Response Surface Methodology Based Optimization of β-Glucosidase Production from Pichia pastoris

The thermotolerant yeast Pichia etchellsii produces multiple cell bound β-glucosidases that can be used for synthesis of important alkyl- and aryl-glucosides. Present work focuses on enhancement of β-glucosidase I (BGLI) production in Pichia pastoris. In the first step, one-factor-at-a-time experimentation was used to investigate the effect of aeration, antifoam addition, casamino acid addition, medium pH, methanol concentration, and mixed feed components on BGLI production. Among these, initial medium pH, methanol concentration, and mixed feed in the induction phase were found to affect BGLI production. A 3.3-fold improvement in β-glucosidase expression was obtained at pH 7.5 as compared to pH 6.0 on induction with 1 % methanol. Addition of sorbitol, a non-repressing substrate, led to further enhancement in β-glucosidase production by 1.4-fold at pH 7.5. These factors were optimized with response surface methodology using Box–Behnken design. Empirical model obtained was used to define the optimum “operating space” for fermentation which was a pH of 7.5, methanol concentration of 1.29 %, and sorbitol concentration of 1.28 %. Interaction of pH and sorbitol had maximum effect leading to the production of 4,400 IU/L. The conditions were validated in a 3-L bioreactor with accumulation of 88 g/L biomass and 2,560 IU/L β-glucosidase activity.     

Exploring Thermophilic Cellulolytic Enzyme Production Potential of Aspergillus fumigatus by the Solid-State Fermentation of Wheat Straw

Cellulases can be used for biofuel production to decrease the fuel crises in the world. Microorganisms cultured on lignocellulosic wastes can be used for the production of cellulolytic enzymes at large scale. In the current study, cellulolytic enzyme production potential of Aspergillus fumigatus was explored and optimized by employing various cultural and nutritional parameters. Maximum endoglucanase production was observed after 72 h at 55 °C, pH 5.5, and 70 % moisture level. Addition of 0.3 % of fructose, peptone, and Tween-80 further enhanced the production of endoglucanase. Maximum purification was achieved with 40 % ammonium sulfate, and it was purified 2.63-fold by gel filtration chromatography. Endoglucanase has 55 °C optimum temperature, 4.8 optimum pH, 3.97 mM K _m, and 8.53 μM/mL/min V _max. Maximum exoglucanase production was observed at 55 °C after 72 h, at pH 5.5, and 70 % moisture level. Further addition of 0.3 % of each of fructose, peptone, and Tween-80 enhances the secretion of endoglucanase. It was purified 3.30-fold in the presence of 40 % ammonium sulfate followed by gel filtration chromatography. Its optimum temperature was 55 °C, optimum pH was 4.8, 4.34 mM K _m, and 7.29 μM/mL/min V _max. In the case of β-glucosidase, maximum activity was observed after 72 h at 55 °C, pH 5.5, and 70 % moisture level. The presence of 0.3 % of fructose, peptone, and Tween-80 in media has beneficial impact on β-glucosidase production. A 4.36-fold purification was achieved by 40 % ammonium sulfate precipitation and gel filtration chromatography. Optimum temperature of β-glucosidase was 55 °C, optimum pH was 4.8, K _m was 4.92 mM, and V _max 6.75 μM/mL/min. It was also observed that fructose is better than glucose, and peptone is better than urea for the growth of A. fumigatus. The K _m and V _max values indicated that endoglucanase, exoglucanase, and β-glucosidase have good affinity for their substrates.     

A Recombinant Highly Thermostable β-Mannanase (ReTMan26) from Thermophilic <Emphasis Type="Italic">Bacillus subtilis</Emphasis> (TBS2) Expressed in <Emphasis Type="Italic">Pichia pastoris</Emphasis> and Its pH and Temperature Stability

A gene encoding a highly thermostable β-mannanase from a thermophilic Bacillus subtilis (TBS2) was successfully expressed in Pichia pastoris. The maximum activity of the recombinant thermostable β-mannanase (ReTMan26) was 5435 U/mL, which was obtained by high-density, fed-batch cultivation after 168-h induction with methanol in a 50-L bioreactor. The protein yield reached 3.29 mg/mL, and the protein had a molecular weight of ~42 kDa. After fermentation, ReTMan26 was purified using a 10-kDa cut-off membrane and Sephadex G-75 column. The pH and temperature optima of purified ReTMan26 were pH 6.0 and 60 °C, respectively, and the enzyme was stable at pH 2.0–8.0 and was active at 20–100 °C. HPLC analysis of the products of locust bean gum hydrolysis showed that the mannan-oligosaccharide content was 62.5%. ReTMan26 retained 58.6% of its maximum activity after treatment at 100 °C for 10 min, which was higher than any other β-mannanase reported up to now, suggesting its potential for industrial applications.     

