PEG-400 promoted Pd(OAc)2/DABCO-catalyzed cross-coupling reactions in aqueous media

PEG-400 [poly(ethylene glycol-400)] was found to improve the Pd(OAc)₂/DABCO-catalyzed aqueous Suzuki-Miyaura and Stille cross-coupling reactions. In the presence of Pd(OAc)₂, DABCO, and PEG-400, a variety of aryl halides were coupled with arylboronic acids or organotin compounds efficiently to afford the corresponding cross-coupled products in moderate to excellent yields. The turnover numbers was up to 900,000 for the Suzuki-Miyaura reaction and up to 9800 for the Stille reaction. The catalyst system was also effective for Heck and Sonogashira cross-coupling reactions to some extent.     

Pd-EDTA as an efficient catalyst for Suzuki-Miyaura reactions in water

PdCl₂-EDTA complex 1 is an efficient catalyst for the Suzuki-Miyaura reactions of aryl and heteroaryl halides with aryl(heteroaryl)boronic acids in water at 20-100 °C. Aryl iodides and bromides undergo the cross-coupling with turnover numbers (TON) up to 97,000 and turnover frequencies (TOF) up to 582,000 h⁻¹.     

Suzuki-Miyaura cross-coupling reaction of aryl chlorides with aryl boronic acids catalyzed by a palladium dichloride adduct of N-diphenylphosphanyl-2-aminopyridine

One palladium dichloride adduct of a phosphine-pyridine ligand N-diphenylphosphanyl-2-aminopyridine (L₁) [(L₁)PdCl₂] (1) has been prepared and structurally characterized. Compound 1 can be used as an effective catalyst for the Suzuki-Miyaura cross-coupling reactions of unreactive aryl chlorides with aryl boronic acids, and worked much better than its mono- or bidentate phosphine ligands. The reactions with a wide scope of substrates proceeded to give desired products in good to excellent yields.     

Efficient and rapid synthesis of regioselective functionalized potassium 1,2,3-triazoletrifluoroborates via 1,3-dipolar cycloaddition

In this study, we present a previously unreported method of preparing regiospecific organo-[1,2,3]-triazol-1-aryl-trifluoroborates from haloaryltrifluoroborates via a one-pot 1,3-dipolar cycloaddition reaction. We found that the use of either electron-rich or electron-deficient haloaryltrifluoroborates led to the desired cycloaddition products with good to excellent yields. Furthermore, we successfully carried out the cross-coupling reactions of the obtained triazoles with various aryl halides by means of the Suzuki-Miyaura reaction in the presence of 3 mol % of Pd(PPh₃)₄ catalyst in a 20% aqueous 1,4-dioxane solution at 100 °C; all these reactions yielded complete conversion to the corresponding products. Besides providing a high level of personnel safety, our highly versatile approach allows the preparation of functionalized organotrifluoborates containing 1,2,3-triazoles with retained functionality.     

Derivatization of a tris-oxazole using Pd-catalyzed coupling reactions of a 5-bromooxazole moiety

Modification at the C5 position of an oxazole ring contained in a 2,4-concatenated tris-oxazole by Pd-catalyzed coupling reactions was performed. Novel Pd-catalyzed amination and alkoxylation of a 5-bromooxazole derivative as well as Suzuki-Miyaura coupling and Migita-Stille coupling have been demonstrated. A wide variety of functional groups, including aryl, heteroaryl, primary and secondary amines, and phenol, were introduced in the 5-bromooxazole moiety in moderate to excellent yields using Pd(OAc)₂/S-PHOS or Pd(OAc)₂/X-PHOS as a catalyst.     

An inexpensive and highly stable ligand 1,4-bis(2-hydroxy-3,5-di-tert-butylbenzyl)piperazine for Mizoroki-Heck and room temperature Suzuki-Miyaura cross-coupling reactions

A bulky, inexpensive and simple bidentate ligand 1,4-bis(2-hydroxy-3,5-di-tert-butylbenzyl)piperazine (1) has been synthesized and characterized. The palladium catalyst was formed by combination of 1 with [Cl₂Pd(COD)] in a ratio of 1:1, tested in the Suzuki-Miyaura and Mizoroki-Heck cross-coupling reactions. Coupling of a variety of aryl bromides with phenylboronic acid using methanol as solvent at room temperature, or at 60 °C, gave generally high yields of coupled products. Coupling of aryl chlorides with organoboron reagent at 110 °C in DMF afforded good yields of biaryls under aerobic conditions. This non-phosphorus, air and moisture stable catalyst also displays good activity for Mizoroki-Heck coupling reaction in methanol at 60 °C with various aryl chlorides and bromides.     

