Continuous flow and flow injection stripping voltammetric determination of silver(I), mercury(II), and bismuth(III) at a bulk modified graphite tube electrode

The epoxy-impregnated graphite tube electrode bulk modified with 2-mercaptobenzoxazole, employed in a wall-jet configuration, was found to be useful for the continuous flow and flow injection stripping voltammetric determinations of Ag^I, Hg^II and Bi^III. For continuous flow, detection limits for Ag^I, Hg^II and Bi^III were 1.8 × 10⁻¹⁰ M, 1.9 × 10⁻⁹ M and 9.5 × 10⁻⁹ M, respectively (10 min accumulation, S/N = 3). Precisions for 5.00 × 10⁻⁹ M Ag^I, 1.00 × 10⁻⁸ M Hg^II and 1.00 × 10⁻⁷ M Bi^III were 10.5%, 5.77 % and 7.90% (relative standard deviations, n = 6), respectively. In the case of flow injection stripping, with a 500 μL injection loop, detection limits of 0.59 ng, 2.0 ng and 120 ng were obtained for Ag^I, Hg^II and Bi^III, respectively (S/N = 3). Selected metal ions, inorganic and organic substances were investigated for interferences. The electrode was tested with a certified sample and then applied to the determinations of the metal ions in a urine and a sea-water sample.     

Novel Designing of Chemically Modified Electrode (CME) of the Bio-MOF-1 for the Detection of Dopamine Based on Inhibition of [Ru(bpy)3]2+/DBAE System

Metal organic frameworks (MOFs) have attracted extensive attention in electrochemical research fields due to their high surface area and controlled porosity. Current study is design to investigate the ECL performance of the chemically modified electrode (CME) based on the bio-MOF-1, a porous zinc-adenine framework, which loaded ruthenium complex and employed for the detection of dopamine (DA). The composite material [Ru(bpy)₃]²⁺@bio-MOF-1 (Ru-bMOF) modified carbon glassy electrode (Ru-bMOF/GCE) exhibited an excellent ECL performance having a linear co-efficient response (R²=0.9968) for 2-(dibutyl amino) ethanol (DBAE), a classical ECL co-reactant was obtained over a concentration range of 1.0×10⁻⁹ M to 1.0×10⁻⁴ M in 0.10 M pH=6.0 phosphate buffer solution (PBS). Furthermore, DA was detected based on its inhibition effect on [Ru(bpy)₃]²⁺/DBAE system. Compared to traditional analytical methods, this method has various advantages such as simple electrode preparation, quick response, high reproducibility (RSD<2.0 %), low limit of detection (LOD=1.0×10⁻¹⁰ mol/L). This chemical investigated modified electrode had exploited potential for detection of DA.     

A Newly Competitive Electrochemical Sensor for Sensitive Determination of Chrysin Based on Electrochemically Activated Ta2O5 Particles Modified Carbon Paste Electrode

A novel electrochemically activated doped Ta₂O₅ particles modified carbon paste electrode (EA‐Ta₂O₅‐CPE) was prepared and applied for selective and sensitive determination of chrysin. X‐ray diffraction (XRD), scanning electron microscopy (SEM), electrochemical impedance spectroscopy (EIS) techniques and cyclic voltammetry (CV) were used to characterize the Ta₂O₅ particles and investigate the electrochemical response of the sensor. Compared with bare CPE, the doped Ta₂O₅ modified electrode got much more porous by electrochemical treatment and exhibited larger effective surface area, more reactive site and excellent electrochemical catalytic activity toward the oxidation of chrysin. Under optimum conditions by LSV, the oxidation peak currents responded to chrysin linearly over a concentration range from 5.0×10⁻⁸ to 7.0×10⁻⁶ mol L⁻¹ with a detection limit of 2.0×10⁻⁸ mol L⁻¹ (5.08 ng mL⁻¹). The fabricated sensor showed anti‐interference ability against the biological common interferents (i.e. baicalein, baicalin) and provided to be reliable for the determination of chrysin in Chinese medicinal herb Oroxylum indicum and chrysin capsules samples with satisfactory results.     

