Synthesis of mono and doubly alkynyl substituted ferrocene and its crystal engineering using -C-H···O supramolecular synthon

Mono and doubly alkynyl substituted ferrocene complexes, [Fc(CH₂OCH₂CCH)_n], 2-3 (2: n = 1; 3: n = 2; Fc = ferrocene) have been synthesized from the room temperature reaction of mono and 1,1′-dihydroxymethyl ferrocene, Fc(CH₂OH)_n , 1a-b (1a: n = 1; 1b: n = 2) and propargyl bromide, in modest to good yields. These new ferrocene derivatives have been characterized by mass, IR, ¹H, ¹³C NMR spectroscopy, and molecular structures of compound 2 and 3 were unequivocally established by single crystal X-ray diffraction study. The crystal structure analysis revealed that 2 and 3 consist of infinite 1D zig-zag hydrogen bonded chains and 2D microporous hydrogen bonded network of molecules, linked by intermolecular C-H···O hydrogen bonding. The molecular structures of both 2 and 3 are further stabilized by C-H···π interactions.     

Two-stage formation of chloro (N-o-chlorobenzamido-meso-tetraphenylporphyrinato) zinc(II) methylene chloride solvate: Zn(N-NHCO(o-Cl)C6H4-tpp)Cl · CH2Cl2

The coordinating properties of N-o-chlorobenzamido-meso-tetraphenylporphyrin (N-NHCO(o-Cl)C₆H₄-Htpp; 11) have been investigated for the Zn²⁺ ion. Insertion of Zn results in the formation of the zinc complex Zn(N-NCO(o-Cl)C₆H₄-tpp)(MeOH) · MeOH (12 · MeOH). The diamagnetic 12 · MeOH can be transformed into the diamagnetic Zn(N-NHCO(o-Cl)C₆H₄-tpp)Cl · CH₂Cl₂ (13 · CH₂Cl₂) in a reaction with aqueous hydrogen chloride (2%). X-ray structures for 12 · MeOH and 13 · CH₂Cl₂ have been determined. The coordination sphere around the Zn²⁺ ion in 12 · MeOH is a distorted trigonal bipyramid with N(2), N(4) and O(2) lying in the equatorial plane, whereas for the Zn²⁺ ion in 13 · CH₂Cl₂, it is a square-based pyramid in which the apical site is occupied by the Cl(1) atom.     

Novel dinuclear and polynuclear copper(II)-pyrazine-2,3-dicarboxylate supramolecular complexes with 1,3-propanediamine, N,N,N′,N′-tetramethylethylenediamine and 2,2′-bipyridine

Three novel Cu(II)-pyrazine-2,3-dicarboxylate complexes with 1,3-propanediamine (pen), [Cu₂(μ-pzdc)₂(pen)₂] · 2H₂O (1), N,N,N′,N′-tetramethylethylenediamine (tmen), {[Cu(μ-pzdc)(tmen)] · H₂O}_n(2), and 2,2′-bipyridine (bipy), {[Cu(μ-pzdc)(bipy)]·H₂O}_n(3) have been synthesized and characterized by means of elemental and thermal analyses, magnetic susceptibilities, IR and UV/vis spectroscopic studies. The molecular structures of dinuclear (1) and polynuclear (2 and 3) complexes have been determined by the single crystal X-ray diffraction technique. The pyrazine-2,3-dicarboxylate acts as a bridging ligand through oxygen atom of carboxylate group and N atom of pyrazine ring and one oxygen atom of neighboring carboxylate. It links the Cu(II) ions to generate a distorted square pyramidal geometry forming a one-dimensional (1D) chain. Adjacent chains of 1 and 2 are then mutually linked via hydrogen bonding interactions, which are further assembled to form a two and three-dimensional network, respectively. The chains of complex 3 are further constructed to form three-dimensional framework by hydrogen bonding, C–H?π and ring?ring stacking interactions. In the complexes, Cu(II) ions have distorted square pyramidal geometry. Thermal analyses properties and thermal decomposition mechanism of complexes have been investigated by using thermal analyses techniques (TG, DTG and DTA).     

