Nickel Oxide/Graphene Composites: Synthesis and Applications

Nickel oxide (NiO) has emerged as one of the most promising transition-metal oxides (TMOs) for electrochemical capacitors, batteries, catalysis, and electrochromic films, owing to its cost-effectiveness, abundance, and well-defined electrochemical properties. Recent studies have identified that mixing NiO with graphene or graphene derivatives results in novel composites with synergistic effects and superior electrochemical performance. This review summarizes the latest advances in composites of NiO with graphene or graphene derivatives. The synthetic strategies, morphologies, and electrochemical performance of these composites are introduced, as well as their electrochemical applications in supercapacitors, batteries, sensors, catalysis, and so forth. Finally, tentative conclusions and assessments regarding the opportunities and challenges for the future development of these composites and other TMOs/graphene or graphene-derived composites are presented.     

Graphitic Carbon Nitride Nanosheet–Carbon Nanotube Three‐Dimensional Porous Composites as High‐Performance Oxygen Evolution Electrocatalysts

A new class of highly efficient oxygen evolution catalysts has been synthesized through the self‐assembly of graphitic carbon nitride nanosheets and carbon nanotubes, driven by π–π stacking and electrostatic interactions. Remarkably, the catalysts exhibit higher catalytic oxygen evolution activity and stronger durability than Ir‐based noble‐metal catalysts and display the best performance among the reported nonmetal catalysts. This good result is attributed to the high nitrogen content and the efficient mass and charge transfer in the porous three‐dimensional nanostructure.     

FeOOH/Co/FeOOH Hybrid Nanotube Arrays as High‐Performance Electrocatalysts for the Oxygen Evolution Reaction

Herein, we developed FeOOH/Co/FeOOH hybrid nanotube arrays (HNTAs) supported on Ni foams for oxygen evolution reaction (OER). The inner Co metal cores serve as highly conductive layers to provide reliable electronic transmission, and can overcome the poor electrical conductivity of FeOOH efficiently. DFT calculations demonstrate the strong electronic interactions between Co and FeOOH in the FeOOH/Co/FeOOH HNTAs, and the hybrid structure can lower the energy barriers of intermediates and thus promote the catalytic reactions. The FeOOH/Co/FeOOH HNTAs exhibit high electrocatalytic performance for OER, such as low onset potential, small Tafel slope, and excellent long‐term durability, and they are promising electrocatalysts for OER in alkaline solution.     

Postsynthetic-Modified PANI/MOF Composites with Tunable Thermoelectric and Photoelectric Properties

A 3D Co-based metal–organic framework ( Co-MOF ) with two kinds of large pores filled by free Co²⁺ ions and ligands was synthesized and characterized. To expand the MOF structure and conductivity, the free Co²⁺ ions and ligands were exchanged by conductive ionic liquid EtpyBr and photosensitive AgNO₃ through single crystal-to-single crystal transformation, which produced structure-changed 3D MOFs Co-MOF-Br and Co-Ag-MOF , which were characterized by single-crystal X-ray diffraction. Incorporating small quantities of doped polyaniline (PANI) with redox activity into the pores could further tune the stability and conductivity of the three MOFs. The PANI/MOFs all show outstanding electrical conductivity (≈10⁻² S cm⁻¹), and PANI/ Co-MOF-Br has the largest p-type Seebeck coefficient of 66.6 μV K⁻¹. PANI/ Co-MOF-Br and PANI/ Co-Ag-MOF have 4 and 15 times higher photocurrent density compared with PANI/ Co-MOF , respectively. This work sheds light on the design of advanced electrically conductive 3D MOFs.     

Polyoxometalates decorated with metal-organic moieties as new molecular photo- and electro-catalysts

