One-Step Synthesis of NiFe Layered Double Hydroxide Nanosheet Array/N-Doped Graphite Foam Electrodes for Oxygen Evolution Reactions

Developing cost-effective and highly efficient oxygen evolution reaction (OER) electrocatalysts is vital for the production of clean hydrogen by electrocatalytic water splitting. Here, three dimensional nickel-iron layered double hydroxide (NiFe LDH) nanosheet arrays are in-situ fabricated on self-supporting nitrogen doped graphited foam (NGF) via a one-step hydrothermal process under an optimized amount of urea. The as prepared NiFe LDH/NGF electrode exhibits a remarkable activity toward OER with a low onset overpotential of 233 mV and a Tafel slope of 59.4 mV dec⁻¹ as well as a long-term durability. Such good performance is attributed to the synergy among the doping effect, the binder-free characteristic, and the architecture of the nanosheet array.     

Heterostructures of NiFe LDH hierarchically assembled on MoS2 nanosheets as high-efficiency electrocatalysts for overall water splitting

Typically, rational interfacial engineering can effectively modify the adsorption energy of active hydrogen molecules to improve water splitting efficiency. NiFe layered double hydroxide (NiFe LDH) composite, an efficient oxygen evolution reaction (OER) catalyst, suffers from slow hydrogen evolution reaction (HER) kinetics, restricting its application for overall water splitting. Herein, we construct the hierarchical MoS₂/NiFe LDH nanosheets with a heterogeneous interface used for HER and OER. Benefiting the hierarchical heterogeneous interface optimized hydrogen Gibbs free energy, tens of exposed active sites, rapid mass- and charge-transfer processes, the MoS₂/NiFe LDH displays a highly efficient synergistic electrocatalytic effect. The MoS₂/NiFe LDH electrode in 1 mol/L KOH exhibits excellent HER activity, only 98 mV overpotential at 10 mA/cm². Significantly, when it assembled as anode and cathode for overall water splitting, only 1.61 V cell voltage was required to achieve 10 mA/cm² with excellent durability (50 h).     

Boosting the electrocatalytic performance of NiFe layered double hydroxides for the oxygen evolution reaction by exposing the highly active edge plane (012)

The intrinsic activity of NiFe layer double hydroxides (LDHs) for the oxygen evolution reaction (OER) suffers from its predominantly exposed (003) basal plane, which is thought to have poor activity. Herein, we construct a hierarchal structure of NiFe LDH nanosheet-arrays-on-microplates (NiFe NSAs-MPs) to elevate the electrocatalytic activity of NiFe LDHs for the OER by exposing a high-activity plane, such as the (012) edge plane. It is surprising that the NiFe NSAs-MPs show activity of 100 mA cm⁻² at an overpotential (η) of 250 mV, which is five times higher than that of (003) plane-dominated NiFe LDH microsheet arrays (NiFe MSAs) at the same η, representing the excellent electrocatalytic activity for the OER in alkaline media. Besides, we analyzed the OER activities of the (003) basal plane and the (012) and (110) edge planes of NiFe LDHs by density functional theory with on-site Coulomb interactions (DFT+U), and the calculation results indicated that the (012) edge plane exhibits the best catalytic performance among the various crystal planes because of the oxygen coordination of the Fe site, which is responsible for the high catalytic activity of NiFe NSAs-MPs.

The (012) edge plane of NiFe layer double hydroxides (LDHs) has been proven to be a highly active plane for water oxidation.     

High-Performance Alkaline Seawater Electrolysis with Anomalous Chloride Promoted Oxygen Evolution Reaction

A highly selective and durable oxygen evolution reaction (OER) electrocatalyst is the bottleneck for direct seawater splitting because of side reactions primarily caused by chloride ions (Cl⁻). Most studies about OER catalysts in seawater focus on the repulsion of the Cl⁻ to reduce its negative effects. Herein, we demonstrate that the absorption of Cl⁻ on the specific site of a popular OER electrocatalyst, nickel-iron layered double hydroxide (NiFe LDH), does not have a significant negative impact; rather, it is beneficial for its activity and stability enhancement in natural seawater. A set of in situ characterization techniques reveals that the adsorption of Cl⁻ on the desired Fe site suppresses Fe leaching, and creates more OER-active Ni sites, improving the catalyst's long-term stability and activity simultaneously. Therefore, we achieve direct alkaline seawater electrolysis for the very first time on a commercial-scale alkaline electrolyser (AE, 120 cm² electrode area) using the NiFe LDH anode. The new alkaline seawater electrolyser exhibits a reduction in electricity consumption by 20.7 % compared to the alkaline purified water-based AE using commercial Ni catalyst, achieving excellent durability for 100 h at 200 mA cm⁻².     