Complexes derived from the general copper(II)/maleamic acid/N,N′,N′′-chelate reaction systems: Synthetic,reactivity, structural and spectroscopic studies

The synthetic investigation of the Cu^II/maleamate(−1) ion (HL⁻)/N,N′,N′′-chelate general reaction system has allowed access to compounds [Cu₂(HL)₂(bppy)₂](ClO₄)₂·H₂O (1·H₂O), [Cu(HL)(bppy)(ClO₄)] (2) and [Cu(HL)(terpy)(H₂O)](ClO₄) (4) (bppy = 2,6-bis(pyrazol-1-yl)pyridine, terpy = 2,2′;6′,2′′-terpyridine). In the absence of externally added hydroxides, compound [Cu₂(L′)₂(bppy)₂](ClO₄)₂ (3) was obtained from MeOH solutions; L′⁻ is the monomethyl maleate(−1) ligand which is formed in situ via the Cu^II-assisted HL⁻ → L′⁻ transformation. In the case of tptz-containing (tptz = 2,4,6-tris(2-pyridyl)-1,3,5-triazine) reaction systems, the Cu^II-assisted hydrolysis of tptz to pyridine-2-carboxamide (L1) afforded complex [Cu(L1)₂(NO₃)₂] (5). The crystal structures of 1–5 are stabilized by intermolecular hydrogen bonding and π–π stacking interactions. Characteristic IR bands of the complexes are discussed in terms of the known structures and the coordination modes of the ligands.     

N,N-polymethylene-bisadenine complexes with d metal ions

The reaction of N⁹,N^9′-(tri or tetramethylene)-bisadenines (Ade₂C_x; x = 3 or 4) in HCl 2 M at 50 °C with MCl₂ · 2H₂O [M = Zn(II), Cd(II)] yields outer sphere compounds like the previously described [(H-Ade)₂C₃][ZnCl₄] · H₂O (3) and [(H-Ade)₂C₃]₂[Cd₂Cl₈(H₂O)₂] · 4H₂O (4) for Ade₂C₃ and the new {[(H-Ade)₂C₄][Cd₂Cl₆(H₂O)₂] · 2H₂O}_n (5) for Ade₂C₄. On the other hand, only in case of Zn(II) complexes by changing [HCl] to 0.1 M, the inner sphere compounds [H-(Ade)₂C₃(ZnCl₃)] (6) and [H-(Ade)₂C₄(ZnCl₃)] · 1.5H₂O (7) are obtained. X-ray diffraction study of compound 6, which represents the first inner sphere complex with a N⁹,N^9′-bisadenine, shows a zwitterionic form with one adenine ring protonated at N(1) while the other ring is coordinated via N(7) to a ZnCl₃ moiety as in other alkyl-adenine derivatives. In addition, with Ade₂C₄, is also possible to obtain another inner sphere complex: [(H-Ade)₂C₄(ZnCl₃)₂] · 3H₂O (8).     

Spatial and Electronic Structure of 2-(2-Furyl)- and 2-(2-Thienyl)pyrroles According to 1H and 13C NMR Data

In 2-(2-furyl)- and 2-(2-thienyl)pyrroles the heterocycles are in efficient ,-conjugation. The presumably possible for this compounds intramolecular hydrogen bond N-H···O or N-H···S is lacking. The COCF₃ group in position 2 of the pyrrole ring is syn-oriented with respect to pyrrole fragment, and the orientation is fixed by an intramolecular hydrogen bond N-H···O. However no bifurcating hydrogen bonds arise in the molecules containing COCF₃ group.     

Synthesis, structure of [H3dien]·(MF6)·H2O (M=Cr, Fe) and Fe Mössbauer study of [H3dien]·(FeF6)·H2O

Single crystals of [H₃dien]·(FeF₆)·H₂O (I) and [H₃dien]·(CrF₆)·H₂O (II) are obtained by solvothermal synthesis under microwave heating. I is orthorhombic (Pna2₁) with a=11.530(2) Å, b=6.6446(8) Å, c=13.787(3) Å, V=1056.3(2) Å³ and Z=4. II is monoclinic (P2₁/c) with a=13.706(1) Å, b=6.7606(6) Å, c=11.3181(9) Å, β=99.38(1)°, V=1034.7(1) Å³ and Z=4. The structure determinations, performed from single crystal X-ray diffraction data, lead to the R₁/wR₂ reliability factors 0.028/0.066 for I and 0.035/0.102 for II. The structures of I and II are built up from isolated FeF₆ or CrF₆ octahedra, water molecules and triprotonated amines. In both structures, each octahedron is connected by hydrogen bonds to six organic cations and two water molecules. The iron-based compound is also characterized by ⁵⁷Fe Mössbauer spectrometry: the hyperfine structure confirms the presence of Fe³⁺ in octahedral coordination and reveals the existence of paramagnetic spin fluctuations.     