Abstract

Three new polyoxometalate-based organic-inorganic hybrid compounds (POIHCs), [Cu(PBI)₂(H₂O)][{Cu(PBI)(OH)(H₂O)}{PW₁₂O₄₀}]·5H₂O (1), [Cu(PBI)₂(H₂O)][{Cu(PBI)₂(H₂O)}{SiW₁₂O₄₀}]·4H₂O (2) and [Cu₄(HPO₄)(PO₄)(H₂O)₂(PBI)₄][PMo₁₂O₄₀]·H₂O (3) (PBI =2-(pyridin-2-yl)-1H-benzo[d]imidazole), have been synthesized under hydrothermal conditions. All three compounds were characterized by elemental analysis, IR spectroscopy, thermogravimetric analysis, powder X-ray diffraction and single-crystal X-ray diffraction. In 1 and 2, the Keggin-type polyoxometalate (POM) units are decorated by the {Cu/PBI} metal-organic fragments, together with additional {Cu/PBI} isolated cations, which further stack into 3-D supramolecular frameworks with porous structural features. Compound 3 consists of a rare cationic cluster [Cu₄(HPO₄)(PO₄)(H₂O)₂(PBI)₄]³⁺ and the Keggin-type POM anion, forming a 3-D supramolecular framework with limited interspaces for the entry of guest molecules. Comparable photocatalytic properties of 1–3 were investigated by the use of methylene blue (MB) and Rhodamine B (RhB) degradation under UV light. All compounds showed good catalytic activity for the degradation of MB in contrast to RhB. The possible catalytic mechanism was discussed based on the size of dye molecules, the low adsorption ability and crystal packing mode of the as-synthesized compounds. Additionally, the electrochemical properties of 1–3 have also been investigated, exhibiting good electrocatalytic performance for nitrite reduction.     

Multifunctional Active-Center-Transferable Platinum/Lithium Cobalt Oxide Heterostructured Electrocatalysts towards Superior Water Splitting

Designing cost-effective and efficient electrocatalysts plays a pivotal role in advancing the development of electrochemical water splitting for hydrogen generation. Herein, multifunctional active-center-transferable heterostructured electrocatalysts, platinum/lithium cobalt oxide (Pt/LiCoO₂) composites with Pt nanoparticles (Pt NPs) anchored on LiCoO₂ nanosheets, are designed towards highly efficient water splitting. In this electrocatalyst system, the active center can be alternatively switched between Pt species and LiCoO₂ for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. Specifically, Pt species are the active centers and LiCoO₂ acts as the co-catalyst for HER, whereas the active center transfers to LiCoO₂ and Pt turns into the co-catalyst for OER. The unique architecture of Pt/LiCoO₂ heterostructure provides abundant interfaces with favorable electronic structure and coordination environment towards optimal adsorption behavior of reaction intermediates. The 30 % Pt/LiCoO₂ heterostructured electrocatalyst delivers low overpotentials of 61 and 285 mV to achieve 10 mA cm⁻² for HER and OER in alkaline medium, respectively.     

Rare-Earth–Transition-Metal Organic–Inorganic Hybrids Based on Keggin-type Polyoxometalates and Pyrazine-2,3-dicarboxylate

Five rare-earth–transition-metal (RE–TM) heterometal organic–inorganic hybrids based on Keggin-type silicotungstates and mixed ligands H2pzda (pzda=pyrazine-2,3-dicarboxylate) and en (en=ethylenediamine) (enH2)[Cu(en)2(H2O)]2{[Cu(en)2][Cu(en)2(H2O)][(α-SiW11 O39)RE(H2O)(pzda)]}2⋅n H2O (n≈4; RE=YIII ( 1 ), DyIII ( 2 ), YbIII ( 3 ), and LuIII ( 4 )) and [Cu(en)2(H2O)]2{[Cu(en)2]2[Cu(pzda)2][(α-H2SiW11O39)Ce(H2O)]2}⋅n H2O ( 5 ; n≈8) have been hydrothermally synthesized and structurally characterized. Compounds 1–5 all contain the dimeric mono-RE substituted Keggin [RE(α-SiW11O39)]210− subunits linked by H2pzda ligands. Interestingly, 1–4 exhibit discrete structures, in which the H2pzda ligand acts as a tetradentate ligand to bind the RE and Cu cations, whereas 5 displays a 1D double-chain architecture, in which the H2pzda ligand adopts a new pentadentate mode to connect the Ce and Cu cations. To our knowledge, 1–5 represent the first monovacant Keggin-type silicotungstates containing both RE–TM heterometals and mixed ligands. The luminescence of 2 is derived from the combination of the DyIII cations and H2pzda ligands, whereas the luminescence properties of 1 and 3–5 are attributable to the H2pzda ligands.     

