Composite polymer nanofibers with carbon nanotubes and titanium dioxide particles

Composite nanofibers containing nanometric TiO2 particles and multiwalled carbon nanotubes dispersed in poly(acrylonitrile) (PAN) were prepared by the electrospinning technique. The structure and quality of the precursor dispersions were evaluated by cryo-transmission electron microscopy. The fabricated nanofibers, the diameters of which were in the 20-200 nm range, contained well-oriented nanotubes and spherical TiO2 nanoparticles in close proximity. Such nanofibers are under investigation as new photocatalytic reactor elements.     

Kinetic separation of carbon dioxide and methane on a copper metal-organic framework

Separation of carbon dioxide and methane is an important issue in upgrading low-quality natural gas. Adsorption equilibria and kinetics of CO(2) and CH(4) on a copper metal-organic framework (MOF), Cu(hfipbb)(H(2)hfipbb)(0.5) [H(2)hfipbb=4,4'-(hexafluoroisopropylidene) bis(benzoic acid)], were investigated to evaluate the feasibility of removing CO(2) from CH(4) in a pressure swing adsorption process using this new MOF adsorbent. The heat of adsorption of CO(2) on the Cu-MOF at zero-coverage (29.7 kJ/mol) is much lower than those on a carbon molecular sieve and a zeolite 5A adsorbent; and the heat of adsorption of CH(4) on the Cu-MOF (21.4 kJ/mol) is similar to that on the zeolite 5A adsorbent and smaller than that on a carbon molecular sieve. The Cu-MOF being investigated has apertures of (~3.5 × 3.5 ?), which favors the kinetically controlled separation of CO(2) and CH(4). The kinetic selectivity is found to be 26 at 298 K, and the overall selectivity (combining the equilibrium and kinetic effects) is about 25 for an adsorption separation process. These results suggest that the Cu-MOF adsorbent is an attractive alternative adsorbent for the CO(2)/CH(4) separation.     

Adsorption and separation of carbon dioxide and methane in new zeolites using the Grand Canonical Monte Carlo method

The adsorption and separation behaviors of CO₂ and CH₄ in new siliceous zeolites (IFO, JSR, OKO, SEW) were simulated using the Grand Canonical Monte Carlo method in the paper. The adsorption isotherms for pure components and binary mixtures of CO₂ and CH₄ in four siliceous zeolites were obtained. The adsorption thermodynamic properties including Gibb’s free energy change, enthalpy change and entropy change were investigated. The results demonstrate that the adsorbed amount of pure components increases with an increase in pressure, and larger pore volume and surface area are beneficial to improve the adsorption capacity. The adsorption amount of CO₂ and CH₄ in the JSR zeolite is 7.08 and 2.27 mmol g^?1 at 1000 kPa, respectively. In view of the thermodynamic results, the new siliceous zeolites show a higher affinity for CO₂. The adsorption capacities of CO₂ in all zeolites were five times more than those of CH₄ in binary mixtures based on the ratios of equilibrium adsorption capacity. Considering the adsorption uptake and selectivity for CO₂/CH₄, the JSR zeolite is a good candidate for the separation of CO₂/CH₄ at low pressure.     

Adsorption separation of carbon dioxide, methane and nitrogen on monoethanol amine modified B-zeolite

A new type of composite adsorbents was synthesized by incorporating monoethanol amine (MEA) into β-zeolite. The parent and MEA-functionalized β-zeolites were characterized by X-ray diffraction (XRD), N₂ adsorption, and thermogravimetric analysis (TGA). The adsorption behavior of carbon dioxide (CO₂), methane (CH₄), and nitrogen (N₂) on these adsorbents was investigated at 303 K. The results show that the structure of zeolite was well preserved after MEA modification. In comparison with CH₄ and N₂, CO₂ was preferentially adsorbed on the adsorbents investigated. The introduction of MEA significantly improved the selectivity of both CO₂/CH₄ and CO₂/N₂, the optimal selectivity of CO₂/CH₄ can reach 7.70 on 40 wt% of MEA-functionalized β-zeolite (MEA(40)-β) at 1 atm. It is worth noticing that a very high selectivity of CO₂/N₂ of 25.67 was obtained on MEA(40)-β. Steric effect and chemical adsorbate-adsorbent interaction were responsible for such high adsorption selectivity of CO₂. The present MEA-functionalized β-zeolite adsorbents may be a good candidate for applications in flue gas separation, as well as natural gas and landfill gas purifications.     