An inorganic-organic hybrid material from the co-intercalation of a cationic surfactant and thiourea within montmorillonite layers: application to the sensitive stripping voltammetric detection of Pb2+ and Cd2+ ions

A smectite-based inorganic-organic hybrid material was prepared by a one-step intercalation of cetyltrimethylammonium ions and thiourea within the interlayer space of montmorillonite (MT). The surface and textural properties of the resulting material were examined using several techniques (X-ray diffraction, elementary analysis and N₂ adsorption-desorption experiments (BET method)) that demonstrated the presence of both modifiers in the clay mineral structure. The presence of thiourea molecules in the modified MT greatly improved its ability towards the fixation of Pb²⁺ and Cd²⁺ ions when the organoclay material was used for sensing purposes as a glassy carbon electrode modifier. The electro-analytical procedure was based on the chemical accumulation of both analytes under open-circuit conditions, followed by the detection of the preconcentrated species using square wave voltammetry. Upon optimization of different parameters likely to influence the electrode response, linear calibration graphs were obtained in the concentration ranges from 0.1 to 1 μM and 0.01 to 0.1 μM for Cd²⁺ and Pb²⁺, respectively, leading to low limits of detection (4.2 × 10⁻¹⁰ M for Pb²⁺and 1.2 × 10⁻⁹ M for Cd²⁺).     

The Electropolymerization of 2,6‐Diaminopyridine and Its Application as Mercury Ion Selective Electrode

A composite graphite (CG) electrode modified with poly(2,6‐diaminopyridine) (PDAP) was used as solid state‐ion selective electrode for determination of mercury. The electrooxidation of monomer 2, 6 diaminopyridine (DAP) onto CG was accomplished from the 30 mM DAP in 5% H₂SO₄ and 0.5 M ZnSO₄. The electrode displayed Nernstian response with slope of 28.4±1 mV decade⁻¹ in concentration range of 1×10⁻⁶ to 1×10⁻¹ M and in solution of pH 3–5. The limit of detection for electrode was 3×10⁻⁸ M with response time of 25 s. The electrode was also suitable as an indicator electrode in the potentiometric titration of Hg²⁺ with iodide.     

Determination of hydrogen peroxide by utilizing a cobalt(II)hexacyanoferrate-modified glassy carbon electrode as a chemical sensor

A mixed-valence cluster of cobalt(II)hexacyanoferrate possesses an electron transfer property and is suitable for the development of an effective hydrogen peroxide detection scheme. The characteristics of cobalt(II)hexacyanoferrate have been studied using both elemental analysis and infrared spectra, confirming the structure is Co[Fe^II(CN)₆]. The cobalt(II)hexacyanoferrate-modified electrode exhibits a rapid response (t_95% - 6.5 s) to the injection of 5.0 × 10⁻⁵ M hydrogen peroxide. The linearity of the response is up to 1.1 × 10⁻³ M (correlation coefficients is 0.999). The sensitivity of this modified electrode is 11.8 μA/mM-mm². The detection limit of cobalt(II)hexacyanoferrate-modified electrode to hydrogen peroxide is 6.25 × 10⁻⁸ M. The current chemical sensor modified with Co[Fe^II(CN)₆] has better sensitivity than previous ones. The modified glassy carbon electrode shows no interference from ascorbic acid, uric acid, acetaminophen, 1,4-dihydroxyquinone, dopamine at the 2.0 × 10⁻⁴ M level and polyamines at 5.0 × 10⁻⁵ M level.     

Coordination-Induced N−H Bond Splitting of Ammonia and Primary Amine of CuI−MOFs

We report a porous three-dimensional anionic tetrazolium based Cu^I−MOF 1 , which is capable of cleaving the N−H bond of ammonia and primary amine, as well as the O−H bond of H₂O along with spontaneous H₂ evolution. In the gas-solid phase reaction of 1 with ammonia and water vapor, Cu^I−MOF 1 was gradually oxidized to NH₂−Cu^II−MOF and OH−Cu^II−MOF, through single-crystal-to-single-crystal (SCSC) structural transformations, which was confirmed by XPS, PXRD and X-ray single-crystal diffraction. Density functional theory (DFT) demonstrated that Cu^I−MOF could lower N−H bond dissociation free energy of ammonia through coordination-induced bond weakening and promote H₂ evolution by the reduction potential of 1 . To our knowledge, this is the first example of MOFs that activate ammonia and amine in gas-solid manner.     