PBA@POM Hybrids as Efficient Electrocatalysts for the Oxygen Evolution Reaction

To realize the effective conversion of renewable energy through water decomposition, efficient electrocatalysts for the oxygen evolution reaction (OER) are essential. In this article, PBA@POM was successfully prepared with a Prussian blue analogue (PBA) as the initial structure. A facile hydrothermal process is reported for obtaining PBA@POM by etching the cubic PBA with a strong Brønsted acid, H₃PMo₁₂O₄₀ (HPMo). The hollow cube structure not only exposes more active sites but also promotes electron transport, which results in excellent electrocatalytic activity for the OER. Compared with the PBA, which initially simply adhered to POM, the optimum PBA@POM hybrids display remarkably enhanced OER catalytic activity, with an almost constant overpotential of 440 mV at a current density of 10 mA cm^?2 and a small Tafel slope (23.45 mV dec^?1). The facilely prepared PBA@POM with good electrochemical activity and stability promises great potential for the OER.     

Multifunctional Active‐Center‐Transferable Platinum/Lithium Cobalt Oxide Heterostructured Electrocatalysts towards Superior Water Splitting

Designing cost‐effective and efficient electrocatalysts plays a pivotal role in advancing the development of electrochemical water splitting for hydrogen generation. Herein, multifunctional active‐center‐transferable heterostructured electrocatalysts, platinum/lithium cobalt oxide (Pt/LiCoO₂) composites with Pt nanoparticles (Pt NPs) anchored on LiCoO₂ nanosheets, are designed towards highly efficient water splitting. In this electrocatalyst system, the active center can be alternatively switched between Pt species and LiCoO₂ for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. Specifically, Pt species are the active centers and LiCoO₂ acts as the co‐catalyst for HER, whereas the active center transfers to LiCoO₂ and Pt turns into the co‐catalyst for OER. The unique architecture of Pt/LiCoO₂ heterostructure provides abundant interfaces with favorable electronic structure and coordination environment towards optimal adsorption behavior of reaction intermediates. The 30 % Pt/LiCoO₂ heterostructured electrocatalyst delivers low overpotentials of 61 and 285 mV to achieve 10 mA cm^?2 for HER and OER in alkaline medium, respectively.     

Evaluation of Perovskites as Electrocatalysts for the Oxygen Evolution Reaction

The oxygen evolution reaction (OER) is an enabling process for technologies in the area of energy conversion and storage, but its slow kinetics limits its efficiency. We performed an electrochemical evaluation of 14 different perovskites of variable composition and stoichiometry as OER electrocatalysts in alkaline media. We particularly focused on improved methods for a reliable comparison of catalyst activity. From initial electrochemical results we selected the most active samples for further optimization of electrode preparation and testing. An inverted cell configuration facilitated gas bubble detachment and thus minimized blockage of the active surface area. We describe parameters, such as the presence of specific cations, stoichiometry, and conductivity, that are important for obtaining electroactive perovskites for OER. Conductive additives enhanced the current and decreased the apparent overpotential of OER for one of the most active samples (La_0.58Sr_0.4Fe_0.8Co_0.2O₃).     

Recent Progress in Organic–Inorganic Composite Solid Electrolytes for All-Solid-State Lithium Batteries

Conventional lithium-ion batteries, with flammable organic liquid electrolytes, have serious safety problems, which greatly limit their application. All-solid-state batteries (ASSBs) have received extensive attention from large-scale energy-storage fields, such as electric vehicles (EVs) and intelligent power grids, due to their benefits in safety, energy density, and thermostability. As the key component of ASSBs, solid electrolytes determine the properties of ASSBs. In past decades, various kinds of solid electrolytes, such as polymers and inorganic electrolytes, have been explored. Among these candidates, organic–inorganic composite solid electrolytes (CSEs) that integrate the advantages of these two different electrolytes have been regarded as promising electrolytes for high-performance ASSBs, and extensive studies have been carried out. Herein, recent progress in organic–inorganic CSEs is summarized in terms of the inorganic component, electrochemical performance, effects of the inorganic ceramic nanostructure, and ionic conducting mechanism. Finally, the main challenges and perspectives of organic–inorganic CSEs are highlighted for future development.     

锂离子电池3d 过渡金属氧化物负极微/纳米材料

与传统的碳材料相比,锂离子电池3d 过渡金属氧化物(M_xO_y,M = Co、Fe、Cu、Ni) 负极材料具有更高的容量、倍率及安全性能,更适于锂离子电池在移动电子设备、电动汽车、备用储能和智能电网等领域的应用,因此备受关注。本文介绍了M_xO_y 负极材料的充放电机理,并以零维、一维、二维、三维等纳米结构及空心、核壳等多种微/纳米结构为出发点,详细讨论了过渡金属氧化物电极材料的电化学性能与结构特征之间的关系,分析了具有不同结构特征的负极材料的合成方法;展望了3d 过渡金属氧化物负极微/纳米材料的研究趋势和发展前景。     

