氧化铁镍电极上析氧反应的电化学研究

应用射频反应磁控溅射法制备阳极催化氧化铁镍薄膜,由循环伏安、线性扫描伏安、极化曲线和电化学交流阻抗谱等研究发生在该电极上的氧化反应.结果表明,作为活化中心的铁能使过电势降低,并且随着溅射过程氧流量的增加催化性能增强,铁的掺入使得速率限定步骤由OH-的释放变为氧原子的结合.与镍相比,氧化铁镍是更理想的催化阳极材料,当电流密度为50 mA/cm2时,其氧的过电势比镍的下降了500 mV.     

Identification of Key Reversible Intermediates in Self‐Reconstructed Nickel‐Based Hybrid Electrocatalysts for Oxygen Evolution

The oxygen evolution reaction (OER) has been explored extensively for reliable hydrogen supply to boost the energy conversion efficiency. The superior OER performance of newly developed non‐noble metal electrocatalysts has concealed the identification of the real active species of the catalysts. Now, the critical active phase in nickel‐based materials (represented by NiNPS) was directly identified by observing the dynamic surface reconstruction during the harsh OER process via combining in situ Raman tracking and ex situ microscopy and spectroscopy analyses. The irreversible phase transformation from NiNPS to α‐Ni(OH)₂ and reversible phase transition between α‐Ni(OH)₂ and γ‐NiOOH prior to OER demonstrate γ‐NiOOH as the key active species for OER. The hybrid catalyst exhibits 48‐fold enhanced catalytic current at 300 mV and remarkably reduced Tafel slope to 46 mV dec^?1, indicating the greatly accelerated catalytic kinetics after surface evolution.     

Influence of the Oxide Content in the Catalytic Power of Raney Nickel in Hydrogen Generation

The influence of oxides in the hydrogen evolution on Raney nickel electrocatalysts was characterized by electrochemical impedance measurements. In addition, these materials show competitive overpotentials for hydrogen evolution with a modified Watts bath as a binder for the Raney nickel. The optimum result was ?190?mV of overpotential at 100?mA?cm^?2. Oxygen in the Raney Ni catalyst affects its electroactivity toward hydrogen evolution. The source of oxygen is related to the presence of chloride ions in the modified Watts bath. A Watts bath binds Raney Ni particles to the surface of the catalysts and chloride regulates the oxygen content in the nickel binder during electrodeposition. High oxygen content increases the hydrogen evolution overpotential of the electrode. The electroactivity of the synthesized porous coatings was evaluated by polarization curves and impedance plots. In addition, surface characterization by X-ray diffraction, field emission–scanning electron microscopy equipped with energy-dispersive analysis, and X-ray photoelectron spectroscopy is reported.     

硼、磷共掺杂铁钴双金属材料的制备及其电催化析氧性能

采用一步水热法合成了硼、磷共掺杂铁钴材料(Fe-Co-B-P)。借助扫描电子显微镜(SEM)、X射线衍射(XRD)、X射线光电子能谱(XPS)、傅里叶变换红外光谱(FT-IR)等技术对所合成材料的形貌、结构和组成进行表征。利用线性扫描伏安(LSV)、循环伏安(CV)、电化学阻抗谱(EIS)等技术研究材料电化学析氧反应(OER)性能。结果表明,Fe-Co-B-P表面疏松且粗糙,颗粒间有许多空隙。在电流密度为10和100 mA·cm^-2时,其过电势分别为278和309 mV,Tafel斜率为24 mV·dec^-1,说明该材料具有较优的电催化析氧性能。其在连续进行10 h的计时电位测试过程中,电势基本保持在1.55 V(vs RHE),表明该催化剂具有较好的电化学稳定性。这是由于铁钴双金属与硼、磷非金属之间的协同作用促进了电子的传递。     

Nickel Confined in the Interlayer Region of Birnessite: an Active Electrocatalyst for Water Oxidation

We report a synthetic method to enhance the electrocatalytic activity of birnessite for the oxygen evolution reaction (OER) by intercalating Ni²⁺ ions into the interlayer region. Electrocatalytic studies showed that nickel (7.7 atomic %)‐intercalated birnessite exhibits an overpotential (η) of 400 mV for OER at an anodic current of 10 mA cm^?2. This η is significantly lower than the η values for birnessite (η≈700 mV) and the active OER catalyst β‐Ni(OH)₂ (η≈550 mV). Molecular dynamics simulations suggest that a competition among the interactions between the nickel cation, water, and birnessite promote redox chemistry in the spatially confined interlayer region.     

