure, in which BiSbS_x nanocrystals are embedded inside the SPAN fibre, affords multiple binding sites and a short diffusion length for K⁺ to realize fast kinetics. In addition, the molecular structure of SPAN features robust chemical interactions for stationary diffluent discharge products. Thus, the electrode demonstrates a superior potassium storage performance with an excellent reversible capacity of 790 mAh g⁻¹ (at 0.1 A g⁻¹ after 50 cycles) and 472 mAh g⁻¹ (at 1 A g⁻¹ after 2000 cycles). It's one of the best performances for metal dichalcogenides anodes for PIBs to date. The unusual performance of the BiSbS_x@SPAN composite is attributed to the synergistic effects of the judicious nanostructure engineering of BiSbS_x nanocrystals as well as the chemical interaction and confinement of SPAN fibers.     

Hybrid Sub-1 nm Nanosheets of Co-assembled MnZnCuOx and Polyoxometalate Clusters as Anodes for Li-ion Batteries

Transition metal oxide (TMO) anode materials in lithium-ion batteries (LIBs) usually suffer from serious volume expansion leading to the pulverization of structures, further giving rise to lower specific capacity and worse cycling stability. Herein, by introducing polyoxometalate (POM) clusters into TMOs and precisely controlling the amount of POMs, the MnZnCuO_x-phosphomolybdic acid hybrid sub-1 nm nanosheets (MZC-PMA HSNSs) anode is successfully fabricated, where the special electron rich structure of POMs is conducive to accelerating the migration of lithium ions on the anode to obtain higher specific capacity, and the non-covalent interactions between POMs and TMOs make the HSNSs possess excellent structural and chemical stability, thus exhibiting outstanding electrochemical performance in LIBs, achieving a high reversible capacity (1157 mAh g⁻¹ at 100 mA g⁻¹) and an admirable long-term cycling stability at low and high current densities.     

Electrostatic Interactions Leading to Hierarchical Interpenetrating Electroconductive Networks in Silicon Anodes for Fast Lithium Storage

Recently, the frequency of combining MXene, which has unique properties such as metal-level conductivity and large specific surface area, with silicon to achieve excellent electrochemical performance has increased considerably. There is no doubt that the introduction of MXene can improve the conductivity of silicon and the cycling stability of electrodes after elaborate structure design. However, most exhaustive contacts can only improve the electrode conductivity on the plane. Herein, a MXene@Si/CNTs (HIEN-MSC) composite with hierarchical interpenetrating electroconductive networks has been synthesized by electrostatic self-assembly. In this process, the CNTs are first combined with silicon nanoparticles and then assembled with MXene nanosheets. Inserting CNTs into silicon nanoparticles can not only reduce the latter‘s agglomeration, but also immobilizes them on the three-dimensional conductive framework composed of CNTs and MXene nanosheets. Therefore, the HIEN-MSC electrode shows superior rate performance (high reversible capacity of 280 mA h⁻¹ even tested at 10 A g⁻¹), cycling stability (stable reversible capacity of 547 mA h g⁻¹ after 200 cycles at 1 A g⁻¹) and applicability (a high reversible capacity of 101 mA h g⁻¹ after 50 cycles when assembled with NCM622 into a full cell). These results may provide new insights for other electrodes with excellent rate performance and long-cycle stability.     

