Isolation,Identification and High-Throughput Screening of Neutral Lipid Producing Indigenous Microalgae from South African Aquatic Habitats

Exploring indigenous microalgae capable of producing significant amounts of neutral lipids through high-throughput screening is crucial for sustainable biodiesel production. In this study, 31 indigenous microalgal strains were isolated from diverse aquatic habitats in KwaZulu-Natal, South Africa. Eight superior lipid-producing strains were selected for further analysis, based on Nile red fluorescence microscopy screening. The microalgal isolates were identified to belong to the genera Chlorella, Neochloris and Chlamydomonas via morpho-taxonomic and molecular approach by 18S rRNA gene sequencing. Chlorella vulgaris PH2 had the highest specific growth rate (μ) and lowest doubling time of 0.24 day⁻¹ and 2.89 ± 0.05 day⁻¹, respectively. Chlorella vulgaris T4 had the highest biomass productivity of 35.71 ± 0.03 mg L⁻¹day⁻¹. Chlorella vulgaris PH2 had the highest lipid content of 34.28 ± 0.47 and 38 ± 9.2% (dcw) as determined by gravimetric analysis and the sulfo-phospho-vanillin (SPV) method, respectively. Chlorella vulgaris PH2 exhibited a high content of saturated fatty acids, while Chlorella sp. T4 exhibited a high total content of saturated and monounsaturated fatty acids with a low content of polyunsaturated fatty acids. The preponderance of neutral lipids suggests that Chlorella sp. T4 is a suitable candidate for biomass feedstock for biodiesel production.

     

Organo-sulfonic acid catalyzed degradation kinetics and thermodynamic studies of nylon-6 by hydrothermal method

Nylon-6 as an engineering polymer and its starting monomer are both costly. Chemical reutilization offers some economic and environmental benefits. Depolymerization of nylon-6 was carried out by the conventional technique of hydrothermal method using various organo-sulfonic acids such as Methane sulfonic acid (MSA), para-toluene sulfonic acid (p-TSA), benzene sulfonic acid (BSA), and tetra-butyl ammonium bromide (TBAB) as a phase transfer catalyst. Various parameters such as temperature, time, normality of acids, and phase transfer catalyst concentration were varied to optimize its parameters, and characterization techniques such as amine value titrations and Fourier transform infrared spectroscopy were used for quantitative measurements. Solid-state ¹³C NMR was done for structure confirmation. A chemical kinetics interpretation shows degradation mechanism follows first-order kinetics under various catalysts. MSA has the highest reaction rate of 8.49 × 10^?2 h^?1 at 90°C; it decreases to 7.72 × 10^?2 h^?1 at 100°C. At the same time, aromatic Sulfonic acids such as p-TSA and BSA have a higher reaction rate of 8.995 × 10^?2 h^?1 and 5.582 × 10^?2 h^?1, respectively. The activation energy was lowered as the acidity of organo-sulfonic acids increased as benzene sulfonic acid has the lowest E_a. Followed by p-TSA, and MSA has the highest E_a. Free energy shows a similar kind of value. A simple theoretical model was used to calculate the activation energy. Thermodynamic parameters such as heat of enthalpy and entropy of reaction were evaluated using the Eryig–Polanyi equation. The combined catalytic effect of organo-sulfonic acids and phase-transfer catalyst provides a better environment-friendly method for depolymerizing nylon-6.     

Development of a Temperature Shift Strategy for Efficient Docosahexaenoic Acid Production by a Marine Fungoid Protist, <Emphasis Type="Italic">Schizochytrium</Emphasis> sp. HX-308

Temperature was one of the important environmental factors affecting the biosynthesis of docosahexaenoic acid (DHA; C22:6, ω−3). Generally, a low temperature would slow the strain growth, but promote the accumulation of unsaturated fatty acids. According to this information, the effects of temperature and different two-stage temperature shifting strategies on fatty acid production and DHA content of the marine fungoid protist, Schizochytrium sp. HX-308, were investigated in this study. Finally, the highest DHA percentage was up to 51.98% (per total fatty acids) with the DHA production of 6.05% (per dry cell weight), which was obtained with the method of shifting temperature from 30 °C for 32 h to 20 °C for 12 h.     

