A hexaazatriphenylene-based porous organic polymer for high performance supercapacitor

Porous organic polymers (POPs) with high physiochemical stability and pseudocapacitive activity are crucial for supercapacitors with high specific capacitance and long cycle life. We report herein a hexaazatrinaphthylene-based POP (HPOP-1) for high-performance supercapacitor by introducing redox-active hexaazatrinaphthylene (HATN) moiety through Sonogashira–Hagihara coupling reaction. HATN moiety can undergo a proton-induced electron transfer redox reaction, which endows HPOP-1 with high pseudocapacitive activity. As electrode materials for supercapacitor application, HPOP-1 exhibits high specific capacitance (667 F g⁻¹ at 0.5 A g⁻¹) and long-term cyclic stability (90% capacitance retention after 10,000 cycles at 5 A g⁻¹) in a three-electrode system with 1 M H₂SO₄ as the electrolyte. In addition, HPOP-1 also exhibits a specific capacitance of 376 F g⁻¹ at 0.5 A g⁻¹ in 1 M KOH electrolyte. An asymmetric supercapacitor was further fabricated with HPOP-1 as negative electrode and rGO as positive electrode, respectively. The device delivers a specific capacitance of 63 F g⁻¹ at 0.5 A g⁻¹ and a rate performance of 37 F g⁻¹ at 5 A g⁻¹. Our work provides a facile approach for the design and preparation of pseudocapacitive POPs with high specific capacitance and long cycle life.     

Synthesis of Co3O4/CoOOH via electrochemical dispersion using a pulse alternating current method for lithium-ion batteries and supercapacitors

We report a convenient, low-cost and ecofriendly approach for the fabrication of a Co₃O₄/CoOOH electrode material intended for lithium ion batteries (LIBs) and supercapacitors (SCs) using the electrochemical dispersion of the cobalt foil through the pulse alternating current (PAC) method. The synthesized material is a Co₃O₄/CoOOH composite (with about 10–15 wt% CoOOH) in the form of nanosheets with a length of approximately 200 nm and a thickness of 10–20 nm. It is found to exhibit high reversible discharge specific capacities and good cycling behavior while tested as the anode material in LIBs. Measuring the reversible capacitance at high (2C) and low (C/20) cycling rates gives the values of 610 mAh g⁻¹ and 1030 mAh g⁻¹, respectively. The specimen possesses excellent performance as the electrode for SCs with the retention of capacitance up to 98% at the current density increasing from 0.5 to 10 A g⁻¹. After 1000 cycles at a current density of 10 A g⁻¹ the electrode maintains about 90% of its initial capacitance which evidences the long cycle life. Hence, electrochemically prepared Co₃O₄/CoOOH seems to be a promising candidate for high-performance LIBs and SCs applications.     

Electrodeposition of MnO2 nanowires on carbon nanotube paper as free-standing,flexible electrode for supercapacitors

MnO₂ nanowires were electrodeposited onto carbon nanotube (CNT) paper by a cyclic voltammetric technique. The as-prepared MnO₂ nanowire/CNT composite paper (MNCCP) can be used as a flexible electrode for electrochemical supercapacitors. Electrochemical measurements showed that the MNCCP electrode displayed specific capacitances as high as 167.5 F g⁻¹ at a current density of 77 mA g⁻¹. After 3000 cycles, the composite paper can retain more than 88% of initial capacitance, showing good cyclability. The CNT paper in the composite acted as a good conductive and active substrate for flexible electrodes in supercapacitors, and the nanowire structure of the MnO₂ could facilitate the contact of the electrolyte with the active materials, and thus increase the capacitance.     

Hierarchical Carbon Nanowire/Ni@MnO2 Nanocomposites for High-Performance Asymmetric Supercapacitors