Scalable Synthesis of Porous SiFe@C Composite with Excellent Lithium Storage

Utilizing cost-effective raw materials to prepare high-performance silicon-based anode materials for lithium-ion batteries (LIBs) is both challenging and attractive. Herein, a porous SiFe@C (pSiFe@C) composite derived from low-cost ferrosilicon is prepared via a scalable three-step procedure, including ball milling, partial etching, and carbon layer coating. The pSiFe@C material integrates the advantages of the mesoporous structure, the partially retained FeSi₂ conductive phase, and a uniform carbon layer (12–16 nm), which can substantially alleviate the huge volume expansion effect in the repeated lithium-ion insertion/extraction processes, effectively stabilizing the solid–electrolyte interphase (SEI) film and markedly enhancing the overall electronic conductivity of the material. Benefiting from the rational structure, the obtained pSiFe@C hybrid material delivers a reversible capacity of 1162.1 mAh g⁻¹ after 200 cycles at 500 mA g⁻¹, with a higher initial coulombic efficiency of 82.30 %. In addition, it shows large discharge capacities of 803.1 and 600.0 mAh g⁻¹ after 500 cycles at 2 and 4 A g⁻¹, respectively, manifesting an excellent electrochemical lithium storage. This work provides a good prospect for the commercial production of silicon-based anode materials for LIBs with a high lithium-storage capacity.     

In Situ Nitrogen Retention of Carbon Anode for Enhancing the Electrochemical Performance for Sodium-Ion Battery

Retaining nitrogen for polyacrylonitrile (PAN) based carbon anode is a cost-effective way to make full use of the advantages of PAN for sodium-ion batteries (SIBs). Here, a simple strategy has been successfully adopted to retain N atoms in situ and increase production yield of a novel composite PAZ by mixing 3 wt % of zinc borate (ZB) with poly (acrylonitrile-co-itaconic acid) (PANIA). Among the prepared carbonised fibre (CF) samples, PAZ-CF-700 maintains the highest N content, retaining 90 % of the original N from PANIA. It represents the highest capacity storage contribution (80.55 %) and the lowest impedance R_ct (117 Ω). Consequently, the specific capacity increases from 60 mAh g⁻¹ of PANIA-CF-700 to 190 mAh g⁻¹ of PAZ-CF-700 at a current density of 100 mA g⁻¹. At the same time, PAZ-CF-700 exhibits a good rate performance and excellent long-term cycling stability with a specific capacity of 94 mAh g⁻¹ after 4000 cycles at 1.6 A g⁻¹.     

Nitrogen-Linked Hexaazatrinaphthylene Polymer as Cathode Material in Lithium-Ion Battery

Nitrogen-linked hexaazatrinaphthylene polymer ( N²-HATN ) as organic cathode material with low HOMO–LOMO gap was synthesized and was observed to possess reversible high capacity and unexpected long-term cycling stability. The pre-treated N²-HATN and pRGO combination demonstrated good structure compatibility and the resultant cathode exhibited a constant increment of capacity during the redox cycles. The initial capacity at 0.05 A g⁻¹ was 406 mA h⁻¹ g⁻¹, and increased to 630 mA h⁻¹ g⁻¹ after 70 cycles. At 0.5 A g⁻¹ discharging rate, the capacity increased from an initial value of 186 mA h⁻¹ g⁻¹ to 588 mA h⁻¹ g⁻¹ after 1600 cycles. The pseudocapacitance-type behavior is postulated to be attributed to the structure compatibility between the active material and pRGO.     

Biomimetic Straw-Like Bundle Cobalt-Doped Fe2O3 Electrodes towards Superior Lithium-Ion Storage

Biomimetic straw-like bundles of Co-doped Fe₂O₃ (SCF), with Co²⁺ incorporated into the lattice of α-Fe₂O₃, was fabricated through a cost-effective hydrothermal process and used as the anode material for lithium-ion batteries (LIBs). The SCF exhibited ultrahigh initial discharge specific capacity (1760.7 mA h⁻¹ g⁻¹ at 200 mA g⁻¹) and cycling stability (with the capacity retention of 1268.3 mA h⁻¹ g⁻¹ after 350 cycles at 200 mA g⁻¹). In addition, a superior rate capacity of 376.1 mA h⁻¹ g⁻¹ was obtained at a high current density of 4000 mA g⁻¹. The remarkable electrochemical lithium storage of SCF is attributed to the Co-doping, which increases the unit cell volume and affects the whole structure. It makes the Li⁺ insertion–extraction process more flexible. Meanwhile, the distinctive straw-like bundle structure can accelerate Li ion diffusion and alleviate the huge volume expansion upon cycling.     

