Highly Luminescent Cesium Lead Halide Perovskite Nanocrystals with Tunable Composition and Thickness by Ultrasonication

We describe the simple, scalable, single‐step, and polar‐solvent‐free synthesis of high‐quality colloidal CsPbX₃ (X=Cl, Br, and I) perovskite nanocrystals (NCs) with tunable halide ion composition and thickness by direct ultrasonication of the corresponding precursor solutions in the presence of organic capping molecules. High angle annular dark field scanning transmission electron microscopy (HAADF‐STEM) revealed the cubic crystal structure and surface termination of the NCs with atomic resolution. The NCs exhibit high photoluminescence quantum yields, narrow emission line widths, and considerable air stability. Furthermore, we investigated the quantum size effects in CsPbBr₃ and CsPbI₃ nanoplatelets by tuning their thickness down to only three to six monolayers. The high quality of the prepared NCs (CsPbBr₃) was confirmed by amplified spontaneous emission with low thresholds. The versatility of this synthesis approach was demonstrated by synthesizing different perovskite NCs.     

Completely Amine-Free Open-Atmospheric Synthesis of High-Quality Cesium Lead Bromide (CsPbBr3) Perovskite Nanocrystals

Cesium lead halide perovskite nanocrystals (NCs) CsPbX₃ (X=Cl, Br, and I) have been prominent materials in the last few years due to their high photoluminescence quantum yield (PLQY) for light-emitting diodes and other significant applications in photovoltaics and optoelectronics. In colloidal CsPbX₃ synthesis, the most commonly used ligands are oleic acid and oleylamine. The latter plays an important role in surface passivation but may also be responsible for poor colloidal stability as a result of facile proton exchange leading to the formation of labile oleylammonium halide, which pulls halide ions out of the NC surface. Herein, a facile, efficient, completely amine-free synthesis of cesium lead bromide perovskite nanocrystals using hydrobromic acid as halide source and tri-n-octylphosphane as ligand under open-atmospheric conditions is demonstrated. Hydrobromic acid serves as labile source of bromide ion, and thus this three-precursor approach (separate precursors for Cs, Pb, Br) gives more control than a conventional single-source precursor for Pb and Br (PbBr₂). The use of HBr paved the way to eliminate oleylamine, and thus the formation of labile oleylammonium halide can be completely excluded. Various Cs:Pb:Br molar ratios were studied and optimum conditions for making very stable CsPbBr₃ NCs with high PLQY were found. These completely amine-free CsPbBr₃ perovskite NCs synthesized under bromine-rich conditions exhibit good stability and durability for more than three months in the form of colloidal solutions and films, respectively. Furthermore, stable tunable emission across a wide spectral range through anion exchange was demonstrated. More importantly, this work reports open-atmosphere-stable CsPbBr₃ NCs films exhibiting strong PL, which can be further used for optoelectronic device applications.     

Composition‐Dependent Hot Carrier Relaxation Dynamics in Cesium Lead Halide (CsPbX3, X=Br and I) Perovskite Nanocrystals

Cesium‐based perovskite nanocrystals (NCs) have outstanding photophysical properties improving the performances of lighting devices. Fundamental studies on excitonic properties and hot‐carrier dynamics in perovskite NCs further suggest that these materials show higher efficiencies compared to the bulk form of perovskites. However, the relaxation rates and pathways of hot‐carriers are still being elucidated. By using ultrafast transient spectroscopy and calculating electronic band structures, we investigated the dependence of halide in Cs‐based perovskite (CsPbX₃ with X=Br, I, or their mixtures) NCs on the hot‐carrier relaxation processes. All samples exhibit ultrafast (<0.6 ps) hot‐carrier relaxation dynamics with following order: CsPbBr₃ (310 fs)>CsPbBr_1.5I_1.5 (380 fs)>CsPbI₃ NC (580 fs). These result accounts for a reduced light emission efficiency of CsPbI₃ NC compared to CsPbBr₃ NC.     