Hierarchical Hollow Nanoprisms Based on Ultrathin Ni‐Fe Layered Double Hydroxide Nanosheets with Enhanced Electrocatalytic Activity towards Oxygen Evolution

The oxygen evolution reaction (OER) is involved in various renewable energy systems, such as water‐splitting cells and metal–air batteries. Ni‐Fe layered double hydroxides (LDHs) have been reported as promising OER electrocatalysts in alkaline electrolytes. The rational design of advanced nanostructures for Ni‐Fe LDHs is highly desirable to optimize their electrocatalytic performance. Herein, we report a facile self‐templated strategy for the synthesis of novel hierarchical hollow nanoprisms composed of ultrathin Ni‐Fe LDH nanosheets. Tetragonal nanoprisms of nickel precursors were first synthesized as the self‐sacrificing template. Afterwards, these Ni precursors were consumed during the hydrolysis of iron(II) sulfate for the simultaneous growth of a layer of Ni‐Fe LDH nanosheets on the surface. The resultant Ni‐Fe LDH hollow prisms with large surface areas manifest high electrocatalytic activity towards the OER with low overpotential, small Tafel slope, and remarkable stability.     

NiFe_2O_4/NiO纳米复合材料的制备及电催化水氧化性能

以镍铁水滑石为单一前驱体,通过高温焙烧制备了NiFe_2O_4/NiO纳米复合材料,对该纳米复合材料在碱性介质中电催化水的氧化性能进行了研究.结果表明,相比于化学共沉淀法制备的单独NiFe_2O_4、NiO及其物理混合物NiFe_2O_4+NiO,NiFe_2O_4/NiO纳米复合材料具有更高的电催化水氧化活性和更好的循环稳定性.电流密度为10 m A/cm2时过电位仅为364 m V.     

Facile one-step synthesis of Ru doped NiCoP nanoparticles as highly efficient electrocatalysts for oxygen evolution reaction

Transition metal phosphides (TMPs) as ever-evolving electrocatalytic materials have attracted increasing attention in water splitting reactions owing to their cost-effective, highly active and stable catalytic properties. This work presents a facile synthetic route to NiCoP nanoparticles with Ru dopants which function as highly efficient electrocatalysts for oxygen evolution reaction (OER) in alkaline media. The Ru dopants induced a high content of Ni and Co vacancies in NiCoP nanoparticles, and the more defective Ru doped NiCoP phase than undoped NiCoP ones led to a greater number of catalytically active sites and improved electrical conductivity after undergoing electrochemical activation. The Ru doped NiCoP catalyst exhibited high OER catalytic performance in alkaline media with a low overpotential of 281 mV at 10 mA cm⁻² and a Tafel slope of 42.7 mV dec⁻¹.     

NiFe Hydroxide Lattice Tensile Strain: Enhancement of Adsorption of Oxygenated Intermediates for Efficient Water Oxidation Catalysis

The binding strength of reactive intermediates with catalytically active sites plays a crucial role in governing catalytic performance of electrocatalysts. NiFe hydroxide offers efficient oxygen evolution reaction (OER) catalysis in alkaline electrolyte, however weak binding of oxygenated intermediates on NiFe hydroxide still badly limits its catalytic activity. Now, a facile ball‐milling method was developed to enhance binding strength of NiFe hydroxide to oxygenated intermediates via generating tensile strain, which reduced the anti‐bonding filling states in the d orbital and thus facilitated oxygenated intermediates adsorption. The NiFe hydroxide with tensile strain increasing after ball‐milling exhibits an OER onset potential as low as 1.44 V (vs. reversible hydrogen electrode) and requires only a 270 mV overpotential to reach a water oxidation current density of 10 mA cm^?2.     

