多孔有机盐单晶的合成及各向异性质子导电性能

以cis,cis-1,3,5-三氨基环己烷·3HBr和均苯四甲酸在室温下通过离子键构筑了具有规整形貌和大尺寸的晶态多孔有机盐CPOS-10, 其具有较好的热稳定性和永久多孔性. 得益于规整形貌及大尺寸单晶, 首次实现了对多孔有机盐单晶各向异性质子导电性能的研究, 并结合晶体结构探索了各向异性质子导电的机理. 结果表明, 水分子浓度对CPOS-10质子电导率的大小具有重要作用, 骨架内水分子浓度高的晶面更易于与极性基团构成氢键网络, 促进质子传导, 利用此网络的质子传导具有更高的质子电导率. 因此, 骨架内水分子的不均匀分布是导致单晶各向异性质子导电的主要原因. 对CPOS-10单晶各向异性质子导电性能的探索可为研究多孔有机盐的质子导电机理提供重要的依据.     

Pore Geometry and Surface Engineering of Covalent Organic Frameworks for Anhydrous Proton Conduction

Developing new materials for anhydrous proton conduction under high-temperature conditions is significant and challenging. Herein, we create a series of highly crystalline covalent organic frameworks (COFs) via a pore engineering approach. We simultaneously engineer the pore geometry (generating concave dodecagonal nanopores) and pore surface (installing multiple functional groups such as −C=N−, −OH, −N=N− and −CF₃) to improve the utilization efficiency and host–guest interaction of proton carriers, hence benefiting the enhancement of anhydrous proton conduction. Upon loading with H₃PO₄, COFs can realize a proton conductivity of 2.33×10⁻² S cm⁻¹ under anhydrous conditions, among the highest values of all COF materials. These materials demonstrate good stability and maintain high proton conductivity over a wide temperature range (80–160 °C). This work paves a new way for designing COFs for anhydrous proton conduction applications, which shows great potential as high-temperature proton exchange membranes.     

Synthesis of Crystalline Porous Organic Salts with High Proton Conductivity

Self‐assembled crystalline porous organic salts (CPOSs) formed by an acid–base combination and with one‐dimensional polar channels containing water molecules have been synthesized. The water content in the channels of the porous salts plays an important role in the proton conduction performance of the materials. The porous salts described in this study feature high proton conductivity at ambient conditions and can reach as high as 2.2×10⁻² S cm⁻¹ at 333 K and under high humid conditions. This is among the best conductivity values reported to date for porous materials, for example, metal–organic frameworks and hydrogen‐bonded organic frameworks. These materials exhibiting permanent porosity represent a group of porous materials and may find interesting applications in proton‐exchange membrane fuel cells.     

Two‐in‐One: Inherent Anhydrous and Water‐Assisted High Proton Conduction in a 3D Metal–Organic Framework

The development of solid‐state proton‐conducting materials with high conductivity that operate under both anhydrous and humidified conditions is currently of great interest in fuel‐cell technology. A 3D metal–organic framework (MOF) with acid–base pairs in its coordination space that efficiently conducts protons under both anhydrous and humid conditions has now been developed. The anhydrous proton conductivity for this MOF is among the highest values that have been reported for MOF materials, whereas its water‐assisted proton conductivity is comparable to that of the organic polymer Nafion, which is currently used for practical applications. Unlike other MOFs, which conduct protons either under anhydrous or humid conditions, this compound should represent a considerable advance in the development of efficient solid‐state proton‐conducting materials that work under both anhydrous and humid conditions.     

A novel proton conductor of imidazole-aluminium phosphate hybrids in the solid state

Anhydrous proton transport at temperatures above 100 °C has attracted considerable attention in the development of fuel cells that operate at intermediate temperatures. Liquid-state imidazole (ImH) is known to be a fast anhydrous proton conductor above 100 °C; however, evaporation and severe conductivity drops above and below its melting point (～90 °C), respectively, are major drawbacks to ImH. In this paper, we report a novel solid-state anhydrous ImH-Al(H(2)PO(4))(3) (AlP) hybrid material prepared via a simple synthesis using mechanical milling. This solid-state hybrid exhibits relatively a high ionic conductivity of ～0.1 mS cm(-1) at 100 °C and remarkably a small activation energy of 0.23 eV. In addition, the ImH-AlP hybrid material provides a means of overcoming both temperature-dependent drawbacks to pure ImH: (1) the ImH-AlP hybrid is thermally stable up to 130 °C, and (2) the hybrid material maintains high ionic conductivity below the melting point of ImH.     

