Highly efficient cyclopalladated ferrocenylimine catalyst for Suzuki cross-coupling reaction of 3-pyridylboronic pinacol ester with aryl halides

The Suzuki cross-coupling reaction of 3-pyridylboronic pinacol ester with aryl iodides, bromides and chlorides was carried out in DMF/H₂O (3/1, v/v) at 110 °C in the presence of cyclopalladated ferrocenylimine I and K₂CO₃ or CsCO₃ (1.0 equiv.) without the protection of inert gas. By using this method the synthesis of 3-pyridyl biaryl compounds could be readily achieved.     

[PdCl2{8-(di-tert-butylphosphinooxy)quinoline)}]: a highly efficient catalyst for Suzuki-Miyaura reaction

The complex [PdCl₂(P-N)] containing the basic and sterically demanding 8-(di-tert-butylphosphinooxy)quinoline ligand (P-N) is a highly efficient catalyst for the coupling of phenylboronic acid with aryl bromides or aryl chlorides. The influence of solvent and base has been investigated, the highest rates being observed at 110 °C in toluene with K₂CO₃ as the base. With aryl bromides the reaction rates are almost independent on the electronic properties of the para aryl substituents, on the contrary, reduced reaction rates are observed when bulky substituents are present on the substrate. Nevertheless the coupling of 2-bromo-1,3,5-trimethylbenzene with phenylboronic acid can be carried out to completion in 2 h using a catalyst loading of 0.02 mol %. Under optimized reaction conditions, turnover frequencies as high as 1900 h⁻¹ can be obtained in the coupling of 4-chloroacetophenone with phenylboronic acid; lower reaction rates are obtained with substrates bearing EDG substituents on the aryl group.     

An efficient and simple Morita-Baylis-Hillman reaction based on the N-methylpyrrolidine-Ba(OH)2 catalytic system

By using of precise catalytic amount of N-methylpyrrolidine (5 mol %) and Ba(OH)₂ (1.5 mol %) in H₂O/CH₃OH 5/1 or CH₃OH/CH₂Cl₂ 3/1 solvent mixtures at T=0 °C a Morita-Baylis-Hillman derivatives could be obtained in good to excellent yield from 2-cyclopenten-1-one, 2-cyclohexen-1-one and formaldehyde and diverse aryl aldehydes after suitable reaction time.     

Sonogashira coupling with aqueous ammonia directed to the synthesis of azotolane derivatives

Sonogashira coupling with aqueous ammonia is tolerable for the reaction of aryl iodides or terminal alkynes bearing an azobenzene group. The reaction of (4-heptyloxyphenyl)ethyne with (4-heptyloxyphenyl)-(4-iodophenyl)diazene in the presence of 1 mol% of PdCl₂(PPh₃)₂, 2 mol% of CuI, and 2 equiv of 0.5 M aqueous ammonia gives the corresponding azotolane in 87% isolated yield after stirring at room temperature for 15 h.     

Copper-catalyzed cross-coupling of aryl iodides and aryl acetylenes using microwave heating

An efficient copper-catalyzed cross-coupling of aryl iodides with aryl acetylenes under microwave irradiation is described. The reaction proceeds under microwave heating with 10 mol % CuI and 2 equiv Cs₂CO₃ in 43-87% yields.     

Ligand-free, atom-efficient Suzuki-Miyaura type cross-coupling reactions at room temperature

The atom-efficient cross-coupling reaction of sodium tetraarylborates with aryl iodides and bromides was reported. The reaction can be performed directly using a catalytic system composed of palladium chloride, sodium carbonate and methanol (PdCl₂/Na₂CO₃/MeOH) under heat-free conditions at room temperature in an open air conditions. The reactions carried out in an atom-efficient way as 4 equiv of aryl halides coupled effectively with 1 equiv of sodium tetraarylborates to furnish 4 equiv of the corresponding functionalized biaryls in good to excellent yields.     

Nickel(II)-aryl complexes as catalysts for the Suzuki cross-coupling reaction of chloroarenes and arylboronic acids

A series of air- and moisture-stable Ni(II)-(σ-aryl) complexes, Ni(PPh₃)₂(aryl)X (X = Cl, Br), were employed as catalyst precursors in the Ni-catalyzed Suzuki cross-coupling reaction. These pre-catalysts easily form the catalytically active Ni(0) species in situ without the need of additional reducing agents. A general catalytic system involving Ni(PPh₃)₂(1-naph)Cl and PPh₃ proved to be highly effective for the Suzuki reaction of aryl chlorides under mild conditions (at 60 °C in THF in the presence of K₂CO₃ as the base).     