Engineering Lithium Ions Embedded in NiFe Layered Double Hydroxide Lattices To Activate Laminated Ni2+ Sites as High-Efficiency Oxygen Evolution Reaction Catalysts

NiFe layered double hydroxides (LDHs) have been denoted as benchmark non-noble-metal electrocatalysts for the oxygen evolution reaction (OER). However, for laminates of NiFe LDHs, the edge sites are active, but the basal plane is inert, leading to underutilization as catalysts for the OER. Herein, for the first time, light and electron-deficient Li ions are intercalated into the basal plane of NiFe LDHs. The results of theoretical calculations and experiments both showed that electrons would be transferred from near Ni²⁺ to the surroundings of Li⁺, resulting in electron-deficient properties of the Ni sites, which would function as “electron-hungry” sites, to enhance surface adsorption of electron-rich oxygen-containing groups, which would enhance the effective activity for the OER. As demonstrated by the catalytic performance, the Li−NiFe LDH electrodes showed an ultralow overpotential of only 298 mV at 50 mA cm⁻², which was lower than that of 347 mV for initial NiFe LDHs and lower than that of 373 mV for RuO₂. Reasonable intercalation adjustment effectively activates laminated Ni²⁺ sites and constructs the electron-deficient structure to enhance its electrocatalytic activity, which sheds light on the functional treatment of catalytic materials.     

Preferential Cation Vacancies in Perovskite Hydroxide for the Oxygen Evolution Reaction

The oxygen evolution reaction (OER) is an ideal model to study the relationship between the activity and the surface properties of catalysts. Defect engineering has been extensively developed to tune the electrocatalytic activity for OER. Compared to the anion vacancies in metal oxides, cation vacancies are more challenging to selectively generate, and the insight into the structure and activity of cation vacancies‐rich catalysts are lacked. Herein, using SnCoFe perovskite hydroxide as a precursor, abundant Sn vacancies on the surface were preferentially produced by Ar plasma. Sn vacancies could be preferentially produced as confirmed by the X‐ray absorption spectra, probably owing to the lower lattice energy and weaker chemical bonds of Sn(OH)₄. The Sn vacancies promoted the exposure of active CoFe sites, resulting in an amorphous surface layer, modulated the conductivity, and thus enhanced the OER performance.     

Carbon‐Incorporated Nickel–Cobalt Mixed Metal Phosphide Nanoboxes with Enhanced Electrocatalytic Activity for Oxygen Evolution

Hollow nanostructures have attracted increasing research interest in electrochemical energy storage and conversion owing to their unique structural features. However, the synthesis of hollow nanostructured metal phosphides, especially nonspherical hollow nanostructures, is rarely reported. Herein, we develop a metal–organic framework (MOF)‐based strategy to synthesize carbon incorporated Ni–Co mixed metal phosphide nanoboxes (denoted as NiCoP/C). The oxygen evolution reaction (OER) is selected as a demonstration to investigate the electrochemical performance of the NiCoP/C nanoboxes. For comparison, Ni–Co layered double hydroxide (Ni–Co LDH) and Ni–Co mixed metal phosphide (denoted as NiCoP) nanoboxes have also been synthesized. Benefiting from their structural and compositional merits, the as‐synthesized NiCoP/C nanoboxes exhibit excellent electrocatalytic activity and long‐term stability for OER.     

FeOOH/Co/FeOOH Hybrid Nanotube Arrays as High‐Performance Electrocatalysts for the Oxygen Evolution Reaction

Herein, we developed FeOOH/Co/FeOOH hybrid nanotube arrays (HNTAs) supported on Ni foams for oxygen evolution reaction (OER). The inner Co metal cores serve as highly conductive layers to provide reliable electronic transmission, and can overcome the poor electrical conductivity of FeOOH efficiently. DFT calculations demonstrate the strong electronic interactions between Co and FeOOH in the FeOOH/Co/FeOOH HNTAs, and the hybrid structure can lower the energy barriers of intermediates and thus promote the catalytic reactions. The FeOOH/Co/FeOOH HNTAs exhibit high electrocatalytic performance for OER, such as low onset potential, small Tafel slope, and excellent long‐term durability, and they are promising electrocatalysts for OER in alkaline solution.     

NiFe水滑石纳米片阵列负载Ru用于提升碱性电催化析氢和析氧性能

通过离子交换的方式将Ru负载到NiFe水滑石(LDH)纳米阵列表面得到(Ru/NiFe LDH),Ru的引入显著提升了NiFe LDH的活性比表面积,暴露了更多的活性位点,同时调控了其电子结构,大大提升了其本征催化活性。在碱性条件下,催化析氢反应时仅需50 mV的过电位即可达到10 mA·cm^-2的电流密度,Tafel斜率为52.3 mV·dec^-1。而相同条件下原始NiFe LDH达到10mA·cm^-2的电流密度则需要226 mV的过电位,Tafel斜率为157.5 mV·dec^-1。同时制备的Ru/NiFe LDH也展现出了良好的析氧催化活性,在50 mA·cm^-2的电流密度下,过电位仅为231 mV,而NiFe LDH则需237 mV。Ru/NiFe LDH在长时间的电催化条件下依然能保持良好的工作稳定性。     

