On the Entangled Growth of NaTaO3 Cubes and Na2Ti3O7 Wires in Sodium Hydroxide Solution

The entangled growth of sodium titanate Na₂Ti₃O₇ nanowires and sodium tantalate NaTaO₃ cubes was investigated with electron microscopy, X‐ray diffraction, and UV diffuse reflectance spectroscopy. Depending on the composition of the Ta₂O₅‐ and TiO₂‐particle‐based powder mixtures, which served as educts, we observed different types of hybridization effects. These include the titanium‐induced contraction of the NaTaO₃ perovskite‐type unit cell and the generation of electronic defect states in NaTaO₃ that give rise to optical subbandgap transitions and tantalum‐induced limitations of the Na₂Ti₃O₇ nanowire growth. The transformation from Ta₂O₅ to NaTaO₃ occurs through a dissolution–recrystallization process. A systematic analysis of the impact of different titanium sources on NaTaO₃ dispersion and, thus, on the properties of the entangled nanostructures revealed that a perfect intermixture of cubes and nanowires can only be achieved when titanate nanosheets emerge during transformation as reaction intermediates and shield nucleation and growth of isolated NaTaO₃ cubes. The here demonstrated approach can be highly instrumental for understanding the nucleation and growth of composite and entangled nanostructures in solution and—at the same time—provides an interesting new class of photoactive composite materials.     

Designed One-Pot Strategy for Dual-Carbon-Protected Na3V2(PO4)3 Hybrid Structure as High-Rate and Ultrastable Cathode for Sodium-Ion Batteries

Sodium-ion batteries have attracted tremendous attention due to their much lower cost and similar working principle compared with lithium-ion batteries, which have been invited great expectation as energy storage devices in grid-level applications. The sodium superionic conductor Na₃V₂(PO₄)₃ has been considered as a promising cathode candidate; however, its intrinsic low electronic conductivity results in poor rate performance and unsatisfactory cycling performance, which severely impedes its potential for practical applications. Herein, we developed a facile one-pot strategy to construct dual carbon-protected hybrid structure composed of carbon coated Na₃V₂(PO₄)₃ nanoparticles embedded with carbon matrix with excellent rate performance, superior cycling stability and ultralong lifespan. Specifically, it can deliver an outstanding rate performance with a 51.5 % capacity retention from 0.5 to 100 C and extraordinary cycling stability of 80.86 % capacity retention after 6000 cycles at the high rate of 20 C. The possible reasons for the enhanced performance could be understood as the synergistic effects of the strengthened robust structure, facilitated charge transfer kinetics, and the mesoporous nature of the Na₃V₂(PO₄)₃ hybrid structure. This work provides a cost-effective strategy to effectively optimize the electrochemical performance of a Na₃V₂(PO₄)₃ cathode, which could contribute to push forward the advance of its practical applications.     

Nanowire of WP as a High-Performance Anode Material for Sodium-Ion Batteries

The design and development of electrode materials with high specific capacity and long cycling life for sodium-ion batteries (SIBs) is still a critical challenge. In this communication, we report the development of tungsten phosphide (WP) nanowire on carbon cloth (WP/CC) as an anode for SIBs. The WP/CC exhibits superior sodium storage capability with 502 mA h g⁻¹ at 0.1 A g⁻¹. Moreover, this anode is capable of delivering a long lifespan at 2 A g⁻¹ with an excellent capacity retention of 99 % after 1000 cycles.     

