Stereochemical control of calixarenes useful as rigid and conformationally diversiform platforms for molecular design

Stereochemical problems and related functions of calix[4]arenes, calix[6]arenes and their chiral derivatives have been reviewed. In p-tert-butylcalix[4]arene (1H₄) and its mono-, di-, tri-, and tetra-O-alkyl derivatives (1H₃R, 1H₂R₂,1HR₃, and 1R₄, respectively), 23 different homologues can exist (including 1H₄). We found that the OH group in the unmodified phenol unit is permeable through the calix[4]arene ring. Thus, several conformational isomers become equivalent after the ‘oxygen-through-the-annulus’ rotation of the OH group and the number of possible homologues is reduced to 13 (including 1H₃). We report in this paper the syntheses of all of these possible conformational isomers using a protection-deprotection method with a benzyl group and metal template effects. On the other hand, all possible chiral isomers that can be derived from calix[4]arene by modification of the OH groups have been systematically classified. Molecular asymmetry can be generated not only by different substituents but also by conformational isomerism. The numbers of chiral isomers are 17 for tetra-O-substituted calix[4]arenes, 9 for tri-O-substituted calix[4]arenes, 3 for di-O-substituted calix[4]arenes, and 0 for mono-O-substituted calix[4]arenes. Chiral calix[4]arenes can also be designed by the introduction of a substituent into the m-position of a phenol unit or by the use of a dissymmetric ‘stapling reaction’ in proximal phenol units. In p-tert-butylcalix[6]arene, the conformational behaviour is totally different from that in p-tert-butylcalix[4]arene. A large degree of conformational freedom remains in the framework, and both ‘oxygen-through-the-annulus rotation’ and ‘para-substituent-through-the-annulus rotation’ can take place. However, when metal cations are bound to calix[6]aryl esters, the conformation is changed to a cone type. Bridging and capping are powerful methods to immobilize the conformation of calix[6]arenes. In addition, definitive evidence for ring immobilization was obtained from the absence of racemization in the chiral calix[6]arene. A successful example of chiral recognition for α-amino acid derivatives was achieved by using chiral homooxacalix[3]arene which has ‘pseudo C₂ symmetry’. These examples indicate that calixarenes serve as rigid and conformationally diversiform platforms for the design of novel functional supramolecules.     

Synthesis of novel p-tert-butyl-calix[4]arene derivatives and their cation binding ability: chromogenic effect upon side arms binding

A series of novel double-armed calix[4]arene derivatives, i.e. 5,11,17,23-tetra-tert-butyl -25,27-bis[2-[(2-hydroxy-5-(4-nitroazo)benzylidene)amino]ethoxy]-26,28-dihydroxy-calix[4]-arene (4), 5,11,17,23-tetra-tert-butyl-25,27-bis[2-[(2-hydroxy-5-(2-nitroazo)benzylidene) amino]ethoxy]-26,28-dihydroxycalix[4]arene (5), 5,11,17,23-tetra-tert-butyl-25,27-bis[2-[(2-hydroxy-5-(4-chloroazo)benzylidene)amino]ethoxy]-26,28-dihydroxycalix[4]arene (6), have been synthesized as an selective chromoionophore for Na⁺. The complexation behavior of ligands 4-6 with alkali metal ions Na⁺, K⁺, Rb⁺and Cs⁺ has been evaluated by using UV-Vis spectrometry in CH₃CN-H₂O (99:1/V:V) solution at 25°C. The UV-Vis spectra show that the complexation of 4-6 with Na⁺exhibits obvious bathochromic shifts (λ_max 379→480 nm) and there is a unique color change in the solution from yellow to red upon complexation. The binding constants for Na⁺ are higher than that of other alkali metal ions, giving the highest cation selectivity up to 7 for Na⁺/K⁺. The binding ability and photophysical behavior of alkali cations by calix[4]arene derivatives 4-6 are discussed from the point of view of substituted effects at the lower rim of parent calix[4]arene and size-fit concept between host calix[4]arenes and guest cations.     