Solid polymer electrolytes based on polystyrene‐polyether block copolymers having branched ether structure

To obtain solid polymer electrolytes (SPEs) having high ionic conductivity together with mechanical integrity, we have synthesized polystyrene (PSt)‐polyether (PE) diblock copolymers via one‐pot anionic polymerization. The PSt block is expected to aggregate to act as hard fillers in the SPE to enhance the mechanical property. The PE block consists of random copolymer (P(EO‐r‐MEEGE)) of ethylene oxide (EO) and 2‐(2‐methoxyethoxy) ethyl glycidyl ether (MEEGE) in different molar ratios ([EO]/[MEEGE] = 100/0, 86/14, 75/25, 68/32, and 41/59). The introduction of the MEEGE moiety in PEO reduced the crystallinity of PEO, and the fast motion of the MEEGE side chain caused plasticization of the PE block, thereby contributing to the fast ion transport. SPEs were fabricated by mixing the obtained diblock copolymer (PSE_x) and lithium bis(trifluoromethanesulfonyl) amide (LiTFSA) with [Li]/[O] = 0.05. Ionic conductivity of the obtained SPEs was dependent on the molar ratio of EO in the PE block (x) as well as the weight fraction of PE block (f_PE) in the block copolymer. PSE_0.86 (f_PE = 0.65) exhibited high ionic conductivity (3.3 × 10^?5 S cm^?1 at 30°C; 1.1 × 10^?4 S cm^?1 at 60°C) comparable with that of P(EO‐r‐MEEGE) (PE_0.85; f_PE = 1.00) (9.8 × 10^?5 S cm^?1 at 30°C; 4.0 × 10^?4 S cm^?1 at 60°C).     

Chemically modified proton‐conducting membranes based on sulfonated polyimides: Improved water stability and fuel‐cell performance

A series of branched/crosslinked sulfonated polyimide (B/C‐SPI) membranes were prepared and evaluated as proton‐conducting ionomers based on the new concept of in situ crosslinking from sulfonated polyimide (SPI) oligomers and triamine monomers. Chemical branching and crosslinking in SPI oligomers with 1,3,5‐tris(4‐aminophenoxy)benzene as a crosslinker gave the polymer membranes very good water stability and mechanical properties under an accelerated aging treatment in water at 130 °C, despite their high ion‐exchange capacity (2.2–2.6 mequiv g^?1). The resulting polymer electrolytes displayed high proton conductivities of 0.2–0.3 S cm^?1 at 120 °C in water and reasonably high conductivities of 0.02–0.03 S cm^?1 at 50% relative humidity. In a single H₂/O₂ fuel‐cell system at 90 °C, they exhibited high fuel‐cell performances comparable to those of Nafion 112. The B/C‐SPI membranes also displayed good performances in a direct methanol fuel cell with methanol concentrations as high as 50 wt % that were superior to those of Nafion 112. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3751–3762, 2006     

A Moderately Thermostable Alkaline Phosphatase from Geobacillus thermodenitrificans T2: Cloning, Expression and Biochemical Characterization

A gene-encoding alkaline phosphatase (AP) from thermophilic Geobacillus thermodenitrificans T2, termed Gtd AP, was cloned and sequenced. The deduced Gtd AP protein comprises 424 amino acids and shares a low homology with other known AP (<35% identity), while it exhibits the conservation of the active site and structure element of Escherichia coli AP. The Gtd AP protein, without a predicted signal peptide of 30 amino acids, was successfully overexpressed in E. coli and purified as a hexa-His-tagged fusion protein. The pH and temperature optima for purified enzyme are 9.0 and 65 °C, respectively. The enzyme retained a high activity at 45–60 °C, while it could be quickly inactivated by a heat treatment at 80 °C for 15 min, exhibiting a half-life of 8 min at 70 °C. The K _m and V _max for pNPP were determined to be 31.5 μM and 430 μM/min at optimal conditions. A divalent cation is essential, with a combination of Mg²⁺ and Co²⁺ or Zn²⁺ preferred. The enzyme was strongly inhibited by 10 mM ethylenediaminetetraacetic acid (EDTA) and vanadate but highly resistant to urea and dithiothreitol. The properties of Gtd AP make it suitable for application in molecular cloning or amplification.     

