Benzazole-N(SINGLE BOND)BH3 adducts. Reductive transposition of 2-benzimidazole, 2-benzothiazole,and 2-benzoxazole N(SINGLE BOND)BH3 adducts to 1,3,2-benzimidazaborole, 1,3,2-benzoxaborole,and 1,3,2-benzothiazaborole

1,3,2-Benzimidazaborole, 1,3,2-benzoxaborole, and 1,3,2-benzothiazaborole were synthesized from the corresponding 2-benzazole N(SINGLE BOND)BH₃ and 2-benzazole S(SINGLE BOND)BH₃ adducts through a reductive transposition from the isolobal fragment X(SINGLE BOND)C(sp²) (DOUBLE BOND) N(sp²) (SINGLE BOND) B(sp³) (X (DOUBLE BOND) N, O, S) to the fragment X(SINGLE BOND)B(sp²) (DOUBLE BOND) N(sp²) (SINGLE BOND) C(sp³). N(SINGLE BOND)BH₃ substitution shifts to lower frequencies 4-H, C-3a, and C-7a resonances. The X-ray diffraction analysis of 2-(o-methoxyphenyl)benzothiazole N(SINGLE BOND)BH₃ adduct is reported. Two new tetracyclic boron-bridged compounds were observed as by-products (6,9-(ethyl)-diaza-2-oxa-1-bora[3,4,7,8]-dibenzobycyclo[4.3.0]-nona-3,7-diene, 6d, and 8-aza-9-oxa-2-thia-1-bora-[3,4,7,8]dibenzobycyclo[3.4.0]nona-3,7-diene, 15d, when 2-(o-methoxyphenyl)-1-ethylbenzimidazole-BH₃ 6b and 2-(o-methoxyphenyl)-benzothiazole-BH₃ 15b adducts were heated. © 1996 John Wiley & Sons, Inc.     

取代环戊二烯的合成和^1HNMR谱

本文研究了苯基锂和对、间、邻甲苯基锂及对、邻甲氧苯基锂与6,6-二烷基富烯环外双键加成反应的立体效应。在室温下于乙醚溶剂中,6,6-二烷基富烯同上述芳基锂反应,形成取代环戊二烯基锂,经水解给出含或不含手性碳的叔烷基环戊二烯。     

The Synthesis of Mono- and Bi-Metallic Platinum(II) and/or (IV) Complexes Containing the Ligand Bis(diphenylphosphino) Methylamine

Complexes of the type [Pt R₂ (dppma-PP′)] (R─Me, Et, Ph, CH₂Ph, C₆H₄ Me-p, C₆H₄OMe-2, CH₂CMe₃, 1-naphthyl, C₆H₄Me-o, dppma = Ph₂PNMe PPh₂) have been prepared from [PtCl₂, (dppma-PP′)] and the corresponding alkyl-lithium or Grignard reagents. Equilibrium constants, k, for the conversion of [PtR₂ (dppma-PP′)] into cis-[PtR₂(dppma-P)₂] with dppma were studied using ³¹P NMR spectroscopy at room temperature. Equilibrium is rapidly established for R─C₆H₄-Me-o, at 20°C. Complex of the type cis-[PtR₂ (dppma-P)₂] was isolated R─C₆H₄ Me-o. The complexes [PtMe₂(dppma-P)₂] and [Pt(o-methoxyphenyl)₂(dppma-P)₂] were prepared, but unfortunately decomposed once isolated, the only evidence for its formation being from ³¹P-{¹H} NMZR spectroscopy. The o-tolyl or 1-naphthyl complexes exist as syn-anti mixtures in solution, due to restricted rotation around the platinum aryl bonds. Treatment of several complexes of the type [PtR₂(dppma-PP′)] with MeI gives [PtR₂Me(I)(dppma-PP′)] with trans addition of MeI. Treatment of [PtR₂(dppma-PP′)] with HCl gives [Pt Cl (R) (dppma-PP′)] for R─C₆H₂Me₃-2,4,6, C₆H₄-CH₃-2, C₆H₄-Me-4, Me, 1-naphthyl. The ¹H, ³¹P NMR parameters for these complexes are discussed. Attempted preparation of complexes of the type [PtR₂ (dppma-P)₂M] (R─C₆H₄-Me-2, Me CN-C₆H₄-Me-4); M─Pd, Pt, Au,) are reported.     