Luminescent Thin Films Enabled by CsPbX3 (X=Cl,Br, I) Precursor Solution

Inorganic cesium lead halide perovskite nanocrystals are candidates for lighting and display materials due to their outstanding optoelectronic properties. However, the dissolution issue of perovskite nanocrystals in polar solvents remains a challenge for practical applications. Herein, we present a newly designed one-step spin-coating strategy to prepare a novel multicolor-tunable CsPbX₃ (X=Cl, Br, I) nanocrystal film, where the CsPbX₃ precursor solution was formed by dissolving PbO, Cs₂CO₃, and CH₃NH₃X into the ionic liquid n-butylammonium butyrate. The as-designed CsPbX₃ nanocrystal films show high color purity with a narrow emission width. Also, the blue CsPb(Cl/Br)₃ film demonstrates an absolute photoluminescence quantum yields (PLQY) of 15.6 %, which is higher than 11.7 % of green CsPbBr₃ and 8.3 % of red CsPb(Br/I)₃ film. This study develops an effective approach to preparing CsPbX₃ nanocrystal thin films, opening a new avenue to design perovskite nanocrystals-based devices for lighting and display applications.     

Hydrochromic CsPbBr3 Nanocrystals for Anti‐Counterfeiting

Hydrochromic materials that can reversibly change color upon water treatment have attracted much attention owing to their potential applications in diverse fields. Herein, for the first time, we report that space‐confined CsPbBr₃ nanocrystals (NCs) are hydrochromic. When CsPbBr₃ NCs are loaded into a porous matrix, reversible transition between luminescent CsPbBr₃ and non‐luminescent CsPb₂Br₅ can be achieved upon the exposure/removal of water. The potential applications of hydrochromic CsPbBr₃ NCs in anti‐counterfeiting are demonstrated by using CsPbBr₃ NCs@mesoporous silica nanospheres (around 100 nm) as the starting material. Owing to the small particle size and negatively charged surface, the as‐prepared particles can be laser‐jet printed with high precision and high speed. We demonstrate the excellent stability over repeated transformation cycles without color fade. This new discovery may not only deepen the understanding of CsPbX₃, but also open a new way to design CsPbX₃ materials for new applications.     

Hydrochromic CsPbBr3 Nanocrystals for Anti-Counterfeiting

Hydrochromic materials that can reversibly change color upon water treatment have attracted much attention owing to their potential applications in diverse fields. Herein, for the first time, we report that space-confined CsPbBr₃ nanocrystals (NCs) are hydrochromic. When CsPbBr₃ NCs are loaded into a porous matrix, reversible transition between luminescent CsPbBr₃ and non-luminescent CsPb₂Br₅ can be achieved upon the exposure/removal of water. The potential applications of hydrochromic CsPbBr₃ NCs in anti-counterfeiting are demonstrated by using CsPbBr₃ NCs@mesoporous silica nanospheres (around 100 nm) as the starting material. Owing to the small particle size and negatively charged surface, the as-prepared particles can be laser-jet printed with high precision and high speed. We demonstrate the excellent stability over repeated transformation cycles without color fade. This new discovery may not only deepen the understanding of CsPbX₃, but also open a new way to design CsPbX₃ materials for new applications.     

Impact of Zn-doping on the composition,stability, luminescence properties of silica coated all-inorganic cesium lead bromide nanocrystals and their biocompatibility

Cesium lead halide (CsPbX₃: X = I, Br, Cl) nanocrystals (NCs) are believed to be potential candidates for bioimaging applications. However, their low structural stability against polar solvents remains as a major limitation. To improve the NCs stability and maintain high emission intensity, we synthesized silica coated Zn-doped core@shell perovskite NCs via modified ligand assisted reprecipitation (LARP) synthetic method under relatively high humid condition. We systemically varied the composition inside the perovskite structure and then studied their photophysical properties and stability. Interestingly, the Zn-doping amount controls the ratio of CsPbBr₃ to Cs₄PbBr₆ perovskites inside the core and also facilitates the growth of (OA)₂PbBr₄ shell, enables overall increase in NCs emission intensity and stability. We observed green color emission from these NCs in the spectral range of 494-506 nm with a maximum photoluminescence quantum yield (PLQY) up to 88%. The optimized Zn-doped NCs exhibited nearly four times better water stability compared to the bare NCs and retain emission properties for several months even in highly polar solvents. Finally, we performed biocompatibility test of the NCs generated on biological samples and hydroponics test in a gardenia leaf for their potential bioimaging applications.     