Growth Parameters,Photosynthetic Performance,and Biochemical Characterization of Newly Isolated Green Microalgae in Response to Culture Condition Variations

This work aimed to characterize two native microalgal strains newly isolated from South Mediterranean areas and identified as Chlorella sorokiniana ES3 and Neochloris sp. AM2. The growth properties and biochemical composition of these microalgae were evaluated in different culture media (Algal, BG-11, f/2, and Conway). Among the tested media, nitrate- and phosphate-rich Algal medium provided the maximum biomass productivities (85.5 and 111.5 mg l^?1 day^?1 for C. sorokiniana and Neochloris sp., respectively), while the nitrate- and phosphate-deficient f/2 medium resulted in the highest lipid productivities (24.1 and 35.8 mg l^?1 day^?1 for C. sorokiniana and Neochloris sp., respectively). The physiological state of both microalgae was investigated under different light and temperature levels using the pulse amplitude-modulated fluorometry. The better photosynthetic efficiency of C. sorokiniana was obtained at 23 °C with a light saturation of 156 μE m^?2 s^?1, while that of Neochloris sp. was achieved at 15 °C with a light saturation of 151 μE m^?2 s^?1. The analysis of fatty acid profile and biodiesel parameters revealed that C. sorokiniana, cultivated in Algal and f/2 media, can be considered as a suitable candidate for high-quality biodiesel production.     

DSC analysis of human fat tissue in steroid induced osteonecrosis

Osteonecrosis (ON) of the femoral frequently occurs after steroid medication. One of the final pathways leading to steroid induced ON is thought to be pathologic fat metabolism. The pathobiological mechanism underlying the induction of fat metabolism outslides by steroids leading to ON has not been fully elucidated. The purpose of this study was to examine the intraoperative obtained gluteal fat tissue from ON patients with histology, gas chromatography (GC) and differential scanning calorimetry (DSC) and to compare them with otherwise healthy patient’s samples. The histological sections showed no significant differences compared with the control group. GC revealed that fraction of saturated fatty acids decreased in ON samples from mean values of controls of 24% to 21, the polyunsaturated fraction from 20 to 14%. The monounsaturated acids showed an increase from mean rate of 52% of the controls to 65% of steroid treated samples. DSC curves correlate with chromatographic analysis of the tissue fatty acids (Steroid treated, heating between 0–100°C: T _m=5.7°C, ΔH= −15.8J/g⁻¹; heating between −20–100°C: Tm= −9.96 and 5.85°C, ΔH= −59.17 and −16.2 J g⁻¹. Non-necrotic, heating between 0–100°C: two separable transition with Tm=5.7 and 9.9°C, total ΔH= −20.8 J g⁻¹; heating between −20–100°C: Tm= −10.9 and 4.95°C, total ΔH= −75.8 J g⁻¹.) Our preliminary findings are rather tendentious. Further investigations are needed with higher sample rate and under other anamnestic circumstances too.     

Seasonality in estuarine sources of methylated arsenic

The effect of seasonal temperature change on the release of methylated arsenic from macroalgae, phytoplankton and sediment porewaters has been investigated by a series of controlled laboratory experiments. The appearance of dissolved arsenic species in the overlying waters was monitored using a coupled hydride generation/GC AA analytical technique. The liberation of dissolved arsenic species by the macroalgae Ascophyllum nodosum was examined under estuarine conditions at 5 °C and 15 °C. At the lower temperature the release rates were 0.2 μg kg^?1 h^?1 (wet weight of material) for monomethylarsenic (MMA) and 0.5 μg kg^?1 h^?1 for dimethylarsenic (DMA), whereas at 15 °C the rates were 0.4 μg kg^?1 h^?1 and 3.2 μg kg^?1h^?1, respectively. Incubation experiments were also carried out at 15 °C using the diatom Skeletonema costatum. During the log growth phase, when chlorophyll a concentrations were in the range 1-5 μg dm^?3, the rate of appearance of DMA in the water was ～3 ng dm^?3 h^?1. Sediment samples from the freshwater and seawater end-members of the Tamar Estuary, UK, were incubated under natural conditions at 5 °C and 15 °C. The freshwater sediments released DMA in preference to MMA; the concentrations of both species increased exponentially and reached a steady state in the overlying water after 250 h. Considerably more DMA was produced at 15 °C than at 5 °C, whilst the amount of MMA produced appeared to be insensitive to the temperature increase. In contrast, the seawater sediments always produced more MMA than DMA and the increase in temperature had little effect on the production of either MMA or DMA. The results of the laboratory experiments were compared with field observations in temperate estuaries, including the Tamar Estuary. The implications of changes of water temperature on the fate of arsenic in estuaries is discussed and modifications to the estuarine arsenic cycle are proposed.     