Rapid methylation on carbon frameworks useful for the synthesis of 11CH3-incorporated PET tracers: Pd(0)-mediated rapid coupling of methyl iodide with an alkenyltributylstannane leading to a 1-methylalkene

The Pd(0)-mediated rapid coupling of methyl iodide with an excess of alkenyltributylstannane was examined with the aim of incorporating a short-lived 11C-labeled methyl group into a biologically significant organic compound with a 1-methylalkene unit for the synthesis of a PET tracer. Four sets of reaction conditions (A-D) were used, all performed in DMF at 60 degrees C for 5 min. Condition B, using CH3I/stannane/Pd2(dba)3/P(o-tolyl)3/CuCl/K2CO3 (1:40:0.5:4-6:2:5), works well in almost all cases. Condition D, using CH3I/stannane/Pd2(dba)3/P(o-tolyl)3/CuX (X = Br, Cl, or I)/CsF (1:40:0.5-5:2-20:2-20:5-50), shows the best results with regard to general applicability to tin substrates, affording the corresponding methylated product in >90% yield based on consumption of methyl iodide. P(t-Bu)2Me was less effective than P(o-tolyl)3, particularly for alpha,beta-unsaturated carbonyl substrates. No regio- or stereoisomerization occurred under these reaction conditions. The efficiency of the protocol was demonstrated by synthesis of an 11C-methylated compound.     

Reaction of aminoquinolines with methyl acrylate and transformations of some of the products obtained

3H,4H-Quino[1,2-a]-2-pyrimidone, 1-(2-carboxyethyl)aminoquinolinium betaines, and methyl esters of N-quinolinyl--alanines were isolated from the reactions of aminoquinolines with methyl acrylate. Hydrolysis of the latter yielded the corresponding amino acids, two of which were converted to 1-(3- and 6-quinolinyl)dihydrouracils, and the latter was reduced to 1-(6-quinolinyl)-2-oxohexahydropyrimidine.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 4, pp. 482–486, April, 1971.     

Structure and properties of perimidine and its derivatives

The electronic absorption spectra, luminescence spectra, and vibrational spectra of perimidine and its derivatives have been studied. On the basis of the dipole moments and vibrational spectra, the conformations of 2-(o-hydroxyphenyl)perimidine and 2-(o-hydroxyphenyl)perimidine and 2-(o-methoxyphenyl)perimidine, which are stabilized by intramolecular hydrogen bonds, have been established. The electronic configurations of the perimidines in the ground and first excited states have been calculated by Hückel's MO method. The results have been compared with data on the reactivity and electronic absorption spectra of the perimidines.     

Mechanistic studies of the copolymerization reaction of aziridines and carbon monoxide to produce poly-beta-peptoids

The coupling of carbon monoxide and aziridines has been shown to be selective for comonomer-alternating enchainment in the presence of PhCH2C(O)Co(CO)4 to afford poly-beta-peptoids. In this article, we have investigated the mechanistic aspects of the reaction of CO and N-butylaziridine by means of in situ infrared spectroscopy employing CH3C(O)Co(CO)3L (L = PPh3 (1) and P(o-tolyl)3 (2)) as precatalysts. Precatalyst 1 exists in solution under catalytic conditions as an equilibrium mixture of 1 and CH3C(O)Co(CO)4, and affords both poly-beta-butylalanoid and the corresponding lactam. By way of contrast, precatalyst 2 which possesses the sterically bulky and labile P(o-tolyl)3 ligand, affords only the acyl cobalt tetracarbonyl species in solution during catalysis with concomitant selective production of the copolymer. Kinetic studies conducted with precatalyst 2 showed the coupling reaction to have a first order dependence on catalyst, a first order dependence on N-butylaziridine, and only a slight dependence on the concentration of CO over the pressure range 17-69 bar. The working mechanistic model for the copolymerization reaction involves first aziridine insertion into the cobalt-acyl bond, rate determining ring opening by the cobaltate species, followed by the migratory CO insertion.     