Proton conductivity in crosslinked hydrophilic ionic polymer system: Competitive hydration,crosslink heterogeneity,and ineffective domains

High proton conductivity in hydrophobic backbone‐based polymers such as Nafion is known to be due to the formation of organized ionic clusters and channels upon hydration. However, a lower proton conductivity in hydrophilic, ionic polymers and the role played by the microstructure are not well understood. In this work, we demonstrate the importance of heterogeneity in crosslinked ionic polymer networks in explaining proton conductivity. Poly(vinyl alcohol) (PVA) crosslinked with sulfosuccinic acid (SSA) is used as the model polymer system for the study. Evolution of the microstructure with hydration and the effect on proton conductivity are analyzed using ATR‐FTIR spectroscopy, dielectric spectroscopy, and small‐angle neutron scattering. We show that the presence of the two hydrophilic groups in PVA‐SSA (hydroxyl and sulfonic acid), as opposed to Nafion, results in competition for water and a lower proton conductivity. The crosslinked polymer–water system contains heterogeneous domains of crosslink nodes which are conductive. These domains (of size 20–35 Å) interconnect with each other and form tortuous percolating domains through which proton conduction takes place. The presence of hydroxyl groups results in some of the domains being ineffective for proton transport, resulting in a lower conductivity. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1087–1101     

Nanostructure evolution in high-temperature perfluorosulfonic acid ionomer membrane by small-angle X-ray scattering

The high-temperature morphology of supported liquid membranes (SLMs) prepared from perfluorinated membranes such as Nafion and Hyflon and hydrophobic ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (BMI-TFSI) has been investigated by small-angle X-ray scattering (SAXS). Proton conductivity results of SLMs before and after leaching show an increase in conductivity with temperature up to 160 °C in an anhydrous environment. DSC results show that crystallites within perfluorinated membranes are thermally stable up to 196 °C. High-temperature SAXS results have been used to correlate structure and morphology of supported liquid membranes with high-temperature conductivity data. The ionic liquid essentially acts as a proton solvent in a similar way to water in hydrated Nafion membranes and increases size of clusters, which allow percolation to be achieved more easily. The cation of the ionic liquid interacts with sulfonate groups within ionic domains through electrostatic interactions and displaces protons. Protons can associate with free anions of the ionic liquid, which are loosely associated with cations and can transport by hopping from anion sites within the membrane. The ionic liquid contributes to proton conductivity at high temperature through achievement of long-range ordering and subsequent percolation.     

Anhydrous proton conducting membranes based on electron-deficient nanoparticles/PBI-OO/PFSA composites for high-temperature PEMFC

PEMFC operating at high temperature (100–200 °C) are expected to have significant advantages but face big challenges in the development of suitable proton exchange membranes. This communication describes novel PBI-OO/PFSA blend membranes, which facilitate proton conduction under anhydrous conditions based on a “proton donor–proton acceptor” concept. The proton conductivity of the blends under anhydrous conditions exceeded that of PFSA by a factor of 50 at ambient temperature and of 2–4 at elevated temperature. Intermolecular interaction between two polymer components was investigated by FT-IR spectroscopy. After incorporation of inorganic electron-deficient compounds (BN nanoparticles), the anhydrous proton conductivity of the composites was higher than that of the bare PFSA by three orders of magnitude at ambient temperature and more than one order of magnitude at 140 °C.     

Anhydrous proton transport system based on zwitterionic liquid and HTFSI

Novel binary ionic liquids based on zwitterionic liquid and HTFSI for anhydrous proton transport were prepared and showed ionic conductivity of about 10(-2) S cm(-1) at 150 degrees C and a zwitterionic liquid content of 60 mol%.     