Purification and Biochemical Characterization of a Highly Thermostable Xylanase from <Emphasis Type="Italic">Actinomadura</Emphasis> sp. Strain Cpt20 Isolated from Poultry Compost

An extracellular thermostable xylanase from a newly isolated thermophilic Actinomadura sp. strain Cpt20 was purified and characterized. Based on matrix-assisted laser desorption–ionization time-of-flight mass spectrometry analysis, the purified enzyme is a monomer with a molecular mass of 20,110.13 Da. The 19 residue N-terminal sequence of the enzyme showed 84% homology with those of actinomycete endoxylanases. The optimum pH and temperature values for xylanase activity were pH 10 and 80 °C, respectively. This xylanase was stable within a pH range of 5–10 and up to a temperature of 90 °C. It showed high thermostability at 60 °C for 5 days and half-life times at 90 °C and 100 °C were 2 and 1 h, respectively. The xylanase was specific for xylans, showing higher specific activity on soluble oat-spelt xylan followed by beechwood xylan. This enzyme obeyed the Michaelis–Menten kinetics, with the K _m and k _cat values being 1.55 mg soluble oat-spelt xylan/ml and 388 min⁻¹, respectively. While the xylanase from Actinomadura sp. Cpt20 was activated by Mn²⁺, Ca²⁺, and Cu²⁺, it was, strongly inhibited by Hg²⁺, Zn²⁺, and Ba²⁺. These properties make this enzyme a potential candidate for future use in biotechnological applications particularly in the pulp and paper industry.     

Different Photosynthetic Responses of Pyropia yezoensis to Ultraviolet Radiation Under Changing Temperature and Photosynthetic Active Radiation Regimes

Macroalgae play a crucial role in coastal marine ecosystems, but they are also subject to multiple challenges due to tidal and seasonal alterations. In this work, we investigated the photosynthetic response of Pyropia yezoensis to ultraviolet radiation (PAR: 400–700 nm; PAB: 280–700 nm) under changing temperatures (5, 10 and 15°C) and light intensities (200, 500 and 800 μmol photons m^?2 s^?1). Under low light intensity (200 μmol photons m^?2 s^?1), P. yezoensis showed the lowest sensitivity to ultraviolet radiation, regardless of temperature. However, higher temperatures inhibited the repair rates (r) and damage rates (k) of photosystem II (PSII) in P. yezoensis. However, under higher light intensities (500 and 800 μmol photons m^?2 s^?1), P. yezoensis showed higher sensitivity to UV radiation. Both r and the ratio of repair rate to damage rate (r:k) were significantly inhibited in P. yezoensis by PAB, regardless of temperature. In addition, higher temperatures significantly decreased the relative UV‐inhibition rates, while an increased carbon fixation rate was found. Our study suggested that higher light intensities enhanced the sensitivity to UV radiation, while higher temperatures could relieve the stress caused by high light intensity and UV radiation.     

Experimental study of the ignition temperatures of low-rank coals using TGA under oxygen-deficient conditions

The factors affecting the ignition temperatures of two low-rank coals were experimentally studied using thermogravimetric analysis. The experiments were conducted with coal powders of four different particle size distributions. The thermogravimetric analyzer was operated at three heating rates, 10, 20, and 30 °C min^?1 and four oxygen concentrations of 3, 6, 9, and 12%. The results showed that the ignition temperature decreased by about 25 °C as the oxygen concentration increased from 3% to 12%. The standard deviation of the activation energy was 16.75% at a conversion degree of less than 0.4, and it decreased to 1.35% at the end of the combustion process. At a heating rate of 10 °C min^?1, the ignition temperature increased by about 8 °C as the coal particle size increased by 100 μm. At a heating rate of 30 °C min^?1, the effect of the particle size on the ignition temperature was enhanced and the ignition temperature increased to 15 °C.