Influence of intramolecular hydrogen bonds on the tautomeric equilibrium of 1,3-diketones

The paper deals with a quantitative characterization of the influence of multiple intramolecular hydrogen bonds on the tautomeric equilibrium of 1,3-diketones by means of NMR-spectroscopy. The contents of the keto- and two enol forms of 1-(o-hydroxyphenyl) -1,3-butandione and 1-(o-methoxyphenyl)-1,3-butandione in tetrachloromethane, deuterochloroforme, acetone-d₆ and acetonitrile-d₃ are compared.The intramolecular hydrogen bond between the phenolic hydroxyl group and the aromatic carbonyl group in 1-(o-hydroxyphenyl)-1,3-butandione shifts are keto-enol equilibrium toward the keto-tautomer and enol-enol equilibrium toward the tautomer with an enolized aliphatic carbonyl group.     

Metastable ion and induced stable ion fragmentation of isomeric 5-methyl-3-tolyl-1,2,4-oxadiazoles

The electron ionization fragmentation patterns of 5-methyl-3-(o-, m- and p-tolyl)-1,2,4-oxadiazoles (1a—c) have been examined by metastable ion and high resolution mass spectrometry. The o-tolyl isomer loses CO and C₂H₂O from the metastable molecular ion whereas the m- and p-tolyl isomers lose only CH₃CN thus indicating a strong ortho effect in directing the fragmentation in 1a. Slight differences between o-, m- and p-tolyl isomers in the collisional activation fragmentation of stable [C₇H₆N]⁺ ions suggest that structural differences exist even after a series of extensive rearrangements of the molecular ions. Metastable ion kinetic energy (MIKE) and collisional activation (CA) spectra were very helpful in providing valuable information about many fragments.     

{[P(o-tolyl)3]Br}2[Cu2Br6](Br2)--an ionic compound containing molecular bromine

Dark green cuboid-shaped crystals of the composition {[P(o-tolyl) 3]Br} 2[Cu 2Br 6](Br 2) are obtained by the reaction of P(o-tolyl) 3 and CuBr 2 with Br 2 in the ionic liquid [NMeBu 3][N(Tf) 2]. The bromocuprate crystallizes triclinic [space group P1; Z = 1; a = 10.667(2) A; b = 10.695(2) A; c = 11.582(2) A; alpha = 74.42(3) degrees ; beta = 75.64(3) degrees ; and gamma = 85.68(3) degrees ]. The title compound is constituted of {[P(o-tolyl) 3]Br} (+) cations and [Cu 2Br 6] (2-) anions and contains molecular dibromine [d Br-Br = 2.341(1) A]. The latter is verified by thermogravimetry and mass spectrometry.     

卟啉化合物的热化学研究——Ⅵ. 四苯基卟啉化合物的标准燃烧能和生成焓

用中国计量科学院提供的量热基准苯甲酸标定了本实验室建立的精密静弹燃烧热量计,测定了四邻甲氧基苯基卟啉(T_(o—OCH_3)PP)和四对二甲氨基苯基卟啉(T_(p—N(CH_3)_2)PP)的标准燃烧能,并计算出标准生成焓。实验仪器等温环境潜水式静弹燃烧热量计,量热环境主要包括恒温水槽和量热筒外套两部分,水槽中的两个泵式搅拌器能使水槽中的水充分搅动。量热体系包括量热筒、筒内定量的水、氧弹、内加热器、内搅拌器、热敏电阻测温探头以及一支辅助检测温度计。量热     