Surface Engineering Strategy Using Urea To Improve the Rate Performance of Na2Ti3O7 in Na-Ion Batteries

Na₂Ti₃O₇ (NTO) is considered a promising anode material for Na-ion batteries due to its layered structure with an open framework and low and safe average operating voltage of 0.3 V vs. Na⁺/Na. However, its poor electronic conductivity needs to be addressed to make this material attractive for practical applications among other anode choices. Here, we report a safe, controllable and affordable method using urea that significantly improves the rate performance of NTO by producing surface defects such as oxygen vacancies and hydroxyl groups, and the secondary phase Na₂Ti₆O₁₃. The enhanced electrochemical performance agrees with the higher Na⁺ ion diffusion coefficient, higher charge carrier density and reduced bandgap observed in these samples, without the need of nanosizing and/or complex synthetic strategies. A comprehensive study using a combination of diffraction, microscopic, spectroscopic and electrochemical techniques supported by computational studies based on DFT calculations, was carried out to understand the effects of this treatment on the surface, chemistry and electronic and charge storage properties of NTO. This study underscores the benefits of using urea as a strategy for enhancing the charge storage properties of NTO and thus, unfolding the potential of this material in practical energy storage applications.     

Electrochemical Properties and Sodium‐Storage Mechanism of Ag2Mo2O7 as the Anode Material for Sodium‐Ion Batteries

Silver molybdate, Ag₂Mo₂O₇, has been prepared by a conventional solid‐state reaction. Its electrochemical properties as an anode material for sodium‐ion batteries (SIBs) have been comprehensively examined by means of galvanostatic charge–discharge cycling, cyclic voltammetry, and rate performance measurements. At operating voltages between 3.0 and 0.01 V, the electrode delivered a reversible capacity of nearly 190 mA h g^?1 at a current density of 20 mA g^?1 after 70 cycles. Ag₂Mo₂O₇ also demonstrated a good rate capability and long‐term cycle stability, the capacity reaching almost 100 mA h g^?1 at a current density of 500 mA g^?1, with a capacity retention of 55 % over 1000 cycles. Moreover, the sodium storage process of Ag₂Mo₂O₇ has been investigated by means of ex situ XRD, Raman spectroscopy, and HRTEM. Interestingly, the anode decomposes into Ag metal and Na₂MoO₄ during the initial discharge process, and then Na⁺ ions are considered to be inserted into/extracted from the Na₂MoO₄ lattice in the subsequent cycles governed by an intercalation/deintercalation mechanism. Ex situ HRTEM images revealed that Ag metal not only remains unchanged during the sodiation/desodiation processes, but is well dispersed throughout the amorphous matrix, thereby greatly improving the electronic conductivity of the working electrode. The “in situ” decomposition behavior of Ag₂Mo₂O₇ is distinct from that of chemically synthesized, metal‐nanoparticle‐coated electrode materials, and provides strong supplementary insight into the mechanism of such new anode materials for SIBs and may set a precedent for the design of further materials.     

Suppressing the P2–O2 Phase Transition of Na0.67Mn0.67Ni0.33O2 by Magnesium Substitution for Improved Sodium‐Ion Batteries

Room‐temperature sodium‐ion batteries (SIBs) have shown great promise in grid‐scale energy storage, portable electronics, and electric vehicles because of the abundance of low‐cost sodium. Sodium‐based layered oxides with a P2‐type layered framework have been considered as one of the most promising cathode materials for SIBs. However, they suffer from the undesired P2–O2 phase transition, which leads to rapid capacity decay and limited reversible capacities. Herein, we show that this problem can be significantly mitigated by substituting some of the nickel ions with magnesium to obtain Na_0.67Mn_0.67Ni_0.33?xMg_xO₂ (0≤x≤0.33). Both the reversible capacity and the capacity retention of the P2‐type cathode material were remarkably improved as the P2–O2 phase transition was thus suppressed during cycling. This strategy might also be applicable to the modulation of the physical and chemical properties of layered oxides and provides new insight into the rational design of high‐capacity and highly stable cathode materials for SIBs.     

