A mild and efficient selective tetrahydropyranylation of primary alcohols and deprotection of THP ethers of phenols and alcohols using PdCl2(CH3CN)2 as catalyst

Primary alcohols were selectively tetrahydropyranylated in good to excellent yields at room temperature using PdCl₂(CH₃CN)₂ as catalyst in tetrahydrofuran (THF) in the presence of phenols, secondary, and tertiary alcohols. The tetrahydropyranyl (THP) group could be efficiently removed using PdCl₂(CH₃CN)₂ as catalyst in CH₃CN, while other protection groups such as p-toluenesulfonyl (Ts), tert-butyldiphenylsilyl (TBDPS), benzyloxycarbonyl (Cbz), allyl, benzyl (Bn), and benzoyl (Bz) remained intact under these conditions.     

Efficient tetrahydropyranyl and tetrahydrofuranyl protection/deprotection of alcohols and phenols with Al(OTf)3 as catalyst

A simple and efficient method for the conversion of alcohols and phenols into their corresponding THP and THF ethers at room temperature has been developed using 1 mol % aluminium triflate as catalyst. The deprotection reaction in the presence of methanol using Al(OTf)₃ was equally successful and could be performed at ambient temperature in high yields.     

The thermal dissociation of the [Co(NH3)6]Cl3 and [Co(NH3)6]Br3 complexes in vacuo

The thermal dissociation of the complexes, [Co(NH₃)₆]X₃(X^?=Cl, Br), was studied in vacuo using the techniques of thermogravimetry, evolved gas analysis and mass spectrometric analysis. It was found that the reaction stoichiometry was identical to that previously determined in air but that the type of intermediate compounds formed were different. The dissociation occurred by the reactions:

     

Direct reduction of some benzoic acids to alcohols via NaBH4-Br2

Direct reduction of seven benzoic acids to alcohols via sodium borohydride-bromine (NaBH_4-Br_2)reagent was developed.The isolated yields for the seven acids to reduce reached 60.6-90.1%.This new synthesis route has the advantages of simple of application,low cost,mild nature,and satisfactory yields.     

Chemoselective deprotection of acid labile primary hydroxyl protecting groups under CBr4-photoirradiation conditions

The CBr₄-photoirradiation in methanol generates a controlled source of HBr, which can chemoselectively deprotect commonly used hydroxyl-protecting groups in saccharides and nucleosides, such as tert-butyldimethylsilyl, isopropylidene, benzylidene and triphenyl ethers in the presence of other acid-labile functional groups.     

Synthesis and crystal structure of the double barium-titanium methoxide [Ba2Ti4O(OMe)18(MeOH)7]·MeOH

The X-ray diffraction study of crystals isolated from solutions obtained by reaction of Ba(OMe)₂ with Ti(OMe)₄ (molar ratio 1:2) in methyl alcohol was carried out; the crystals of the methanol solvate of the double barium-titanium methoxide, [Ba₂Ti₄O(OMe)₁₈(MeOH)₇]·MeOH (1), contain two Ba²⁺ cations with different environments and two kinds of anionic binuclear titanium complexes with and without oxo-ligand, and thus can be formulated as [Ba(MeOH)₂]²⁺[Ba(MeOH)₅]²⁺[Ti₂O(OMe)₈]²⁻[Ti₂(OMe)₁₀]²⁻·MeOH.     

A new application of cerium(IV) ammonium nitrate [(NH4)2Ce(NO3)3] in fullerene chemistry—free-radical alkoxylation of C60 fullerene on reaction with primary alcohols

The reaction of [60]fullerene with primary aliphatic alcohols (ROH, R = Et, Me, Pr) mediated by cerium(IV) ammonium nitrate [(NH₄)₂Ce(NO₃)₃] affords the corresponding alkoxy-derivatives with a hydroxy group, C₆₀(OR)_x(OH) (x = 3, 4) in high yield. The reaction is characterized by a free radical mechanism confirmed by an EPR study of the alkoxy fullerenyl radical (g = 2.0023).     