Reactivity and properties of [-O-Bi(III...)O=Mo-]n chains

A coordination polymer [Cp(O)2Mo-O-Bi(o-tolyl)2]n, II, containing Mo-O-Bi and Mo=O...Bi moieties was investigated with respect to its behavior in contact with OH- and Cp2MoH2 and as potential single source precursor in the polyol method. It turned out that hydroxide as a base breaks up the polymer to yield CpMoO3- and (o-tolyl)2BiOH. The latter polymerizes to give the coordination polymer [(o-tolyl)2BiOH]n, 1. Alternatively, 1 can be prepared by reacting [(o-tolyl)2Bi(hmpa)2]SO3CF3 with NBu4OH/H2O in thf/water. If, however, NBu4OH/MeOH is used in dichloromethane as the solvent, the (o-tolyl)2BiOH formed intermediately undergoes methanolysis, and finally, [(o-tolyl)2BiOMe]n, 3, is isolated. Although 1 and 3 are very similar compounds, their crystal structures differ significantly: while the structure of 1 is dominated by secondary bonding leading to seesaw-type coordination geometries around the Bi centers, the Bi atoms in 3 are coordinated in a distorted tetrahedral fashion, and secondary bonding plays only a minor role. If 1 is dissolved in a nonpolar, nonprotic solvent, condensation reactions occur immediately leading to [(o-tolyl)2BiOBi(o-tolyl)2], 2, which can be obtained on a preparative scale this way. Compound 3 which can be prepared in good yields may prove to be a useful starting material in bismuth chemistry. Here, it was shown to react with molybdocene dihydrides to provide stable Bi-substituted molybdocene monohydrides [(R)Cp2Mo(H)(Bi(o-tolyl)2)] (R = Me 4, R = H 5); compounds of that type were identified in solution before but had so far eluded isolation. Compound 4, whose crystal structure is discussed, also forms when II is treated with methylated molybdocene dihydride. This obviously leads to the formation of Mo-Bi bonds (--> 4), as well as Mo-OH units, which undergo condensation reactions leading to Mo-O-Mo moieties (i.e., [Cp2Mo2O5] is formed as a byproduct). The use of II as precursor in the polyol method successfully led to bismuthmolybdate nanoparticles (accompanied by crystallites); however, no single phase is obtained, but biphasic materials consisting of Bi(2)Mo2O9 and Bi2MoO6, whose ratio can be determined by the choice of the hydrolyzing reagent, are formed instead. One of these materials proved to be capable of sensing EtOH selectively at elevated temperatures.     

Synchronized fluxional motion and cyclometalation of ligands in platinum(II) complexes

Oscillation of the 2,9-dimethyl-1,10-phenanthroline (dmphen) ligand between nonequivalent exchanging sites in [Pt(Me)(dmphen)(P(o-tolyl)3)]+ and phosphane rotation around the Pt-P bond take place at the same rate. Thus, this cationic complex behaves as a molecular gear, exhibiting a fascinating synchronism between two otherwise independent fluxional motions. The process (DeltaG(3330)(#) = 68.5 +/- 0.2 kJ mol(-1)) was found to be unaffected by (i) the nature of various counteranions (X = PF6- 1, SbF6- 2, CF3SO3- 3, BF4- 4, BArf- 5), (ii) the polarity or the electron-donor properties of the solvent and, (iii) the addition of weak nucleophiles. Restricted phosphane rotation around the Pt-P bond impedes free dmphen oscillation in a 14-electron three-coordinate T-shaped intermediate, containing eta1-coordinated dmphen, generated by easy Pt-N bond dissociation from [Pt(Me)(dmphen)(P(o-tolyl)3)]+. 1-5 undergo easy orthoplatination, leading to new [Pt(dmphen){CH2C6H4P(o-tolyl)2-kappaC,P}]X cyclometalated Pt(II) compounds (X = PF6- 1, SbF6- 2, CF3SO3- 3, BF4- 4, BArf- 5). The kinetics of the cyclometalation of 3 and 4 were followed in tetrachloroethane by both 1H NMR and spectrophotometric techniques (kobs = 1.7 x 10-4 s(-1) at 333 K, DeltaH = 59.3 +/- 3 kJ mol(-1), and DeltaS = -141 +/- 8 J K(-1) mol(-1)). Ring opening of dmphen is again a prerequisite for C-H bond activation, which takes place through a multistep oxidative-addition reductive-elimination pathway. The molecular structure of cyclometalated 10 shows a butterfly shape with two o-tolyl rings projected above and below the coordination plane. Variable-temperature 1H NMR spectra revealed hindered rotation around the P-Cipso(o-tolyl) bonds at rather mild temperatures (DeltaG(3330)(#) = 55.2 +/- 0.4 kJ mol(-1)). Dmphen oscillation results very slowly and is dependent on the nature of the counteranions, of the solvents, and is strongly accelerated by the presence of weak nucleophiles that act as catalysts, according to an associative mode of activation.     