Synthesis of a hybrid assembly composed of titanium dioxide nanoparticles and thin multi-walled carbon nanotubes using "click chemistry"

A hybrid assembly composed of thin multi-walled carbon nanotubes (t-MWCNT) and titanium dioxide (TiO(2)) has been prepared by using "click" chemistry for photocatalytic applications. TiO(2)-decorated t-MWCNT hybrids with anatase phase TiO(2) were obtained from the reaction of an azide moiety-containing TiO(2) with alkyne-functionalized t-MWCNTs. The hybrids were systematically characterized using Fourier transform infrared spectroscopic (FT-IR), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectrum (EDX), and X-ray diffraction (XRD) measurements. The nanohybrid has been proved to be highly active and robust for photocatalytic degradation of methyl orange. The click coupling approach is a simple and convenient route to efficiently assemble TiO(2) on the surface of carbon nanotubes, and can be extended to obtain many other nanoparticle hybrids based on carbon nanotubes.     

Modified poly(phenylene oxide) membranes for the separation of carbon dioxide from methane

Two types of poly(phenylene oxide) (PPO) membranes were prepared: one by chemical modification through sulfonation using chlorosulfonic acid and another by physical incorporation with a heteropolyacid (HPA), viz., phosphotungstic acid. These membranes were tested for the separation of CO₂/CH₄ mixtures. Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction techniques were used to confirm the modified structure of PPO as well as to understand its interactions with gaseous molecules. Scanning electron microscopy (SEM) was used to investigate the membrane morphology. Thermal stability of the modified polymers was assessed by differential scanning calorimetry (DSC), while the tensile strength was measured to evaluate their mechanical stability. Both chemical and physical modifications did not adversely affect the thermally and mechanical stabilities. Experiments with pure CO₂ and CH₄ gases showed that CO₂ selectivity (27.2) for SPPO increased by a factor of 2.2, while the PPO–HPA membrane exhibited 1.7 times increase in selectivity with a reasonable permeability of 28.2 Barrer. An increase in flux was observed for the binary CO₂/CH₄ mixture permeation with an increasing feed concentration (5–40 mol%) of CO₂. An enhancement in feed pressure from 5 to 40 kg/cm² resulted in reduced CO₂ permeability and selectivity due to the competitive sorption of methane. Both the modified PPO membranes were found to be promising for enrichment of methane despite exhibiting lower permeability values than the pristine PPO membrane.     

Adsorption separation of carbon dioxide,methane, and nitrogen on Hβ and Na-exchanged β-zeolite

Adsorption isotherms of carbon dioxide （CO2）, methane （CH4）, and nitrogen （N2） on Hβand sodium exchanged β-zeolite （Naβ） were volumetrically measured at 273 and 303 K. The results show that all isotherms were of Brunauer type I and well correlated with Langmuir-Freundlich model. After sodium ions exchange, the adsorption amounts of three adsorbates increased, while the increase magnitude of CO2 adsorption capacity was much higher than that of CH4 and N2. The selectivities of CO2 over CH4 and CO2 over N2 enhanced after sodium exchange. Also, the initial heat of adsorption data implied a stronger interaction of CO2 molecules with Na＋ ions in Naβ . These results can be attributed to the larger electrostatic interaction of CO2 with extraframework cations in zeolites. However, Naβ showed a decrease in the selectivity of CH4 over N2, which can be ascribed to the moderate affinity of N2 with Naβ. The variation of isosteric heats of adsorption as a function of loading indicates that the adsorption of CO2 in Naβ presents an energetically heterogeneous profile. On the contrary, the adsorption of CH4 was found to be essentially homogeneous, which suggests the dispersion interaction between CH4 and lattice oxygen atoms, and such interaction does not depend on the exchangeable cations of zeolite.     

Catalytic reaction of methane with carbon dioxide

High activities and selectivities of Ni on SiO₂ catalysts producing CO in the reaction of CH₄ with CO₂, have been obtained at relatively low temperatures. These aspects are considerably different from the activities or selectivities of other catalysts, and have been explained by assuming that the Ni on SiO₂ catalyst markedly suppresses carbon deposition.

---

CO Ni SiO₂ CH₄ CO₂. , Ni SiO₂.