Synthesis of Porous Ni-Doped CoSe2/C Nanospheres towards High-Rate and Long-Term Sodium-Ion Half/Full Batteries

Carbon-layer-coated porous Ni-doped CoSe₂ (Ni-CoSe₂/C) nanospheres have been fabricated by a facile hydrothermal method followed by a new selenization strategy. The porous structure of Ni-CoSe₂/C is formed by the aggregation of many small particles (20–40 nm), which are not tightly packed together, but are interspersed with gaps. Moreover, the surfaces of these small particles are covered with a thin carbon layer. Ni-CoSe₂/C delivers superior rate performance (314.0 mA h g⁻¹ at 20 A g⁻¹), ultra-long cycle life (316.1 mA h g⁻¹ at 10 A g⁻¹ after 8000 cycles), and excellent full-cell performance (208.3 mA h g⁻¹ at 0.5 A g⁻¹ after 70 cycles) when used as an anode material for half/full sodium-ion batteries. The Na storage mechanism and kinetics have been confirmed by ex situ X-ray diffraction analysis, assessment of capacitance performance, and a galvanostatic intermittent titration technique (GITT). GITT shows that Na⁺ diffusion in the electrode material is a dynamic change process, which is associated with a phase transition during charge and discharge. The excellent electrochemical performance suggests that the porous Ni-CoSe₂/C nanospheres have great potential to serve as an electrode material for sodium-ion batteries.     

A Facile Route to Synthesize Sheet-like Na2Ti3O7 with Improved Sodium Storage Properties

A high purity sheet-like Na₂Ti₃O₇ material was synthesized by a new facile solid-state method with hollow sphere TiO₂ as titanium source. X^-Ray diffraction(XRD) measurement proves that no impurity phase existed when the sample was heated at 900 ℃. Charge/discharge measurement was performed in a potential range of 0.01-2.5 V at different current-rates(C-rates). The initial charge/discharge capacities are 191/424 mA·h/g at 0.1 C and still remain as high as 101 mA·h/g after 50 cycles. CV test proves that the large irreversible capacity in the initial cycle results from the formation of the solid electrolyte interface(SEI). However, the electrode presents an increased initial coulombic efficiency in a 1 mol/L NaPF₆ electrolyte compared to that in a 1 mol/L NaClO₄ electrolyte.     

The Synthesis of Porous Na3V2(PO4)3 for Sodium-Ion Storage

Na₃V₂(PO₄)₃ (NVP) has been regarded as a potential cathode material for sodium-ion batteries (SIBs) due to its excellent structural stability and rapid Na⁺ conductivity. However, its electrochemical performances are restricted by the large bulk structure and poor electronic conductivity. The construction of porous NVP materials is a powerful method to improve the electrochemical properties. This concept aims to provide an overview of recent progress of porous NVP materials for SIBs. Herein, the synthetic strategies and formation mechanisms of porous NVP materials as well as the relationship between the porous structures and electrochemical performances of NVP materials are reviewed. Furthermore, the challenges and prospects for the preparation of porous NVP materials in this field are outlined.     

Identifying the Structural Evolution of the Sodium Ion Battery Na2FePO4F Cathode

Na₂FePO₄F is a promising cathode material for Na‐ion batteries owing to its relatively high discharge voltage and excellent cycling performance. Now, the long‐ and short‐range structural evolution of Na₂FePO₄F during cycling is studied by in situ high‐energy X‐ray diffraction (XRD), ex situ solid‐state nuclear magnetic resonance (NMR), and first‐principles DFT calculations. DFT calculations suggest that the intermediate phase, Na_1.5FePO₄F, adopts the space group of P2₁/c, which is a subgroup (P2₁/b11, No. 14) of Pbcn (No. 60), the space group of the starting phase, Na₂FePO₄F, and this space group provides a good fit to the experimental XRD and NMR results. The two crystallographically unique Na sites in the structure of Na₂FePO₄F behave differently during cycling, where the Na ions on the Na2 site are electrochemically active while those on the Na1 site are inert. This study determines the structural evolution and the electrochemical reaction mechanisms of Na₂FePO₄F in a Na‐ion battery.     