A 3D hierarchical carbon cloth/nitrogen-doped carbon nanowires/Ni@MnO₂ (CC/N-CNWs/Ni@MnO₂) nanocomposite electrode was rationally designed and prepared by electrodeposition. The N-CNWs derived from polypyrrole (PPy) nanowires on the carbon cloth have an open framework structure, which greatly increases the contact area between the electrode and electrolyte and provides short diffusion paths. The incorporation of the Ni layer between the N-CNWs and MnO₂ is beneficial for significantly enhancing the electrical conductivity and boosting fast charge transfer as well as improving the charge-collection capacity. Thus, the as-prepared 3D hierarchical CC/N-CNWs/Ni@MnO₂ electrode exhibits a higher specific capacitance of 571.4 F g⁻¹ compared with those of CC/N-CNWs@MnO₂ (311 F g⁻¹), CC/Ni@MnO₂ (196.6 F g⁻¹), and CC@MnO₂ (186.1 F g⁻¹) at 1 A g⁻¹ and remarkable rate capability (367.5 F g⁻¹ at 10 A g⁻¹). Moreover, asymmetric supercapacitors constructed with CC/N-CNWs/Ni@MnO₂ as cathode material and activated carbon as anode material deliver an impressive energy density of 36.4 W h kg⁻¹ at a power density of 900 W kg⁻¹ and a good cycling life (72.8 % capacitance retention after 3500 cycles). This study paves a low-cost and simple way to design a hierarchical nanocomposite electrode with large surface area and superior electrical conductivity, which has wide application prospects in high-performance supercapacitors.     

Highly Dispersible Hexagonal Carbon–MoS2–Carbon Nanoplates with Hollow Sandwich Structures for Supercapacitors

MoS₂, a typical layered transition-metal dichalcogenide, is promising as an electrode material in supercapacitors. However, its low electrical conductivity could lead to limited capacitance if applied in electrochemical devices. Herein, a new nanostructure composed of hollow carbon–MoS₂–carbon was successfully synthesized through an l -cysteine-assisted hydrothermal method by using gibbsite as a template and polydopamine as a carbon precursor. After calcination and etching of the gibbsite template, uniform hollow platelets, which were made of a sandwich-like assembly of partial graphitic carbon and two-dimensional layered MoS₂ flakes, were obtained. The platelets showed excellent dispersibility and stability in water, and good electrical conductivity due to carbon provided by the calcination of polydopamine coatings. The hollow nanoplate morphology of the material provided a high specific surface area of 543 m² g⁻¹, a total pore volume of 0.677 cm³ g⁻¹, and fairly small mesopores (≈5.3 nm). The material was applied in a symmetric supercapacitor and exhibited a specific capacitance of 248 F g⁻¹ (0.12 F cm⁻²) at a constant current density of 0.1 A g⁻¹; thus suggesting that hollow carbon–MoS₂–carbon nanoplates are promising candidate materials for supercapacitors.     

Synthesis of Co3O4/Carbon Heteroaerogels with Ultrahigh Capacitance via Polyethyleneimine Intercalation of Co2BIM4 Nanosheets

The development of metal–organic frameworks (MOFs)-based supercapacitors have attracted intense concentration in recent years due to their regularly arranged porous and tunable pore sizes. However, the performance of the MOFs-derived supercapacitors is also low because of their poor electrical conductivity and rarely accessible active sites. In the present work, we developed a Co-MOF (namely Co₂BIM₄, BIM=benzimidazole) nanosheets derived Co₃O₄/nitrogen-doped carbon (Co₂BIM₄-Co₃O₄/NC) heteroaerogel as a novel supercapacitor electrode. The 3D Co₂BIM₄-Co₃O₄/NC heteroaerogels were obtained by directly intercalating polyethyleneimine (PEI) into the interlayers of Co₂BIM₄ nanosheets and following by carbonizing the resulting Co₂BIM₄/PEI composite. The Co₂BIM₄-Co₃O₄/NC electrode possessed 3D conductive framework with an overlapped hetero-interface and expanded interlayers, leading to fast and stable charge transfer/diffusion and an enhanced pseudocapacitance performance. Therefore, the Co₂BIM₄-Co₃O₄/NC electrode showed ultrahigh capacitance of 2568 F g⁻¹ at 1 A g⁻¹, 1747 F g⁻¹ at 10 A g⁻¹, and excellent long cycling time with a capacitance preservation of 92.7 % following 10000 cycles at 10 A g⁻¹, which is very promising for applications in supercapacitors and other energy storage devices.     