Characterization and High Level Expression of Acidic Endoglucanase in Pichia pastoris

Bioconversion of cellulosic material into glucose needs cellulase enzymes. One of the most important organisms that produces cellulases is Trichoderma reesei, whose cellulose enzymes are probably the most widely used in the industry. However, these enzymes are not stable enough at high pH and temperatures. The optimized synthetic endoglucanase II gene with Pichia pastoris codon preferences was secretary expressed in P. pastoris. Recombinant enzyme characterization showed maximum activity at pH 4.8 and temperature 75 °C, and it demonstrated increasing thermal stability in high temperature. The enzyme maintained its activity in a wide pH range from 3.5 to 6.5. The optimization of fermentation medium was carried out in shaking flasks. Recombinant protein expression at optimum conditions (pH 7, temperature 25 °C, and 1 % methanol induction) for 72 h demonstrated 2,358.8 U/ml endoglucanase activity units. To our knowledge, this is the highest acidic thermophilic endoglucanase activity that is reported in crude intracellular medium in P. pastoris. We conclude that P. pastoris is an appropriate host for high-level expression of optimized endoglucanase gene with improved thermal stability.     

Preliminary Studies for Cephamycin C Purification Technique

A study was made for purification of cephamycin C from fermentation of Streptomyces clavuligerus. Initially, the culture broth was clarified by microfiltration and ultrafiltration, after which the resulting permeates were subjected to nonspecific adsorption and ion-exchange chromatography on resin columns. The antibiotic activity was measured by the biological method at each stage by assaying its activity against the Escherichia coli ESS, super sensitive to β-lactam antibiotic. The purification processes were assessed in relation to the variables affecting each step. The purification efficiency by nonspecific adsorption was monitored by UV spectrophotometry, while the ion-exchange adsorption fractions were assessed by NMR spectroscopy. Some of the fractions obtained during purification were also analyzed by mass spectrometry (LC/MS and LC/MS/MS) to identify the cephamycin C molecule. These preliminary results proved the process feasibility.     

Cloning of LicB from Clostridium thermocellum and its efficient secretive expression of thermostable β-1,3-1,4-glucanase

β-1,3-1,4-glucanase is a widely used enzyme in brewing and in animal feed processing. To produce the bacterial enzyme at an industrial scale, the enzyme should be able to be secreted from microbial cells into fermentation broth and be stable in different conditions. In this study, the LicB gene encoding β-1,3-1,4-glucanase (lichenase) from Clostridium thermocellum was secretively expressed in a secretive strain, Bacillus subtilis WB800, with eight extracellular protease deletion which made LicB expressed obviously and reached 1.18 U/g cell mass. The secreted β-1,3-1,4-glucanase was found to be active from 40 °C to 80 °C and achieved the optimal activity at 80 °C. The enzyme also has a wide pH range (pH 4–11). The most common metal ions and chemicals were found to be inert on its activity. The property of LicB-encoded β-1,3-1,4-glucanase and its efficient secretive expression makes it a potential enzyme for industrial production and application.     

Molecular Cloning,Characterization, and Dye-Decolorizing Ability of a Temperature- and pH-Stable Laccase from Bacillus subtilis X1

Laccases from fungal origin are typically unstable at high temperatures and alkaline conditions. This characteristic limits their practical applications. In this study, a new bacterial strain exhibiting laccase activity was isolated from raw fennel honey samples and identified as Bacillus subtilis X1. The CotA-laccase gene was cloned from strain X1 and efficiently expressed in Escherichia coli in a biologically active form. The purified recombinant laccase demonstrated an extensive pH range for catalyzing substrates and high stability toward alkaline pH and high temperatures. No loss of laccase activity was observed at pH 9.0 after 10 days of incubation, and approximately 21 % of the initial activity was detected after 10 h at 80 °C. Two anthraquinonic dyes (reactive blue 4 and reactive yellow brown) and two azo dyes (reactive red 11 and reactive brilliant orange) could be partially decolorized by purified laccase in the absence of a mediator. The decolorization process was efficiently promoted when methylsyringate was present, with more than 90 % of color removal occurring in 3 h at pH 7.0 or 9.0. These unusual properties indicated a high potential of the novel CotA-laccase for industrial applications.     