A Lead‐Selective Membrane Electrode Based Upon a Phosphorylated Hexahomotrioxacalix[3]Arene

Solvent extraction of a mixture of Pb^II, Mn^II, Fe^III, Co^II, Ni^II and Cd^II in aqueous perchlorate medium by a phosphorylated hexahomotrioxacalix[3]arene (calix‐3) in dichloromethane shows a significant selectivity towards lead ions. The ligand can also be incorporated into a membrane to provide a new lead ion‐selective electrode (Pb^II‐ISE). A plasticized PVC membrane containing 30% PVC, 53.5% ortho‐nitrophenyloctylether (NPOE), 4.5% sodium tetraphenylborate (NaTPB) and 12% ionophore was directly coated on a graphite rod. This sensor gave a good Nernstian response of 29.7 ± 0.7 mV decade^?1 over a concentration range of 1 × 10^?8 – 1 × 10^?4 M of lead ions, independent of pH in the range 3‐7, with a detection limit of 0.4 × 10^?8 M. The dynamic response time of the electrode to achieve a steady potential was very fast and found to be less than 7 s. The selectivity relative to Ag⁺, NH₄⁺, Li⁺, Na⁺, K⁺, Ca²⁺, Sr²⁺, Ba²⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Fe³⁺, La³⁺, Sm³⁺, Dy³⁺, Er³⁺, Y³⁺ and Th⁴⁺ was examined. The electrode exhibits adequate stability with good reproducibility (with a slope of 29.6 ± 1.5 mV for 8 weeks). The characteristics of the sensor are compared with those of a tetraphosphorylated calix[4]arene (calix‐4) based Pb^II‐ISE, reported recently. The electrode was successfully used as an indicator electrode for a potentiometric titration of a lead solution using a standard solution of EDTA. The applicability of the sensor for lead ion measurements in various synthetic samples was also investigated.     

A lvt‐type Framework [Cu2(tza)4]·ClO4·4H2O Derived from 1H‐tetrazole‐1‐acetic Acid

The reaction of 1H‐tetrazole‐1‐acetic acid (Htza) and perchloric acid with cuprous chloride with slow evaporation at room temperature gave a novel 3D porous Cu^II coordination polymer, [Cu₂(tza)₄] · ClO₄ · 4H₂O ( 1 ), (tza = tetrazole‐1‐acetate). The structure exhibits an unusual 3D microporous coordination framework built up by four coordinated Cu^II nodes and bidentate bridging tza ligands with lvt‐type topology. Furthermore, the magnetic properties of complex 1 were also investigated.     

Quantitative Analysis of Holmium Ion by a Ho3+ Ion‐Selective Sensor Based on a Symmetric Thio‐Schiff's Base

A poly(vinyl chloride) (PVC) membrane sensor for holmium ions was fabricated based on N‐[(Z)‐1‐(2‐thienyl)‐ methylidene]‐N‐[4‐(4‐{[(Z)‐1‐(2‐thienyl)methylidene]amino} phenoxy)phenyl] amine (TPA) as a new ion carrier, acetophenon (AP) as plasticizing solvent mediator and sodium tetraphenyl borate (NaTPB) as an anion excluder. The electrode shows a good selectivity towards Ho³⁺ ions respect to other inorganic cations, including alkali, alkaline earth, transition and heavy metal ions. The constructed sensor displays a Nernstian behavior (19.5±0.3 mV/decade) over the concentration range of 1.0×10⁻⁶ to 1.0×10⁻² mol·L⁻¹ with the detection limit of the electrode being 4.6×10⁻⁷ mol·L⁻¹ and very short response time (ca. 5 s). It has a useful working pH range of 3.2–9.8 for at least 8 weeks. The electrode was successfully applied as an indicator electrode for the potentiometric titration of a Ho³⁺ solution with EDTA and holmium determination in some alloys. The proposed sensor accuracy was studied by the determination of Ho³⁺ in mixtures of three different ions.     