Synthesis of a new N,N-ethane-1,2-bis(4-methoxyphenyl)carbothioamide ligand and its Cu(I) and Ag(I) complexes

[Cu(H₂L)(PPh₃)₂]NO₃ · 0.5H₂O (2) and [Ag(H₂L)(PPh₃)₂]NO₃ · 0.5H₂O (3) complexes of a new flexible thioamide ligand; N,N′-ethane-1,2-bis(4-methoxyphenyl)carbothioamide H₂L (1) have been synthesized using PPh₃ as a coligand. The synthesized compounds have been characterized with the help of elemental analyses, IR, ¹H, ¹³C and ³¹P NMR spectroscopy. The ligand and its Cu(I) complex have been studied by single crystal X-ray crystallography. The ligand acts as a neutral S-donor and forms a nine-membered chelate ring in [Cu(H₂L)(PPh₃)₂]NO₃ · 0.5H₂O. The molecular packing is stabilized by an anionic cavity formed by intermolecular hydrogen bonding between the basal plane of the complex molecule and the nitrate ions. The square shaped columnar channel has dimensions of 5.489(25) [N(11)–H(11A)?O(13)?H(21A)N(21)] × 3.693(7) [N(11)–C(11)–C(21)–N(21)] Å.     

Syntheses and study on nickel and copper complexes with 1,3,5-benzenetricarboxylic acid. Crystal and molecular structure of [Cu3(mdpta)3(btc)](ClO4)3 · 4H2O

Nickel and copper complexes containing 1,3,5-benzenetricarboxylic acid, with a combination of selected N-donor ligands and Schiff bases, of the composition Ni₃(bimz)₆(btc)₂ · 12H₂O (1), Ni₃(btz)₉(btc)₂ · 12H₂O (2), Ni₂(L₁)(btc) · 7H₂O (3), Ni₃(L₂)₂(Hbtc) · 9H₂O (4), Ni₂(L₃)(btc) · 4H₂O (5), Cu₂(L₄)(btc) · 7H₂O (6), [Cu₃(pmdien)₃(btc)](ClO₄)₃ · 6H₂O (7) and [Cu₃(mdpta)₃(btc)](ClO₄)₃ · 4H₂O (8); H₃btc = 1,3,5-benzenetricarboxylic acid, bimz = benzimidazole, btz = 1,2,3-benztriazole, L₁ = 2-[(phenylimino)methyl]phenol, L₂ = N,N′-bis-(salicylidene)propylenediamine, L₃ = 2-{[(2-nitrophenyl)methylene]amino}phenol, L₄ = 2-[(4-methoxy-phenylimino)methyl]phenol, pmdien = N,N,N′,N″,N″-pentamethyldiethylenetriamine, mdpta = N,N-bis-(3-aminopropyl)methylamine, have been synthesized. The complexes have been studied by elemental analysis, IR, UV–Vis spectroscopies, magnetochemical and conductivity measurements and selected compounds also by thermal analysis. The crystal and molecular structure of complex 8 was solved. The complex is trinuclear with btc³⁻-bridge. The coordination polyhedron around each copper atom can be described as a distorted square with a CuON₃ chromophore formed by one oxygen atom of carboxylate and three nitrogen atoms of mdpta. The magnetic properties of 8 have been studied in the 1.8–300 K temperature range revealing a very weak antiferromagnetic exchange interaction with J = −0.56 cm⁻¹ for g = 2.13(9). The antimicrobial activities against selected strains of bacteria were evaluated. It was found that only complex 5 is able to inhibit the growth of Staphylococcus strains.     

Copper(II) complexes of N(4)-substituted thiosemicarbazones derived from pyridine-2-carbaldehyde: Crystal structure of a binuclear complex

Ten copper(II) complexes {[CuL¹Cl] (1), [CuL¹NO₃]₂ (2), [CuL¹N₃]₂ · 2/3H₂O (3), [CuL¹]₂(ClO₄)₂ · 2H₂O (4), [CuL²Cl]₂ (5), [CuL²N₃] (6), [Cu(HL²)SO₄]₂ · 4H₂O (7), [Cu(HL²)₂] (ClO₄)₂ · 1/2EtOH (8), [CuL³Cl]₂ (9), [CuL³NCS] · 1/2H₂O (10)} of three NNS donor thiosemicarbazone ligands {pyridine-2-carbaldehyde-N(4)-p-methoxyphenyl thiosemicarbazone [HL¹], pyridine-2-carbaldehyde-N(4)-2-phenethyl thiosemicarbazone [HL²] and pyridine-2-carbaldehyde N(4)-(methyl), N(4)-(phenyl) thiosemicarbazone [HL³]} were synthesized and physico-chemically characterized. The crystal structure of compound 9 has been determined by X-ray diffraction studies and is found that the dimer consists of two square pyramidal Cu(II) centers linked by two chlorine atoms.     