Two‐Dimensional Co@N‐Carbon Nanocomposites Facilely Derived from Metal–Organic Framework Nanosheets for Efficient Bifunctional Electrocatalysis

Metal–organic frameworks (MOFs) and MOF‐derived nanomaterials have recently attracted great interest as highly efficient, non‐noble‐metal catalysts. In particular, two‐dimensional MOF nanosheet materials possess the advantages of both 2D layered nanomaterials and MOFs and are considered to be promising nanomaterials. Herein, we report a facile and scalable in situ hydrothermal synthesis of Co–hypoxanthine (HPA) MOF nanosheets, which were then directly carbonized to prepare uniform Co@N‐Carbon nanosheets for efficient bifunctional electrocatalytic hydrogen‐evolution reactions (HERs) and oxygen‐evolution reactions (OERs). The Co embedded in N‐doped carbon shows excellent and stable catalytic performance for bifunctional electrocatalytic OERs and HERs. For OERs, the overpotential of Co@N‐Carbon at 10 mA cm^?2 was 400 mV (vs. reversible hydrogen electrode, RHE). The current density of Co@N‐Carbon reached 100 mA cm^?2 at an overpotential of 560 mV, which showed much better performance than RuO₂; the largest current density of RuO₂ that could be reached was only 44 mA cm^?2. The Tafel slope of Co@N‐Carbon was 61 mV dec^?1, which is comparable to that of commercial RuO₂ (58 mV dec^?1). The excellent electrocatalytic properties can be attributed to the nanosheet structure and well‐dispersed carbon‐encapsulated Co, CoN nanoparticles, and N‐dopant sites, which provided high conductivity and a large number of accessible active sites. The results highlight the great potential of utilizing MOF nanosheet materials as promising templates for the preparation of 2D Co@N‐Carbon materials for electrocatalysis and will pave the way to the development of more efficient 2D nanomaterials for various catalytic applications.     

Robust Polyoxometalate/Nickel Foam Composite Electrodes for Sustained Electrochemical Oxygen Evolution at High pH

The development of technologically viable electrodes for the electrochemical oxygen evolution reaction (OER) is a major bottleneck in chemical energy conversion. This article describes a facile one‐step hydrothermal route to deposit microcrystals of a robust Dexter–Silverton polyoxometalate oxygen evolution catalyst, [Co_6.8Ni_1.2W₁₂O₄₂(OH)₄(H₂O)₈], on a commercial nickel foam electrode. The electrode shows efficient and sustained electrochemical oxygen evolution at low overpotentials (360 mV at 10 mA cm⁻² against RHE, Tafel slope 126 mV dec⁻¹, faradaic efficiency (96±5) %) in alkaline aqueous solution (pH 13). Post‐catalytic analyses show no mechanical or chemical degradation and no physical detachment of the microcrystals. The results provide a blueprint for the stable “wiring” of POM catalysts to commercial metal foam substrates, thus giving access to technologically relevant composite OER electrodes.     

Synthesis and Characterization of a Thermoresponsive Polyoxometalate–Polymer Hybrid

We report the synthesis of the first organo‐POM with thermoresponsive properties. Our concept will provide chemists with a new tool to design POMs whose solubility is reversibly controllable through an external stimulus. POM–polymer TBA₇[POM]‐poly(N,N‐diethylacrylamide) (POM–PDEAAm), was prepared by grafting PDEAAm‐NH₂ (obtained by RAFT polymerization) onto the activated Dawson acyl‐POM, α₂‐[P₂W₁₇O₆₁SnCH₂CH₂C(?O)]^6?. Extensive MS analysis was used to monitor the chain‐functionalization steps and to confirm the formation of the hybrid. Aqueous solutions of the (NH₄)₇[POM–PDEAAm] exhibited a LCST of 38 °C. Thus, the solubility/aggregation of the hybrid was reversibly controlled by changing the temperature. Above 38 °C, the solution became cloudy, and cleared again upon cooling. Dynamic light scattering (DLS) revealed the formation of small aggregates in the range 100 nm. We assumed that the charged POM head units prevented the formation of the larger‐scattering aggregates that are usually observed for PDEAAm, and promoted the formation of micelle‐like structures. The conjugate exhibited a temperature transition, which was different from that of the polymer and depended on the counterions associated with the POM. This result demonstrates the potential for merging organic (in this case, polymer) and inorganic structures to afford materials that exhibit new properties.     