分散溶剂对PEMFC催化层中超薄Nafion离聚物质子传导的影响

质子交换膜燃料电池(PEMFC)商业化应用的瓶颈仍然是贵金属催化剂导致的成本问题。然而,目前对于催化层中纳米尺度全氟磺酸离聚物(以Nafion为代表)薄膜中质子传导的问题研究不足,无法完善三相界面的成型规律,进而指导催化层设计。在催化层浆料制备过程中,分散溶剂对Nafion的分散形态有直接影响,可能对催化层成型后附着在催化剂颗粒表面Nafion薄膜的微观结构有潜在影响,进而影响Nafion薄膜的质子传导能力。因此,在本文中利用分子自组装技术模拟催化层离聚物薄膜的聚集过程,于模型基底上制备厚度精确可控的纳米尺度Nafion薄膜,并通过微观测试表征技术探索并建立纳米尺度Nafion离聚物的微观结构模型,阐明分散溶剂对Nafion薄膜微观结构及质子传导的影响。研究发现Nafion薄膜在纳米尺度下的质子电导率比体相膜的质子电导率低一个数量级,使用介电常数较小的醇类溶剂可以使Nafion薄膜形成更有利于质子传导的微观结构,使Nafion薄膜的质子电导率得到提高。相关研究结果为优化PEMFC催化层结构,改善PEMFC催化层中质子传导问题提供给了依据。     

Crystallizing Self-Standing Covalent Organic Framework Membranes for Ultrafast Proton Transport in Flow Batteries

Covalent organic frameworks (COFs) display great potential to be assembled into proton conductive membranes for their uniform and controllable pore structure, yet constructing self-standing COF membrane with high crystallinity to fully exploit their ordered crystalline channels for efficient ionic conduction remains a great challenge. Here, a macromolecular-mediated crystallization strategy is designed to manipulate the crystallization of self-standing COF membrane, where the −SO₃H groups in introduced sulfonated macromolecule chains function as the sites to interact with the precursors of COF and thus offer long-range ordered template for membrane crystallization. The optimized self-standing COF membrane composed of highly-ordered nanopores exhibits high proton conductivity (75 mS cm⁻¹ at 100 % relative humidity and 20 °C) and excellent flow battery performance, outperforming Nafion 212 and reported membranes. Meanwhile, the long-term run of membrane is achieved with the help of the anchoring effect of flexible macromolecule chains. Our work provides inspiration to design self-standing COF membranes with ordered channels for permselective application.     

Sulfonated 2D Covalent Organic Frameworks for Efficient Proton Conduction

Open 1D channels found in covalent organic frameworks are unique and promising to serve as pathways for proton conduction; how to develop high-rate yet stable transporting systems remains a substantial challenge. Herein, this work reports a strategy for exploring proton-conducting frameworks by engineering pore walls and installing proton-containing polymers into the pores. Amide-linked and sulfonated frameworks were synthesized from imine-linked precursors via sequentially engineering to oxidize into amide linkages and to further anchor sulfonic acid groups onto the pore walls, enabling the creation of sulfonated frameworks with high crystallinity and channel ordering. Integrating sulfonated polyether ether ketone chains into the open channels enables proton hopping to across the channels, greatly increases proton conductivity and enables a stable continuous run. These results suggest a way to explore proton-conducting COFs via systematic engineering of the wall and space of the open nanochannels.     

2-取代咪唑衍生物掺杂高温非水用Nafion质子交换膜的制备和性能

高温质子交换膜燃料电池所面临的一个主要技术障碍是高温低湿度环境下能够具有满足电池工作条件的膜的制备.本文通过所合成的2-取代咪唑衍生物与全氟磺酸树脂的掺杂,采用溶液重铸法制备了可以在高温无水条件下工作的质子交换膜.通过2-位疏水基团的接枝,实现了非水质子传导介质的咪唑环在膜内的固定,所制备的复合质子交换膜的导质子率在160℃无水条件下达到6.8×10^-3Scm^-1;而且相比全氟磺酸均质膜,其热稳定性也有所提高.采用静电力显微镜观察到了所制备的复合质子交换膜内相互连接的离子团簇的形成;结合其质子传导活化能,提出了所制备的复合质子交换膜在120℃以下质子传导以跳跃方式为主;在120℃以上,则以咪唑环的＂钟摆＂形式实现质子在膜内的传输.     