Production of Xylooligosaccharides by Immobilized His-tagged Recombinant Xylanase from Penicillium occitanis on Nickel-Chelate Eupergit C

Penicillium occitanis xylanase 2 expressed with a His-tag in Pichia pastoris, termed PoXyn2, was immobilized on nickel-chelate Eupergit C by covalent coupling reaction with a high immobilization yield up to 93.49 %. Characterization of the immobilized PoXyn2 was further evaluated. The optimum pH was not affected by immobilization, but the immobilized PoXyn2 exhibited more acidic and large optimum pH range (pH 2.0–4.0) than that of the free PoXyn2 (pH 3.0). The free PoXyn2 had an optimum temperature of 50 °C, whereas that of the immobilized enzyme was shifted to 65 °C. Immobilization increased both pH stability and thermostability when compared with the free enzyme. Time courses of the xylooligosaccharides (XOS) produced from corncob xylan indicated that the immobilized enzyme tends to use shorter xylan chains and to produce more xylobiose and xylotriose initially. At the end of 24-h reaction, XOS mixture contained a total of 21.3 and 34.2 % (w/w) of xylobiose and xylotriose with immobilized xylanase and free xylanase, respectively. The resulting XOS could be used as a special nutrient for lactic bacteria.     

Impact of environmental conditions on the sorption behavior of Pb(II) onto attapulgite

This paper examined the application of attapulgite as an adsorbent for the removal of Pb(II) from heavy metal-contaminated water under various conditions. The sorption results indicated that the sorption of Pb(II) on attapulgite was strongly dependent on ionic strength at pH < 7.0. Outer-sphere surface complexation or ion exchange may be the main sorption mechanism of Pb(II) on attapulgite at low pH values. No drastic difference of Pb(II) sorption was observed at pH 7.0–10.0, and the sorption at pH > 10.0 was mainly dominated by inner-sphere surface complexation. The sorption of Pb(II) on attapulgite was affected by foreign ions in solution at pH < 7.0, and was not affected by foreign ions at pH > 7.0. The thermodynamic parameters (ΔH°, ΔS° and ΔG°) were evaluated from the temperature-dependent sorption isotherms, and the results indicated that the sorption process of Pb(II) on attapulgite was spontaneous and endothermic in nature.     

A study on the inclusion complexation of 3,4,5-trihydroxybenzoic acid with β-cyclodextrin at different pH

Effect of β-cyclodextrin (β-CD) on the absorption and fluorescence spectra of 3,4,5-trihydroxybenzoic acid (THB) have been studied buffer solutions of different pHs (pH ~1, pH ~7 and pH ~10). The study reveals that in all the above pHs THB forms 1:1 inclusion complex. The hydroxyl groups are present in the interior part of the β-CD cavity and carboxyl group is present in the hydrophilic part of the β-CD cavity. Dual luminescence is observed at pH ~1 and pH ~7 solutions which shows that intramolecular charge transfer present at these pH. The broad spectral maximum at pH ~10 indicates that intramolecular proton transfer is present in THB.     