Hierarchical FeCo2S4@FeNi2S4 Core/Shell Nanostructures on Ni Foam for High-Performance Supercapacitors

The design of electrode materials with rational core/shell structures is promising for improving the electrochemical properties of supercapacitors. Hence, hierarchical FeCo₂S₄@FeNi₂S₄ core/shell nanostructures on Ni foam were fabricated by a simple hydrothermal method. Owing to their structure and synergistic effect, they deliver an excellent specific capacitance of 2393 F g⁻¹ at 1 A g⁻¹ and long cycle lifespan as positive electrode materials. An asymmetric supercapacitor device with FeCo₂S₄@FeNi₂S₄ as positive electrode and graphene as negative electrode exhibited a specific capacitance of 133.2 F g⁻¹ at 1 A g⁻¹ and a high energy density of 47.37 W h kg⁻¹ at a power density of 800 W kg⁻¹. Moreover, the device showed remarkable cycling stability with 87.0 % specific-capacitance retention after 5000 cycles at 2 A g⁻¹. These results demonstrate that the hierarchical FeCo₂S₄@FeNi₂S₄ core/shell structures have great potential in the field of electrochemical energy storage.     

Two-Dimensional Layered Metallic VSe2/SWCNTs/rGO Based Ternary Hybrid Materials for High Performance Energy Storage Applications

In this work, the ternary hybrid structure VSe₂/SWCNTs/rGO is reported for supercapacitor applications. The ternary composite exhibits a high specific capacitance of 450 F g⁻¹ in a symmetric cell configuration, with maximum energy density of 131.4 Wh kg⁻¹ and power density of 27.49 kW kg⁻¹. The ternary hybrid also shows a cyclic stability of 91 % after 5000 cycles. Extensive density functional theory (DFT) simulations on the structure as well as on the electronic properties of the binary hybrid structure VSe₂/SWCNTs and the ternary hybrid structure VSe₂/SWCNTs/rGO have been carried out. Due to a synergic effect, there are enhanced density of states near the Fermi level and higher quantum capacitance for the hybrid ternary structure compared to VSe₂/SWCNTs, leading to higher energy and power density for VSe₂/SWCNTs/rGO, supporting our experimental observation. Computed diffusion energy barrier of electrolyte ions (K⁺) predicts that ions move faster in the ternary structure, providing higher charge storage performance.     

Perovskite SrCo0.9Nb0.1O3−δ as an Anion‐Intercalated Electrode Material for Supercapacitors with Ultrahigh Volumetric Energy Density

We have synthesized and characterized perovskite‐type SrCo_0.9Nb_0.1O_3−δ (SCN) as a novel anion‐intercalated electrode material for supercapacitors in an aqueous KOH electrolyte, demonstrating a very high volumetric capacitance of about 2034.6 F cm⁻³ (and gravimetric capacitance of ca. 773.6 F g⁻¹) at a current density of 0.5 A g⁻¹ while maintaining excellent cycling stability with a capacity retention of 95.7 % after 3000 cycles. When coupled with an activated carbon (AC) electrode, the SCN/AC asymmetric supercapacitor delivered a specific energy density as high as 37.6 Wh kg⁻¹ with robust long‐term stability.     

Sodium‐Doped Mesoporous Ni2P2O7 Hexagonal Tablets for High‐Performance Flexible All‐Solid‐State Hybrid Supercapacitors

A simple hydrothermal method has been developed to prepare hexagonal tablet precursors, which are then transformed into porous sodium‐doped Ni₂P₂O₇ hexagonal tablets by a simple calcination method. The obtained samples were evaluated as electrode materials for supercapacitors. Electrochemical measurements show that the electrode based on the porous sodium‐doped Ni₂P₂O₇ hexagonal tablets exhibits a specific capacitance of 557.7 F g^?1 at a current density of 1.2 A g^?1. Furthermore, the porous sodium‐doped Ni₂P₂O₇ hexagonal tablets were successfully used to construct flexible solid‐state hybrid supercapacitors. The device is highly flexible and achieves a maximum energy density of 23.4 Wh kg^?1 and a good cycling stability after 5000 cycles, which confirms that the porous sodium‐doped Ni₂P₂O₇ hexagonal tablets are promising active materials for flexible supercapacitors.     