Selective functionalization at the small rim of calix[6]arene. Synthesis of novel non-symmetrical N3, N4 and N3ArO biomimetic ligands

Eight novel calix[6]arene-based biomimetic ligands for transition metal ions have been synthesized. They display a non-symmetrical N₃, N₄ or N₃ArO binding core that mimics enzyme active sites presenting histidine and tyrosine residues. The key step for their synthesis is the mono-alkylation at the small rim of the C_3v symmetrical trimethyl ether derivative of tBu-calix[6]arene with N-Boc-2-chloroethylamine to yield a novel calix[6]arene synthon. Its combined O-alkylation with a chloromethyl aromatic amine and N-deprotection or alkylation or reductive alkylation with a salicylaldehyde derivative yielded the calix[6]arene-based ligands with mixed N/O donors.     

Effect of the glutaraldehyde derivatives of Calix[n]arene as cross-linker reagents on lipase immobilization

Synthesis of the glutaraldehyde derivatives calix[n]arene (n = 4,6,8) (Calix[n]-GA) and using as cross-linkers for immobilization of Candida rugosa lipase (CRL) have been discussed in this paper. The amino functional calix[n]arene derivatives (Calix[n]-NH ₂) were synthesized via reduction of dinitrile, hexanitrile and octanitrile derivatives of calix[n]arenes. These amino functional calix[n]arene derivatives (Calix[n]-NH ₂) were converted to their aldehyde derivativatives with glutaraldehyde. The calix[n]arene derivatives were used in lipase immobilization in order to see the role of calix[n]arene binding site on the lipase activitiy and stability. The activity recovery of calix[n]arene-supported lipases (Calix[n]-CRL) based on the Calix[4]-CRL, Calix[6]-CRL and Calix[8]-CRL reaches to 53.5, 66.1 and 76.4%, respectively.     

Synthesis of cesium selective pyridyl azocalix[n]arenes

A series of pyridylazo calix[n]arenes (n=4, 6, 8) including the first examples of mixed hetroaryl azocalix(n)arenes have been synthesized by coupling calix[n]arenes with diazonium salts derived from amino pyridines. It has been observed that the coupling reaction of diazonium salt obtained from 3-aminopyridine with calix[n]arene gives tetrakis-, hexakis- and octakis (pyridylazo)calix[n]arenes (n=4,6,8) while those derived from 4-aminopyridine give partially substituted (4-pyridylazo)calix[n]arene analogs. There is no reaction of calix(n)arenes with diazonium salts derived from 2-aminopyridine under identical conditions of experiments. The conformational analysis of synthesized compounds have been ascertained by detailed spectral measurements and single crystal X-ray analysis of 5-(3′-pyridylazo)-25,26,27,28-tetrahydroxycalix[4]arene. A rational explanation for the observed partial and exhaustive coupling reaction in the synthesis of heteroaryl azocalix(n)arenes has been suggested. Preliminary evaluation of synthesized derivatives as molecular receptors for metal ions indicates that they have good potential to function as selective ionic filters for cesium ions.     

Ab initio and density functional studies of cooperative hydrogen bonding in calix[4]-and calix[6]arenes

The cone conformation of C ₄ symmetry is shown by the Hartree-Fock method (3-21G basis) to be the predominant conformer of calix[4]arene; the compressed cone of C ₂ symmetry is the major conformer of calix[6]arene. Using quantum chemical methods we calculated hydrogen bond cleavage energies for calix[4]-(ab initio and density functional methods) and calix[6]arene (ab initio), and also for the complex of calix[4]arene with carbon disulfide. These energies along with structural data point to the cooperative effect of hydrogen bonds. The results of these studies provided an explanation to the greater conformational lability of calix[6]arene compared with calix[4]arene molecules. It is also predicted that the nucleophilic substitution reaction involving calix[6]arene in the presence of weak bases and in aprotic solvents, as well as in the gas phase, will occur via diastereomeric transition states.     

Inherently chiral biscalixarene cone–cone conformers consisting of calix[4]arene and calix[5]arene subunits

Inherently chiral biscalixarenes with hetero-cavities were synthesized by a covalent assembly of p-tert-butylcalix[5]arene with a 1,3-substituted calix[4]arene via 1,3-alkylation reaction and subsequent desymmetrization. The racemates were resolved by chiral HPLC method. ¹H NMR spectra, VT-NMR spectra, and theoretical calculations support that the calix[5]arene subunit of the inherently chiral calix[4][5]arene ester adopts a cone-in conformation, with the aromatic ring bearing the CH₂CO₂Et group tilting inward the calix[5]arene cavity. By contrast, such a cone-in structural feature of the calix[5]arene subunit disappears for the corresponding inherently chiral calix[4][5]arene carboxylic acid, due to the intramolecular hydrogen bonding between the carboxyl group and an ethereal oxygen of the glycolic chain.     