Biodecolorization of Azo Dye Remazol Orange by Pseudomonas aeruginosa BCH and Toxicity (Oxidative Stress) Reduction in Allium cepa Root Cells

In this report a textile azo dye Remazol orange was degraded and detoxified by bacterium Pseudomonas aeruginosa BCH in plain distilled water. This bacterial decolorization performance was found to be pH and temperature dependent with maximum decolorization observed at pH 8 and temperature 30 °C. Bacterium tolerated higher dye concentrations up to 400 mg?l^?1. Effect of initial cell mass showed that higher cell mass concentration can accelerate decolorization process with maximum of 92 % decolorization observed at 2.5 g?l^?1 cell mass within 6.5 h. Effect of various metal ions showed Mn has inducing effect whereas Zn strongly inhibited the decolorization process at 5 mM concentration. Analysis of biodegradation products carried out with UV–vis spectroscopy, HPTLC and FTIR confirmed the decolorization and degradation of Remazol orange. Possible route for the degradation of dye was proposed based on GC-MS analysis. During toxicological scrutiny in Allium cepa root cells, induction in the activities of superoxide dismutase (SOD), guaiacol peroxidase (GPX) and inhibition of catalase (CAT) along with raised levels of lipid peroxidation and protein oxidation in dye treated samples were detected which conclusively indicated the generation of oxidative stress. Less toxic nature of the dye degraded products was observed after bacterial treatment.     

RP-LC Determination of Residual Monomers in Polycarboxylate Superplasticizers

A procedure was developed for the determination of residual monomers in polycarboxylate superplasticizer by reversed-phase high performance liquid chromatography. Seven kinds of residual monomers were quantitatively determined on a SinoChrom ODS-BP (C18) column and UV detector at 205 nm. The mobile phases which were used to determine micromolecular monomers were composed of acetonitrile and phosphate buffer solution (0.05 mol L^?1, pH = 3) in the ratio of 8:92 (v/v). While the mobile phases for long side-chain monomers testing were composed of acetonitrile and phosphate buffer solution (0.05 mol L^?1, pH = 6.5) in the ratio of 40:60 (v/v). The linear response ranged from 4.0 × 10^?6?C2.0 × 10^?3 mol L^?1. The detection limit was 0.12 × 10^?5?C0.8 × 10^?5 mol L^?1. Determination of real samples showed that relative standard deviation of high conversion rate samples was 3.1?C8.7% and standard addition recovery ratio was 91.5?C102.8%. While the relative standard deviation of low conversion rate samples was less than or close to 1% and the standard addition recovery ratio was 96.3?C103.1%.     

On <Emphasis Type="Italic">Trans</Emphasis>-Resveratrol in Aqueous Solutions

A thermodynamic study on aqueous solutions of trans-Resveratrol (3,5,4′-trihydroxy-trans-stilbene) at 25.00 ± 0.02 °C, in 0.5 mol·dm^?3 NaCl, has been conducted. The protolysis equilibria and the complex formation between trans-Resveratrol and a metal(II), namely Mn²⁺ and Cu²⁺, have been investigated. The experimental method consists of potentiometric, spectrophotometric (absorption and emission) acid–base titrations. The pH range investigated is 2.5 ≤ pH ≤ 13 for the binary system, while for the ternary system it is 2.5 ≤ pH ≤ 6. The results of the graphical and numerical methods adopted indicate, for all the systems investigated, the formation of a predominant Me(II)–trans-Resveratrol mononuclear complex. UV–Vis absorption spectra and desorption/ionization time of flight mass spectra show the occurrence of hydrolytic species exhibiting a higher molecular weight than the Resveratrol molecule, becoming more evident as the pH and the time increased. Moreover, high performance liquid chromatography analysis and infrared spectroscopy of aqueous cis/trans-Resveratrol solutions upon excitation at 300 nm have highlighted a highly fluorescent compound, with absorption maximum at 250 nm, and a blue shift in the fluorescence emission that have not previously been reported.     

Complexation of Ketoconazole by Native and Modified Cyclodextrins

Complexation of ketoconazole (KET), a broad-spectrum antifungal drug, with β- and γ-cyclodextrins (CDs), heptakis (2,6-di-O-methyl)-β-CD (2,6-DM-β-CD), heptakis (2,3,6-tri-O-methyl)-β-CD (TM-β-CD), 2-hydroxypropyl-β-CD (2HP-β-CD) and carboxymethyl-β-CD (CM-β-CD) was studied. The stability constants were determined by the solubility method at pH = 6 and for 2,6-DM-β-CD and CM-β-CD at pH = 5. At pH = 6, the stability constants increased in the order: TM-β-D < γ-CD < 2HP-β-CD < β-CD < CM-β-CD < 2,6-DM-β-CD. At pH = 5, due to the increased ionization of KET, the stability constant with CM-β-CD increased and with 2,6-DM-β-CD decreased. For complexes of KET with 2HP-β-CD and 2,6-DM-β-CD, the thermodynamic parameters of complexation were determined from the temperature dependence of the corresponding stability constants. For β–γ and TM-β-CD complexes, calculations using HyperChem 6 software by the Amber force field were carried out to gain some insight into the host–guest geometry.     