Palladium catalyzed alkynylation of aryl halides (Sonogashira reaction) in water

The palladium catalyzed alkynylation of aryl halides (Sonogashira reaction) has been achieved in pure water without any additives or phase transfer catalysts. The reaction, which requires only 0.5 mol % of Pd(PPh₃)₄ catalyst, is remarkably fast (30 min at 70 °C) producing high yields of the aryl alkyne products.     

Cross coupling of 3-bromopyridine and sulfonamides (RNHSO2R·R = H, Me, alkyl; R = alkyl and aryl) catalyzed by CuI/1,3-di(pyridin-2-yl)propane-1,3-dione

N-(3-Pyridinyl)-substituted secondary and tertiary sulfonamides have been synthesized in good to excellent yields by the reaction of 3-bromopyridine with primary and secondary alkyl and aryl sulfonamides (MeSO₂NH₂, MeSO₂NHMe, TolSO₂NH₂, TolSO₂NHMe, 1,3-propanesultam, and 1,4-butanesultam), catalyzed by CuI (20 mol %) and 1,3-di(pyridin-2-yl)propane-1,3-dione (20 mol %) with K₂CO₃ (200 mol %) in DMF (0.17 M for ArBr) at 110-120 °C over 36-40 h. 2-Bromopyridine, 4-bromopyridine, and a wide variety of substituted phenyl bromides can also be successfully coupled with sulfonamides under these reaction conditions.     

Efficient cyanation of aryl bromides with K4[Fe(CN)6] catalyzed by a palladium-indolylphosphine complex

This study describes a general palladium-catalyzed cyanation of aryl bromides using K₄[Fe(CN)₆] as the cyanide surrogate. The reactions can be successfully conducted under mild reaction conditions (at 50 °C) in mixed solvents (water/MeCN = 1:1) without any surfactant additives, and afford the desired aryl nitriles in good-to-excellent yields. Particularly noteworthy is that this system allows the mildest reaction temperature reported so far for palladium-catalyzed cyanation of aryl bromides with K₄[Fe(CN)₆] source in general. Common functional groups, including keto, aldehyde, free amine, and heterocyclic substrates are compatible under this system. Interestingly, the phosphine ligands bearing -PCy₂ moiety, which usually show excellent activity in aryl halide couplings, are found less effective than the corresponding ligands with -PPh₂ group.     

One-pot synthesis of 1,4-diarylsubstituted 1,3-diynes from the sequential coupling reactions of aryl iodides and propiolic acid

1,4-Disubstituted 1,3-dialkynes were obtained from the one-pot palladium/copper-catalyzed coupling reactions of aryl iodide and propiolic acid. The optimized catalytic system consisted of 5.0 mol % Pd(PPh₃)₂Cl₂, 10 mol % dppb, 10 mol % CuI, 2.4 equiv of DBU, and 1.2 equiv of K₂CO₃. The coupling reaction was carried out at 30 °C for 6 h and subsequently at 80 °C for 3 h.     

Efficient ligand-free copper-catalyzed C-S cross-coupling of thiols with aryl iodides using KF/Al2O3 as base

We report a mild, convenient, environmentally friendly, and ligand-free synthetic protocol for the cross-coupling reaction of aryl iodides and thiols using 10 mol % CuI with KF/Al₂O₃ as the base, in DMF at 110 °C. Using this protocol, we have shown that a variety of aryl sulfides can be synthesized in excellent yields from readily available iodides and thiols.     

Palladium-catalyzed homocoupling of aryl halides in the presence of fluoride

This report describes the fluoride-mediated homocoupling of aryl iodides and bromides catalyzed by palladium(0). This coupling protocol is tolerant of electron-donating and electron-withdrawing substitutents on the aryl halide, as well as ortho substitution. Optimum reaction conditions entail 10 mol% Pd(dba)₂, 3 equiv of tetrabutyl ammonium fluoride (TBAF) in DMF at 90 °C.     

A general rhodium-catalyzed cross-coupling reaction of thiols with aryl iodides

The general procedure for the rhodium-catalyzed cross-coupling of thiols with aryl iodides is described. The catalytic system consists of 5 mol % of [RhCl(cod)]₂ and 10 mol % of PPh₃ as a ligand. A variety of aryl iodides reacted with thiols, giving aryl thioethers in good to excellent yields. It is important to note that the deactivated aryl iodides such as 4-iodoanisole is worked smoothly to provide the corresponding aryl thioethers in excellent yields. Functional groups such as free-amines, chloro, are all tolerated under the employed reaction conditions.     