     

Radical polymerization behavior of trimethoxyvinylsilane

Trimethoxyvinylsilane (TMVS) was quantitatively polymerized at 130 °C in bulk, using dicumyl peroxide (DCPO) as initiator. The polymerization of TMVS with DCPO was kinetically studied in dioxane by Fourier transform near‐infrared spectroscopy. The overall activation energy of the bulk polymerization was estimated to be 112 kJ/mol. The initial polymerization rate (R_p) was expressed by R_p = k[DCPO]^0.6[TMVS]^1.0 at 120 °C, being closely similar to that of the conventional radical polymerization involving bimolecular termination. The polymerization system involved electron spin resonance (ESR) spectroscopically observable polymer radicals under the actual polymerization conditions. ESR‐determined apparent rate constants of propagation and termination were 13 L/mol s and 3.1 × 10⁴ L/mol s at 120 °C, respectively. The molecular weight of the resulting poly(TMVS)s was low (M_n = 2.0–4.4 × 10³), because of the high chain transfer constant (C_mtr = 4.2 × 10^?2 at 120 °C) to the monomer. The bulk copolymerization of TMVS (M₁) and vinyl acetate (M₂) at 120 °C gave the following copolymerization parameters: r_l = 1.4, r₂ = 0.24, Q₁ = 0.084, and e₁ = +0.80. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5864–5871, 2005     

Kinetic study of crystallization of PHB in presence of hydroxy acids

Poly(3-hydroxybutyrate), PHB, has been structurally modified through reaction with hydroxy acids (HA) such as tartaric acid (TA) and malic acid (MA). The crystallization kinetic of the samples was evaluated by isoconversional method through nonlinear fitting to obtain the estimation for activation energy (E _a ) and pre-exponential (A) values. The thermal behavior of the crystallization temperature, 44.8 and 58.9 °C at 5 °C/min, and results obtained to the average activation energy, 73 ± 9 kJ mol⁻¹ and 63 ± 1 kJ mol⁻¹, to PHB/MA and PHB, respectively, are suggesting that malic acid may be deriving plasticizer units from its own PHB chain. PHB/TA show increase in the medium value of E _a, 119 ± 2 kJ mol⁻¹ and T _c = 48.2 °C (at 5 °C/min), indicating that tartaric acid is probably interacts in different way to the of PHB chain (E _a=73 ± 9 kJ mol⁻¹, T _c = 44.8 °C at 5 °C/min).     

Significantly Improved Expression and Biochemical Properties of Recombinant Serratia marcescens Lipase as Robust Biocatalyst for Kinetic Resolution of Chiral Ester

A lipase gene from Serratia marcescens ECU1010 was cloned into expression vector pET28a, sequenced, and overexpressed as an N terminus His-tag fusion protein in Escherichia coli. Through the optimization of culture conditions in shake flask, the lipase activity was improved up to 1.09 × 10⁵ U/l, which is a great improvement compared to our previous reports. It was purified to homogeneity by Ni-NTA affinity chromatography with an overall yield of 59.4% and a purification factor of 2.4-fold. This recombinant lipase displayed excellent stability below 30 °C and within the pH range of 5.0−6.8, giving temperature and pH optima at 40 °C and pH 9.0, respectively. The lipase activity was found to increase in the presence of metal ions such as Ca²⁺, Cu²⁺, and some nonionic surfactants such as PEG series. In addition, among p-nitrophenyl esters of fatty acids with varied chain length, the recombinant lipase showed the maximum activity on p-nitrophenyl laurate (C₁₂). Using racemic trans-3-(4′-methoxy-phenyl)-glycidyl methyl ester [(±)-MPGM] as substrate, which is a key chiral synthon for production of diltiazem, a 50% conversion yield was achieved after 4 h in toluene–water (100 mM KPB phosphate buffer, pH 7.5) biphasic system (5:5 ml) at 30 °C under shaking condition (160 rpm), affording (−)-MPGM in nearly 100% ee. The K _m and V _max values of the lipase for (±)-MPGM were 222 mM and 1.24 mmol min⁻¹ mg⁻¹, respectively. The above-mentioned features make the highly enantioselective lipase from Serratia marcescens ECU1010 a robust biocatalyst for practical use in large-scale production of diltiazem intermediate.     

Influence of Kenaf (KNF) Loading on Processing Torque and Water Absorption Properties of KNF-Filled Linear Low-Density Polyethylene/Poly (vinyl alcohol) (LLDPE/PVA) Composites

The KNF-filled linear low-density polyethylene composites were prepared by using an internal mixer (Thermo Haake Polydrive) at 150 °C and 50 rpm rotor speed. The composites were mixed with different KNF loading, i.e., 10, 20, 30 and 40 phr. The effects of KNF loading on processing torque and water absorption of the composites were investigated. The results indicated that stabilization torque and water absorption were increased with increasing KNF loading. Composites with higher KNF loading demonstrate higher equilibrium water absorption.     