Nickel-Based Metal-Organic Frameworks as Electrocatalysts for the Oxygen Evolution Reaction (OER)

The exploration of earth-abundant electrocatalysts with high performance for the oxygen evolution reaction (OER) is eminently desirable and remains a significant challenge. The composite of the metal-organic framework (MOF) Ni₁₀Co-BTC (BTC = 1,3,5-benzenetricarboxylate) and the highly conductive carbon material ketjenblack (KB) could be easily obtained from the MOF synthesis in the presence of KB in a one-step solvothermal reaction. The composite and the pristine MOF perform better than commercially available Ni/NiO nanoparticles under the same conditions for the OER. Activation of the nickel-cobalt clusters from the MOF can be seen under the applied anodic potential, which steadily boosts the OER performance. Ni₁₀Co-BTC and Ni₁₀Co-BTC/KB are used as sacrificial agents and undergo structural changes during electrochemical measurements, the stabilized materials show good OER performances.     

Scanning Electrochemical Cell Microscopy Investigation of Single ZIF‐Derived Nanocomposite Particles as Electrocatalysts for Oxygen Evolution in Alkaline Media

“Single entity” measurements are central for an improved understanding of the function of nanoparticle‐based electrocatalysts without interference arising from mass transfer limitations and local changes of educt concentration or the pH value. We report a scanning electrochemical cell microscopy (SECCM) investigation of zeolitic imidazolate framework (ZIF‐67)‐derived Co?N‐doped C composite particles with respect to the oxygen evolution reaction (OER). Surmounting the surface wetting issues as well as the potential drift through the use of a non‐interfering Os complex as free‐diffusing internal redox potential standard, SECCM could be successfully applied in alkaline media. SECCM mapping reveals activity differences relative to the number of particles in the wetted area of the droplet landing zone. The turnover frequency (TOF) is 0.25 to 1.5 s^?1 at potentials between 1.7 and 1.8 V vs. RHE, respectively, based on the number of Co atoms in each particle. Consistent values at locations with varying number of particles demonstrates OER performance devoid of macroscopic film effects.     

二元析氧催化剂CoxCr1-xO3/2的制备及性能研究

用热分解法制得不同混合比例的二元金属氧化物催化剂Co_xCr_1-xO_3/2（x = 0,0.2,0.4,0.6,0.8,1）,使用SEM、XRD和XPS观察表征催化剂形貌、晶型和价态,使用线性扫描伏安、阶梯波伏安和恒电位测试电极活性、过电位和稳定性. 结果表明,该Co₃O₄和绿铬矿型Cr₂O₃混合物形成固溶体Co_xCr_1-xO_3/2. x = 0.2时,Co_0.2Cr_0.8O_3/2电极性能较单一Co₃O₄和Cr₂O₃电极好,在高电位（1.0 V vs. Ag/AgCl）,其电流强度是Co₃O₄的3.75倍,Cr₂O₃的15.2倍,其过电位（η = 0.0703 V）也较Co₃O₄（η = 0.6109 V）和Cr₂O₃（η = 0.435 V）小,催化性能最好,在强碱性溶液（pH=13）中有良好的稳定性.     

Reactivity of ZrO(MFP) and ZrO(RP) Nanoparticles with LnCl3 for Solvatochromic Luminescence Modification and pH-Dependent Optical Sensing

The luminescence of the inorganic–organic hybrid nanoparticles ZrO(MFP) (MFP=methylfluorescein phosphate) and ZrO(RP) (RP=resorufin phosphate) was modified by addition of different rare earth halides LnCl₃. The resulting composite materials form dispersible nanoparticles that exhibit modified nanoparticle fluorescence depending on the rare earth ion. The resulting chromaticity of the luminescence is further variable by the employment of different solvents for ZrO(MFP)-based composite systems. The strong solvatochromic effect of the MFP chromophore leads to different luminescence chromaticities of the composite materials between green, yellow, and blue in THF, toluene, and dichloromethane, respectively. The luminescence of ZrO(RP)-based composite particles can be modified between the red and blue spectral regions in dependence on the applied reaction temperature. Beside a luminescence shift that is derived from nanoparticle modification by LnCl₃, a strong turn-on effect of ZrO(RP) particles results after contact with different Brønsted acids and bases in combination with a respective chromaticity shift. Both effects enable the potential employment of such particles as highly sensitive optical pH sensors.