General and highly efficient fluorinated-N-heterocyclic carbene–based catalysts for the palladium-catalyzed Suzuki–Miyaura reaction

A general and highly efficient trifluoromethylated-N-heterocyclic carbene (NHC)-based catalyst for the palladium-catalyzed Suzuki–Miyaura reaction was reported. In the presence of the catalyst, reactions of non-activated aryl chlorides and triflates with aryl boronic acids occurred at room temperature with good to excellent yields (63–98%). In addition, catalysts generated from a combination of Pd(OAc)₂/imidazolium salt 6a is not only effective for the coupling of heteroaryl boronic acid with aryl halides and heteroaryl halides, but also efficient for coupling of other heteroaryl halides and heteroaryl boronic acids. Finally, the catalyst is highly effective for Suzuki–Miyaura reaction of aryl bromides and chlorides with 0.01–0.1 mol % loading if the temperature was raised at refluxed THF/H₂O.     

Reductive carbonylation of aryl and heteroaryl iodides using Pd(acac)2/dppm as an efficient catalyst

Palladium catalyzed simple and efficient protocol for reductive carbonylation of aryl and heteroaryl compounds has been developed. The formylation of aryl and heteroaryl iodides takes place in the presence of Pd(acac)₂/dppm catalyst at 10 bar pressure of synthetic gas to give the desired aromatic and heteroaromatic aldehydes in good to excellent yields. Easy work-up, stability of the catalyst, low catalyst loading and less reaction time are the advantages of this method.     

A General Palladium‐Catalyzed Hiyama Cross‐Coupling Reaction of Aryl and Heteroaryl Chlorides

A general palladium‐catalyzed Hiyama cross‐coupling reaction of aryl and heteroaryl chlorides with aryl and heteroaryl trialkoxysilanes by a Pd(OAc)₂/ L2 catalytic system is presented. A newly developed water addition protocol can dramatically improve the product yields. The conjugation of the Pd/ L2 system and the water addition protocol can efficiently catalyze a broad range of electron‐rich, ‐neutral, ‐deficient, and sterically hindered aryl chlorides and heteroaryl chlorides with excellent yields within three hours and the catalyst loading can be down to 0.05 mol % Pd for the first time. Hiyama coupling of heteroaryl chlorides with heteroaryl silanes is also reported for the first time. The reaction can be easily scaled up 200 times (100 mmol) without any degasification and purification of reactants; this facilitates the practical application in routine synthesis.     

One pot Pd(OAc)2-catalysed 2,5-diarylation of imidazoles derivatives

The regioselective 2- or 5-arylation of imidazole derivatives with aryl halides using palladium catalysts has been described in recent years; whereas the arylation at both C2 and C5 carbons of imidazoles in high yields has not been performed. We found conditions allowing the access to these 2,5-diarylimidazoles via a one pot reaction. The choice of the base was found to be crucial to obtain these products in high yields. Using CsOAc as the base, DMA as the solvent and only 2 mol % of the phosphine-free Pd(OAc)₂ the catalyst, the target 2,5-diarylated imidazoles were obtained in moderate to good yields with a wide variety of aryl bromides. Substituents such as fluoro, trifluoromethyl, formyl, acetyl, propionyl, ester, nitro or nitrile on the aryl bromide were tolerated. Sterically congested aryl bromides or heteroaryl bromides can also be employed. Surprisingly the nature of the substituent at position 1 on the imidazole derivative exhibits a huge influence on the reaction.     

An efficient and mild ortho-zincation of aromatics and heterocycles by using TMP2Mg·2LiCl in the presence of ZnCl2

A variety range of functionalized aryl and heteroaryl zinc reagents were efficiently generated by using TMP₂Mg·2LiCl (TMP = 2,2,6,6-tetramethylpiperamidyl) in the presence of ZnCl₂. The subsequently functionalization gave after reaction with electrophiles the expected polyfunctionalized products in good yields. A detailed study concerned on the point how we found the protocol and how we optimized it was depicted.     