泡沫镍铁合金自支撑NiFeOOH纳米片的制备及析氧性能研究

电催化析氧反应(OER)是电解水制氢的重要半电池反应。然而,OER的缓慢动力学仍需研究高效的电催化剂。在非贵金属催化剂中,NiFe基材料是OER催化剂研究热点。本文通过食人鱼溶液简单一步浸渍刻蚀法将不同Fe含量的泡沫NiFe合金进行氧化,制备了表面具有纳米片形貌的NiFeOOH自支撑电催化剂,并深入研究其电催化析氧性能。通过SEM、XRD、XPS等对电催化剂的形貌结构及成分进行表征,证实了三维多孔基底上NiFeOOH纳米片结构的形成。由于高价镍、铁物种的存在以及二维纳米片结构的生成,NiFeOOH/NF的析氧性能大幅度提高,在10 mA?cm-2的电流密度下过电位仅155.68 mV,Tafel斜率为 88.2 mV?dec-1。这为研制高效、耐用的自支撑非贵金属电极提供了新思路。     

Improving the Catalytic Efficiency of NiFe-LDH/ATO by Air Plasma Treatment for Oxygen Evolution Reaction

Developing efficient catalysts toward the oxygen evolution reaction(OER)is important for water splitting and rechargeable metal-air batteries.Although NiFe oxides are considered as potentially applicable catalysts in the alkaline media,there are still a limited numbers of researches working on membrane electrode assembly(MEA)fed with pure water due to their poor electrical conductivity.In this work,antimony doped tin oxide(ATO)has been employed as conductive supports where NiFe layered double hydroxide uniformly dispersed[named NiFe-LDH(layered double hydroxide)/ATO].The catalysts have been synthesized by a one-step co-precipitation method,and then NiFe-LDH/ATO-air plasma was obtained through mild air plasma treatment.According to XPS analysis,binding energies of Ni2p and Fe2p were shifted negatively.Moreover,a new signal of low oxygen coordination appeared on O1s spectrum after air plasma treatment.These XPS results indicated that oxygen vacancies(Ov)were generated after air plasma treatment.Electrochemical measurement indicated that the vacancy-rich NiFe-LDH/ATO-air plasma exhibited better performance than NiFe-LDH/ATO not only in 1 mol/L KOH solutions but also in an alkaline polymer electrolyte water electrolyzer(APEWE)fed with deionized water.This work provides a feasible way to design practical catalysts used in electrochemical energy conversion systems by choosing corrosion resistance supports and defect engineering.     

A Strongly Coupled Graphene and FeNi Double Hydroxide Hybrid as an Excellent Electrocatalyst for the Oxygen Evolution Reaction

Cost‐effective electrocatalysts for the oxygen evolution reaction (OER) are critical to energy conversion and storage processes. A novel strategy is used to synthesize a non‐noble‐metal‐based electrocatalyst of the OER by finely combining layered FeNi double hydroxide that is catalytically active and electric conducting graphene sheets, taking advantage of the electrostatic attraction between the two positively charged nanosheets. The synergy between the catalytic activity of the double hydroxide and the enhanced electron transport arising from the graphene resulted in superior electrocatalytic properties of the FeNi‐GO hybrids for the OER with overpotentials as low as 0.21 V, which was further reduced to 0.195 V after the reduction treatment. Moreover, the turnover frequency at the overpotential of 0.3 V has reached 1 s^?1, which is much higher than those previously reported for non‐noble‐metal‐based electrocatalysts.     

