钙钛矿量子点在荧光分析检测中的应用

钙钛矿量子点(PQDs)是一种新兴的发光纳米晶体,相较于传统量子点材料,PQDs有着高荧光量子产率、强量子光发射、窄发射带宽、可调谐发射波长等更为优异的光学性能,故而在荧光分析检测领域内具有广阔的应用前景。本文简述了PQDs的结构、合成及其光学调控;综述了PQDs在重金属离子、有机物、气体及阴离子荧光分析检测中的研究进展,对其检测效果及机理展开讨论分析;此外,本文还总结了PQDs在实际应用中存在问题的应对策略及解决思路,展望了其发展前景,以期为PQDs在荧光分析检测领域的进一步应用提供参考。     

Understanding the Impact of Bismuth Heterovalent Doping on the Structural and Photophysical Properties of CH3NH3PbBr3 Halide Perovskite Crystals with Near-IR Photoluminescence

A comprehensive study unveiling the impact of heterovalent doping with Bi³⁺ on the structural, semiconductive, and photoluminescent properties of a single crystal of lead halide perovskites (CH₃NH₃PbBr₃) is presented. As indicated by single-crystal XRD, a perfect cubic structure in Bi³⁺-doped CH₃NH₃PbBr₃ crystals is maintained in association with a slight lattice contraction. Time-resolved and power-dependent photoluminescence (PL) spectroscopy illustrates a progressively quenched PL of visible emission, alongside the appearance of a new PL signal in the near-infrared (NIR) regime, which is likely to be due to energy transfer to the Bi sites. These optical characteristics indicate the role of Bi³⁺ dopants as nonradiative recombination centers, which explains the observed transition from bimolecular recombination in pristine CH₃NH₃PbBr₃ to a dominant trap-assisted monomolecular recombination with Bi³⁺ doping. Electrically, it is found that the mobility in pristine perovskite crystals can be boosted with a low Bi³⁺ concentration, which may be related to a trap-filling mechanism. Aided by temperature (T)-dependent measurements, two temperature regimes are observed in association with different activation energies (E_a) for electrical conductivity. The reduction of E_a at lower T may be ascribed to suppression of ionic conduction induced by doping. The modified electrical properties and NIR emission with the control of Bi³⁺ concentration shed light on the opportunity to apply heterovalent doping of perovskite single crystals for NIR optoelectronic applications.     

ALD-Al2O3涂层保护的高抗湿5-氨基戊酸铰链甲胺铅溴钙钛矿薄膜

近年来,混合铅卤钙钛矿材料在光电领域引发的研究热潮引人注目。然而,钙钛矿材料对水和氧气的敏感性严重的阻碍了其实用化进程。在众多的稳定钙钛矿的方法中,利用简单的原子层沉积方法(Atomic layer deposition,ALD)在钙钛矿表面沉积一层保护层的技术具有极大的潜力。而ALD应用的困难在于,在常规的ALD过程中,做为氧源的H2O和O3对铅卤钙钛矿有着腐蚀作用。在本文,我们提出将双官能团的5-氨基戊酸(5-Aminovaleric acid,AVA)引入到CH₃NH₃PbBr₃(MAPbBr₃)钙钛矿晶格层中,形成稳定的铰链结构的2D/3D钙钛矿AVA(MAPbBr₃)2。AVA的引入可以钝化并防止ALD过程中水对钙钛矿的侵蚀,从而成功地直接在钙钛矿表面沉积了Al₂O₃保护层。覆盖了保护层的AVA(MAPbBr₃)2钙钛矿薄膜获得了优异的热稳定性和抗水性。     

Pseudohalide‐Induced Moisture Tolerance in Perovskite CH3NH3Pb(SCN)2I Thin Films

Two pseudohalide thiocyanate ions (SCN^?) have been used to replace two iodides in CH₃NH₃PbI₃, and the resulting perovskite material was used as the active material in solar cells. In accelerated stability tests, the CH₃NH₃Pb(SCN)₂I perovskite films were shown to be superior to the conventional CH₃NH₃PbI₃ films as no significant degradation was observed after the film had been exposed to air with a relative humidity of 95 % for over four hours, whereas CH₃NH₃PbI₃ films degraded in less than 1.5 hours. Solar cells based on CH₃NH₃Pb(SCN)₂I thin films exhibited an efficiency of 8.3 %, which is comparable to that of CH₃NH₃PbI₃ based cells fabricated in the same way.     