A highly efficient memantine-modified palladium catalyst for Suzuki–Miyaura cross-coupling reaction

A new simple Pd(memantine)₂Cl₂ complex was synthesized and characterized by ¹H NMR, ¹³C NMR and X-ray single crystal structure determination. The Suzuki–Miyaura reaction of aryl bromides catalyzed by Pd(memantine)₂Cl₂ complex was investigated in air with different temperature. The high turnover numbers of 650,000 have been obtained in the reaction of 4-bromonitrobenzene with phenylboronic acid at 80 °C. At room temperature, the complex also showed high activity for Suzuki–Miyaura cross-coupling reaction of aryl bromides with a wide range of functional groups under air, and the turnover number of up to 99,000 was achieved. The catalytic system also gives good yields toward the reaction of several heteroaryl bromides with thiophenylboronic acid.     

New Pyrazolyl‐Nicotinic Acids,Methyl Esters,and 1,3,4‐Oxadiazolyl‐pyrazolyl‐pyridine Tricyclic Scaffold Derivatives from 6‐Hydrazinylnicotinic Acid Hydrazide Hydrate

This paper describes an efficient approach for the synthesis of a new series of 6‐[3‐alkyl(aryl/heteroaryl)‐5‐trifluoromethyl‐1H‐pyrazol‐1‐yl]nicotinic acids (where alkyl = CH₃; aryl = Ph, 4‐OCH₃Ph, 4,4′‐BiPh; and heteroaryl = 2‐Furyl) from the hydrolysis reaction of alkyl(aryl/heteroaryl)substituted 2‐(5‐trifluoromethyl‐5‐hydroxy‐4,5‐dihydro‐1H‐pyrazol‐1‐yl)‐5‐(5‐trifluoromethyl‐5‐hydroxy‐4,5‐dihydro‐1H‐1‐carbonylpyrazol‐1‐yl)pyridines, under basic conditions and at 70–95% yields. In a subsequent step, the esterification reaction of pyrazolyl‐nicotinic acids done in thionyl chloride and methanol led to the isolation of a series of methyl 6‐[alkyl(aryl/heteroaryl)‐5‐trifluoromethyl‐1H‐pyrazol‐1‐yl] nicotinates as stable hydrochloride salts at 64–84% yields, which could be easily converted to hydrazides to give new oxadiazolyl‐pyrazolyl‐pyridine tricyclic scaffolds at good yields from a [4 + 1] cyclocondensation reaction with 1,1,1‐triethoxyethane and 1‐(triethoxymethyl)benzene as the reagent/solvent.     

Benzylation of arenes through FeCl3-catalyzed Friedel-Crafts reaction via C-O activation of benzyl ether

Various benzyl ethers were converted to benzyl arenes via a FeCl₃-catalyzed Friedel-Crafts alkylation reaction under mild condition in good yields. This method also offered a simple and practical approach to synthesize di- or tri-aryl methanes and aryl heteroaryl methanes through the activation of C-O bonds.     

Palladium-catalyzed Suzuki–Miyaura cross-coupling reaction of potassium 2-pyridyl trifluoroborate with aryl (heteroaryl) halides

Palladium-catalyzed Suzuki–Miyaura cross-coupling reaction of potassium pyridine-2-trifluoroborates and various aryl (heteroaryl) halides can generate the corresponding desired coupling products with moderate to good yields. It can be carried out under the conditions with ethanol as solvent, Pd(OAc)₂ and SPhos as catalyst system and Na₂CO₃ as a base.     

2-Hydroxyethylammonium acetate: A reusable task-specific ionic liquid promoting one-pot,three-component synthesis of 2-amino-3,5-dicarbonitrile-6-thio-pyridines

2-Hydroxyethylammonium acetate (2-HEAA) as a task-specific ionic liquid, efficiently promotes one-pot three-component reaction of aryl/heteroaryl/alkyl aldehydes with aryl/alkyl thiols and malononitrile at room temperature. This protocol offers several advantages such as using a reusable and cost-effective ionic liquid, being amenable to scale-up and produces the corresponding 2-amino-3,5-dicarbonitrile-6-thio-pyridines in a short reaction time (5 min) and in good to high yields.     