Biomimetic Straw-Like Bundle Cobalt-Doped Fe2O3 Electrodes towards Superior Lithium-Ion Storage

Biomimetic straw-like bundles of Co-doped Fe₂O₃ (SCF), with Co²⁺ incorporated into the lattice of α-Fe₂O₃, was fabricated through a cost-effective hydrothermal process and used as the anode material for lithium-ion batteries (LIBs). The SCF exhibited ultrahigh initial discharge specific capacity (1760.7 mA h⁻¹ g⁻¹ at 200 mA g⁻¹) and cycling stability (with the capacity retention of 1268.3 mA h⁻¹ g⁻¹ after 350 cycles at 200 mA g⁻¹). In addition, a superior rate capacity of 376.1 mA h⁻¹ g⁻¹ was obtained at a high current density of 4000 mA g⁻¹. The remarkable electrochemical lithium storage of SCF is attributed to the Co-doping, which increases the unit cell volume and affects the whole structure. It makes the Li⁺ insertion–extraction process more flexible. Meanwhile, the distinctive straw-like bundle structure can accelerate Li ion diffusion and alleviate the huge volume expansion upon cycling.     

Synthesis of 2D/2D Structured Mesoporous Co3O4 Nanosheet/N‐Doped Reduced Graphene Oxide Composites as a Highly Stable Negative Electrode for Lithium Battery Applications

Mesoporous Co₃O₄ nanosheets (Co₃O₄‐NS) and nitrogen‐doped reduced graphene oxide (N‐rGO) are synthesized by a facile hydrothermal approach, and the N‐rGO/Co₃O₄‐NS composite is formulated through an infiltration procedure. Eventually, the obtained composites are subjected to various characterization techniques, such as XRD, Raman spectroscopy, surface area analysis, X‐ray photoelectron spectroscopy (XPS), and TEM. The lithium‐storage properties of N‐rGO/Co₃O₄‐NS composites are evaluated in a half‐cell assembly to ascertain their suitability as a negative electrode for lithium‐ion battery applications. The 2D/2D nanostructured mesoporous N‐rGO/Co₃O₄‐NS composite delivered a reversible capacity of about 1305 and 1501 mAh g^?1 at a current density of 80 mA g^?1 for the 1st and 50th cycles, respectively. Furthermore, excellent cyclability, rate capability, and capacity retention characteristics are noted for the N‐rGO/Co₃O₄‐NS composite. This improved performance is mainly related to the existence of mesoporosity and a sheet‐like 2D hierarchical morphology, which translates into extra space for lithium storage and a reduced electron pathway. Also, the presence of N‐rGO and carbon shells in Co₃O₄‐NS should not be excluded from such exceptional performance, which serves as a reliable conductive channel for electrons and act as synergistically to accommodate volume expansion upon redox reactions. Ex‐situ TEM, impedance spectroscopy, and XPS, are also conducted to corroborate the significance of the 2D morphology towards sustained lithium storage.     

Toward Understanding the Enhanced Pseudocapacitive Storage in 3D SnS/MXene Architectures Enabled by Engineered Surface Reactions

The optimization of three-dimensional (3D) MXene-based electrodes with desired electrochemical performances is highly demanded. Here, a precursor-guided strategy is reported for fabricating the 3D SnS/MXene architecture with tiny SnS nanocrystals (≈5 nm in size) covalently decorated on the wrinkled Ti₃C₂T_x nanosheets through Ti−S bonds (denoted as SnS/Ti₃C₂T_x-O). The formation of Ti−S bonds between SnS and Ti₃C₂T_x was confirmed by extended X-ray absorption fine structure (EXAFS). Rather than bulky SnS plates decorated on Ti₃C₂T_x (SnS/Ti₃C₂T_x-H) by one-step hydrothermal sulfidation followed by post annealing, this SnS/Ti₃C₂T_x-O presents size-dependent structural and dynamic properties. The as-formed 3D hierarchical structure can provide short ion-diffusion pathways and electron transport distances because of the more accessible surface sites. In addition, benefiting from the tiny SnS nanocrystals that can effectively improve Na⁺ diffusion and suppress structural variation upon charge/discharge processes, the as-obtained SnS/Ti₃C₂T_x-O can generate pseudocapacitance-dominated storage behavior enabled by engineered surface reactions. As predicted, this electrode exhibits an enhanced Na storage capacity of 565 mAh g⁻¹ at 0.1 A g⁻¹ after 75 cycles, outperforming SnS/Ti₃C₂T_x-H (336 mAh g⁻¹), SnS (212 mAh g⁻¹), and Ti₃C₂T_x (104 mAh g⁻¹) electrodes.     