BaCe0.9Y0.1O3-α固体电解质的离子导电性

用交流复阴抗谱法测定了混合离子(质子+氧离子)导电性固体电解质BaCe0.9Y0.1O3-α在600～1000℃下不同气氛(干燥空气、湿润空气及湿润氢气)中的电导率;通过测定总电导率(离子电导率+电子电导率)随气氛中氧分压po2变化,求得离子电导率和离子迁移数;用氢浓差电池方法测得氢气中的质子迁移数。结果表明,BaCe0.9Y0.1O3-α固体电解质在氧分压<10Pa的气氛(如氢气)中几乎为纯离子导体,而在氧分压为10～10^5Pa的气氛(如空气)中为离子和电子空穴混合导体;样品在各气氛中的离子电导率均高于10^-2S·cm^-1。     

Dielectric Dispersion and Electric Relaxation Processes Induced by Ionic Conduction in Formamide, 2-Aminoethanol and Their Binary Mixtures

The complex dielectric permittivity, ionic conductivity, electric modulus and impedance spectra of the dipolar molecules formamide (FA), 2-aminoethanol (AE) and their binary mixtures were investigated in the frequency range from 20 Hz to 1 MHz at 303.15 K. Debye-type distributions of the frequency dependent electric modulus and complex impedance were found, corresponding to an ionic conduction relaxation process in the upper frequency regime of the spectra, whereas a spike in the impedance spectra at low frequencies confirms the contribution of an electrode polarization (EP) relaxation process induced by ionic conduction. Due to the high static permittivity of FA, its ionic conductivity was found more than one order of magnitude higher than that of the AE, which is also shown by the comparative values of their EP and ionic conductivity relaxation times. The dependences of dc ionic conductivity values of the binary mixtures on their relaxation times and static permittivity were explored. The concentration dependent static permittivity and the relaxation times led us to infer the formation of a 1:1 H-bonded stable complex between FA and AE molecules with reduction in the number of effective parallel-aligned dipoles.     

Anhydrous proton-conducting polymeric electrolytes for fuel cells

The need to design proton-conducting electrolytes for fuel cells operating at temperatures of 120 degrees C and above has prompted the investigation of various "water-free" polymeric materials. The present study investigates the properties of "water-free" proton-conducting membranes prepared from high-molecular-weight polymeric organic amine salts. Specifically, the properties of bisulfates and dihydrogenphosphates of poly-2-vinylpyridine (P2VP), poly-4-vinylpyridine (P4VP), and polyvinylimidazoline (PVI) have been investigated over the temperature range of 25-180 degrees C. Nanocomposites of these polymeric organic amine salts and hydroxylated silica have also been investigated in this study. These polymers are found to be stable and proton-conducting at temperatures up to 200 degrees C. In all the polymer examples studied herein, the phosphates are more conducting than the bisulfates. The activation energy for ionic conduction was found to decrease with increasing temperature, and this is associated with the increased polymer mobility and ionization of the proton. This is confirmed by the high degree of motional narrowing that is observed in proton NMR experiments. The measured values of conductivity and the differences in pKa values of the polymeric organic amine and the mineral acid are clearly correlated. This observation provides the basis for the design of other water-free acid-base polymer systems with enhanced proton conductivity. The results presented here suggest that anhydrous polymer systems based on acid-base polymer salts could be combined with short-range proton conductors such as nanoparticulate silica to achieve acceptable conductivity over the entire temperature range.     