     

Symmetry and stability of nanotubes based on titanium dioxide

The process of rolling a monolayer of bulk crystal with biperiodical planar lattice to the nanotube was analyzed. It was shown by an example of the carbon nanotubes how the tube symmetry can be revealed through the analysis of symmetry of graphene layers (the layer group with a hexagonal planar lattice) and its changes at the rolling to form the tube. The developed approach can be used to analyze the symmetry of any nanotube. A computer program we developed is discussed that allows to determine the nanotube symmetry using the data on the symmetry and coordinates of the atoms in the nanolayer and get the coordinates of the atoms in the unit cell of the nanotube which can be used for the further quantum-chemical calculations. The method and results of ab initio calculations of the titanium dioxide monolayer stability in the LCAO basis optimized for the bulk crystal, using the hybrid exchange-correlation potential PBE0 are presented. Symmetry properties of nanotubes obtained by rolling the three- and six-plane monolayers (101) and (001) of anatase are discussed. Atomic and electronic structure of TiO₂ nanotubes found by geometry optimization is analyzed. It is shown that titanium dioxide nanotubes based on the three-plane monolayers with hexagonal and square lattice are approximately of the same stability. The data on the stability of nanotubes are essential for the synthesis of new nanomaterials based on titanium dioxide.     

The production of carbon nanotubes from carbon dioxide:challenges and opportunities

Recent advances in the production of carbon nanotubes (CNTs) are reviewed with an emphasis on the use of carbon dioxide (CO2) as a sole source of carbon. Compared to the most widely used carbon precursors such as graphite, methane, acetylene, ethanol, ethylene, and coal-derived hydrocarbons, CO2 is competitively cheaper with relatively high carbon yield content. However, CNT synthesis from CO2 is a newly emerging technology, and hence it needs to be explored further. A theoretical and analytical comparison of the currently existing CNT-CO2 synthesis techniques is given including a review of some of the process parameters (i.e., temperature, pressure, catalyst, etc.) that affect the CO2 reduction rate. Such analysis indicates that there is still a fundamental need to further explore the following aspects so as to realize the full potential of CO2 based CNT technology: (1) the CNT-CO2 synthesis and formation mechanism, (2) catalytic effects of transitional metals and mechanisms, (3) utilization of metallocenes in the CNT-CO2 reactions, (4) applicability of ferrite-organometallic compounds in the CNT-CO2 synthesis reactions, and (5) the effects of process parameters such as temperature, etc.     

The production of carbon nanotubes from carbon dioxide: challenges and opportunities

Recent advances in the production of carbon nanotubes (CNTs) are reviewed with an emphasis on the use of carbon dioxide (CO2) as a sole source of carbon. Compared to the most widely used carbon precursors such as graphite, methane, acetylene, ethanol, ethylene, and coal-derived hydrocarbons, CO2 is competitively cheaper with relatively high carbon yield content. However, CNT synthesis from CO2 is a newly emerging technology, and hence it needs to be explored further. A theoretical and analytical comparison of the currently existing CNT-CO2 synthesis techniques is given including a review of some of the process parameters (i.e., temperature, pressure, catalyst, etc.) that affect the CO2 reduction rate. Such analysis indicates that there is still a fundamental need to further explore the following aspects so as to realize the full potential of CO2 based CNT technology: (1) the CNT-CO2 synthesis and formation mechanism, (2) catalytic effects of transitional metals and mechanisms, (3) utilization of metallocenes in the CNT-CO2 reactions, (4) applicability of ferrite-organometallic compounds in the CNT-CO2 synthesis reactions, and (5) the effects of process parameters such as temperature, etc.     

Coating carbon nanotubes with polymer in supercritical carbon dioxide

A facile and efficient method has been developed for coating MWNTs with solvent resistant polymer in scCO2, which permits the selective deposition of high molecular weight fluorinated graft poly(methyl vinyl ether-alt-maleic anhydride) polymer onto MWNTs in scCO2 under 100-170 bar at 40 degrees C and forms quasi one-dimensional nanostructures with conducting cores and insulating surfaces.     

From carbon dioxide to methane: homogeneous reduction of carbon dioxide with hydrosilanes catalyzed by zirconium-borane complexes

A mixture of a zirconium benzyl phenoxide complex and tris(pentafluorophenyl)borane is reported that catalyzes the hydrosilation reaction of carbon dioxide to generate methane via a bis(silyl)acetal intermediate.     