Microwave-assisted N-Boc deprotection under mild basic conditions using K3PO4·H2O in MeOH

A simple and efficient method for the deprotection of secondary Boc-protected amino compounds under mild basic conditions using K₃PO₄·H₂O in MeOH assisted by microwave irradiation has been presented.     

Mixed-metal cluster chemistry VI: Phosphine substitution at CpMoIr3(μ-CO)3(CO)8; X-ray crystal structure of CpMoIr3(μ-CO)3(CO)7(PPh3)

Reactions of CpMoIr₃(μ-CO)₃(CO)₈ (1) with stoichiometric amounts of phosphines afford the substitution products CpMoIr₃(μ-CO)₃(CO)_8−x (L)_x (L = PPh₃, x = 1 (2), 2 (3); L = PMe₃, x = 1 (4), 2 (5), 3 (6)) in fair to good yields (23–54%); the yields of both 3 and 6 are increased on reacting 1 with excess phosphine. Products 2–5 are fluxional in solution, with the interconverting isomers resolvable at low temperatures. A structural study of one isomer of 2 reveals that the three edges of an MoIr₂ face of the tetrahedral core are spanned by bridging carbonyls, and that the iridium-bound triphenyiphosphine ligates radially and the molybdenum-bound cyclopentadienyl coordinates axially with respect to this Molr₂ face. Information from this crystal structure, ³¹P NMR data (both solution and solid-state), and results with analogous tungsten—triiridium and tetrairidium clusters have been employed to suggest coordination geometries for the isomeric derivatives.     

2-Pivalamido-3H-pyrimidin-4-one derivatives: convenient pivalamide hydrolysis using Fe(NO3)3 in MeOH

A simple methodology for pivalamide (trimethylacetamide, pivaloylamino) hydrolysis has been discovered using Fe(NO₃)₃ in MeOH at room temperature. The pivalamido group of 2-pivalamido-3H-pyrimidin-4-ones or fused 2-pivalamido-3H-pyrimidin-4-ones such as 2-pivalamido-3H-quinazolin-4-ones and 2-pivalamido-3H-pteridines have been hydrolysed under these conditions to afford the corresponding amine.     

Synthesis, characterisation and reactivity of trans-[Ru(L)(PPh3)Br2]; L=2-pyridyl-N-(2′-methylthiophenyl)methyleneimine: Crystal structure of trans-[Ru(L)(PPh3)Br2]

Reaction of Ru(PPh₃)₂Br₂ with the NNS chelating tridentate ligand 2-pyridyl-N-(2′-methylthiophenyl)methyleneimine (L) led to the isolation of the ruthenium(II) complex [Ru(L)(PPh₃)Br₂]. Reactivity of this complex with different bidentate chelating ligands revealed that the products are quite different from those obtained by reacting Ru(L)(PPh₃)Cl₂ (the corresponding cis dichloro complex) with the same ligands under comparable conditions. The mixed chelates were isolated and characterised by elemental analysis, magnetic moment measurement and by different spectroscopic methods along with their precursor. Electrochemistry of the complexes was examined by cyclic voltammetry using a platinum working electrode and a Ag/AgCl electrode as reference. The crystal structure of [Ru(L)(PPh₃)Br₂] disclosed that, unlike Ru(L)(PPh₃)Cl₂, the two bromo ligands are in trans position and this explained the difference in its reactivity pattern from the corresponding chloro complex.     

The reaction of (μ-H)2Os3(CO)9(PPh3) with ethylene affords the ethylidene complex (μ-H)2Os3(CO)9(PPh3)(μ-CHCH3)

The product isolated from the reaction of (μ-H)₂Os₃(CO)₉(PPh₃) with ethylene is shown to be the ethylidene complex (μ-H)₂Os₃(CO)₉(PPh₃)(μ-CHCH₃) (1) rather than the ethylene complex (μ-H)(H)Os₃(CO)₉(PPh₃)(C₂H₄), as previously claimed. The characterization of 1 is based on a combination of ¹H and ¹³C NMR results. The ¹H NMR data (δ 6.84 (1 H_D), 2.53 (3 H_C), J(CD) = 7.4 Hz) establish the presence of the ethylidene moiety, whereas detailed analysis of the 1-D and 2-D ¹³C NMR spectra of ¹³CO-enriched 1 indicates the relative positions of the ethylidene, hydride, and phosphine ligands on the triosmium framework.     