Generation of Aryl and Heteroaryl Magnesium Reagents in Toluene by Br/Mg or Cl/Mg Exchange

The alkylmagnesium alkoxide sBuMgOR?LiOR (R=2‐ethylhexyl), which was prepared as a 1.5 m solution in toluene, undergoes very fast Br/Mg exchange with aryl and heteroaryl bromides, producing aryl and heteroaryl magnesium alkoxides (ArMgOR?LiOR) in toluene. These Grignard reagents react with a broad range of electrophiles, including aldehydes, ketones, allyl bromides, acyl chlorides, epoxides, and aziridines, in good yields. Remarkably, the related reagent sBu₂Mg?2 LiOR (R=2‐ethylhexyl) undergoes Cl/Mg exchange with various electron‐rich aryl chlorides in toluene, producing diorganomagnesium species of type Ar₂Mg?2 LiOR, which react well with aldehydes and allyl bromides.     

An efficient and regioselective synthesis of 1,1′-oxalylbis[3-(alkyl/aryl/heteroaryl)-5-(trihalomethyl)-1H-pyrazoles] from 4-alkoxy-1,1,1-trihaloalk-3-en-2-ones

Abstract  

This work describes the regioselective synthesis of two new series of 1,1′-oxalylbis[3-(alkyl/aryl/heteroaryl)-4,5-dihydro-5-hydroxy-5-(trihalomethyl)-1H-pyrazoles], where the 3-substituents are H, Me, C₆H₅, 4-FC₆H₄, 4-ClC₆H₄, 4-BrC₆H₄, 4-NO₂C₆H₄, 4,4′-BiPh, and 2-furyl, in a one-pot methodology with ethanol as solvent, from the reaction of 4-alkoxy-4-(alkyl/aryl/heteroaryl)-1,1,1-trihaloalk-3-en-2-ones with oxalyldihydrazide (51–89%). Complementarily, the dehydration reactions of five examples of the described oxalylbispyrazolines are also reported, which furnished the respective 1,1′-oxalylbis[3-(alkyl/aryl/heteroaryl)-5-(trihalomethyl)-1H-pyrazoles] in 53–78% yields without the two C(O)–N bond cleavages.     

Pd-EDTA as an efficient catalyst for Suzuki-Miyaura reactions in water

PdCl₂-EDTA complex 1 is an efficient catalyst for the Suzuki-Miyaura reactions of aryl and heteroaryl halides with aryl(heteroaryl)boronic acids in water at 20-100 °C. Aryl iodides and bromides undergo the cross-coupling with turnover numbers (TON) up to 97,000 and turnover frequencies (TOF) up to 582,000 h⁻¹.     

Oxidative addition of heteroaromatic halides to Negishi reagent and subsequent cross-coupling reactions

Heteroarylzirconocene halides were prepared via the oxidative addition of heteroaryl halides to the Negishi reagent ‘Cp₂ZrBu₂’. The palladium-catalyzed cross-coupling of the in situ generated organozirconium reagents with functionalized aryl and heteroaryl halides proceeded smoothly in the presence of CuCl to produce the cross-coupling products in high yields.     

Direct arylation of oxazole and benzoxazole with aryl or heteroaryl halides using a palladium-diphosphine catalyst

Through the use of PdCl(dppb)(C₃H₅) as a catalyst, a range of aryl bromides and chlorides undergoes coupling via C-H bond activation/functionalization reaction with oxazole or benzoxazole in good yields. This air-stable catalyst can be used at low loadings with several substrates. Surprisingly, better results in terms of substrate/catalyst ratio were obtained in several cases using electron-excessive aryl bromides than with the electron-deficient ones. This seems to be mainly due to the relatively low thermal stability of some of the 2-arylbenzoxazoles formed with electron-deficient aryl halides. With these substrates, in order to obtain higher yields of product, the reactions had to be performed at a lower temperature (100-120 °C) using a larger amount of catalyst. On the other hand, in the presence of the most stable products, the reactions were performed at 150 °C using as little as 0.2 mol% catalyst. Arylation of benzoxazole with heteroaryl bromides also gave the coupling products in moderate to high yields using 0.2-5 mol% catalyst. With this catalyst, electron-deficient aryl chloride such as 4-chlorobenzonitrile, 4-chloroacetophenone or 2-chloronitrobenzene have also been used successfully.     