The first use of porphyrins as catalysts in cross-coupling reactions: a water-soluble palladium complex with a porphyrin ligand as an efficient catalyst precursor for the Suzuki-Miyaura reaction in aqueous media under aerobic conditions

For the first time, a palladium complex with a porphyrin ligand is used as a catalyst precursor for cross-coupling reactions. The synthesis of a palladium complex with a phosphine-free and water-soluble potassium carboxylate salt of a porphyrin, and its evaluation in the Suzuki-Miyaura reaction of phenylboronic acid with aryl bromides (from electron-rich to electron-poor), in neat water, under aerobic conditions is described. Catalysis is performed at 100 °C for 4 h, using K₂CO₃ as base, and a substrate to catalyst molar ratio of 1000:1, leading to yields of coupling products in the range of 80-100%. The catalyst can be recycled and reused, but unfortunately, with a loss in activity.     

Iron pincer complex and its graphene oxide composite as catalysts for Suzuki coupling reaction

We report the synthesis of Fe-NCN pincer complex as homogenous catalyst and its composite by immobilizing the complex on amino functionalized graphene oxide as a heterogeneous catalyst for Suzuki coupling reactions. Both the complex and the composite were employed in catalyzing the Suzuki-Miyaura cross-coupling reaction between the aryl halide and phenyl boronic acid in acetonitrile solvent media with Cs₂CO₃ as a base. Effect of substitution over aryl halide was also investigated. Immobilization of the pincer complex had advantageous recovery and reuse of the catalyst as compared to its homogenous analog with no significant decrease in the catalytic efficiency.     

Design and synthesis of thioether-imidazolium chlorides as efficient ligands for palladium-catalyzed Suzuki-Miyaura coupling of aryl bromides with arylboronic acids

The catalyst composed of 0.25-0.025 mol % of [Pd(allyl)Cl]₂ and 0.5-0.05 mol % of the thioether-imidazolium chloride 3c was proven to be efficient in the Suzuki-Miyaura cross-coupling reactions of aryl bromides with arylboronic acids.     

用于Suzuki-Miyaura反应的阴离子交换树脂负载钯催化剂(英文)

以碱性阴离子交换树脂Amberlite IRA-900为载体,Pd(C3H5)(C5H5)为金属有机前体,采用金属有机气相沉积法在室温下制备了Pd@IRA-900多相催化材料.紫外-可见光谱分析证明前体和树脂骨架之间的化学作用以及树脂本身的孔道结构使得Pd纳米粒子均匀分散在载体上.透射电镜结果显示钯纳米粒子的平均尺寸为2.6 nm.在较温和的条件下Pd@IRA-900对多种卤代芳烃和苯硼酸的Suzuki偶联都具有良好的催化活性,并且催化剂重复使用5次之后依然具有很好的活性.此外,对树脂载体进行碱性交换处理后可得到一种双功能催化材料Pd@IRA-900(OH),该催化剂在不加入碱的条件下也可以催化碘苯和苯硼酸的Suzuki偶联反应.     

Pd(OAc)2/DABCO-catalyzed Suzuki-Miyaura cross-coupling reaction in DMF

The scope and limitations of the Pd(OAc)₂/DABCO (1,4-diaza-bicyclo[2.2.2]octane)-catalyzed Suzuki-Miyaura cross-coupling reactions have been demonstrated. The results showed that the effect of solvent had a fundamental influence on the reaction. In the presence of Pd(OAc)₂ and DABCO, both aryl bromides and aryl chlorides all worked well with arylboronic acids to form biaryls, heteroaryl-aryls, and biheteroaryls in moderate to excellent yields using DMF as the solvent. Additionally, the reactions of aryl bromides were conducted under relatively mild conditions.     

Asymmetric Suzuki-Miyaura cross-coupling of aryl chlorides with enhancement of reaction time and catalyst turnover

A series of new chiral phosphonite ligands were evaluated for the palladium-catalyzed asymmetric Suzuki-Miyaura cross-coupling reactions of aryl chlorides. Ligand 4 gave 91% yield and 78% ee with 0.5 mol % catalyst loading for the coupling of aryl boronic acid and aryl chloride in 5 h. When the catalyst loading was lowered to 0.1 mol % the same reaction gave 75% yield and 76% ee.     

Palladium(II)-N-heterocyclic carbene complex derived from proline towards Suzuki-Miyaura coupling reaction in water at room temperature

Palladium(II)-N-heterocyclic carbene complex 1 derived from proline has been proved to be a highly effective catalyst in the Suzuki-Miyaura coupling reaction of aryl iodides and bromides with arylboronic acids in water at room temperature. The reactions are tolerant towards various functional groups in the substrates. Moreover, the complex 1-catalyzed medium-scale (10.0 mmol) Suzuki-Miyaura reactions were also carried out and it was found that the complex was also effective enough in these cases.     

The highly efficient Suzuki-Miyaura cross-coupling reaction using cyclopalladated N-alkylferrocenylimine as a catalyst in aqueous medium at room temperature under ambient atmosphere

A series of N-alkyl-substituted cyclopalladated ferrocenylimines were used in palladium-catalyzed Suzuki-Miyaura cross-coupling reactions of aryl halides in room temperature and CH₃OH/H₂O media under aerobic conditions. As for the catalysts, the length of N-alkyl chains has no significant effect on the catalytic activity. Using 0.01 mol% of dimer 3a in the presence of K₂CO₃ as base offered excellent yields in the reaction of activated and non-activated aryl bromides with phenylboronic acid.     