Structure of two new borates YCa3(AlO)3(BO3)4 and YCa3(GaO)3(BO3)4

By replacing Mn in YCa₃(MnO)₃(BO₃)₄ with trivalent Al and Ga, two new borates with the compositions of YCa₃(MO)₃(BO₃)₄ (M=Al, Ga) were prepared by solid-state reaction. Structure refinements from X-ray powder diffraction data revealed that both of them are isostructural to gaudefroyite with a hexagonal space group P6₃/m. Cell parameters of a=10.38775(13)Å, c=5.69198(10)Å for the Al-containing compound and a=10.5167(3)Å, c=5.8146(2)Å for the Ga analog were obtained from the refinements. The structure is constituted of AlO₆ or GaO₆ octahedral chains interconnected by BO₃ groups in the ab plane to form a Kagomé-type lattice, leaving trigonal and apatite-like tunnels. It is found that most rare-earth and Cr, Mn ions can be substituted into the Y³⁺ and M³⁺ sites, respectively, and the preference of rare-earth ions to locate in the trigonal tunnel is correlated to the sizes of the M³⁺ ions.     

Syntheses and structures of three new scandium selenites: Sc2(SeO3)3·H2O, Sc2 (SeO3)3·3H2O and CsSc3(SeO3)4 (HSeO3)2·2H2O

Three new hydrated scandium selenites have been hydrothermally synthesized as single crystals and structurally and physically characterized. Sc₂(SeO₃)₃·H₂O crystallizes as a new structure type containing novel ScO₇ pentagonal bipyramidal and ScO₆₊₁ capped octahedral coordination polyhedra. Sc₂(SeO₃)₃·3H₂O contains typical ScO₆ octahedra and is isostructural with its M₂(SeO₃)₃·3H₂O (M=Al, Cr, Fe, Ga) congeners. CsSc₃(SeO₃)₄(HSeO₃)₂·2H₂O contains near-regular ScO₆ octahedra and has essentially the same structure as its indium-containing analogue. All three phases contain the expected pyramidal [SeO₃]^2- selenite groups. Crystal data: Sc₂(SeO₃)₃·3H₂O, M_r=524.85, trigonal, R3c (No. 161), , , , Z=6, R(F)=0.018, wR(F²)=0.036; Sc₂(SeO₃)₃·H₂O, M_r=488.82, orthorhombic, P2₁2₁2₁ (No. 19), , , , , Z=4, R(F)=0.051, wR(F²)=0.086; CsSc₃(SeO₃)₄(HSeO₃)₂·2H₂O, M_r=1067.60, orthorhombic, Pnma (No. 62), , , , , Z=4, R(F)=0.035, wR(F²)=0.070.     

Highly chemoselective nitration of aromatic amines using the Ph3P/Br2/AgNO3 system

The use of PPh₃/Br₂/AgNO₃ provides a new reagent system for the novel and highly chemoselective nitration of aromatic amines under mild reaction conditions.     

Synthesis and structural characterization of (μ-H)2RU3(CO)9(μ3-η-C8H12) and (μ-H)RU3(CO)9(μ3-η-C12H19)

The reaction between Ru₃(CO)₁₂ and a cyclic olefin (cis-cyclooctene or trans-cyclododecene) at 100 °C for several hours gives the title compounds (μ-H)₂RU₃(CO)₉(μ₃-η²-C₈H₁₂) (1), and (μ-H)RU₃(CO)₉(μ₃-η³-C₁₂H₁₉) (2), both of which have been characterized by X-ray diffraction studies, IR and NMR spectral measurements and elemental analysis. The prolonged reaction between Ru₃(CO)₁₂ and cis-cyclooctene gives compound HRu₃(CO)₉(C₈H₁₁) (3). Compound 3 has been characterized with IR and NMR spectral analyses. In 1 the cyclooctene ring is linked via a μ₃-η²-alkyne type of bonding to the face of the Ru₃ cluster. It is formally σ-bonded to two of the three Ru atoms and π-bonded to the third Ru. The two hydrides in 1 are bridging Ru---Ru bonds. In 2 the cyclododecene ring is bonded to the Ru₃ face via the μ₃-η³-CCHC linkage. There are two formal σ-bonds from the allyl part to the hydrido-bridged Ru atoms and the η³-allyl linkage to the third Ru atom.     