Facile one-step synthesis of Ru doped NiCoP nanoparticles as highly efficient electrocatalysts for oxygen evolution reaction

Transition metal phosphides (TMPs) as ever-evolving electrocatalytic materials have attracted increasing attention in water splitting reactions owing to their cost-effective, highly active and stable catalytic properties. This work presents a facile synthetic route to NiCoP nanoparticles with Ru dopants which function as highly efficient electrocatalysts for oxygen evolution reaction (OER) in alkaline media. The Ru dopants induced a high content of Ni and Co vacancies in NiCoP nanoparticles, and the more defective Ru doped NiCoP phase than undoped NiCoP ones led to a greater number of catalytically active sites and improved electrical conductivity after undergoing electrochemical activation. The Ru doped NiCoP catalyst exhibited high OER catalytic performance in alkaline media with a low overpotential of 281 mV at 10 mA cm⁻² and a Tafel slope of 42.7 mV dec⁻¹.     

硼、磷共掺杂铁钴双金属材料的制备及其电催化析氧性能

采用一步水热法合成了硼、磷共掺杂铁钴材料(Fe-Co-B-P)。借助扫描电子显微镜(SEM)、X射线衍射(XRD)、X射线光电子能谱(XPS)、傅里叶变换红外光谱(FT-IR)等技术对所合成材料的形貌、结构和组成进行表征。利用线性扫描伏安(LSV)、循环伏安(CV)、电化学阻抗谱(EIS)等技术研究材料电化学析氧反应(OER)性能。结果表明，Fe-Co-B-P表面疏松且粗糙，颗粒间有许多空隙。在电流密度为10和100 mA·cm^-2时，其过电势分别为278和309 mV，Tafel斜率为24 mV·dec^-1，说明该材料具有较优的电催化析氧性能。其在连续进行10 h的计时电位测试过程中，电势基本保持在1.55 V (vs RHE)，表明该催化剂具有较好的电化学稳定性。这是由于铁钴双金属与硼、磷非金属之间的协同作用促进了电子的传递。     

Laser-Ablation-Produced Cobalt Nickel Phosphate with High-Valence Nickel Ions as an Active Catalyst for the Oxygen Evolution Reaction

Cost-effective, highly efficient and stable non-noble metal-based catalysts for the oxygen evolution reaction (OER) are very crucial for energy storage and conversion. Here, an amorphous cobalt nickel phosphate (CoNiPO₄), containing a considerable amount of high-valence Ni³⁺ species as an efficient electrocatalyst for OER in alkaline solution, is reported. The catalyst was converted from Co-doped Ni₂P through pulsed laser ablation in liquid (PLAL) and exhibits a large specific surface area of 162.5 m² g⁻¹ and a low overpotential of 238 mV at 10 mA cm⁻² with a Tafel slope of 46 mV dec⁻¹, which is much lower than those of commercial RuO₂ and IrO₂. This work demonstrates that PLAL is a powerful technology for generating amorphous CoNiPO₄ with high-valence Ni³⁺, thus paving a new way towards highly effective OER catalysts.     

Glucose Electro‐oxidation on Graphite Electrode Modified with Nickel/Chromium Nanoparticles

In this study, an available and inexpensive graphite substrate, was easily modified with Ni/Cr nanoparticles via electrodeposition technique in a very short time (3 min) and used as an electrocatalyst for glucose oxidation in alkaline solution. Graphite electrode modified with Ni/Cr nanoparticles demonstrated an outstanding electrocatalytic performance to glucose oxidation in comparison to examined Ni‐based electrodes or even different materials in other reports. It is noteworthy to mention that adding a little Cr led to a synergistic effect with Ni; accordingly, the presence of Cr not only resulted in a greater adsorption of glucose molecules by chromium oxide but also boosted conductivity of the nickel oxide because of the enhancement of Ni(III) amount. The electrochemical studies were performed by cyclic voltammetry and electrochemical impedance spectroscopy (EIS). The morphology and structure of catalyst layer was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD) and energy dispersive x‐ray spectroscopy (EDS). The linear range of the electrode by cyclic voltammetry was between 2–31 mM with a high sensitivity of 2094 μA cm^?2 mM^?1. The repeatability and reproducibility of the proposed electrode was examined in glucose solution which were 0.3 % and 4.7 %, respectively. According to the low cost, ease and fast preparation, good repeatability and high sensitivity, this electrode can be a good candidate for nonenzymatic glucose oxidation.     