Palladium-catalyzed Suzuki-Miyaura couplings of potassium aryl trifluoroborates with 4-tosyloxycoumarins or 4-tosyloxyquinolin-2(1H)-one

Pd(PPh₃)₄ catalyzed Suzuki-Miyaura cross-coupling reactions of 4-tosyloxycoumarins or 4-tosyloxyquinolin-2(1H)-one with various potassium aryl trifluoroborates afforded the corresponding 4-substituted coumarins or 4-substituted quinolin-2(1H)-ones in good to excellent yield.     

General and highly efficient fluorinated-N-heterocyclic carbene–based catalysts for the palladium-catalyzed Suzuki–Miyaura reaction

A general and highly efficient trifluoromethylated-N-heterocyclic carbene (NHC)-based catalyst for the palladium-catalyzed Suzuki–Miyaura reaction was reported. In the presence of the catalyst, reactions of non-activated aryl chlorides and triflates with aryl boronic acids occurred at room temperature with good to excellent yields (63–98%). In addition, catalysts generated from a combination of Pd(OAc)₂/imidazolium salt 6a is not only effective for the coupling of heteroaryl boronic acid with aryl halides and heteroaryl halides, but also efficient for coupling of other heteroaryl halides and heteroaryl boronic acids. Finally, the catalyst is highly effective for Suzuki–Miyaura reaction of aryl bromides and chlorides with 0.01–0.1 mol % loading if the temperature was raised at refluxed THF/H₂O.     

A highly efficient and recyclable NiCl2(dppp)/PEG-400 system for Suzuki-Miyaura reaction of aryl chlorides with arylboronic acids

Abstract

NiCl₂(dppp) in PEG-400 is shown to be a highly efficient catalyst for Suzuki-Miyaura coupling of aryl chlorides with arylboronic acids. The reaction could be conducted at 100?°C using K₃PO₄ as base, yielding a variety of biaryls in good to excellent yields. The isolation of the products was readily performed by extraction with petroleum ether and NiCl₂(dppp)/PEG-400 system could be easily recycled and reused up to five times without significant loss of activity. Our system not only avoids the use of easily volatile and toxic dioxane or toluene as a solvent but also solves the basic problem of nickel catalyst reuse.     

Room-temperature Ni0-catalyzed cross-coupling reactions of aryl arenesulfonates with arylboronic acids

Room-temperature Ni(0)-catalyzed cross-coupling reactions of aryl arenesulfonates with arylboronic acids are described. The Ni(0) catalyst, derived from Ni(COD)2 and PCy3, proved to be a general one for the Suzuki-Miyaura cross-coupling of a variety of aryl arenesulfonates. The mild reaction condition, the readily availability of the catalyst, and excellent coupling yields make aryl arenesulfonates potentially useful substrates in organic synthesis.     

Rh(I)-catalyzed cross-coupling reactions of alkenyl tosylates with potassium aryltrifluoroborates

RhCl(PPh₃)₃/DPPF was successfully employed as an efficient catalyst in the Suzuki-Miyaura cross-coupling reactions of potassium aryltrifluoroborates with alkenyl tosylates, affording the corresponding products in good to excellent yields.     

Synthesis and applications of polyvinylpyridine-grafted silica containing palladium nanoparticles as a new heterogeneous catalyst for heck and suzuki coupling reactions

A new catalytic system based on palladium nanoparticles supported on poly(4-vinylpyridine) (P4VPy)-grafted silica is introduced. Aminopropylsilica was reacted with acryloyl chloride to form acrylamidopropylsilica. Onto this functionalized silica, 4-vinylpyridine monomer was polymerized by free radical polymerization. The P4VPy-grafted silica was characterized by FT-IR spectroscopy and the amount of (P4VPy) grafted was determind by thermogravimetric analysis (TGA). The complexation of (P4VPy)-grafted silica with Pd(Cl)₂ was carried out to obtain the heterogeneous catalytic system. Transmission electron microscopy images (TEM) showed that palladium dispersed through polymer surface in nanoparticle size. This catalytic system exhibited excellent activity in cross-coupling reactions of aryl iodides, bromides and also chlorides, with olefinic compounds in Heck-Mizoraki, and with benzylbronic acid in Suzuki-Miyaura reactions. The use of aryl chlorides in cross-coupling reactions is usually hardly successful, but excellent results were gained in the presence of terta-n-butylammonium bromide (TBAB) as an additive. The turnover number (TON) of this catalyst reaches up to 9 × 10⁴ in these C-C bond forming reactions. High efficiency of the catalyst along with short reaction time, high yields, easy purification, recyclability, large scale synthesis and simple procedure are among the advantages of this catalytic system