Single-walled carbon nanotubes as stationary phase in gas chromatographic separation and determination of argon, carbon dioxide and hydrogen

A chromatographic technique is introduced based on single-walled carbon nanotubes (SWCNTs) as stationary phase for separation of Ar, CO₂ and H₂ at parts per million (ppm) levels. The efficiency of SWCNTs was compared with solid materials such as molecular sieve, charcoal, multi-walled carbon nanotubes and carbon nanofibers. The morphology of SWCNTs was optimized for maximum adsorption of H₂, CO₂ and Ar and minimum adsorption of gases such as N₂, O₂, CO and H₂O vapour. To control temperature of the gas chromatography column, peltier cooler was used. Mixtures of Ar, CO₂ and H₂ were separated according to column temperature program. Relative standard deviation for nine replicate analyses of 0.2 mL H₂ containing 10 μL of each Ar or CO₂ was 2.5% for Ar, 2.8% for CO₂ and 3.6% for H₂. The interfering effects of CO, and O₂ were investigated. Working ranges were evaluated as 40-600 ppm for Ar, 30-850 ppm for CO₂ and 10-1200 ppm for H₂. Significant sensitivity, small relative standard deviation (RSD) and acceptable limit of detection (LOD) were obtained for each analyte, showing capability of SWCNTs for gas separation and determination processes. Finally, the method was used to evaluate the contents of CO₂ in air sample.     

Reduction of carbon dioxide with methane over Ni-catalyst

The reaction CO₂+CH₄=2CO+2H₂+60 kcal/mol was carried out over some transition metal catalysts (Ni, Fe and Co) and Ni/Al₂O₃ catalyst was then found to be the best for the reaction. The reaction rate expression and the apparent activation energy were also obtained over the Ni catalyst.

---

CO₂+CH₄=2CO+2H₂+60 / (Ni, Fe Co). Ni/Al₂O₃ . Ni-.

     

Photoreduction of carbon dioxide by hydrogen and methane

Zirconium oxide is active for photoreduction of gaseous carbon dioxide to carbon monoxide with hydrogen. A stable surface species arises under the photoreduction of CO₂ on zirconium oxide, and it is identified as surface formate by infrared spectroscopy. Adsorbed CO₂ is converted to formate by photoreaction with hydrogen. The surface formate is a true reaction intermediate since CO is formed by the photoreaction of formate and CO₂; surface formate works as a reductant of carbon dioxide to yield carbon monoxide. The dependence on the wavelength of irradiation light shows that a bulk ZrO₂ is not a photoactive species. When ZrO₂ adsorbs CO₂ a new band appears in photoluminescence excitation spectrum. The photoactive species in the reaction that CO₂+H₂ yields HCOO⁻ is presumably formed by the adsorption of CO₂ on ZrO₂ surface. Hydrogen molecules play a role to supply an atomic hydrogen. Therefore, methane molecules can also be used as a reductant of carbon dioxide.     

Hierarchically organized titanium dioxide nanostructured electrodes: Quantum-sized nanowires grown on nanotubes

Titanium dioxide nanotube electrodes were fabricated by anodization of titanium and decorated with quantum-sized rutile nanowires (2 nm in diameter) by chemical bath deposition. The length of the nanotubes (120 nm in external diameter) was varied between 4 and 10 μm by changing the anodization time. The hierarchically organized electrodes present good mechanical properties and an enhanced capacity for reversible charge accumulation. The photoelectrocatalytic properties of such electrodes have been tested by photo-oxidizing both water and oxalic acid, turning out to be superior to those of bare nanotubes, which are ascribed to an enhanced interfacial area while keeping the favorable transport properties (for both electrons and chemicals) typical of nanotube electrodes.     

Making thiamin work faster: acid-promoted separation of carbon dioxide

The conjugate of thiamin and benzoylformate, mandelylthiamin (MTh), undergoes decarboxylation about 106 times slower than the analogous enzymic intermediate. It has now been discovered that the decarboxylation of MTh is accelerated by the acid component of pyridine and 4-picoline buffers. There is no role for a proton donor to stabilize the transition state for decarboxylation: catalysis must be achieved by the acid's trapping the product carbanion, preventing recarboxylation. This requires that diffusion of CO2 is rate-determining, and that protonation of the carbanion allows this to occur. This interpretation correctly predicts that the same acid components will prevent a fragmentation reaction by protonating the intermediate, which fragments only as the conjugate base.