Experimental and theoretical study of N-(2-hydroxyethyl)morpholine betaine

N-(2-hydroxyethyl)morpholine betaine (HEMB) has been characterized by a single crystal X-ray analysis, FTIR spectroscopy and DFT calculations. The crystals are monoclinic, space group P2₁/c with a=10.273(2), b=9.360(2), c=9.447(2) Å and β=104.72(3)Å. Two molecules of HEMB form a centrosymmetric dimer (X2) connected by a pair of hydrogen bonds between the CH₂CH₂OH and COO⁻ groups, with the O?O distance of 2.672(2) Å. The morpholine ring adopts a chair conformation with the CH₂CH₂OH group in the axial and the CH₂COO⁻ group in the equatorial position. The structures of the dimer, B2, and two monomers, B1a and B1b, have been optimized by the B3LYP approach using the 6-31G(d,p) basis set. The computed structure of B2, agrees well with the experimental X2. From two stable monomeric conformers the more favored is B1a, with the intramolecular hydrogen bond with the O-H?O distance of 2.566 Å. The effects of hydrogen bonding and electrostatic interactions on the conformation of the molecules investigated have been discussed. The FTIR spectrum shows a broad absorption in the 3300-2600 cm⁻¹ region, typical of moderate O-H?O hydrogen bonds.     

Syntheses,structures and hydrolytic properties of copper(II) complexes of asymmetrically N-functionalised 1,4,7-triazacyclononane ligands

A series of new asymmetrically N-substituted derivatives of the 1,4,7-triazacyclononane (tacn) macrocycle have been prepared from the common precursor 1,4,7-triazatricyclo[5.2.1.0^4,10]decane: 1-ethyl-4-isopropyl-1,4,7-triazacyclononane (L1), 1-isopropyl-4-propyl-1,4,7-triazacyclononane (L2), 1-(3-aminopropyl)-4-benzyl-7-isopropyl-1,4,7-triazacyclononane (L3), 1-benzyl-4-isopropyl-1,4,7-triazacyclononane (L4) and 1,4-bis(3-aminopropyl)-7-isopropyl-1,4,7-triazacyclononane (L5). The corresponding monomeric copper(II) complexes were synthesised and were found to be of composition: [Cu(L1)Cl₂] · 1/2 H₂O (C1), [Cu(L4)Cl₂] · 4H₂O (C2), [Cu(L3)(MeCN)](ClO₄)₂ (C3), [Cu(L5)](ClO₄)₂ · MeCN · NaClO₄ (C4) and [Cu(L2)Cl₂] · 1/2 H₂O (C5). The X-ray crystal structures of each complex revealed a distorted square-pyramidal copper(II) geometry, with the nitrogen donors on the ligands occupying 3 (C1 and C2), 4 (C3) or 5 (C4) coordination sites on the Cu(II) centre. The metal complexes were tested for the ability to hydrolytically cleave phosphate esters at near physiological conditions, using the model phosphodiester, bis(p-nitrophenyl)phosphate (BNPP). The observed rate constants for BNPP cleavage followed the order k_C1 ≈ k_C2 > k_C5 ? k_C3 > k_C4, confirming that tacn-type Cu(II) complexes efficiently accelerate phosphate ester hydrolysis by being able to bind phosphate esters and also form the nucleophile necessary to carry out intramolecular cleavage. Complexes C1 and C2, featuring asymmetrically disubstituted ligands, exhibited rate constants of the same order of magnitude as those reported for the Cu(II) complexes of symmetrically tri-N-alkylated tacn ligands (k ∼ 1.5 × 10⁻⁵ s⁻¹).     