Phase‐Stable CsPbI3 Nanocrystals: The Reaction Temperature Matters

High temperature colloidal synthesis for obtaining thermal, colloidal and phase‐stable CsPbI₃ nanocrystals with near‐unity quantum yield is reported. While standard perovskite synthesis reactions were carried out at 160 °C (below 200 °C), increase of another ≈100 °C enabled the alkylammonium ions to passivate the surface firmly and prevented the nanocrystals from phase transformation. This did not require any inert atmosphere storage, use of heteroatoms, specially designed ligands, or the ice cooling protocol. Either at high temperature in reaction flask or in the crude mixture or purified dispersed solution; these nanocrystals were observed stable and retained the original emission. Different spectroscopic analyses were carried out and details of the surface binding of alkyl ammonium ligands in place of surface Cs in the crystal lattice were investigated. As CsPbI₃ is one of the most demanding optical materials, bringing stability by proper surface functionalization without use of secondary additives would indeed help in wide spreading of their applications.     

How Chemical Bonding Impacts Halide Perovskite Nanocrystals Growth to Bulk Films: Implication of Pb−X Bond on Growth Kinetics

Lead halide perovskites nanocrystals have emerged as a leading candidate in perovskite solar cells and light-emitting diodes. Given their favorable, tunable optoelectronic properties through modifying the size of nanocrystals, it is imperative to understand and control the growth of lead halide perovskite nanocrystals. However, during the nanocrystal growth into bulk films, the effect of halide bonding on growth kinetics remains elusive. To understand how a chemical bonding of Pb−X (covalency and ionicity) impact on growth of nanocrystals, we have examined two different halide perovskite nanocrystals of CsPbCl₃ (more ionic) and CsPbI₃ (more covalent) derived from the same parent CsPbBr₃ nanocrystals. Tracking the growth of nanocrystals by monitoring the spectral features of bulk peaks (at 445 nm for Cl and at 650 nm for I) enables us to determine the growth activation energy to be 92 kJ/mol (for CsPbCl₃) versus 71 kJ/mol (for CsPbI₃). The electronegativity of halides in Pb−X bonds governs the bond strength (150–240 kJ/mol), characteristics of bonding (ionic versus covalent), and growth kinetics and resulting activation energies. A fundamental understanding of Pb−X bonding provides a significant insight into controlling the size of the perovskite nanocrystals with more desired optoelectronic properties.     

Novel hydrostable Z-scheme Ag/CsPbBr3/Bi2WO6 photocatalyst for effective degradation of Rhodamine B in aqueous solution

In this study, a hydrostable Z-scheme Ag/CsPbBr₃/Bi₂WO₆ photocatalyst was designed and fabricated for the degradation of Rhodamine B (RhB). The structural instability of CsPbX₃ perovskites in water is one of the main obstacles that restrict their practical application in photocatalytic wastewater treatment. The photocatalyst was prepared in three steps: passivation of CsPbBr₃ nanocrystals (NCs) with 3-mercaptopropionic acid (MPA), construction of a heterojunction between MPA-passivated CsPbBr₃ NCs and Bi₂WO₆ ultrathin nanosheets, and doping Ag nanoparticles as charge mediators in the heterojunction. The as-obtained 5%Ag/20%CsPbBr₃/Bi₂WO₆ exhibits good stability and excellent photocatalytic activity. The degradation rate is 93.9% in 120 min, which is 4.41 times than that of Bi₂WO₆.     

Ambient Air Temperature Assisted Crystallization for Inorganic CsPbI2Br Perovskite Solar Cells

Inorganic cesium lead halide perovskites, as alternative light absorbers for organic–inorganic hybrid perovskite solar cells, have attracted more and more attention due to their superb thermal stability for photovoltaic applications. However, the humid air instability of CsPbI₂Br perovskite solar cells (PSCs) hinders their further development. The optoelectronic properties of CsPbI₂Br films are closely related to the quality of films, so preparing high-quality perovskite films is crucial for fabricating high-performance PSCs. For the first time, we demonstrate that the regulation of ambient temperature of the dry air in the glovebox is able to control the growth of CsPbI₂Br crystals and further optimize the morphology of CsPbI₂Br film. Through controlling the ambient air temperature assisted crystallization, high-quality CsPbI₂Br films are obtained, with advantages such as larger crystalline grains, negligible crystal boundaries, absence of pinholes, lower defect density, and faster carrier mobility. Accordingly, the PSCs based on as-prepared CsPbI₂Br film achieve a power conversion efficiency of 15.5% (the maximum stabilized power output of 15.02%). Moreover, the optimized CsPbI₂Br films show excellent robustness against moisture and oxygen and maintain the photovoltaic dark phase after 3 h aging in an air atmosphere at room temperature and 35% relative humidity (R.H.). In comparison, the pristine films are completely converted to the yellow phase in 1.5 h.     