Two-Dimensional Germanium Sulfide Nanosheets as an Ultra-Stable and High Capacity Anode for Lithium Ion Batteries

Lithium ion batteries (LIBs) at present still suffer from low rate capability and poor cycle life during fast ion insertion/extraction processes. Searching for high-capacity and stable anode materials is still an ongoing challenge. Herein, a facile strategy for the synthesis of ultrathin GeS₂ nanosheets with the thickness of 1.1 nm is reported. When used as anodes for LIBs, the two-dimensional (2D) structure can effectively increase the electrode/electrolyte interface area, facilitate the ion transport, and buffer the volume expansion. Benefiting from these merits, the as-synthesized GeS₂ nanosheets deliver high specific capacity (1335 mAh g⁻¹ at 0.15 A g⁻¹), extraordinary rate performance (337 mAh g⁻¹ at 15 A g⁻¹) and stable cycling performance (974 mAh g⁻¹ after 200 cycles at 0.5 A g⁻¹). Importantly, our fabricated Li-ion full cells manifest an impressive specific capacity of 577 mAh g⁻¹ after 50 cycles at 0.1 A g⁻¹ and a high energy density of 361 Wh kg⁻¹ at a power density of 346 W kg⁻¹. Furthermore, the electrochemical reaction mechanism is investigated by the means of ex-situ high-resolution transmission electron microscopy. These results suggest that GeS₂ can use to be an alternative anode material and encourage more efforts to develop other high-performance LIBs anodes.     

Solution Synthesis of Porous Silicon Particles as an Anode Material for Lithium Ion Batteries

Nanostructured silicon-based materials with porous structures have recently been found to be impressive anode materials with high capacity and cycling performance for lithium-ion batteries. However, the current methods of preparing porous silicon have generally been confronted with the requirement for multiple steps and complex synthesis. In the present study, porous silicon with high surface area was prepared by using a high yielding and simple reaction in which commercial magnesium powder readily reacts with HSiCl₃ with the help of an amine catalyst under mild conditions. The obtained porous silicon was coated with a nitrogen-doped carbon layer and used as the anode for lithium-ion batteries. The porous Si-carbon nanocomposites exhibited excellent cycling performance with a retained discharge capacity of 1300 mA h g⁻¹ after 200 cycles at 1 A g⁻¹ and a discharge capacity of 750 mA h g⁻¹ at a current density of 2 A g⁻¹ after 250 cycles. Remarkably, the Coulombic efficiency was maintained at nearly 100 % throughout the measurements.     

Self-Assembled FeSe2 Microspheres with High-Rate Capability and Long-Term Stability as Anode Material for Sodium- and Potassium-Ion Batteries

Sodium- and potassium-ion batteries have attracted intensive attention recently as low-cost alternatives to lithium-ion batteries with naturally abundant resources. However, the large ionic radii of Na⁺ and K⁺ render their slow mobility, leading to sluggish diffusion in host materials. Herein, hierarchical FeSe₂ microspheres assembled by closely packed nano/microrods are rationally designed and synthesized through a facile solvothermal method. Without carbonaceous material incorporation, the electrode delivers a reversible Na⁺ storage capacity of 559 mA h g⁻¹ at a current rate of 0.1 A g⁻¹ and a remarkable rate performance with a capacity of 525 mA h g⁻¹ at 20 A g⁻¹. As for K⁺ storage, the FeSe₂ anode delivers a high reversible capacity of 393 mA h g⁻¹ at 0.4 A g⁻¹. Even at a high current rate of 5 A g⁻¹, a discharge capacity of 322 mA h g⁻¹ can be achieved, which is among the best high-rate anodes for K⁺ storage. The excellent electrochemical performance can be attributed to the favorable morphological structure and the use of an ether-based electrolyte during cycling. Moreover, quantitative study suggests a strong pseudocapacitive contribution, which boosts fast kinetics and interfacial storage.