In Situ Ligand Bonding Management of CsPbI3 Perovskite Quantum Dots Enables High-Performance Photovoltaics and Red Light-Emitting Diodes

To fine-tune surface ligands towards high-performance devices, we developed an in situ passivation process for all-inorganic cesium lead iodide (CsPbI₃) perovskite quantum dots (QDs) by using a bifunctional ligand, L-phenylalanine (L-PHE). Through the addition of this ligand into the precursor solution during synthesis, the in situ treated CsPbI₃ QDs display significantly reduced surface states, increased vacancy formation energy, higher photoluminescence quantum yields, and much improved stability. Consequently, the L-PHE passivated CsPbI₃ QDs enabled the realization of QD solar cells with an optimal efficiency of 14.62 % and red light-emitting diodes (LEDs) with a highest external quantum efficiency (EQE) of 10.21 %, respectively, demonstrating the great potential of ligand bonding management in improving the optoelectronic properties of solution-processed perovskite QDs.     

表面修饰CdTe量子点的合成及其光学特性

在水相中合成高发光性能的CdTe量子点,研究以巯基乙酸(TGA)为稳定剂对CdTe表面进行修饰,制备在水中分散性良好的纳米晶,通过对CdTe量子点合成反应条件的摸索,掌握了其合成的反应规律.同时用紫外分光光度计、荧光分光光度计和透射电子显微镜对其进行了表征.结果表明,回流时间、n(Cd²⁺):n(HTe^-)、反应物浓度、TGA用量、反应体系pH值,对纳米晶的光学性质具有显著影响.回流2 h制得的CdTe纳米粒子直径约为5 nm,其发射峰窄且对称,表现出良好稳定的光学性质.     

Investigation of the Stability of Methylammonium Lead Iodide (MAPbI3) Film Doped with Lead Cesium Triiodide (CsPbI3) Quantum Dots under an Oxygen Plasma Atmosphere

In this study, we describe composited perovskite films based on the doping of lead cesium triiodide (CsPbI₃) quantum dots (QDs) into methylammonium lead iodide (MAPbI₃). CsPbI₃ QDs and MAPbI₃ were prepared by ligand-assisted re-precipitation and solution mixing, respectively. These films were optimized by oxygen plasma treatment, and the effect of powers from 0 to 80 W on the structural properties of the composited perovskite films is discussed. The experimental results showed that the light-harvesting ability of the films was enhanced at 20 W. The formation of the metastable state (lead(II) oxide and lead tetroxide) was demonstrated by peak differentiation-imitating. A low power enhanced the quality of the films due to the removal of organic impurities, whereas a high power caused surface damage in the films owing to the severe degradation of MAPbI₃.     

Electrochemically Determining Electronic Structure of ZnO Quantum Dots with Different Surface Ligands

The electronic structure of quantum dots (QDs) including band edges and possible trap states is an important physical property for optoelectronic applications. The reliable determination of the energy levels of QDs remains a big challenge. Herein we employ cyclic voltammetry (CV) to determine the energy levels of three types of ZnO QDs with different surface ligands. Coupled with spectroscopic techniques, it is found that the onset potential of the first reductive wave is likely related to the conduction band edges while the first oxidative wave originates from the trap states. The determined specific energy levels in CV further demonstrates that the ZnO QDs without surface ligands mainly have oxygen interstitial defects whilst the ZnO QDs covered with ligands contain oxygen vacancies. The present electrochemical method offers a powerful and effective way to determine the energy levels of wide bandgap ZnO QDs, which will boost their device performance.     