Heteropolyacid-encapsulated self-assembled materials for anhydrous proton-conducting electrolytes

The composite material of heteropolyacid (12-phosphotungstic acid; PWA) and polystyrene sulfonic acid (PSS) construct the PWA-encapsulated material by the self-assembly of -SO3H onto the PWA surface; as a result, the fast proton transfer occurred at the interface between the PWA and -SO3H, and the encapsulated material indicated the high anhydrous proton conductivity of 1 x 10(-2) S cm(-1) at 180 degrees C. These anhydrous proton-conducting materials without the existence of water molecules are quite different from customary ion-exchange membrane, such as Nafion, and may have advantages as an electrolyte membrane for polymer electrolyte membrane fuel cells operating at intermediate temperatures under anhydrous conditions but also for electrochemical devices including electrochromic displays, chemical sensors, and others.     

Coordination-chemistry control of proton conductivity in the iconic metal-organic framework material HKUST-1

HKUST-1, a metal-organic framework (MOF) material containing Cu(II)-paddlewheel-type nodes and 1,3,5-benzenetricarboxylate struts, features accessible Cu(II) sites to which solvent or other desired molecules can be intentionally coordinated. As part of a broader investigation of ionic conductivity in MOFs, we unexpectedly observed substantial proton conductivity with the "as synthesized" version of this material following sorption of methanol. Although HKUST-1 is neutral, coordinated water molecules are rendered sufficiently acidic by Cu(II) to contribute protons to pore-filling methanol molecules and thereby enhance the alternating-current conductivity. At ambient temperature, the chemical identities of the node-coordinated and pore-filling molecules can be independently varied, thus enabling the proton conductivity to be reversibly modulated. The proton conductivity of HKUST-1 was observed to increase by ~75-fold, for example, when node-coordinated acetonitrile molecules were replaced by water molecules. In contrast, the conductivity became almost immeasurably small when methanol was replaced by hexane as the pore-filling solvent.     

1H-1,2,4-Triazole as solvent for imidazolium methanesulfonate

The solvation effect of 1H-1,2,4-triazole towards imidazolium methanesulfonate was studied by blending imidazolium methanesulfonate and 1H-1,2,4-triazole. Upon addition of 1H-1,2,4-triazole, the melting point of imidazolium methanesulfonate was lowered to less than 100 °C while maintaining the high ionic conductivity for a wide composition range of the blend. The ionic conductivity of the blend can be adequately described by using the Vogel-Fulcher-Tamman equation. A vehicle mechanism is postulated to govern the proton conduction for the blend. The contribution of protons to the ionic conductivity was corroborated electrochemically. The blend exhibited electrochemical activities for H(2) oxidation and O(2) reduction at a Pt electrode, as well as a wide electrochemical window. Therefore, suitable blends can possibly serve as electrolytes for polymer electrolyte membrane fuel cells operating under non-humidifying conditions. The solvation effect studied herein suggests a promising approach to a wider application area of protic ionic liquids.     

Ion transport in a class of imidazole-based liquid/solid protic ionics

A class of protic ionic-compounds were prepared by Br?nsted acid-base reaction of imidazole or benzimidazole with one of the following acids: trifluoromethanesulfonic, nonafluorobutanesulfonic, para-toluenesulfonic and trifluoroacetic. Except those based on trifluoroacetic acid, all prepared compounds are thermally stable up to at least 270 °C. They are solid up to temperatures between 134 and 220 °C, depending on their constituent acid and base. A simple physico-mathematical model of ion motion in the lattice was developed and implemented to correctly interpret frequency-dependent electrical response of these materials, particularly in the solid state, and investigate their ion-conducting behavior as a function of temperature. These ionic compounds display sensible ionic conductivity up to ca. 5 × 10(-4) and 5 × 10(-2) S cm(-1) in the solid and molten state, respectively, under fully anhydrous conditions. The presence of absorbed water, after brief exposure to an ambient atmosphere, enhances conduction properties remarkably. Conductivity values up to 10(-3) and 10(-1) S cm(-1) were registered, respectively, in the solid and molten state, after short exposure to (humid) ambient air. It is argued how absorbed water molecules may remove protons from (ImH)(+) or (BImH)(+) groups, thereby enabling a chain mechanism of proton-hopping through non-protonated Im or BIm sites. It is discussed how these results and methods may inspire designing protic ionic-materials at the solid-state, with enhanced proton conduction even under fully-anhydrous conditions.