Crystallinity-Modulated Electrocatalytic Activity of a Nickel(II) Borate Thin Layer on Ni3B for Efficient Water Oxidation

The exploration of new efficient OER electrocatalysts based on nonprecious metals and the understanding of the relationship between activity and structure of electrocatalysts are important to advance electrochemical water oxidation. Herein, we developed an efficient OER electrocatalyst with nickel boride (Ni₃B) nanoparticles as cores and nickel(II) borate (Ni-B_i) as shells (Ni-B_i@NB) via a very simple and facile aqueous reaction. This electrocatalyst exhibited a small overpotential of 302 mV at 10 mA cm⁻² and Tafel slope of 52 mV dec⁻¹. More interestingly, it was found that the OER activity of Ni-B_i@NB was closely dependent on the crystallinity of the Ni-B_i shells. The partially crystalline Ni-B_i catalyst exhibited much higher activity than the amorphous or crystalline analogues; this higher activity originated from the enhanced intrinsic activity of the catalytic sites. These findings open up opportunities to explore nickel(II) borates as a new class of efficient nonprecious metal OER electrocatalysts, and to improve the electrocatalyst performance by modulating their crystallinity.     

Iron-Doped Nickel Molybdate with Enhanced Oxygen Evolution Kinetics

Electrochemical water splitting is one of the potential approaches for making renewable energy production and storage viable. The oxygen evolution reaction (OER), as a sluggish four-electron electrochemical reaction, has to overcome high overpotential to accomplish overall water splitting. Therefore, developing low-cost and highly active OER catalysts is the key for achieving efficient and economical water electrolysis. In this work, Fe-doped NiMoO₄ was synthesized and evaluated as the OER catalyst in alkaline medium. Fe³⁺ doping helps to regulate the electronic structure of Ni centers in NiMoO₄, which consequently promotes the catalytic activity of NiMoO₄. The overpotential to reach a current density of 10 mA cm⁻² is 299 mV in 1 m KOH for the optimal Ni_0.9Fe_0.1MoO₄, which is 65 mV lower than that for NiMoO₄. Further, the catalyst also shows exceptional performance stability during a 2 h chronopotentiometry testing. Moreover, the real catalytically active center of Ni_0.9Fe_0.1MoO₄ is also unraveled based on the ex situ characterizations. These results provide new alternatives for precious-metal-free catalysts for alkaline OER and also expand the Fe-doping-induced synergistic effect towards performance enhancement to new catalyst systems.     

Nickel(hydro)oxide/graphdiyne Catalysts for Efficient Oxygen Production Reaction

The transition metal-based materials have been regarded as promising electrocatalysts for oxygen evolution reaction(OER).However,achieving higher efficiency is largely limited by the valence states of metal species.Herein,different graphdiyne(GDY)-nickel composites were designed and synthesized[Ni(OH)2/GDY,NiOOH/GDY and NiOx/GDY]as the electrocatalysts for OER.The NiOx/GDY possessing the mixed valence states can drive the OER more efficiently than Ni(OH)2/GDY and NiOOH/GDY.NiOx/GDY gives the smallest overpotential of 310 mV at 10 mA/cm2 for OER,which is even superior to commercial RuO2 electrocatalyst.Experimental results reveal that not only the fast charge transfer induced by GDY but also the prominent roles of mixed Ni2+/Ni3+valence states boost the OER electrocatalytic performances.The presence of the mixed valence state was demonstrated to be helpful for the charge transfer,resulting in the enhancement of the catalytic activity.This work may provide a new direction to design and fabricate high-performance materials for OER and beyond.     

A novel titanium-supported nickel electrocatalyst for cyclohexanol oxidation in alkaline solutions

A novel titanium-supported nickel electrode (Ni/Ti) is fabricated by a simple hydrothermal process using hydrazine hydrate as a reduction agent. Its electrocatalytic activity towards cyclohexanol oxidation has been investigated by cyclic voltammetry (CV), chronoamperometry (CA), quasi-steady state polarization and electrochemical impedance spectroscopy (EIS). Effects of various parameters such as potential scan rate and cyclohexanol concentration on the electro-oxidation of cyclohexanol are investigated. Results show that the Ni/Ti electrode behaves as an efficient catalyst for the electro-oxidation of cyclohexanol in basic media and its electrocatalytic activity towards cyclohexanol oxidation is higher than a nickel oxyhydroxide modified nickel electrode (NOMN). It is confirmed that during the anodic potential sweep the electro-oxidation of cyclohexanol follows the formation of NiOOH on the electrode surface and is then catalysed by NiOOH. The rate-determining step for cyclohexanol oxidation is the reaction between the high oxidation state nickel (Ni³⁺) and the adsorbed cyclohexanol on the surface of the Ni/Ti.     