Biopolymer Synthesized by Strains of Xanthomonas sp Isolate from Brazil Using Biodiesel-Waste

The future supplies and usage of glycerol are expected to increase as biodiesel plants increase production, and the output will greatly outpace demand. Biodiesel production has already had a significant impact on the price of refined glycerol. A major concern of glycerol producers is the reduced price of glycerol resulting from the increased production of biodiesel. Some alternative uses for this glycerol that have been investigated are substrates for fermentation process or the production of biosurfactants, fatty acids, biopolymers, and others products. This work had as objective to evaluate two strains of Xanthomonas sp isolate from Brazil for xanthan gum in orbital agitator, analizing the apparent viscosity of aqueous solutions and selecting viscosity. The experiments of xanthan gum production were realized in orbital agitator with 120 rpm agitation, for cells production, and 180rpm, for biopolymer production, under a 28 °C temperature. The rheology of the fermentation broth was analyzed by apparent viscosity and the polymer was recovered with ethanol (1:3, v/v). After its recovery, the productivity evaluation was performed. The productivity were 0.157 and 0.363 gL⁻¹ for C1 and 0.186 and 0.363 gL⁻¹ for C9 to media glycerol or glycerol and sucrose, respectively. The viscosity analysis was performed for aqueous solutions 3%, at 25 °C, the best apparent viscosity was obtained using gum synthesized with glycerol and sucrose (50:50) at 25 °C, 143 mPa.s⁻¹ from Xanthomonas sp C1.     

Radio-gas-chromatographische Kontrolle des 14C-Acetateinbaus in die Phosphatidfettsäuren der Sojabohnen

Germinating soybeans (glycine max.L.) can be employed to give a good yield of labelled phosphatides. The incorporation of ¹⁴C-acetate into fatty acids of the phosphatides, which under optimal conditions (35°C, 3000 Lux) is about 15%, was radio-gas-chromatographically controlled. It was found that exposure to light causes an increase in the formation of unsaturated fatty acids. Under the influence of a pure oxygen atmosphere at 16°C the phosphatides obtained have about 50% of the ¹⁴C-radioactivity in the oleic acid and 20% in linolic acid. This gives the preconditions necessary to obtain natural phosphatides with unequal distribution of radioactivity in the saturated and unsaturated fatty acids.

     

Stimulation of hydrogen production in algal cells grown under high CO2 concentration and low temperature

When cells ofChlamydomonas sp. MGA 161, a marine green alga, were cultivated at a high CO₂ concentration (15% CO₂) and low temperature (15°C), the growth lag time was much longer, but the starch accumulated was two times higher than under the basal conditions (5% CO₂ 30°C). When the cells grown in the high-CO₂/low-temperature conditions were incubated under dark anaerobic conditions, the degradation of starch and production of hydrogen and ethanol were remarkably higher than those grown under the basal conditions. The lag time of cell growth was shortened, whereas the high capacity of starch accumulation and hydrogen production was maintained, by cultivating the cells alternately every 12 h under the basal and high-CO₂/low-temperature conditions. Using this dual system, in which the cultivation was alternated between the two conditions, the total productivity was significantly improved.     

A Novel Labeling Reagent of 2-(12-Benzo[b]acridin-5-(12H)-yl)-acetohydrazide for Determination of Saturated and Unsaturated Fatty Acids in Traditional Chinese Herbs by HPLC-APCI-MS

A new fluorescence labeling reagent 2-(12-benzo[b]acridin-5(12H)-yl)-acetohydrazide (BAAH) has been designed for fatty acids labeling. Eleven fatty acids containing seven saturated and four unsaturated fatty acids were used to evaluate the analytical potential of this reagent. The labeling reaction of BAAH with fatty acids was completed at 85 °C for 60 min using 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide hydrochloride (EDC·HCl) as the condensing agent. Separation of the derivatized fatty acids was carried out on a reversed-phase Thermo Hypersil Gold C18 column (4.6 mm × 250 mm, 5 μm) in combination with a gradient elution with a good baseline resolution. The fluorescence excitation and emission wavelengths were set at λ_ex 280 and λ_em 510 nm, respectively. The identification was carried out by the online APCI-MS in positive-ion detection mode. Linear correlation coefficients for all fatty acid derivatives were of >0.9994. Detection limits, at a signal-to-noise ratio of 3:1, were 3.89–12.5 nmol L⁻¹ for the labeled fatty acids. The developed method was successfully applied to the accurate determination of fatty acids in five traditional Chinese herbs with satisfactory results.