Aminolysis of p-tert-butyltetrathiacalix[4]arene tetraethylacetates in cone, partial cone and 1,3-alternate conformation: synthesis of amide based receptors for oxyanions

Cone, partial cone and 1,3-alternate conformers of tetrathiacalix[4]arene tetraethylacetate were synthesized and subjected to aminolysis with alkyl amines [CH₃(CH₂)_nNH₂; n=2, 3, 5] to yield mono-, di-, tri- or tetrasubstituted p-tert-butyltetrathiacalix[4]arene amides which were characterized by detailed analysis of their NMR spectral and single crystal X-ray crystallography. It has been observed that while the 1,3-alternate and cone conformers of the tetrathiacalix[4]arene tetraethylacetate gave corresponding tetrathiacalix[4]arene tetraamides under different experimental conditions, the corresponding partial cone conformer undergoes a cascade of regioselective reactions with the same amines. Variable temperature ¹H NMR experiments allowed the determination of relative stability of different conformers within the temperature range of 298-333 K. The synthesized derivatives were evaluated as molecular extractants for cations and anions and were determined to facilitate extraction of oxyanions (CrO₄²⁻ and Cr₂O₇²⁻) from aqueous to the organic phase. The studies have a significance in the design of tetrathiacalix[n]arene based molecular receptors for innovative applications.     

Synthesis, characterization and electrochemical properties of two new calix[4]arene derivatives bearing two ferrocene imine or ferrocene amine units at the upper rim

A novel calix[4]arene derivative with two ferrocenyl Schiff-base groups at the upper rim 3 has been synthesized from 5,17-diformyl-25,27-dipropoxy-26,28-dihydroxy calix[4]arene and 4-ferrocenylaniline via condensation reaction. Reduction of 3 with sodium borohydride led to calix[4]arene derivative 4 with two amino ferrocenyl groups at the upper rim. The ferrocenyl Schiff-base calix[4]arene and its corresponding reduced amine have been purified and characterized by elemental analysis,¹H NMR, FTIR, Mass and UV-vis spectral data. Electrochemical properties of compounds 3 and 4 have been investigated. Cyclic voltammograms of 3 and 4 show reversible redox couples of ferrocene/ferrocinium at E_1/2=0.401 V and 0.346 V, respectively. Electrochemical studies show these redox active compounds electrochemically recognize trivalent lanthanides La³⁺ and Ce³⁺ and divalent Pb²⁺ and Cu²⁺cations. With ferrocenyl Schiff-base calix[4]arene 3 an anodic shift as large as 130 mV is observed on addition of one equivalent of Ce³⁺ ion. Also extraction properties of compound 4 towards some metal cations have been described. It has been observed that compound 4 has a good selectivity for metal cations Fe³⁺, Cu²⁺, Pb²⁺ and Cd²⁺ against Ni²⁺ and Co²⁺.     

Polymer-supported calix[4]arenes for sensing and conversion of NO2/N2O4

The use of simple calix[4]arenes 1a,b for NO₂/N₂O₄ sensing and conversion is demonstrated, both in solution and in the solid state. Upon reacting with these gases, compounds 1a,b encapsulate reactive NO⁺ cations within their cavities with the formation of deeply colored (λ_max∼570 nm) charge-transfer complexes 2a,b. Further functionalization of the calix[4]arene platform is reported for attachment to solid supports. Polymer-supported calixarene material 3 was prepared, which reversibly traps NO₂/N₂O₄ with the formation of nitrosonium storing polymer 4. Material 4 was effectively used for nitrosation of amides.     