Structural and spectral studies of nickel(II) complexes with N(4),N(4)-(butane-1,4-diyl) thiosemicarbazones

Nickel(II) complexes of quinoline-2-carbaldehyde N(4),N(4)-(butane-1,4-diyl) thiosemicarbazone (HL¹) and 2-benzoylpyridine N(4),N(4)-(butane-1,4-diyl) thiosemicarbazone (HL²) have been synthesized and physico-chemically characterized by means of partial elemental analyses, molar conductance measurements, magnetic measurements, electronic and infrared spectral studies. Three complexes were given the formulae [Ni(HL¹)₂]Cl₂ (1), [Ni(HL²)L²]ClO₄ · 7H₂O (2) and [NiL²Cl] · 0.5H₂O (3). The structure of compound 1 has been solved by single crystal X-ray crystallography and is found to be distorted octahedral. Compound 2, when crystallized in DMSO solution, got deprotonated to form a new compound [Ni(L²)₂] (2a), with a distorted octahedral Ni(II) center. In compound 1, HL¹ coordinates to the metal in the thione form, while in compounds 2a and 3, HL² coordinates in its deprotonated thiolate form.     

Structural diversity in Cu(II), Cd(II) and Hg(II) coordination complexes with the rigid N,N′-bis(2/3-aryl)-1,4-benzenedicarboxamide ligand

The syntheses and structures of a series of metal complexes, namely Cu₂Cl₄(L¹)(DMSO)₂·2DMSO (L¹ = N,N′-bis(2-pyridinyl)-1,4-benzenedicarboxamide), 1; {[Cu(L²)_1.5(DMF)₂][ClO₄]₂·3DMF}_∞ (L² = N,N′-bis(3-pyridinyl)-1,4-benzenedicarboxamide), 2; {[Cd(NO₃)₂(L³)]·2DMF}_∞ (L³ = N,N′-bis-(2-pyrimidinyl)-1,4-benzenedicarboxamide), 3; {[HgBr₂(L³)]·H₂O}_∞, 4, and {[Na(L³)₂][Hg₂X₅]·2DMF}_∞ (X = Br, 5; I, 6) are reported. All the complexes have been characterized by elemental analysis, IR spectra and single crystal X-ray diffraction. Complex 1 is dinuclear and the molecules are interlinked through S?S interactions. In 2, the Cu(II) ions are linked through the L² ligands to form 1-D ladder-like chains with 60-membered metallocycles, whereas complexes 3 and 4 form 1-D zigzag chains. In complexes 5 and 6, the Na(I) ions are linked by the L³ ligands to form 2-D layer structures in which the [Hg₂X₅]⁻ anions are in the cavities. The L² ligand acts only as a bridging ligand, while L¹ and L³ show both chelating and bridging bonding modes. The L¹ ligand in 1 adopts a trans-anti conformation and the L² ligand in 2 adopts both the cis-syn and trans-anti conformations, whereas the L³ ligands in 3–6 adopt the trans conformation.     

Syntheses,structures and electrochemistry of manganese(III) complexes derived from N,N′-o-phenylenebis(3-ethoxysalicylaldimine): Efficient catalyst for styrene epoxidation

Syntheses, characterizations, electrochemistry and catalytic properties for styrene epoxidation of three manganese(III) compounds [Mn^IIIL¹(H₂O)(MeOH)](ClO₄) (1) [Mn^IIIL¹(N₃)(H₂O)]·dmf (2) [Mn^IIIL¹(Cl)(H₂O)] (3) derived from the Schiff base compartmental ligand N,N′-o-phenylenebis(3-ethoxysalicylaldimine) (H₂L¹) are reported. The three compounds are characterized by elemental analyses, IR, mass and UV–Vis spectra and conductance values. Single crystal X-ray structures of 1 and 2 have been determined. The structures of 1 and 2 show that these are mononuclear compounds having a salen type structure. In both structures, a dinuclear species is formed by bifurcated hydrogen bonding involving coordinated water molecule. The coordination of chloride in 3 is shown by conductance measurements. The compounds have also been characterized by UV–Vis and mass spectroscopic studies. Cyclic voltammetric and square wave voltammetric studies of the three compounds reveal that these undergo Mn(III)/Mn(II) reduction reversibly with the order of the ease of reduction as 3 > 2 > 1. This order has been explained proposing the composition of active species in solution. Catalytic properties for epoxidation of styrene by all the three complexes using PhIO and NaOCl as oxidant have been studied. The order of both the styrene conversion and styrene epoxidation using the three title compounds is 3 > 1 > 2. Again, it has been observed that more efficient conversion and epoxidation take place when PhIO is used as oxidant.     