Development of a direct ELISA based on carboxy-terminal of penicillin-binding protein BlaR for the detection of β-lactam antibiotics in foods

β-Lactam antibiotics, including penicillins and cephalosporins, are commonly used in veterinary medicine. Illegal use and abuse of β-lactams could cause allergy and selected bacterial resistance. BlaR-CTD, the carboxy-terminal of penicillin-recognizing protein BlaR from Bacillus licheniformis ATCC 14580, was utilized in this study to develop a receptor-based ELISA for detection and determination of β-lactam antibiotics in milk, beef, and chicken. This assay was based on directly competitive inhibition of binding of horseradish peroxidase-labeled ampicillin to the immobilized BlaR-CTD by β-lactams. The assay was developed as screening test with the option as semiquantitative assay, when the identity of a single type of residual β-lactam was known. The IC₅₀ values of 15 β-lactam antibiotics, including benzylpenicillin, ampicillin, amoxicillin, dicloxacillin, oxacillin, nafcillin, cefapirin, cefoperazone, cefalotin, cefazolin, cefquinome, ceftriaxone, cefotaxime, cefalexin, ceftiofur and its metabolite desfuroylceftiofur were evaluated and ranged from 0.18 to 170.81 μg L^?1. Simple sample extraction method was carried out with only phosphate-buffered saline, and the recoveries of selected β-lactam antibiotics in milk, beef, and chicken were in the range of 53.27 to 128.29 %, most ranging from 60 to 120 %. The inter-assay variability was below 30 %. Limits of detection in milk, beef, and chicken muscles with cefquinome matrix calibration were 2.10, 30.68, and 31.13 μg kg^?1, respectively. This study firstly established a rapid, simple, and accurate method for simultaneous detection of 15 β-lactams in edible tissues, among which 11 β-lactams controlled by European Union could be detected below maximum residue limits.

Cloning,Overexpression, and Characterization of a High Enantioselective Nitrilase from Sphingomonas wittichii RW1 for Asymmetric Synthesis of (R)-Phenylglycine

In this study, a high (R)-enantioselective nitrilase gene from Sphingomonas wittichii RW1 was cloned and overexpressed in Escherichia coli BL21 (DE3). The recombinant nitrilase was purified to homogeneity with a molecular weight of 40 kDa. The pH and temperature optima were shown to be pH 8.0 and 40 °C, respectively. The purified nitrilase was most active toward succinonitrile, approximately 30-fold higher than that for phenylglycinonitrile. Using the E. coli BL21/ReSWRW1 whole cells as biocatalysts, the kinetic resolution for asymmetric synthesis of (R)-phenylglycine was investigated at pH 6.0. A yield of 46 % was obtained with 95 % enantiomeric excess (ee), which made it a promising biocatalyst for synthesis of (R)-phenylglycine.     

Performance and Bacterial Population Composition of an n-Hexane Degrading Biofilter Working Under Fluctuating Conditions

In this work, several conditions of pH and inlet load (IL) were applied to a scale laboratory biofilter treating n-hexane vapors during 143 days. During the first 79 days of operation (period 1, P1), the system was fed with neutral pH mineral medium (MM) and the IL was progressively decreased from 177 to 16 g m^?3 h^?1. A maximum elimination capacity (EC) of 30 g m^?3 h^?1 was obtained at an IL of 176.9?±?9.8 g m^?3 h^?1. During the following 64 days (period 2, P2), acidic conditions were induced by feeding the biofilter with acidic buffer solution and pH 4 MM in order to evaluate the effect of bacterial community changes on EC. Within the acidic period, a maximum EC of 54 g m^?3 h^?1 (IL 132.3?±?13 g m^?3 h^?1) was achieved. Sequence analysis of 16S rDNA genes amplified from the consortium revealed the presence of Sphingobacteria, Actinobacteria, and α-, β- and γ-Proteobacteria. An Actinobacteria of the Mycobacterium genus had presence throughout the whole experiment of biofiltration showing resistance to fluctuating pH and IL conditions. Batch tests confirm the bacterial predominance and a negligible contribution of fungi in the degradation of n-hexane.     