Selectively formylated and bridged calix[6]arene derivatives at the upper rim

The strategy of bridging the anisole units at the upper rim of calix[6]arene has been applied to strain the conformations of calix[6]arene. Based on the selective formylation of the 1,3,5-tri-p-tert-butylcalix[6]arene, several new calix[6]arene derivatives with different 1,3-bridged chains or a 1,3,5-tripod bridge at the upper rim have been prepared with moderate yields. The ¹H NMR spectra indicate that these calix[6]arene derivatives adopt a cone conformation, which has also been confirmed by the theoretical calculation at AM1 level. X-ray crystal structure of 1,3,5-tripod bridged compound 5 discloses that the calix[6]arene host stands in a cone conformation with approximate C_3v symmetry, and that a methanol molecule is enclosed in its hydrophobic cavity and stabilized by multi hydrogen bonds.     

Synthesis of novel chiral Schiff base and amino alcohol derivatives of calix[4]arene and chiral recognition properties

In the present study, the synthesis and liquid phase extraction properties towards some amino acid methylesters and amino alcohols of Schiff base and amino alcohol substituted calix[4]arene are reported. The Schiff base substituted calix[4]arene 5 has been synthesized via condensation reaction involving 5,17-diformyl-11,23-di-tert-butyl-25,27-di[3-(4-formylphenoxy)propoxy]-26,28 dihydroxycalix[4]arene 4 and (R)-(?)-2-phenylglycine methyl ester in CHCl₃:MeOH. To give the amino alcohol substituted calix[4]arene 6, the synthesized chiral compound 5 was reduced by LiAlH₄. The new chiral Schiff base and amino alcohol derivatives of calix[4]arene have been characterized by a combination of FT-IR, ¹H NMR, ¹³C NMR, FAB-MS and elemental analysis. Also, the extraction behaviors of 5 and 6 towards some selected amino acid methylesters and amino alcohols have been studied by liquid–liquid extraction.     

Calixarene Complexes of Anion-bridged Oligouranyl Species

The syntheses and structures of uranyl complexes of p-t-Bu-calix[6]arene (calix[6]H₆) and p-t-Bu-calix[9]arene (calix[9]H₉) are reported, further developing the role of calixarenes as 'cluster keepers'. The calix[6]arene complex, formulated as [(HO){UO₂(calix[6]H₄)(dmso)}₃H], is trinuclear and linked symmetrically by the hydroxyl O atom. The calix[9]arene complex is binuclear, with a carbonate atom bridging between the two uranyl cations to give the complex, (HNEt₃)₃[(OCO₂)(UO₂)₃(calix[9]H₄)].     

An efficient route to disymmetrically substituted calix[6]arenes. Synthesis of novel ligands presenting a N2S or N3CO2 binding core

The C_3v tris-methoxy calix[6]arene was selectively mono-alkylated by dibromoethane yielding a key intermediate for the design of disymmetrically O-substituted calix[6]arenes. Indeed, subsequent reactions with various functional groups afforded novel calix[6]arene-based biomimetic ligands that present a mixed donor N₂S or N₃CO₂⁻ environment in an efficient way.     

Synthesis of conformationally diverse tetrathiacalix[4]arene(amido)crowns and tetrathiacalix[4]arene amides with pendant amine functions

A series of conformationally diverse novel tetrathiacalix[4]arene(amido)crowns and amides from tetrakis((ethoxycarbonyl)methoxy)p-tert-butyl tetrathiacalix[4]arene and its debutylated analog have been prepared by their reaction with diamines [H₂N(CH₂)_nNH₂; n=2,3,4, and 6] and polyamines. It has been determined that the length of the alkyl spacer in diamines is pivotal for the formation of either the tetrathiacalix[4]arene bis(amido)crowns or tetrathiacalix[4]arene amides with pendant amine functions. The synthesized compounds represent potential building blocks for achieving sophisticated molecular assemblies for molecular organization and recognition. Single crystal X-ray analysis of tetrathiacalix[4]arene bis(amido)crown 6a revealed that it has a 1,3-alternate conformation, which forms supramolecular complexes with chloroform.     

含酰胺和席夫碱单元的杯[4]芳烃衍生物的合成与配合性能

杯[4]-1,3-二乙酸乙酯衍生物1与水合肼反应生成杯[4]芳烃酰肼衍生物2, 然后进一步与相应的芳醛反应, 高产率地合成了三个新型的含酰胺和席夫碱单元的杯[4]芳烃衍生物3a～3c和一例新型杯[4]冠醚4. 阳离子萃取实验表明新型杯芳烃衍生物比只含有酰胺基或席夫碱基的杯芳烃衍生物有更强的软金属离子配合性能, 杯[4]冠醚4还对Ag^＋有较好的选择性萃取能力.     