Praseodymium Doped Dysprosium Oxide-carbon Nanofibers Based Voltammetric Platform for the Simultaneous Determination of Sunset Yellow and Tartrazine

A platform based on praseodymium doped dysprosium oxide-carbon nanofibers modified electrode was constructed for the simultaneous determination of SY and TAR. SEM, EDX and XRD techniques were utilized for characterizing the proposed material. The voltammetric behaviour and properties of SY and TAR were gradually improved at materials in order from CNFs to Dy₂O₃−CNFs and Pr₆O₁₁@Dy₂O₃−CNFs. The working range was found to be 1.0×10⁻⁹–3.5×10⁻⁸ M and 1.5×10⁻⁹–4.0×10⁻⁸ M for SY and TAR, respectively. The value of LOD was 3.12×10⁻¹⁰ M and 5.35×10⁻¹⁰ M for SY and TAR, respectively. The platform (Pr₆O₁₁@Dy₂O₃−CNFs/GCE) was successfully applied to the electroanalysis of samples.     

Square Wave‐Anodic Stripping Voltammetric Determination of Copper at a Bismuth Film/Glassy Carbon Electrode Using 3‐[(2‐Mercapto‐Vinyl)‐Hydrazono]‐ 1,3‐Dihydro‐Indol‐2‐One

This study reports a highly sensitive electrochemical sensor based on Bi film modified glassy carbon electrode (BiF/GCE) for total determination and speciation trace concentrations of copper(II) ions in environmental water samples. Square wave‐adsorptive anodic stripping voltammetric (SW‐ASV) experiment was performed for monitoring selective accumulation of copper(II) with reagent 3‐[(2‐mercapto‐vinyl)‐hydrazono]‐1,3‐dihydro‐indol‐2‐one (MHDI) at pH 9–10. The mechanism of the electrode reaction of Cu²⁺‐MHDI complex was safely assigned. The sensor exhibited a wide linear range (3.22×10⁻⁹–2.0×10⁻⁷ mol L⁻¹) with lower limits of detection (LOD) and quantitation (LOQ) of 9.6×1⁻¹⁰ and 3.22×10⁻⁹ mol L⁻¹, respectively (R²=0.9993). The proposed sensor exhibited interference from active metal ions e. g. Cd, Hg. The performance of the proposed method was compared successfully with most of the reported methods and comparable efficiencies were obtained. The analytical utility of the proposed SW‐ASV method has been successfully validated for trace analysis of copper(II) in environmental water samples. The method offers a precise, accurate approach with good reproducibility, robustness, ruggedness, and cost effectiveness.     

Tapioca Biofilm Containing Nitrogen‐doped Titanium Dioxide Nanoparticles for Electrochemical Detection of 17‐β Estradiol

A novel sensor architecture based on thin film of tapioca decorated within nitrogen‐doped titanium dioxide (N‐TiO₂) nanoparticles is reported. The nanostructures were characterized by scanning electron microscope, transmission electron microscope, X‐rays diffraction and voltammetric techniques. The proposed electrode was used for detection of low concentrations of 17‐β estradiol in without purification step, which was investigated by using linear sweep adsorptive stripping voltammetry. Under optimal conditions, the analytical curve was linear over a 17β‐estradiol concentration range of 9.9×10⁻⁶ to 1.4×10⁻⁵ mol L⁻¹, with a detection limit of 1.7×10⁻⁷ mol L⁻¹. The tapioca and N‐TiO₂ nanoparticles homogeneous film was applied for detection of 17‐β‐estradiol in tap water and synthetic urine samples, which presented satisfactory results.     