An efficient synthesis of 6H,7H-chromeno[4,3-b]chromenes and 6,7-dihydrothio chromeno[3,2-c]chromenes as 9-substituted xanthene like analogs

An efficient synthetic route with good overall yields to access 7-aryl/heteroaryl/alkyl substituted 6H,7H-chromeno[4,3-b]chromene, and 6,7-dihydrothiochromeno[3,2-c]chromene scaffolds has been developed. The route to these xanthene-like analogs involves a three-step reaction sequence: (1) Michael addition of readily available phenol and thiophenol to 4-chloro-2,2-dimethyl-2H-chromene-3-carbaldehyde, (2) Grignard reaction of different aryl, heteroaryl and alkyl magnesium bromides on the resulting carbaldehydes followed by (3) FeCl₃ catalyzed spontaneous intramolecular Friedel-Craft’s reaction on the diarylmethyl carbinols.     

Novel synthesis of tetrahydro-β-carbolines and tetrahydroisoquinolines via three-component reaction using hexagonally ordered mesoporous AlSBA-15 catalysts

Tryptamine, aryl aldehyde, and benzyl chloride undergo smooth coupling using well-ordered mesoporous AlSBA-15 catalyst with hexagonal porous structure in acetonitrile at 80 °C to furnish tetrahydrocarbolines in good yields with a high selectivity. This reaction also proceeds with homoveratrylamine to give the corresponding tetrahydroisoquinolines. A variety of aryl and heteroaryl aldehydes have also been used for producing tetrahydrocarbolines in high yields. This AlSBA-15-promoted Pictet-Spengler reaction provides a mild alternative to the traditional Brönsted or Lewis acids typically employed for the preparation of tetrahydrocarbolines and tetrahydroisoquinolines.     

Cobalt‐Catalyzed Intermolecular C(sp2)O Cross‐Coupling

Cobalt(II)‐catalyzed C(sp²)?O cross‐coupling between aryl/heteroaryl alcohols and vinyl/aryl halides in the presence of Cu^I has been achieved under ligand‐free conditions. In this reaction, copper plays a significant role in transmetalation rather than being directly involved in the C?O coupling. This unique Co/Cu‐dual catalyst system provides an easy access to a library of aryl–vinyl, heteroaryl–styryl, aryl–aryl, and heteroaryl–heteroaryl ethers in the absence of any ligand or additive.     

Pd/Cu bimetallic co-catalyzed direct 2-arylation of benzoxazole with aryl chloride

An efficient Palladium/Copper bimetallic co-catalyzed direct 2-arylation of benzoxazoles with aryl chlorides is presented. The Pd(OAc)₂/CuI/NiXantphos-based catalyst enables the installation of various aryl and heteroaryl groups in good to excellent yields (75–99%). Preliminary mechanism investigation indicates that Pd/Nixantphos complex activates C-Cl bond of aryl chlorides via oxidative addition, and Cu/Nixantphos complex chelates with nitrogen atom to lower the pK_a of the 2-H in benzoxazoles.     

CuBr2‐Promoted Multicomponent Aerobic Reaction for the Synthesis of 1,2,3‐Triaroylindolizines

An efficient synthesis of 1,2,3‐triaroylindolizines has been developed via CuBr₂‐promoted reaction of three molecules of aromatic methyl ketones and one molecule of pyridine derivative. A wide range of methyl aryl ketones and methyl heteroaryl ketones took part in the reaction and generate 1,2,3‐triaroylindolizines in good yields. This protocol also features such advantages as mild reaction conditions and high atom economy and step economy.