N-Doped Porous Carbon Derived from Solvent-Free Synthesis of Cross-Linked Triazine Polymers for Simultaneously Achieving CO2 Capture and Supercapacitors

It is highly desirable to design advanced heteroatomic doped porous carbon for wide application. Herein, N-doped porous carbon (NPC) was developed via the fabrication of high nitrogen cross-linked triazine polymers followed by pyrolysis and activation with controllable porous structure. The as-synthesized NPC at the pyrolysis temperature of 700 °C possessed rich nitrogen content (up to 11.51 %) and high specific surface area (1353 m² g⁻¹), which led to a high CO₂ adsorption capability at 5.67 mmol g⁻¹ at 298.15 K and 5 bar pressure and excellent stability. When the activation temperature was at 600 °C, such NPC exhibited a superior electrochemical performance as anode for supercapacitors with a specific capacitance of 158.8 and 113 F g⁻¹ in 6 M KOH at a current density of 1 and 10 A g⁻¹, respectively. Notably, it delivered an excellent stability with capacity retention of 97.4 % at 20 A g⁻¹after 6000 cycles.     

Excellent Capacitive Performance of a Three‐Dimensional Hierarchical Porous Graphene/Carbon Composite with a Superhigh Surface Area

Three‐dimensional hierarchical porous graphene/carbon composite was successfully synthesized from a solution of graphene oxide and a phenolic resin by using a facile and efficient method. The morphology, structure, and surface property of the composite were investigated intensively by a variety of means such as scanning electron microscopy (SEM), transmission electron microscopy (TEM), N₂ adsorption, Raman spectroscopy, and Fourier transform infrared spectroscopy (FTIR). It is found that graphene serves as a scaffold to form a hierarchical pore texture in the composite, resulting in its superhigh surface area of 2034 m²g^?1, thin macropore wall, and high conductivity (152 S m^?1). As evidenced by electrochemical measurements in both EMImBF₄ ionic liquid and KOH electrolyte, the composite exhibits ideal capacitive behavior, high capacitance, and excellent rate performance due to its unique structure. In EMImBF₄, the composite has a high energy density of up to 50.1 Wh kg^?1 and also possesses quite stable cycling stability at 100 °C, suggesting its promising application in high‐temperature supercapacitors. In KOH electrolyte, the specific capacitance of this composite can reach up to an unprecedented value of 186.5 F g^?1, even at a very high current density of 50 A g^?1, suggesting its prosperous application in high‐power applications.     

Mixed Cu2Se Hexagonal Nanosheets@Co3Se4 Nanospheres for High-Performance Asymmetric Supercapacitors

Rational designing and constructing multiphase hybrid electrode materials is an effective method to compensate for the performance defects of the single component. Based on this strategy, Cu₂Se hexagonal nanosheets@Co₃Se₄ nanospheres mixed structures have been fabricated by a facile two-step hydrothermal method. Under the synergistic effect of the high ionic conductivity of Cu₂Se and the remarkable cycling stability of Co₃Se₄, Cu₂Se@Co₃Se₄ can exhibit outstanding electrochemical performance as a novel electrode material. The as-prepared Cu₂Se@Co₃Se₄ electrode displays high specific capacitance of 1005 F g⁻¹ at 1 A g⁻¹ with enhanced rate capability (56 % capacitance retention at 10 A g⁻¹), and ultralong lifespan (94.2 % after 10 000 cycles at 20 A g⁻¹). An asymmetric supercapacitor is assembled applying the Cu₂Se@Co₃Se₄ as anode and graphene as cathode, which delivers a wide work potential window of 1.6 V, high energy density (30.9 Wh kg⁻¹ at 0.74 kW kg⁻¹), high power density (21.0 Wh kg⁻¹ at 7.50 kW kg⁻¹), and excellent cycling stability (85.8 % after 10 000 cycles at 10 A g⁻¹).     

Multi-stage Ordered Mesoporous Carbon-graphene Aerogel-Ni3S2/Co4S3 for Supercapacitor Electrode

Transition metal sulfides have emerged as promising materials in supercapacitor. In this work, we firstly developed an interface-induced superassembly approach to fabricate NiS_x and CoS_x nanoparticles, which based on ordered mesoporous carbon-graphene aerogel composites for supercapacitor electrodes. The obtained multi-component superassembled nanoparticles-carbon matrix composites have controllable 3D porous structure of multi-stage composite. The two-dimensional graphene interlaced to form a 3D framework with large sponge-like pores, and then the graphene surface was loaded with mesoporous carbon with mesoporous pore size and vertical orientation. The composites display high specific capacitance of 958.1 F g⁻¹ at 0.1 A g⁻¹. The capacitance retains about 97.3 % after 3000 charging-discharging cycles at 2 A g⁻¹. These results indicate that the obtained OMC−GA−Ni₃S₂/Co₄S₃ is a promising material for electrochemical capacitors, which providing new technical methods and ideas for the research of new energy and analytical sensor materials in the fields of energy storage, photocatalysis, point-of-care testing devices and other fields.     