Near‐Infrared Emission from Tin–Lead (Sn–Pb) Alloyed Perovskite Quantum Dots by Sodium Doping

Phase‐stable CsSn_xPb_1?xI₃ perovskite quantum dots (QDs) hold great promise for optoelectronic applications owing to their strong response in the near‐infrared region. Unfortunately, optimal utilization of their potential is limited by the severe photoluminescence (PL) quenching, leading to extremely low quantum yields (QYs) of approximately 0.3 %. The ultra‐low sodium (Na) doping presented herein is found to be effective in improving PL QYs of these alloyed QDs without alerting their favourable electronic structure. X‐ray photoelectron spectroscopy (XPS) studies suggest the formation of a stronger chemical interaction between I^? and Sn²⁺ ions upon Na doping, which potentially helps to stabilize Sn²⁺ and suppresses the formation of I vacancy defects. The optimized PL QY of the Na‐doped QDs reaches up to around 28 %, almost two orders of magnitude enhancement compared with the pristine one.     

(CH3NH3)2PdCl4: A Compound with Two‐Dimensional Organic–Inorganic Layered Perovskite Structure

The synthesis of previously unknown perovskite (CH₃NH₃)₂PdCl₄ is reported. Despite using an organic cation with the smallest possible alkyl group, a 2D organic–inorganic layered Pd‐based perovskites was still formed. This demonstrates that Pd‐based 2D perovskites can be obtained even if the size of the organic cation is below the size limit predicted by the Goldschmidt tolerance‐factor formula. The (CH₃NH₃)₂PdCl₄ phase has a bulk resistivity of 1.4 Ω cm, a direct optical gap of 2.22 eV, and an absorption coefficient on the order of 10⁴ cm^?1. XRD measurements suggest that the compound is moderately stable in air, an important advantage over several existing organic–inorganic perovskites that are prone to phase degradation problems when exposed to the atmosphere. Given the recent interest in organic–inorganic perovskites, the synthesis of this new Pd‐based organic–inorganic perovskite may be helpful in the preparation and understanding of other organic–inorganic perovskites.     

石墨烯量子点在生化分析中的应用研究进展

介绍了石墨烯量子点（GQDs）在生化分析领域如生物分子检测、金属离子检测、细菌检测、细胞成像、组织成像以及活体成像等方面的最新研究动态。     

多色高发光效率CsPbX3(X=Cl,Br,I)钙钛矿量子点的制备及其在发光二极管中的应用

采用室温合成法制备出一系列具有高发光效率和多色发光的CsPbX₃钙钛矿量子点(PQDs),反应全过程快速简便,且通过调节不同的卤素组成(Cl,Br,I)可以实现CsPbX₃ PQD的多色发光。 通过表征证明,CsPbX₃ PQDs呈立方晶型,平均粒径约为10 nm,发射光谱覆盖可见光波长范围为410~630 nm,半峰宽14~38 nm,荧光量子产率10%~90%。 最后将CsPbX₃ PQDs应用于发光二极管(LED)器件的制备中,在恒定电压下工作时,能保持LED器件的发光颜色、强度和颜色坐标不变。     

表面富S2-的CdS量子点的合成及其与甲硝唑的作用

在冰水浴条件下,用柠檬酸三钠和六偏磷酸钠为稳定剂,通过控制较低浓度的氯化镉溶液和硫化钠溶液缓慢反应,合成了荧光稳定性好、表面富硫的水溶性CdS量子点。利用荧光光谱、紫外-可见吸收光谱和共振光散射光谱研究了CdS量子点与甲硝唑相互作用的光谱行为,发现甲硝唑与CdS富硫表面的过量S2-的结合引起量子点的荧光猝灭效应,甲硝唑对CdS荧光量子点的荧光猝灭为静态猝灭,它们主要以静电引力结合。     

Engineering of CH3NH3PbI3 Perovskite Crystals by Alloying Large Organic Cations for Enhanced Thermal Stability and Transport Properties