Improvement of Strain Penicillium sp. EZ-ZH190 for Tannase Production by Induced Mutation

In the search for an efficient producer of tannase, Penicillium sp. EZ-ZH190 was subjected to mutagenesis using heat treatment and strain EZ-ZH290 was isolated. The maximum tannase in this mutant strain was 4.32 U/mL with an incubation period of 84 h as compared to wild strain EZ-ZH190 where the incubation period was 96 h with a maximum enzyme activity of 4.33 U/mL. Also, the Penicillium sp. EZ-ZH290 tannase had a maximum activity at 40 °C and pH 5.5. Then, the spores of strain EZ-ZH290 were subjected to γ irradiation mutagenesis and strain EZ-ZH390 was isolated. Strain EZ-ZH390 exhibited higher tannase activity (7.66 U/mL) than the parent strain EZ-ZH290. It was also found that Penicillium sp. EZ-ZH390 tannase had an optimum activity at 35 °C and a broad pH profile with an optimum at pH 5.5. The tannase pH stability of Penicillium sp. EZ-ZH390 and its maximum production of tannase followed the same trend for five generations confirming the occurrence of stable mutant. This paper is shown that γ irradiation can mutate the Penicillium sp. leading to increase the tannase production.     

Atmospheric Pressure Plasma Degradation of Azo Dyes in Water: pH and Structural Effects

The degradation of aqueous solutions containing azo dyes (ortho-, meta-, and para-methyl red) was carried out by means of atmospheric pressure plasma treatment. As evidenced by optical emission spectroscopy, the metastable argon in the discharge is responsible for initiating reactions in dye solutions. The bleaching of aqueous solutions is attributed to the destruction of dye molecules as observed in the UV–visible absorption spectra. We found that the degradation pathways of methyl red critically depend on the pH values in aqueous solutions as well as isomeric structures. The reaction pathways are entirely different in basic (pH = 11), near-neutral (pH = 6), and acidic conditions (pH = 2). Kinetic analysis shows that acidic condition gives the fastest degradation rates of methyl red isomers with removal rate: ortho > meta > para among all conditions. At basic condition, the degradation rates are equally slow for all methyl red isomers.     

Production and Characterization of a Novel Yeast Extracellular Invertase Activity Towards Improved Dibenzothiophene Biodesulfurization

The main goal of this work was the production and characterization of a novel invertase activity from Zygosaccharomyces bailii strain Talf1 for further application to biodesulfurization (BDS) in order to expand the exploitable alternative carbon sources to renewable sucrose-rich feedstock. The maximum invertase activity (163 U ml^?1) was achieved after 7 days of Z. bailii strain Talf1 cultivation at pH 5.5–6.0, 25 °C, and 150 rpm in Yeast Malt Broth with 25 % Jerusalem artichoke pulp as inducer substrate. The optimum pH and temperature for the crude enzyme activity were 5.5 and 50 °C, respectively, and moreover, high stability was observed at 30 °C for pH 5.5–6.5. The application of Talf1 crude invertase extract (1 %) to a BDS process by Gordonia alkanivorans strain 1B at 30 °C and pH 7.5 was carried out through a simultaneous saccharification and fermentation (SSF) approach in which 10 g l^?1 sucrose and 250 μM dibenzothiophene were used as sole carbon and sulfur sources, respectively. Growth and desulfurization profiles were evaluated and compared with those of BDS without invertase addition. Despite its lower stability at pH 7.5 (loss of activity within 24 h), Talf1 invertase was able to catalyze the full hydrolysis of 10 g l^?1 sucrose in culture medium into invert sugar, contributing to a faster uptake of the monosaccharides by strain 1B during BDS. In SSF approach, the desulfurizing bacterium increased its μ_max from 0.035 to 0.070 h^?1 and attained a 2-hydroxybiphenyl productivity of 5.80 μM/h in about 3 days instead of 7 days, corresponding to an improvement of 2.6-fold in relation to the productivity obtained in BDS process without invertase addition.