Oxygen Isotope Labeling Experiments Reveal Different Reaction Sites for the Oxygen Evolution Reaction on Nickel and Nickel Iron Oxides

Nickel iron oxide is considered a benchmark nonprecious catalyst for the oxygen evolution reaction (OER). However, the nature of the active site in nickel iron oxide is heavily debated. Here we report direct spectroscopic evidence for the different active sites in Fe‐free and Fe‐containing Ni oxides. Ultrathin layered double hydroxides (LDHs) were used as defined samples of metal oxide catalysts, and ¹⁸O‐labeling experiments in combination with in situ Raman spectroscopy were employed to probe the role of lattice oxygen as well as an active oxygen species, NiOO^?, in the catalysts. Our data show that lattice oxygen is involved in the OER for Ni and NiCo LDHs, but not for NiFe and NiCoFe LDHs. Moreover, NiOO^? is a precursor to oxygen for Ni and NiCo LDHs, but not for NiFe and NiCoFe LDHs. These data indicate that bulk Ni sites in Ni and NiCo oxides are active and evolve oxygen via a NiOO^? precursor. Fe incorporation not only dramatically increases the activity, but also changes the nature of the active sites.     

Enhancement of Oxygen Evolution Activity of Nickel Oxyhydroxide by Electrolyte Alkali Cations

Herein, the effect of the alkali cation (Li⁺, Na⁺, K⁺, and Cs⁺) in alkaline electrolytes with and without Fe impurities is investigated for enhancing the activity of nickel oxyhydroxide (NiOOH) for the oxygen evolution reaction (OER). Cyclic voltammograms show that Fe impurities have a significant catalytic effect on OER activity; however, both under purified and unpurified conditions, the trend in OER activity is Cs⁺ > Na⁺ > K⁺ > Li⁺, suggesting an intrinsic cation effect of the OER activity on Fe‐free Ni oxyhydroxide. In situ surface enhanced Raman spectroscopy (SERS), shows this cation dependence is related to the formation of superoxo OER intermediate (NiOO^?). The electrochemically active surface area, evaluated by electrochemical impedance spectroscopy (EIS), is not influenced significantly by the cation. We postulate that the cations interact with the Ni?OO^? species leading to the formation of NiOO^??M⁺ species that is stabilized better by bigger cations (Cs⁺). This species would then act as the precursor to O₂ evolution, explaining the higher activity.     

Ni/PdO/RuO_2复合型活性阴极的制备与表征

采用热分解氧化法,在Ni基体上制备以PdO为中间层、RuO2为活性层的Ni/PdO/RuO2复合型活性阴极,并通过XPS、XRD、能量色散X荧光(EDXRF)、SEM、极化曲线、循环伏安法和交流阻抗谱等表征其组成、结构与电化学性能。结果表明,Pd和Ru分别以PdO和RuO2的形式存在于Ni/PdO/RuO2复合型活性阴极中,其含量分别为1.25wt%和1.71wt%;在363K、11mol·L-1NaOH溶液、3kA·m-2电流密度下,Ni/PdO/RuO2复合型活性阴极的析氢过电位比Ni电极和Ni/RuO2电极分别低371和125mV;循环伏安法循环72h后,该复合型活性阴极双电层电容值减小30.6%,比Ni/RuO2电极表层结构更稳定;Ni/PdO/RuO2复合型活性阴极的表面粗糙度大且无明显的裂纹存在,与纯镍电极相比,该复合型活性阴极比表面积增加了31.12倍。     

Nickel foam as interlayer to improve the performance of lithium–sulfur battery

In this report, a porous, electronically conductive nickel foam foil (NFF), which is rolled for smooth surface, is introduced as an interlayer placed between the sulfur electrode and the separator to suppress the loss of active material and self-discharge behavior in lithium–sulfur (Li–S) systems. The electrodes are characterized by scanning electron microscopy (SEM), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and galvanostatic charge–discharge test. The cell with the rolled NFF interlayer shows superior performance in terms of capacity utilization, reversibility, and enhanced rate capability. It exhibits reversible discharge capacity of 604 mAh g^?1 after 80 cycles at 0.2 C, which is much higher than that of pristine sulfur without NFF (424 mAh g^?1). The improvement on electrochemical performance is attributed to the 3D architecture of nickel foam foil as lithium–sulfur batteries interlayer, which can provide a good conductive network with structural stability and the porous architecture accommodating the migrating polysulfide to reduce the shuttling phenomenon during the charge–discharge processes.     