The number of studies on organic–inorganic hybrid perovskites has soared in recent years. However, the majority of hybrid perovskites under investigation are based on a limited number of organic cations of suitable sizes, such as methylammonium and formamidinium. These small cations easily fit into the perovskite's three‐dimensional (3D) lead halide framework to produce semiconductors with excellent charge transport properties. Until now, larger cations, such as ethylammonium, have been found to form 2D crystals with lead halide. Here we show for the first time that ethylammonium can in fact be incorporated coordinately with methylammonium in the lattice of a 3D perovskite thanks to a balance of opposite lattice distortion strains. This inclusion results in higher crystal symmetry, improved material stability, and markedly enhanced charge carrier lifetime. This crystal engineering strategy of balancing opposite lattice distortion effects vastly increases the number of potential choices of organic cations for 3D perovskites, opening up new degrees of freedom to tailor their optoelectronic and environmental properties.     

研究型综合化学实验设计:碳量子点的制备及其在叶酸检测中的应用

以高校创新型人才培养为目标,设计了一个研究型综合化学实验。以柠檬酸和尿素为原料,通过水热法制备了发射强烈蓝色荧光的碳量子点,表征了其紫外-可见吸收光谱和荧光光谱,进一步研究了该碳量子点在叶酸的检测中的应用。本实验涉及纳米材料制备、表征及应用相关知识,适合作为高年级本科生的研究型综合化学实验,有助于激发学生的研究兴趣和培养学生的科研思维。     

富镉离子CdS量子点电化学发光法检测L-半脐氨酸

采用一锅法,通过控制镉硫比合成了表面富镉离子的硫化镉量子点,利用L-半胱氨酸可与量子点表面Cd2+结合,使量子点表面钝化,从而增强其电化学发光信号的性质,实现了对L-半胱氨酸的选择性检测.对合成的量子点进行了表征,优化了检测条件.在优化的条件下,L-半胱氨酸在5.0×10-9~1.0×10-5 mol/L浓度范围内与ECL信号呈良好的线性关系,检出限为1.2×10-9 mol/L(S/N=3).本方法对L-半胱氨酸具有良好的选择性,用于实际样品中L-半胱氨酸的测定,结果令人满意.     

Characterization on Lead-Free Hybrid Perovskite [NH3(CH2)5NH3]CuCl4: Thermodynamic Properties and Molecular Dynamics

It is essential to develop novel zero- and two-dimensional hybrid perovskites to facilitate the development of eco-friendly solar cells. In this study, we investigated the structure and dynamics of [NH₃(CH₂)₅NH₃]CuCl₄ via various characterization techniques. Nuclear magnetic resonance (NMR) results indicated that the crystallographic environments of ¹H in NH₃ and ¹³C on C3, located close to NH₃ at both ends of the cation, were changed, indicating a large structural change of CuCl₆ connected to N–H···Cl. The thermal properties and structural dynamics of the [NH₃(CH₂)_nNH₃] cation in [NH₃(CH₂)_nNH₃]CuCl₄ (n = 2, 3, 4, and 5) crystals were compared using thermogravimetric analysis (TGA) and NMR results for the methylene chain. The ¹H and ¹³C spin-lattice relaxation times (T_1ρ) exhibited similar trends upon the variation of the methylene chain length, with n = 2 exhibiting shorter T_1ρ values than n = 3, 4, and 5. The difference in T_1ρ values was related to the length of the cation, and the shorter chain length (n = 2) exhibited a shorter T_1ρ owing to the one closest to the paramagnetic Cu²⁺ ions.     

CdS-ZnSe和CdSe-ZnS量子点的合成和F(o)rster能量转移研究

采用分步合成法成功合成了CdS-ZnSe(Ⅰ型)和CdSe-ZnS(Ⅱ型)核-壳结构量子点.并首次构建了CdS-ZnSe/CdSe-ZnS结构F(o)rster能量转移对.利用吸收光谱(UV-Vis),光致发光谱(PL),时间分辨光致发光谱(TRPL),透射电子显微镜(TEM)对比研究了不同配比的CdS-ZnSe/CdSe-ZnS结构Fö rster能量转移.分析结果表明:在能量转移发生时,CdS-ZnSe荧光强度显著下降,荧光寿命明显缩短,F(o)rster能量转移确实存在于CdS-ZnSe/CdSe-ZnS量子点之间.