A convenient synthesis of substituted 2,2′:6′,2″-terpyridines

The 2,2′:6′,2″-terpyridines 7a-c were prepared in good yield by reacting α-acetoxy-α-chloro-β-keto-esters 3a-c with bis-amidrazone 4 and 2,5-norbornadiene 6 in ethanol at reflux. Compounds 3a and 3b gave the 2,2′:6′,2″-terpyridines 9a and 9b, respectively, in moderate yield when treated with compound 4 and enamine 8.     

A convenient synthesis of 2,2′-bipyridine derivatives

Picolinates 7 were prepared from the corresponding α-chloro-β-keto-esters 6. Esters 7 were converted into 2,2′-bipyridine derivatives 10 via triazines 9 using an aza Diels-Alder reaction.     

A convenient synthesis of pyridine and 2,2′-bipyridine derivatives

α-Chloro-α-acetoxy-β-keto-esters 9 were readily prepared from β-keto-esters 6 in good overall yields. These compounds reacted as α,β-diketo-ester equivalents 2 with amidrazones 1 yielding triazines 3, generally in good yields. Picolinates 10 provided an alternative source of α,β-diketo-ester equivalents 2 when treated with copper(II) acetate. A ‘one-pot’ reaction of the α,β-diketo-ester equivalents 2 with amidrazones 1 in the presence of 2,5-norbornadiene 5 in boiling ethanol yielded the pyridines 4 and 2,2′-bipyridines 4 (R¹=2-pyridyl) directly without the need to isolate the corresponding triazines 3. Triazine 3c reacted with the aza-dienophiles 13 and 17 affording the products 16 and 18, respectively, in good yields.     

Synthesis of pyridine and 2,2′-bipyridine derivatives from the aza Diels-Alder reaction of substituted 1,2,4-triazines

Amidrazone 1a and the tricarbonyl derivatives 2b-d reacted in boiling ethanol in the presence of 2,5-norbornadiene 5 giving the pyridine derivatives 6b-d respectively (59-72%) and in the presence of 2,3-dihydrofuran 7 yielding the lactones 10b-d (39-44%). The 2,2′-bipyridine derivatives 6e-g were similarly obtained in good yield (81-87%) from the reaction of amidrazone 1b and tricarbonyl derivatives 2b-d in the presence of 2,5-norbornadiene 5.     

Photoactive building blocks for coordination complexes: Gilding 2,2′:6′,2″-terpyridine

The alkyne unit of 4′-ethynyl-2,2′:6′,2″-terpyridine has been functionalized with Ph₃PAu, (2-tolyl)₃PAu or Au(dppe)Au units to produce compounds 1-3, respectively. These derivatives have been characterized by electrospray mass spectrometry, solution ¹H and ¹³C NMR, UV-Vis and emission spectroscopies, and single crystal X-ray diffraction. In the solid state, molecules of 1 or 2 pack with separated domains of tpy and R₃PAu units; the tpy units in 2 (but not 1) exhibit face-to-face π-stacking. Compound 3 crystallizes as 2(3)^.CHCl₃, and the folded conformation of the dppe backbone results in a short (2.9470(8) Å) aurophilic interaction. Folded molecule 3 captures CHCl₃, preventing intramolecular face-to-face π-interactions between the tpy units. In CH₂Cl₂ solution, 1-3 are emissive when excited between 230 and 300 nm, but over minutes when λ_ex = 230 nm, the emission bands decay as the compounds photodegrade.     

A pyrazolyl-terminated 2,2′:6′,2″-terpyridine ligand: Iron(II), ruthenium(II) and palladium(II) complexes of 4′-(3,5-dimethylpyrazol-1-yl)-2,2′:6′,2″-terpyridine

The preparation of 4′-(3,5-dimethylpyrazol-1-yl)-2,2′:6′,2″-terpyridine (2) under acidic conditions results in the formation of the salts [H₂2][MeOSO₃]₂ and [H₂2][EtOSO₃]₂, treatment of which with base leads to neutral 2. The structure of [H₂2][EtOSO₃]₂ · H₂O has been established by single crystal X-ray diffraction. The complexes [Fe(2)₂][PF₆]₂ and [Ru(2)₂][PF₆]₂ have been prepared and characterized, and the single crystal structure determination of [Ru(2)₂][PF₆]₂ is reported; [Fe(2)₂][PF₆]₂ is isostructural with [Ru(2)₂][PF₆]₂. Treatment of [Fe(2)₂]²⁺ with PdCl₂ produces [Pd(2)Cl]⁺, isolated and structurally characterized as the hexafluoridophosphate salt, illustrating that metal exchange within the tpy-binding domain occurs in preference to palladium(II) coordination by the N-donor atom of the pendant 3,5-dimethylpyrazol-1-yl unit in 2. [Pd(2)Cl]²⁺ can also be prepared from PdCl₂ and [H₂2][MeOSO₃]₂ in refluxing methanol.     