Efficient heterogeneous vinylation of aryl halides using potassium vinyltrifluoroborate

An efficient heterogeneously palladium catalysed procedure for the vinylation of aryl iodides and bromides is reported. Using common reaction conditions (Pd/C 2 mol %, AcONa·3H₂O, NMP or NMP/H₂O), good to complete conversions (40-100%) with high selectivities (79-100%) towards the expected vinylaromatic were achieved.     

Fluoride-Promoted Ligand Exchange in Diaryliodonium Salts

Diaryliodonium salts are shown to undergo rapid, fluoride-promoted aryl exchange reactions at room temperature in acetonitrile. Aryl exchange is shown to be exquisitely sensitive to the concentration of fluoride ion in solution; fast exchange is observed as the fluoride concentration approaches a stoichiometric amount at 50 mM substrate concentration. The reaction is slowed, but not halted if benzene is the solvent, indicating that free fluoride ion or a four-coordinate anionic I(III) species may be responsible for the exchange. The fluoride-promoted aryl exchange reaction is general and allows direct measurement of the relative stabilities of diaryliodonium salts featuring different aryl substituents. The aryl exchange reaction may be of practical use for the preparation of hitherto inaccessible diaryliodonium salts, thus it also has implications for labeling radiotracers for molecular imaging with ¹⁸F-fluoride (t_1/2 = 109.7 min).     

Fluorogenic derivatization of aryl halides based on the formation of biphenyl by Suzuki coupling reaction with phenylboronic acid

The fluorogenic derivatization method for aryl halide was developed for the first time. This method was based on the formation of fluorescent biphenyl structure by Suzuki coupling reaction between aryl halides and non-fluorescent phenylboronic acid (PBA). We measured the fluorescence spectra of the products obtained by the reaction of p-substituted aryl bromides (i.e., 4-bromobenzonitrile, 4-bromoanisole, 4-bromobenzoic acid ethyl ester and 4-bromotoluene) with PBA in the presence of palladium (II) acetate as a catalyst. The significant fluorescence at excitation maximum wavelength of 275–290 nm and emission maximum wavelength of 315–350 nm was detected in all the tested aryl bromides. This result demonstrated that non-fluorescent aryl bromides could be converted to the fluorescent biphenyl derivatives by the coupling reaction with non-fluorescent PBA. We tried to determine these aryl bromides by HPLC-fluorescence detection with pre-column derivatization. The aryl bromide derivatives were detected on the chromatogram within 30 min without any interfering peak derived from the reagent blank. The detection limits (S/N = 3) for aryl bromides were 13–157 fmol/injection.     

Palladium catalyzed synthesis of aryl thiols: sodium thiosulfate as a cheap and nontoxic mercapto surrogate

A Pd-catalyzed coupling reaction of ArBr/ArCl/ArOTf with sodium thiosulfate takes place in presence of Cs₂CO₃ at 80 °C. The reaction mixture is directly treated with Zn/HCl to afford aryl thiols in good to excellent yields.     

Hiyama reaction of aryl bromides with arylsiloxanes catalyzed by a reusable palladium(II)/cationic bipyridyl system in water

A Pd(NH₃)₂Cl₂/cationic bipyridyl catalytic system catalyzed the cross-coupling reaction of aryl bromides with arylsiloxanes in water under aerobic conditions in the presence of NaOH to afford biaryls in good to high yields. The reaction was performed at 120 °C and the loading amount of catalyst can be as low as 0.001 mol %. After extraction, the residual aqueous phase can be reused several times with only a slight decrease in activity.     

Palladium-catalyzed C–S bond formation by using N-amido imidazolium salts as ligands

N-Amido imidazolium salt was employed as a ligand in the palladium-catalyzed cross-coupling reaction of aryl halides and thiols, and showed good activity in the formation of thioether. The best combination for the coupling with aryl bromides was N-amido imidazolium salt 2 and NaHMDS, and that for the coupling with aryl iodides was N-amido imidazolium salt 1 and KO^tBu. The coupling reactions were conducted in the presence of Pd(OAc)₂ (1 mol %) in DMSO at 80 °C for 12 h.