Electrochemically Deposited Porous Graphene−Polypyrrole−Polyphenol Oxidase for Dopamine Biosensor

We report a method for the fabrication of glassy carbon electrode modified porous graphene-polypyrrole-polyphenol oxidase (GCE−PG−PPy−PPO) modified electrode for the determination dopamine. The optimization of pH, concentration and detection limit of dopamine was employed by amperomatric technique. The detection limit of dopamine was found to be in a linear range of 2×10⁻⁸ to 4.6×10⁻⁵ M and lower limit detection is 4×10⁻⁹ M. Michealis – Menten constant (Km) and the activation energy were calculated as 31.32 μM and 37.4−Kj mol⁻¹, respectively. The developed biosensor was used to quantify the dopamine in human urine sample.     

Electrochemical Selective Determination of Uranyl Ions Using PVC Membrane Sensor

A UO₂²⁺‐PVC membrane electrode was constructed using 2‐thenoyltrifluoroacetone as ionophore and its electrochemical response performance was characterized. The effect of membrane composition on the electrode performance was studied and best results were obtained using dioctylsebacate as a mediator and potassium tetrakis(4‐chlorophenyl)borate as anion excluder. The optimized UO₂²⁺‐sensor exhibited a Nernstian response with a slope of 29.5±0.5 mV decade⁻¹ over the concentration range 5.0×10⁻⁷−1.0×10⁻¹ mol L⁻¹ at 25 °C with a detection limit of 3.1×10⁻⁷ mol L⁻¹. The optimized electrode showed very good selectivity towards UO₂²⁺ relative to a wide variety of other cations and fast response time. Surface morphology of the optimized membrane electrode at different stages of its development and use was investigated and discussed. Quantum chemical calculations for geometrical optimization of the ionophore were carried out to investigate the interaction between the ionophore and UO₂²⁺ using DFT B3LYP/6‐31++G(d,p) level of theory and the obtained data confirmed the proposed response mechanism. The developed sensor was successfully applied for UO₂²⁺ selective determination in real water samples and the obtained results were compared to those obtained by spectrophotometric method indicating no significant difference.     

Determination of Cu2+ in Drinking Water Based on Electrochemiluminescence of Ru(phen)32+ and Cyclam

A convenient and simple electrochemiluminescence (ECL) method was employed to detect trace amounts of Cu²⁺ in drinking water. This method is based on the inhibitory effect of Cu²⁺ on the ECL of Ru(phen)₃²⁺ and 1,4,8,11‐tetraazacyclotetradecane (cyclam) system. ECL intensity of Ru(phen)₃²⁺ was considerably enhanced by the addition of cyclam because of the ECL reaction between them. The ECL intensity of Ru(phen)₃²⁺/cyclam system rapidy decreased with the addition Cu²⁺ because of the formation of chelate complex [Cu(cyclam)]²⁺. Good linear response (R ²=0.9948) was obtained at Cu²⁺ concentration of 1.0×10⁻⁹−1.0×10⁻⁵ mol ⋅ L⁻¹ at glassy carbon electrode in 0.1 mol ⋅ L⁻¹ phosphate buffer (pH 9.0). Observed detection limit of 4.8×10⁻¹⁰ mol ⋅ L⁻¹ satisfied the maximum contaminant level goal (MCLG) for Cu²⁺ set by the US Environmental Protection Agency (US EPA). Applicability of the proposed method was verified by the good reproducibility and stability of the method when applied to determine Cu²⁺ in tap water and simulated wastewater. Thus, a novel ECL detection method was developed for Cu²⁺ detection.     

Novel Potentiometric Solid-contact Electrode for the Determination of Fe2+ Ions via MWCNTs-Gemifloxacin Composite

A novel electrode was fabricated for the quantitation of Fe²⁺ ion. It was based on the covalent attachment of the gemifloxacin molecule (the recognition element) to the surface of MWCNTs to be incorporated as an electroactive material. Linear response of Fe²⁺ ions was found in the concentration range of 1×10⁻² mol L⁻¹ to 1×10⁻⁸ mol L⁻¹ with a Nernstian slope of 30.37 ±0.3 (mV/decade) and attained a stable response within 5 s. The sensor exhibited LOD value of 4.8×10⁻⁹ mol L⁻¹. It was applied in the monitoring of Fe²⁺ concentration in multi-vitamins tablets, tap water and milk samples with acceptable recovery ranged from 94.00 % to 102.00 %.     