A highly selective colorimetric probe based on 2,2′,2″-trisindolylmethene for cysteine/homocysteine

The interaction and colorimetric sensing properties of receptor 1, tris(3-methylindole-2-yl)methene as the perchlorate salt, with amino acids in aqueous MeCN at neutral pH were investigated using UV-vis spectroscopic techniques. Specifically, receptor 1 behaves as a colorimetric probe for selective and sensitive detection of cysteine (Cys)/homocysteine (Hcy) based on the nucleophilic addition reaction between the sulphydryl group of Cys/Hcy and the meso carbon-carbon double bond of receptor 1, leading to clear color change from violet to colorless. A more quantitative determination for Cys/Hcy was preliminary performed by flow injection analysis (FIA) coupled with spectrophotometry. The selective binding ability of receptor 1 toward Cys/Hcy has also been evaluated by electrochemical techniques.     

2,2′:6′,2″-Terpyridine[hydroxypropyl-β-cyclodextrin] 1:3 complex used as chelating agent for the determination of iron with a sensitive, selective and fast liquid chromatographic method

In the present work, 2,2′:6′,2″-Terpyridine (terpy), a substance with very poor aqueous solubility, was dissolved in water, after formation of its inclusion complex with hydroxypropyl-β-cyclodextrin (HPβCD), in a 1:3 stoichiometry. The obtained [terpy:(HPβCD)₃] supramolecule, with enhanced aqueous solubility, enables its usage as a reagent at RP-LC methods. It was found that, terpy after inclusion complexation retains unaffected the ability of binding to Fe²⁺. It was also observed that, the stable, reddish-purple [Fe(terpy)]²⁺ complex was formed quantitatively in a wide pH range (2-9). Subsequently, iron as active substance or impurity in a drug product, can be determined through UV-vis measurements of [Fe(terpy)₂]²⁺. Speed, sensitivity and selectivity are the most important features of the isocratic RP-LC method, developed to determine iron in pharmaceutical formulations. The duration of the chromatographic separation was less than 4.0 min. The method was linear, precise and accurate from 0.17 to 2.2 mg l⁻¹ of iron and the detection limit was found to be 5 μg l⁻¹. The absorbance at 318 and 552 nm allowed the quantitation of Fe (II) and Fe (III) after reduction, as well as of total Fe (II + III). Moreover, there were no interferences from Fe³⁺, Ni²⁺, Co²⁺ or Cu²⁺.     

Synthesis of 2,2′-bipyridyl derivatives using aza Diels-Alder methodology

Amidrazone 1 and the tricarbonyl derivatives 2a-c gave the triazines 3a-c, respectively, which reacted with 2,5-norbornadiene 4 in boiling ethanol yielding the corresponding novel 2,2′-bipyridines 5a-c in good yield. Triazine 6 gave the 2,2′-bipyridyl derivative 7 (65%) with compound 4 in 1,2-dichlorobenzene at 140°C.     

Synthesis of 4′-substituted 2,2′:6′,2″-terpyridines via a Mitsunobu reaction

Treatment of 2,6-di(pyridin-2-yl)pyridin-4(1H)-one with various appropriately protected ω-substituted primary alcohols or a nucleoside (3,3′-O-diBz-dUrd) in dry THF in the presence of triphenylphosphine and diisopropylazodicarboxylate gives the corresponding 4′-substituted terpyridines in high yield.     

Synthesis of new fluorescent 2-(2′,2″-bithienyl)-1,3-benzothiazoles

Bithienyl-1,3-benzothiazole derivatives were synthesised by reacting various 5-formyl-5′-alkoxy- or 5-formyl-5′-N,N-dialkylamino-2,2′-bithiophenes with ortho-aminobenzenethiol in good to excellent yields. Evaluation of the fluorescence properties of these compounds was carried out. They show strong fluorescence in the 450-600 nm region, as well as high quantum yields and large Stokes’ shifts.     