Synthesis and Characterization of Dihydrouracil Analogs Utilizing Biginelli Hybrids

Dihydrouracil presents a crucial intermediate in the catabolism of uracil. The vital importance of uracil and its nucleoside, uridine, encourages scientists to synthesize novel dihydrouracils. In this paper, we present an innovative, fast, and effective method for the synthesis of dihydrouracils. Hence, under mild conditions, 3-chloroperbenzoic acid was used to cleave the carbon–sulfur bond of the Biginelli hybrids 5,6-dihydropyrimidin-4(3H)-ones. This approach led to thirteen novel dihydrouracils synthesized in moderate-to-high yields (32–99%).     

Maleanilic Acids as Highly Selective Reagents for the Amperometric Determination of Thorium (IV)

Abstract

Thorium has been determined amperometrically at an applied e. m. f. of -1.2V with fifteen maleanilic acids. Out of these o-tolyl, p-tolyl, 1-naphthyl, 2-naphthyland 4-amino maleanilic acid were found promising analyticalreagentsand most effective. Th(IV) in the range 6.60 to 2350.0 mg per 100 ml can be determined with an error of ± 0.2%. The interference of fifty-five ions were studied and only five ions Zn(II), Pb(II), Fe(III), UO₂ (II) and Zr(IV) interfered. which could be masked by the addition of S₂O² ₃ or SCN^?, Cl^? or SO^2- ₄, SCN^? or citrate, citrate or tartrate and P₂O^4- ₇ respectively.     

Facile palladium(0)-catalyzed ring expansion reactions of hydroxy methoxyallenyl cyclic compounds via hydropalladation

Palladium(0)-catalyzed one-atom ring expansion of various hydroxy methoxyallenyl compounds has been achieved in excellent yields without the use of aryl halides. Hydroxy methoxyallenylisoindolinones, -indanones, and -phthalans have been readily converted to the corresponding isoquinolones, naphthoquinones, and isochromanones in the presence of P(o-tolyl)(3).     

Synthesis of tetraorgano-substituted silanes with the benzo[b]thiophene moiety

Catalytic dehydrocyclization of dimethyl(o-tolyl)- and dimethyl-4-(m-xylyl)-(benzo[b]thien-2-yl) silanes has given 11,11-dimethyl and 8,11,11-trimethyl-6,11-dihydro-11-silabenzo[b]naphtho[2,3-d]thiophenes, which were oxidized to the ketones. Previously unknown diorganobis(benzo[b]thien-2-yl)silanes have been obtained.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 419–422, March, 1989.     

Synthesis and reactions of optically pure cyclohexyl(o-methoxyphenyl)phosphine-borane and t-butyl-(o-methoxyphenyl)phosphine-borane

Cyclohexyl(o-methoxyphenyl)menthyloxyphosphineborane and t-butyl(o-methoxyphenyl)menthyloxyphosphine-borane were prepared from dichlorocyclohexylphosphine and t-butyldichlorophosphine by successive treatments with (−)-menthol, o-methoxyphenylmagnesium bromide, and borane-THF complex. The separated pure diastereomers of each of the compounds underwent reaction with lithium naphthalenide to afford optically pure cyclohexyl(o-methoxyphenyl)phosphine-borane and t-butyl(o-methoxyphenyl)phosphine-borane, respectively. These secondary phosphine-boranes reacted readily with various electrophiles in the presence of bases with virtually net retention of configuration. A new chiral phosphine ligand, (S,S)-1,2-bis[cyclohexyl(o-methoxyphenyl)phosphino]ethane was synthesized via the optically pure phosphine-boranes.     

Structure of 3-(o-hydroxyphenyl) derivatives of 2-quinoxalone and 2-benzoxazinone

It is shown by IR and UV spectroscopy that the products of the reaction of o-hydroxybenzoylformic acid with o-phenylenediamine and o-aminophenol have the 3-(cyclohexa-3,5-dien-2-onylidene)quinoxalone structure rather than the 3-(o-hydroxyphenyl)-2-quinoxalone structure. 3-(o-Methoxyphenyl)-2-quinoxalone and 3-(o-methoxyphenyl)-3,4-dihydro-2H-benzo-1,4-oxazin-2-one were synthesized as model compounds.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 8, pp. 1126–1128, August, 1977.