Energy-efficient hydrogen production coupled with methanol oxidation using NiFe LDH@NiMo alloy heterostructure

The traditional electrochemical water splitting is extremely restricted by the sluggish kinetics of the anodic oxygen evolution reaction (OER). In this context, replacing OER with a more thermodynamic favorable oxidation reaction, such as methanol oxidation reaction (MOR), is an effective strategy to improve the hydrogen evolution reaction (HER) efficiency while still obtaining some valuable by-products. In this work, nickel-iron layered double-hydroxide [NiFe LDH]@NiMo alloy heterostructure is synthesized by electrodeposition process and its bi-functional electrocatalytic activities for both hydrogen evolution reaction (HER) and methanol oxidation reaction (MOR) are evaluated. For the HER, the catalyst exhibits low overpotential of 82.5 mV at 100 mA/cm², with a Tafel slope of 61 mV/dec as well as splendid long-term stability. For the MOR, the required potential decreases by 74 mV at 100 mA/cm² compared to oxygen evolution reaction (OER). Moreover, 97% process yields toward value-added formic acid (HCOOH) are obtained at the anode, with a faradaic efficiency of approximately 100% for HER at the cathode. The superior catalytic performance results from the synergic contribution of NiFe LDH and NiMo alloy. The formation of NiFe LDH@NiMo alloy heterostructure leads to the redistribution of electrons among nickel (Ni), iron (Fe) and molybdenum (Mo) elements. Therefore, the charge transfer process has been greatly promoted. This study provides a scalable energy saving strategy for hydrogen energy development.     

NiFe水滑石纳米片阵列负载Ru用于提升碱性电催化析氢和析氧性能

通过离子交换的方式将Ru负载到NiFe水滑石（LDH）纳米阵列表面得到（Ru/NiFe LDH），Ru的引入显著提升了NiFe LDH的活性比表面积，暴露了更多的活性位点，同时调控了其电子结构，大大提升了其本征催化活性。在碱性条件下，催化析氢反应时仅需50 mV的过电位即可达到10 mA·cm^-2的电流密度，Tafel斜率为52.3 mV·dec^-1。而相同条件下原始NiFe LDH达到10mA·cm^-2的电流密度则需要226 mV的过电位，Tafel斜率为157.5 mV·dec^-1。同时制备的Ru/NiFe LDH也展现出了良好的析氧催化活性，在50 mA·cm^-2的电流密度下，过电位仅为231 mV，而NiFe LDH则需237 mV。Ru/NiFe LDH在长时间的电催化条件下依然能保持良好的工作稳定性。     

NiFe Alloy Nanoparticles with hcp Crystal Structure Stimulate Superior Oxygen Evolution Reaction Electrocatalytic Activity

Tuning the crystal phase of metal alloy nanomaterials has been proved a significant way to alter their catalytic properties based on crystal structure and electronic property. Herein, we successfully developed a simple strategy to controllably synthesize a rare crystal structure of hexagonal close‐packed (hcp) NiFe nanoparticle (NP) encapsulated in a N‐doped carbon (NC) shell (hcp‐NiFe@NC). Then, we systemically investigated the oxygen evolution reaction (OER) performance of the samples under alkaline conditions, in which the hcp‐NiFe@NC exhibits superior OER activity compared to the conventional face‐centered cubic (fcc) NiFe encapsulated in a N‐doped carbon shell (fcc‐NiFe@NC). At the current densities of 10 and 100 mA cm^?2, the hcp‐NiFe@NC with Fe/Ni ratio of ≈5.4 % only needs ultralow overpotentials of 226 mV and 263 mV versus reversible hydrogen electrode in 1.0 m KOH electrolyte, respectively, which were extremely lower than those of fcc‐NiFe@NC and most of other reported NiFe‐based electrocatalysts. We proposed that hcp‐NiFe possesses favorable electronic property to expedite the reaction on the NC surface, resulting higher catalytic activity for OER. This research provides a new insight to design more efficient electrocatalysts by considering the crystal phase correlated electronic property.     

Deciphering Iron-Dependent Activity in Oxygen Evolution Catalyzed by Nickel–Iron Layered Double Hydroxide

Nickel iron oxyhydroxide is the benchmark catalyst for the oxygen evolution reaction (OER) in alkaline medium. Whereas the presence of Fe ions is essential to the high activity, the functions of Fe are currently under debate. Using oxygen isotope labeling and operando Raman spectroscopic experiments, we obtain turnover frequencies (TOFs) of both Ni and Fe sites for a series of Ni and NiFe layered double hydroxides (LDHs), which are structurally defined samples of the corresponding oxyhydroxides. The Fe sites have TOFs 20–200 times higher than the Ni sites such that at an Fe content of 4.7 % and above the Fe sites dominate the catalysis. Higher Fe contents lead to larger structural disorder of the NiOOH host. A volcano-type correlation was found between the TOFs of Fe sites and the structural disorder of NiOOH. Our work elucidates the origin of the Fe-dependent activity of NiFe LDH, and suggests structural ordering as a strategy to improve OER catalysts.