Revealing the Formation Mechanism of CsPbBr3 Perovskite Nanocrystals Produced via a Slowed‐Down Microwave‐Assisted Synthesis

We developed a microwave‐assisted slowed‐down synthesis of CsPbBr₃ perovskite nanocrystals, which retards the reaction and allows us to gather useful insights into the formation mechanism of these nanoparticles, by examining the intermediate stages of their growth. The trends in the decay of the emission intensity of CsPbBr₃ nanocrystals under light exposure are well correlated with their stability against decomposition in TEM under electron beam. The results show the change of the crystal structure of CsPbBr₃ nanocrystals from a deficient and easier to be destroyed lattice to a well crystallized one. Conversely the shift in the ease of degradation sheds light on the formation mechanism, indicating first the formation of a bromoplumbate ionic scaffold, with Cs‐ion infilling lagging a little behind. Increasing the cation to halide ratio towards the stoichiometric level may account for the improved radiative recombination rates observed in the longer reaction time materials.     

Ultrafast Charge Delocalization Dynamics of Ambient Stable CsPbBr3 Nanocrystals Encapsulated in Polystyrene Fiber

CsPbBr₃ nanocrystals (NCs) encapsulated in a transparent polystyrene (PS) fiber matrix (CsPbBr₃@PS) have been synthesized to protect the NCs. The ultrafast charge delocalization dynamics of the embedded NCs have been demonstrated, and the results are compared with the pristine CsPbBr₃ in toluene. The electrospinning method was employed for the preparation of CsPbBr₃@PS fibers by using a polystyrene solution doped with pre-synthesized CsPbBr₃ and characterized by XRD, HRTEM, and X-ray photoelectron spectroscopy (XPS). Energy level diagrams of CsPbBr₃ and PS suggest that CsPbBr₃@PS fibers make a type I core–shell structure. The carrier cooling for CsPbBr₃@PS fibers is found to be much slower than pure CsPbBr₃ NCs. This observation suggests that photoexcited electrons from CsPbBr₃ NCs get delocalized from the conduction band of the perovskite to lowest unoccupied molecular orbital (LUMO) of the PS fiber matrix. The CsPbBr₃@PS fibers possess remarkable stability under ambient conditions as well as in water over months. The clear understanding of charge carrier relaxation dynamics of CsPbBr₃ confined in PS fibers could help to design robust optoelectronic devices.     

High sensitivity ratiometric fluorescence temperature sensing using the microencapsulation of CsPbBr3 and K2SiF6:Mn4+ phosphor

A dual emission sensing film has been prepared for colorimetric temperature sensing using CsPbBr₃ perovskite nanocrystals (CsPbBr₃ NCs) and manganese doped potassium fluorosilicate (K₂SiF₆:Mn⁴⁺, KSF) encapsulated in polystyrene by a microencapsulation strategy. The CsPbBr₃-KSF-PS film shows good temperature sensing response from 30 °C to 70 °C, with a relative temperature sensitivity (S_r) up to 10.31% °C^?1 at 45 °C. Meanwhile, the film maintains more than 95% intensity after 6 heating-cooling cycles and keeps its fluorescence characteristics after 3 months. The film can be used to monitor temperature change by naked eye under a UV lamp. In particular, the temperature discoloration point of the sensing film can be controlled by the ratio change of CsPbBr₃:KSF to expand its applications. The study of the CsPbBr₃-KSF-PS sensing mechanism in this work is helpful to provide effective strategies for the design of reliable, high sensitivity and stable temperature sensing system using CsPbBr₃ NCs.     

Carrier dynamics in CsPbI3 perovskite microcrystals synthesized in solution phase

Carrier diffusion and recombination kinetics in all-inorganic CsPbI₃ perovskite microcrystals directly synthesized in solution phase are reported.     

Low temperature fabrication for high-performance semitransparent CsPbI2Br perovskite solar cells

All-inorganic Cs Pb I₂Br perovskite with suitable bandgap and excellent thermal stability has been reported as the most promising candidate for efficient perovskite solar cells（PSCs）. However, the high annealing temperature（> 250 °C） and poor stability of α-Cs Pb I₂Br greatly limit the future application in photovoltaic field. Herein, a facile method is reported to prepare α-Cs Pb I₂Br perovskite film with high stability at low temperature（70 °C） by incorporat...     