Robust Polyoxometalate/Nickel Foam Composite Electrodes for Sustained Electrochemical Oxygen Evolution at High pH

The development of technologically viable electrodes for the electrochemical oxygen evolution reaction (OER) is a major bottleneck in chemical energy conversion. This article describes a facile one‐step hydrothermal route to deposit microcrystals of a robust Dexter–Silverton polyoxometalate oxygen evolution catalyst, [Co_6.8Ni_1.2W₁₂O₄₂(OH)₄(H₂O)₈], on a commercial nickel foam electrode. The electrode shows efficient and sustained electrochemical oxygen evolution at low overpotentials (360 mV at 10 mA cm⁻² against RHE, Tafel slope 126 mV dec⁻¹, faradaic efficiency (96±5) %) in alkaline aqueous solution (pH 13). Post‐catalytic analyses show no mechanical or chemical degradation and no physical detachment of the microcrystals. The results provide a blueprint for the stable “wiring” of POM catalysts to commercial metal foam substrates, thus giving access to technologically relevant composite OER electrodes.     

Graphene oxide decorated bimetal (MnNi) oxide nanoflakes used as an electrocatalyst for enhanced oxygen evolution reaction in alkaline media

Precious non-noble metals have been constantly attracting research attention in order to realize an inexpensive, extra active and more stable electrocatalysts in terms of various oxidation states and structures for their applications in oxidation (splitting) of water. In the present work graphene oxide incorporated, MnO₂-NiO composite metal oxide nanoflakes were synthesized on the stainless steel substrate using efficient electrodeposition route in alkaline media and drop casting method with further annealing treatment at 400 °C for 4 h. Initially MnO₂-NiO nanoflakes were deposited using different cyclic sweep rates, later graphene oxide suspension was drop casted on the MnO₂-NiO nanoflakes and subsequently subjected to annealing at 200 °C for 2 h. The prepared electrode material is denoted as GO/MnO₂-NiO/SS and used as an electrocatalyst for oxygen evolution. Field emission scanning electron microscopy, transmission electron microscopy, Energy dispersive electron spectroscopy and X-ray diffraction spectroscopy were used to study the crystalline nature and morphologies of the deposited films. The electrochemical properties of the electrode material were investigated using cyclic voltammetry and linear sweep voltammetry. The electrode exhibits low overpotential and small Tafel slope of 379 mV and 47.84 mVdec⁻¹ at the current density of 10 mA cm⁻² in alkaline (KOH) medium. In addition, the electrode shows a long time stability of 28800 s. Hence, the present study suggests that the GO incorporated Mn-Ni bimetal oxide modified electrode is suitable electrode material for oxygen evolution reaction (OER), owing to its facile preparation, inexpensive, easy handling and high active nature.     

Fast Modulation of d-Band Holes Quantity in the Early Reaction Stages for Boosting Acidic Oxygen Evolution

Synthesis of highly active and durable oxygen evolution reaction (OER) catalysts applied in acidic water electrolysis remains a grand challenge. Here, we construct a type of high-loading iridium single atom catalysts with tunable d-band holes character (h-HL−Ir SACs, ∼17.2 wt % Ir) realized in the early OER operation stages. The in situ X-ray absorption spectroscopy reveals that the quantity of the d-band holes of Ir active sites can be fast increased by 0.56 unit from the open circuit to a low working potential of 1.35 V. More remarkably, in situ synchrotron infrared and Raman spectroscopies demonstrate the quick accumulation of *OOH and *OH intermediates over holes-modulated Ir sites in the early reaction voltages, achieving a rapid OER kinetics. As a result, this well-designed h-HL−Ir SACs exhibits superior performance for acidic OER with overpotentials of 216 mV @10 mA cm⁻² and 259 mV @100 mA cm⁻², corresponding to a small Tafel slope of 43 mV dec⁻¹. The activity of catalyst shows no evident attenuation after 60 h operation in acidic environment. This work provides some useful hints for the design of superior acidic OER catalysts.