One‐Pot Synthesis of CoSex–rGO Composite Powders by Spray Pyrolysis and Their Application as Anode Material for Sodium‐Ion Batteries

A simple one‐pot synthesis of metal selenide/reduced graphene oxide (rGO) composite powders for application as anode materials in sodium‐ion batteries was developed. The detailed mechanism of formation of the CoSe_x–rGO composite powders that were selected as the first target material in the spray pyrolysis process was studied. The crumple‐structured CoSe_x–rGO composite powders prepared by spray pyrolysis at 800 °C had a crystal structure consisting mainly of Co_0.85Se with a minor phase of CoSe₂. The bare CoSe_x powders prepared for comparison had a spherical shape and hollow structure. The discharge capacities of the CoSe_x–rGO composite and bare CoSe_x powders in the 50th cycle at a constant current density of 0.3 A g^?1 were 420 and 215 mA h g^?1, respectively, and their capacity retentions measured from the second cycle were 80 and 46 %, respectively. The high structural stability of the CoSe_x–rGO composite powders for repeated sodium‐ion charge and discharge processes resulted in superior sodium‐ion storage properties compared to those of the bare CoSe_x powders.     

Sodium and Manganese Stoichiometry of P2‐Type Na2/3MnO2

To realize a reversible solid‐state Mn^III/IV redox couple in layered oxides, co‐operative Jahn–Teller distortion (CJTD) of six‐coordinate Mn^III (t_2g³–e_g¹) is a key factor in terms of structural and physical properties. We develop a single‐phase synthesis route for two polymorphs, namely distorted and undistorted P2‐type Na_2/3MnO₂ having different Mn stoichiometry, and investigate how the structural and stoichiometric difference influences electrochemical reaction. The distorted Na_2/3MnO₂ delivers 216 mAh g^?1 as a 3 V class positive electrode, reaching 590 Wh (kg oxide)^?1 with excellent cycle stability in a non‐aqueous Na cell and demonstrates better electrochemical behavior compared to undistorted Na_2/3MnO₂. Furthermore, reversible phase transitions correlated with CJTD are found upon (de)sodiation for distorted Na_2/3MnO₂, providing a new insight into utilization of the Mn^III/IV redox couple for positive electrodes of Na‐ion batteries.     

One‐Pot Fabrication of Hierarchical Nanosheet‐Based TiO2–Carbon Hollow Microspheres for Anode Materials of High‐Rate Lithium‐Ion Batteries

Hierarchical and hollow nanostructures have recently attracted considerable attention because of their fantastic architectures and tunable property for facile lithium ion insertion and good cycling stability. In this study, a one‐pot and unusual carving protocol is demonstrated for engineering hollow structures with a porous shell. Hierarchical TiO₂ hollow spheres with nanosheet‐assembled shells (TiO₂ NHS) were synthesized by the sequestration between the titanium source and 2,2′‐bipyridine‐5,5′‐dicarboxylic acid, and kinetically controlled etching in trifluoroacetic acid medium. In addition, annealing such porous nanostructures presents the advantage of imparting carbon‐doped functional performance to its counterpart under different atmospheres. Such highly porous structures endow very large specifics surface area of 404 m² g^?1 and 336 m² g^?1 for the as‐prepared and calcination under nitrogen gas. C/TiO₂ NHS has high capacity of 204 mA h g^?1 at 1 C and a reversible capacity of 105 mA h g^?1 at a high rate of 20 C, and exhibits good cycling stability and superior rate capability as an anode material for lithium‐ion batteries.     