Aqueous Synthesis of Methylammonium Lead Halide Perovskite Nanocrystals

Methylammonium lead halide perovskite nanocrystals offer attractive optoelectronic properties but suffer from fast degradation in the presence of water. In contradiction to this observation, we demonstrate the possibility of a direct aqueous synthesis of CH₃NH₃PbX₃ (X=Br or Cl/Br) nanocrystals through the reaction between the lead halide complex and methylamine when the pH is maintained in the range of 0–5. Under these synthetic conditions, the positively charged surface of the perovskite nanocrystals and the proper ionic balance help to prevent their decomposition in water. Additional surface capping with organic amine ligands further improves the photoluminescence quantum yield of the perovskite nanocrystals to values close to 40 %, ensures their stability under ambient conditions for several months, and their photoluminescence performance under continuous 0.1 W mm^?2 405 nm light irradiation for over 250 hours.     

CsPbBr3 QD/AlOx Inorganic Nanocomposites with Exceptional Stability in Water,Light, and Heat

Herein, the assembly of CsPbBr₃ QD/AlO_x inorganic nanocomposites, by using atomic layer deposition (ALD) for the growth of the amorphous alumina matrix (AlO_x ), is described as a novel protection scheme for such QDs. The nucleation and growth of AlO_x on the QD surface was thoroughly investigated by miscellaneous techniques, which highlighted the importance of the interaction between the ALD precursors and the QD surface to uniformly coat the QDs while preserving the optoelectronic properties. These nanocomposites show exceptional stability towards exposure to air (for at least 45 days), irradiation under simulated solar spectrum conditions (for at least 8 h), and heat (up to 200 °C in air), and finally upon immersion in water. This method was extended to the assembly of CsPbBr_x I_3−x QD/AlO_x and CsPbI₃ QD/AlO_x nanocomposites, which were more stable than the pristine QD films.     

Hole‐Boosted Cu(Cr,M)O2 Nanocrystals for All‐Inorganic CsPbBr3 Perovskite Solar Cells

The all‐inorganic CsPbBr₃ perovskite solar cell (PSC) is a promising solution to balance the high efficiency and poor stability of state‐of‐the‐art organic–inorganic PSCs. Setting inorganic hole‐transporting layers at the perovskite/electrode interface decreases charge carrier recombination without sacrificing superiority in air. Now, M‐substituted, p‐type inorganic Cu(Cr,M)O₂ (M=Ba²⁺, Ca²⁺, or Ni²⁺) nanocrystals with enhanced hole‐transporting characteristics by increasing interstitial oxygen effectively extract holes from perovskite. The all‐inorganic CsPbBr₃ PSC with a device structure of FTO/c‐TiO₂/m‐TiO₂/CsPbBr₃/Cu(Cr,M)O₂/carbon achieves an efficiency up to 10.18 % and it increases to 10.79 % by doping Sm³⁺ ions into perovskite halide, which is much higher than 7.39 % for the hole‐free device. The unencapsulated Cu(Cr,Ba)O₂‐based PSC presents a remarkable stability in air in either 80 % humidity over 60 days or 80 °C conditions over 40 days or light illumination for 7 days.     

CsPbBr3 QD/AlOx Inorganic Nanocomposites with Exceptional Stability in Water,Light, and Heat

Herein, the assembly of CsPbBr₃ QD/AlO_x inorganic nanocomposites, by using atomic layer deposition (ALD) for the growth of the amorphous alumina matrix (AlO_x ), is described as a novel protection scheme for such QDs. The nucleation and growth of AlO_x on the QD surface was thoroughly investigated by miscellaneous techniques, which highlighted the importance of the interaction between the ALD precursors and the QD surface to uniformly coat the QDs while preserving the optoelectronic properties. These nanocomposites show exceptional stability towards exposure to air (for at least 45 days), irradiation under simulated solar spectrum conditions (for at least 8 h), and heat (up to 200 °C in air), and finally upon immersion in water. This method was extended to the assembly of CsPbBr_x I_3−x QD/AlO_x and CsPbI₃ QD/AlO_x nanocomposites, which were more stable than the pristine QD films.