Synthesis, NMR, X-ray structural analyses and complexation studies of new Ag selective calix[4]arene based dipodal hosts—a co-complexation of neutral and charged species

New podands based on the p-tert-butylcalix[4]arene unit with substitution at the lower rim incorporating imine units, have been synthesized in high yield by simple condensation method. These podands have been shown to extract and transport Ag⁺ selectively over alkali, alkaline earth metal cations, Zn²⁺, Pb²⁺ and Hg²⁺ ions, from neutral aqueous phase to organic phase. In all the ligands the calix unit has been found to be present in a cone conformation except for the one having pyridine as end group, at the ortho position. It has been isolated in two conformations; cone and 1,2-alternate. To the best of our knowledge, this may be the first 1,3-lower rim substituted calix[4]arene to exist in a 1,2-alternate conformation and is among a few known compounds with this conformation in the general class of calix[4]arenes. A complex of this ligand, which happens to be the highest extractant of Ag⁺ has been isolated and characterized using mass, ¹H and ¹³C NMR spectroscopy's and elemental analysis. The spectroscopic evidence and molecular modelling studies performed on the complex suggest a participation of the imine and pyridine nitrogens and two of the ether oxygens in coordination to the metal ion. The X-ray crystal structures of three of the ligands establish the formation of inclusion complexes with polar acetonitrile solvent molecules. The ¹H and ¹³C NMR spectra of all the compounds, taken in CDCl₃, show the presence of acetonitrile molecules in the cavity of the calix[4]arene, indicating inclusion of the neutral guest molecules in the solution phase as well. For one of the podands X-ray crystal structure has shown a formation of clatharate complex of chloroform with the ligand which has rarely been found in the case of calix[4]arenes.     

Thermodynamics,a suitable reporter in the design of mercury (II) ion selective electrodes

A fully functionalised calix[4]pyrrole derivative, namely, meso-tetramethyl-tetrakis[(diethylthiocarbamoyl)phenoxy] calix[4]-pyrrole, 1 has been synthesised and structurally characterised. Its complexing properties with metal cations in acetonitrile were investigated with particular emphasis on the thermodynamics of these systems. These data and those previously reported for a partially functionalised calix[4]arene based receptor, 5,11,17,23-tetra-tert-butyl[25,27 bis(diethylthiocarbamoyl)oxy]calix[4]arene, 2 were used to, i) further corroborate their use to predict the selectivity coefficients of carrier mediated mercury (II) ion selective electrodes (ISEs) and ii) to obtain approximate stability constant data from selectivity coefficients. The optimum working conditions of both electrodes were determined. It is shown that while the ISE based on 1 is characterised by a wider linear range and a lower mercury (II) detection than the one based on 2, the latter has the advantage of lower interference of other metal cations due to the much lower stability constants of bivalent cations relative to Hg(II). The response characteristics of these electrodes are compared with those found in the literature. SEM micrographs along with EDX spectra of the PVC membranes containing ionophore 1 or 2 unloaded and loaded with Hg(II) are reported.     

Aminolysis reaction of calix [ 4 ] arene esters and crystal structures and conformational behaviors of calix[4]arene amides

We first make use of aminolysis of calix[4]arene esters to synthesize calix[4]arene amides. When the two ethyl esters of the calix[4]arene esters are aminolysized, the 1, 3-amide derivative is formed selectively. The crystal structures of the calix-[4]arene with two butyl amide (3b) and four butyl amide moieties (4b) were determined. The intermolecular hydrogen bonds make 4b form two-dimensional net work insolid state. The 1H NMR spectra prove that 3b is of a pinched cone conformation, while 4b and tetraheptylamide-calix[4]arene (6b) take fast interconversion between two C2v isomers in solution and appear an apparent cone conformation at room temperature. As decreasing temperature, the interconversion rate decreases gradually and, finally, the interconversion process is frozen at Tc = -10℃, which makes both conformations of 4b and 6b the pinched cone structures. The hydrogen bond improves the interconversion barrier, and the large different values of the potential barrier between 6b and 4b (or 6b) may