New deprotection method of the 2,2,2-trichloroethoxycarbonyl (Troc) group with (Bu3Sn)2

The 2,2,2-trichloroethoxycarbonyl (Troc) group was efficiently removed in high yields with (Bu₃Sn)₂ in DMF under microwave heating. The present method was applied to deprotection of the Troc group on solid support.     

Synthesis and structures of triphenylbismuth diaroxides Ph3Bi(OAr)2, Ar = C6H3(Br2-2,4), C6H2(Br2-2,6)(NO2-4), and C6H2[(NO2)3-2,4,6]

Triphenylbismuth diaroxides Ph₃Bi(OAr)₂ (Ar = C₆H₃(Br₂-2,4) (I), C₆H₂(Br₂-2,6)(NO₂-4) (II), and C₆H₂[(NO₂)₃-2,4,6] (III) are synthesized in yields up to 74% by the reaction of triphenylbismuth with phenols in the presence of hydrogen peroxide (taken at a molar ratio 1: 2: 1, respectively) in ether. According to X-ray diffraction data, the bismuth atoms in compounds I-III have distorted trigonal-bipyramidal coordination with the aroxyl substituents in the axial positions; the Bi-C, Bi-O bond lengths and the OBiO, CBiC angles vary in the intervals 2.162–2.204, 2.150–2.299 ? and 172.4°–176.1°, 109.6°–139.9°, respectively. Compound II exhibits intramolecular contacts between the central atom and ortho-Br atoms (3.924, 4.101 ?), and compound III has similar contacts of the Bi atom with the O atoms of the ortho-nitro groups (3.114, 3.313 ?). Original Russian Text ? V.V. Sharutin, I.V. Egorova, O.K. Sharutina, A.P. Pakusina, M.A. Pushilin, 2007, published in Koordinatsionnaya Khimiya, 2007, Vol. 33, No. 1, pp. 14–21.     

Synthesis and characterisation of HRuRh3(CO)12. Crystal structures of HRuRh3(CO)12, HRuRh3(CO)10(PPh3)2 and HRuCo3(CO)10(PPh3)2

A new ruthenium-rhodium mixed-metal cluster HRuRh₃(CO)₁₂ and its derivatives HRuRh₃(CO)₁₀(PPh₃)₂ and HRuCo₃(CO)₁₀(PPh₃)₂ have been synthesized and characterized. The following crystal and molecular structures are reported: HRuRh₃(CO)₁₂: monoclinic, space group P2₁/c, a 9.230(4), b 11.790(5), c 17.124(9) Å, β 91.29(4)°, Z = 4; HRuRh₃(CO)₁₀(PPh₃)₂·C₆H₁₄: triclinic, space group P$\text{1}$, a 11.777(2), b 14.079(2), c 17.010(2) Å, α 86.99(1), β 76.91(1), γ 72.49(1)°, Z = 2; HRuCo₃(CO)₁₀(PPh₃)₂·CH₂Cl₂: triclinic, space group P$\text{1}$, a 11.577(7), b 13.729(7), c 16.777(10) Å, α 81.39(4), β 77.84(5), γ 65.56°, Z = 2. The reaction between Rh(CO)₄^? and (Ru(CO)₃Cl₂)₂ tetrahydrofuran followed by acid treatment yields HRuRh₃(CO)₁₂ in high yield. Its structural analysis was complicated by a 80–20% packing disorder. More detailed structural data were obtained from the fully ordered structure of HRuRh₃(CO)₁₀(PPh₃)₂, which is closely related to HRuCo₃(CO)₁₀(PPh₃)₂ and HFeCo₃(CO)₁₀(PPh₃)₂. The phosphines are axially coordinated.