Assembly of Na3V2(PO4)3 Nanoparticles Confined in a One‐Dimensional Carbon Sheath for Enhanced Sodium‐Ion Cathode Properties

Structural and morphological control is an effective approach for improvement of electrochemical properties in rechargeable batteries. One‐dimensionally assembled structure composed of NASICON‐type Na₃V₂(PO₄)₃ nanoparticles were fabricated through an electrospinning method to meet the requirements for the development of efficient electrode materials in Na‐ion batteries. High‐temperature treatment of electrospun precursor fibers under an argon flow provides a nonwoven fabric of nanowires comprising crystallographically oriented nanoparticles of NASICON‐type Na₃V₂(PO₄)₃ within a carbon sheath. The mesostructure comprising NASICON‐type Na₃V₂(PO₄)₃ and carbon give a short sodium‐ion transport pass and an efficient electron conduction pass. Electrochemical properties of NASICON‐type Na₃V₂(PO₄)₃ are improved on the basis of one‐dimensional nanostructures designed in the present study.     

Synthesis of Copper‐Substituted CoS2@CuxS Double‐Shelled Nanoboxes by Sequential Ion Exchange for Efficient Sodium Storage

The construction of hybrid architectures for electrode materials has been demonstrated as an efficient strategy to boost sodium‐storage properties because of the synergetic effect of each component. However, the fabrication of hybrid nanostructures with a rational structure and desired composition for effective sodium storage is still challenging. In this study, an integrated nanostructure composed of copper‐substituted CoS₂@Cu_xS double‐shelled nanoboxes (denoted as Cu‐CoS₂@Cu_xS DSNBs) was synthesized through a rational metal–organic framework (MOF)‐based templating strategy. The unique shell configuration and complex composition endow the Cu‐CoS₂@Cu_xS DSNBs with enhanced electrochemical performance in terms of superior rate capability and stable cyclability.     

Electrocatalytic Deuteration of Halides with D2O as the Deuterium Source over a Copper Nanowire Arrays Cathode

Precise deuterium incorporation with controllable deuterated sites is extremely desirable. Here, a facile and efficient electrocatalytic deuterodehalogenation of halides using D₂O as the deuteration reagent and copper nanowire arrays (Cu NWAs) electrochemically formed in situ as the cathode was demonstrated. A cross-coupling of carbon and deuterium free radicals might be involved for this ipso-selective deuteration. This method exhibited excellent chemoselectivity and high compatibility with the easily reducible functional groups (C=C, C≡C, C=O, C=N, C≡N). The C−H to C−D transformations were achieved with high yields and deuterium ratios through a one-pot halogenation–deuterodehalogenation process. Efficient deuteration of less-active bromide substrates, specific deuterium incorporation into top-selling pharmaceuticals, and oxidant-free paired anodic synthesis of high-value chemicals with low energy input highlighted the potential practicality.     

Wintersweet‐Flower‐Like CoFe2O4/MWCNTs Hybrid Material for High‐Capacity Reversible Lithium Storage

CoFe₂O₄/multiwalled carbon nanotubes (MWCNTs) hybrid materials were synthesized by a hydrothermal method. Field emission scanning electron microscopy and transmission electron microscopy analysis confirmed the morphology of the as‐prepared hybrid material resembling wintersweet flower “buds on branches”, in which CoFe₂O₄ nanoclusters, consisting of nanocrystals with a size of 5–10 nm, are anchored along carbon nanotubes. When applied as an anode material in lithium ion batteries, the CoFe₂O₄/MWCNTs hybrid material exhibited a high performance for reversible lithium storage. In particular, the hybrid anode material delivered reversible lithium storage capacities of 809, 765, 539, and 359 mA h g^?1 at current densities of 180, 450, 900, and 1800 mA g^?1, respectively. The superior performance of CoFe₂O₄/MWCNTs hybrid materials could be ascribed to the synergistic pinning effect of the wintersweet‐flower‐like nanoarchitecture. This strategy could also be applied to synthesize other metal oxide/CNTs hybrid materials as high‐capacity anode materials for lithium ion batteries.