Graphdiyne and Ionic Liquid Composite Modified Gold Electrode for Sensitive Voltammetric Analysis of Rutin

It is significant to develop a point-of-care testing (POCT) method for rapid detection of medicinal molecules. In this paper, a graphdiyne (GDY)-ionic liquid (IL) composite was prepared via one-step facile ultrasound preparation process and then modified on gold (Au) electrode surface by simple casting method. Scanning electron microscopy and transmission electron microscopy were used to characterize the morphology of GDY-IL composite. Cyclic voltammetric results proved that GDY-IL composite on the electrode surface could effectively improve electron transfer rate, which meant that GDY-IL composite had high conductivity with big surface area. Finally, the modified electrode exhibited excellent performances for rutin detection with wider linear range (8.0×10⁻⁹ mol L⁻¹–2.0×10⁻⁶ mol L⁻¹ and 2.0×10⁻⁶ mol L⁻¹–1.5×10⁻⁴ mol L⁻¹) and lower detection limit (2.7 nmol L⁻¹, 3S₀/S). The Nafion/GDY-IL/Au electrode showed good sensitivity and high selectivity, which was satisfactory in analytical application to real samples. Therefore, the GDY-IL composite modified electrode has the potential applications in the POCT for electrochemical analysis of various medicinal molecules.     

Post-Nickelation of a Crystalline Trinuclear Copper Organic Framework for Synergistic Photocatalytic Carbon Dioxide Conversion

Rational regulation of electronic structures and functionalities of framework materials still remains challenging. Herein, reaction of 4,4′,4′′-nitrilo-tribenzhydrazide with tris(μ₂-4-carboxaldehyde-pyrazolato-N,N′)-tricopper (Cu₃Py₃) generates the crystalline copper organic framework USTB-11(Cu). Post-modification with divalent nickel ions affords the heterometallic framework USTB-11(Cu,Ni). Powder X-ray diffraction and theoretical simulations reveal their two-dimensional hexagonal structure geometry. A series of advanced spectroscopic techniques disclose the mixed Cu^I/Cu^II state nature of Cu₃Py₃ in USTB-11(Cu,Ni) with a uniform bistable Cu₃⁴⁺(Cu^I₂Cu^II) : Cu₃⁵⁺(Cu^ICu^II₂) (ca. 1 : 3) oxidation state, resulting in a significantly improved formation efficiency of the charge-separation state. This endows the Ni sites with enhanced activity and USTB-11(Cu,Ni) with outstanding photocatalytic CO₂ to CO performance with a conversion rate of 22 130 μmol g⁻¹ h⁻¹ and selectivity of 98 %.     

Hybrid graphene oxide/DAB-Am-16 dendrimer: Preparation,characterization chemical reactivity and their electrocatalytic detection of l-Dopamine

Graphene oxide (GO) was chemically modified with a poly(propylene)imine Generation 3.0 dendrimer (DAB-Am-16). The characterization, structure and properties of hybrid graphene oxide/DAB-Am-16 dendrimer was studied by Raman spectroscopy, Fourier-Transforming Infrared Spectroscopy (FT-IR), X-Ray Photoelectron Spectroscopic (XPS), X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and Thermogravimetric analysis. After functionalized the hybrid material (GOD) can interact with copper and subsequently with hexacyanoferrate (III) ions (GODHCu). The GODHCu incorporated into a graphite paste electrode (20% w/w) was applied to an electrocatalytic detection of neurotransmitter l-dopamine using differential pulse voltammetry. The analytical curve showed a linear response in the concentration range from 1.0 × 10⁻⁷ to 1.0 × 10⁻⁵ mol L⁻¹ with a corresponding equation Y(A) = 1.706 × 10⁻⁵ + 0.862 [l-dopamine] and a correlation coefficient r² = 0.998. The detection limit was 6.36 × 10⁻⁷ mol L⁻¹ with a relative standard deviation of ±4% (n = 3) and an amperometric sensitivity of 0.862 A/mol L⁻¹.