Structural and vibrational study on N-(biphenyl-2-thiocarbamoyl)-4-phenylcarboxamide

A new thiourea derivative, N-(biphenyl-2-thiocarbamoyl)-4-phenylcarboxamide, is synthesized and characterized by elemental analysis, FTIR, NMR and the single crystal X-ray diffraction study. The title compound crystallizes with two molecules in the asymmetric unit. The dihedral angle between the two aromatic rings in the biphenyl unit is 47.9(2) and 56.52(19)°, respectively, for the two molecules in the asymmetric unit. The molecular conformation is stabilized by intramolecular NH?O hydrogen bond. The crystal packing shows that the molecules form centrosymmetric dimers connected by NH?S hydrogen bonds. The vibrational properties have been studied by FTIR and FT-Raman spectroscopy along with quantum chemical calculations at the B3LYP/6-311 + G^* level of approximation. The main normal modes related with the thioamide bands are discussed.     

Uranyl(VI) complexes of [O,N,O,N′]-type diaminobis(phenolate) ligands: Syntheses,structures and extraction studies

The syntheses and crystal structures of four new uranyl complexes with [O,N,O,N′]-type ligands are described. The reaction between uranyl nitrate hexahydrate and the phenolic ligand [(N,N-bis(2-hydroxy-3,5-dimethylbenzyl)-N′,N′-dimethylethylenediamine)], H₂L1 in a 1:2 molar ratio (M to L), yields a uranyl complex with the formula [UO₂(HL1)(NO₃)] · CH₃CN (1). In the presence of a base (triethylamine, one mole per ligand mole) with the same molar ratio, the uranyl complex [UO₂(HL1)₂] (2) is formed. The reaction between uranyl nitrate hexahydrate and the ligand [(N,N-bis(2-hydroxy-3,5-di-t-butylbenzyl)-N′,N′-dimethylethylenediamine)], H₂L2, yields a uranyl complex with the formula [UO₂(HL2)(NO₃)] · 2CH₃CN (3) and the ligand [N-(2-pyridylmethyl)-N,N-bis(2-hydroxy-3,5-dimethylbenzyl)amine], H₂L3, in the presence of a base yields a uranyl complex with the formula [UO₂(HL3)₂] · 2CH₃CN (4). The molecular structures of 1–4 were verified by X-ray crystallography. The complexes 1–4 are zwitter ions with a neutral net charge. Compounds 1 and 3 are rare neutral mononuclear [UO₂(HLn)(NO₃)] complexes with the nitrate bonded in η²-fashion to the uranyl ion. Furthermore, the ability of the ligands H₂L1–H₂L4 to extract the uranyl ion from water to dichloromethane, and the selectivity of extraction with ligands H₂L1, H₃L5 (N,N-bis(2-hydroxy-3,5-dimethylbenzyl)-3-amino-1-propanol), H₂L6 · HCl (N,N-bis(2-hydroxy-5-tert-butyl-3-methylbenzyl)-1-aminobutane · HCl) and H₃L7 · HCl (N,N-bis(2-hydroxy-5-tert-butyl-3-methylbenzyl)-6-amino-1-hexanol · HCl) under varied chemical conditions were studied. As a result, the most efficient and selective ligand for uranyl ion extraction proved to be H₃L7 · HCl.     

Reactivity of M(en)Cl2 (M = Pd/Pt,en = 1,2-diaminoethane) with N,N′-bis(salicylidene)-p-phenylenediamine: Binding with hexafluorobenzene

Schiff base N,N′-bis(salicylidene)-p-phenylenediamine (LH₂) complexed with Pt(en)Cl₂ and Pd(en)Cl₂ provided [Pt(en)L]₂ · 4PF₆ (1) and Pd(Salen) (2) (Salen = N,N′-bis(salicylidene)-ethylenediamine), respectively, which were characterized by their elemental analysis, spectroscopic data and X-ray data. A solid complex obtained by the reaction of hexafluorobenzene (hfb) with the representative complex 1 has been isolated and characterized as 3 (1 · hfb) using UV–Vis, NMR (¹H, ¹³C and ¹⁹F) data. A solid complex of hfb with a reported Zn-cyclophane 4 has also been prepared and characterized 5 (4 · hfb) for comparison with complex 3. The association of hfb with 1 and 4 has also been monitored using UV–Vis and luminescence data.     

Synthesis and properties of novel guanidine bases. N,N′,N″-Tris(3-dimethylaminopropyl)-guanidine

The synthesis of novel N,N′,N″-tris(3-dimethylaminopropyl)-guanidine 1 is described and X-ray structure of its hexafluorophosphate salt measured (1H·PF₆). The hydrogen bonding in protonated 1 and in 1H·PF₆ is also discussed.