A facile synthesis of hierarchical porous carbon derived from renewable lignin for high-performance supercapacitor

In this work, we proposed a facile one-pot pyrolysis method to conveniently manufacture lignin-derived carbon materials with graded porous construction for use in supercapacitors. The renewable lignin was selected as precursor, while the potassium citrate was used as a pore-forming agent. The properties of the prepared lignin-derived carbon (LAC) and the performance for supercapacitor application were thoroughly evaluated. The LAC at optimal preparation conditions shows a layered porous structure with a large specific surface area of 3174 cm² g⁻¹ and pore volume of 2.796 cm³ g⁻¹, where the specific capacitance reach to 241 F g⁻¹ at 1 A g⁻¹ scan rate in 6 M KOH electrolyte solution. At the same time, the specific capacitance remains at 220 F g⁻¹ even at an excessive scan velocity of 20 A g⁻¹, while the capacitance retention is still close to 91.3%. The capacitance retention rate is stable above 95% after 10,000 charge/discharge cycles, which shows the desired long-time stability. All these results demonstrate the outstanding properties of the new prepared LAC material and the considerable application potential in the field of electrical energy storage.     

Facile synthesis of polyaniline/TiO2/graphene oxide composite for high performance supercapacitors

The polyaniline/TiO₂/graphene oxide (PANI/TiO₂/GO) composite, as a novel supercapacitor material, is synthesized by in situ hydrolyzation of tetrabutyl titanate and polymerization of aniline monomer in the presence of graphene oxide. The morphology, composition and structure of the composites as-obtained are characterized by SEM, TEM, XRD and TGA. The electrochemical property and impedance of the composites are studied by cyclic voltammetry and Nyquist plot, respectively. The results show that the introduction of the GO and TiO₂ enhanced the electrode conductivity and stability, and then improved the supercapacitive behavior of PANI/TiO₂/GO composite. Significantly, the electrochemical measurement results show that the PANI/TiO₂/GO composite has a high specific capacitance (1020 F g⁻¹ at 2 mV s⁻¹, 430 F g⁻¹ at 1 A g⁻¹) and long cycle life (over 1000 times).     

In situ synthesis of crosslinked-polyaniline nano-pillar arrays/reduced graphene oxide nanocomposites for supercapacitors

Crosslinked-polyaniline (CPA) nano-pillar arrays adsorbed on the surface of reduced graphene oxide (RGO) sheets were synthesized by in situ solution polymerization through two steps of reduction. The electrochemical analyses demonstrated that the befittingly reduced CPA/RGO composite exhibited high performance as electrode materials for supercapacitors. The CPA/RGO composite showed very high specific capacitance of 1532 F g^?1 at a scan rate of 10 mV s^?1 or 694 F g^?1 at a current density of 2 A g^?1 in 1 M H₂SO₄ electrolyte, as well as great energy density of 61.4 W h kg^?1 at a current density of 2 A g^?1. The electrode material also had decent power density of 4 kW kg^?1 at a current density of 10 A g^?1, and good cycling stability of 92.5 % capacitance retained after 500 cycles of cyclic voltammetry at 500 mV s^?1. The neat microstructures and super electrochemical properties suggest the potential use of the composites in supercapacitors.     

Rational Design of Porous Structured Nickel Manganese Sulfides Hexagonal Sheets-in-Cage Structures as an Advanced Electrode Material for High-Performance Electrochemical Capacitors

The design of hierarchical electrodes comprising multiple components with a high electrical conductivity and a large specific surface area has been recognized as a feasible strategy to remarkably boost pseudocapacitors. Herein, we delineate hexagonal sheets-in-cage shaped nickel–manganese sulfides (Ni-Mn-S) with nanosized open spaces for supercapacitor applications to realize faster redox reactions and a lower charge-transfer resistance with a markedly enhanced specific capacitance. The hybrid was facilely prepared through a two-step hydrothermal method. Benefiting from the synergistic effect between Ni and Mn active sites with the improvement of both ionic and electric conductivity, the resulting Ni-Mn-S hybrid displays a high specific capacitance of 1664 F g⁻¹ at a current density of 1 A g⁻¹ and a capacitance of 785 F g⁻¹ is maintained at a current density of 50 A g⁻¹, revealing an outstanding capacity and rate performance. The asymmetric supercapacitor device assembled with the Ni-Mn-S hexagonal sheets-in-cage as the positive electrode delivers a maximum energy density of 40.4 Wh kg⁻¹ at a power density of 750 W kg⁻¹. Impressively, the cycling retention of the as-fabricated device after 10 000 cycles at a current density of 10 A g⁻¹ reaches 85.5 %. Thus, this hybrid with superior capacitive performance holds great potential as an effective charge-storage material.     

The loading of polyoxometalates based compound on reduced graphene oxide,a composite material for electrical energy storage and tetracycline removal

A polyoxometalate based composite material (NiPW₁₂NP/FrGO) was synthesized successfully, in which the nanoparticle of a polyoxometalate compound (NiPW₁₂NP) distributes on carboxylate group functionalized reduced graphene oxide (FrGO) homogenously. There exist intensive chemical bonds between NiPW₁₂NP and FrGO, which guarantees the stability of this composite material. When employed as a cathode material, NiPW₁₂NP/FrGO exhibits high specific capacitance, remarkable rate capability and long-term stability. When the current density is 4 A g⁻¹, a specific capacitance as high as 437.6 F g⁻¹ is achieved by NiPW₁₂NP/FrGO. With NiPW₁₂NP/FrGO serving as cathode and MnO₂ acting as anode, a high performance asymmetric supercapacitor (ASC) is assembled, which possesses a high energy density of 12.96 W h·kg⁻¹ at 0.67 kW kg⁻¹. It also shows a good rate capability, when the current density increases from 4 to 12 A g⁻¹, its specific capacitances decreases from 115.2 to 90.9 F g⁻¹, with 78.9% capacitance retention. After 5000 cycles charge-discharge experiments, 94.3% of its capacitance can be maintained, which exhibits good stability. Furthermore, NiPW₁₂NP/FrGO composite material also shows excellent tetracycline adsorption ability with capacity 288.28 mg g⁻¹, the adsorption can be well described with Temkin model, which suggests electrostatic attraction dominates the adsorption process.     

Comparative Study of the Supercapacitive Performance of Three Ferrocene-Based Structures: Targeted Design of a Conductive Ferrocene-Functionalized Coordination Polymer as a Supercapacitor Electrode

As redox-active based supercapacitors are known as highly desirable next-generation supercapacitor electrodes, the targeted design of two ferrocene-functionalized (Fc(COOH)₂) clusters based on coinage metals, [(PPh₃)₂AgO₂CFcCO₂Ag(PPh₃)₂]₂ ⋅ 7 CH₃OH (SC₁: super capacitor) and [(PPh₃)₃CuO₂CFcCO₂Cu(PPh₃)₃] ⋅ 3 CH₃OH (SC₂), is reported. Both structures are fully characterized by various techniques. The structures are utilized as energy storage electrode materials, giving 130 F g⁻¹ and 210 F g⁻¹ specific capacitance at 1.5 A g⁻¹ in Na₂SO₄ electrolyte, respectively. The obtained results show that the presence of Cu^I instead of Ag^I improves the supercapacitive performance of the cluster. Further, to improve the conductivity, the PSC₂ ([(PPh₃)₂CuO₂CFcCO₂]_∞), a polymeric structure of SC₂, was synthesized and used as an energy storage electrode. PSC₂ displays high conductivity and gives 455 F g⁻¹ capacitance at 3 A g⁻¹. The PSC₂ as a supercapacitor electrode presents a high power density (2416 W kg⁻¹), high energy density (161 Wh kg⁻¹), and long cycle life over 4000 cycles (93 %). These results could lead to the amplification of high-performance supercapacitors in new areas to develop real applications and stimulate the use of the targeted design of coordination polymers without hybridization or compositions with additive materials.