The first approach to optically active 2,2′-bipyridine alkyl sulfoxides

The synthesis of 6,6′-bis(alkylsulfanyl)-2,2′-bipyridines and their asymmetric oxidation to non-racemic 2,2′-bipyridine alkyl sulfoxides using either (+)-(8,8-dichlorocamphorylsulfonyl)oxaziridine or a modified Sharpless reagent is reported.     

Synthesis of phosphocyclic 2,2′,7,7′-tetrahydroxydinaphthylmethane derivatives

Two types of phosphocyclic derivatives were synthesized by phosphorylation of 2,2′,7,7′-tetrahydroxydinaphthylmethane with triamidophosphites: triphosphorus containing compounds with a phosphocine ring and two acyclic diamidophosphite fragments, and tetraphosphorus-containing macrocycles with a 24-membered ring and two eight-membered phosphorus rings. It was shown that interaction of triphosphorus compounds with resorcinarene gives tetraphosphorus macrocycles.     

A convenient, large-scale synthesis of 4′-carboxamido N-Boc-2′,6′-dimethyl-l-phenylalanines

A large-scale synthesis of a series of 4′-carboxamido N-Boc-2′,6′-dimethyl-l-phenylalanines is described. This method features mild reaction conditions and high chemical yields from commercially available N-Boc-2′,6′-dimethyl-l-tyrosine methyl ester.     

Cycloalkano[1″,2″:4,5;4″,3″:4′,5′]bis(pyrrolo[2,3-c]pyrimido[5,4-e]pyridazines): synthesis, structure and mechanism of their formation

Reactions of 3-alkylamino-6,8-dimethylpyrimido[4,5-c]pyridazine-5,7(6H,8H)-diones with cyclohexyl- and cycloheptylamines in the presence of AgPy₂MnO₄ produce novel cycloalkano[1″,2″:4,5;4″,3″:4′,5′]bis(pyrrolo[2,3-c]pyrimido[5,4-e]pyridazines). Detailed information concerning the scope and mechanism of these transformations is discussed.     

Facile acid-catalyzed condensation of 2-hydroxy-2,2′-biindan-1,1′,3,3′-tetrone with phenols, methoxyaromatic systems and enols

Various phenols, methoxy aromatic compounds, 3- and 4-hydroxycoumarins and enols smoothly condense with 2-hydroxy-2,2′-biindan-1,1′,3,3′-tetrone 1 in an acid medium producing 2-aryl/alkyl-2,2′-biindan-1,1′,3,3′-tetrones in high yields. The adducts of resorcinol, 1,3,5-trihydroxybenzene and α- and β-naphthols of 1 preferably remain in the intramolecular hemi-ketal form, confirmed by X-ray diffraction studies. On the other hand para and meta substituted phenols condense with 1 in an acid medium to produce 6 or 7 substituted 2′,4-spiro(1′,3′-indanedion)-indeno[3,2-b]chromenes in good yields.     

Application of intramolecular cycloaddition/retro cycloaddition reactions for the synthesis of unsymmetrical 2,2′-bipyridine and 2-benzofuropyrazin-2-ylpyridine analogues

1,2,4-Triazines bearing cycloalkeno[c]pyridine substituents at the 5-position, 2a-d, prepared by an intermolecular Diels-Alder reaction of bi-5,5-triazines with cyclic enamines, were provided with an alkynyloxy or a 2-cyanophenoxy group at the 3-position of the triazinyl unit. A subsequent intramolecular Diels-Alder reaction of the former, followed by loss of N₂ leads to two new classes of 2,2′-bipyridine analogues containing different heterocyclic units, namely cycloalkeno[c]pyridine and 2,3-dihydrofuro- or 2,3-dihydropyrano[2,3-b]pyridine 8a-h; the intramolecular reaction of the 2-cyanophenoxy compound gives benzo[4,5]furo[2,3-b]pyrazine 10a-c.     

Kröhnke reaction in aqueous media: one-pot clean synthesis of 4′-aryl-2,2′:6′,2″-terpyridines

A clean aqueous Kröhnke reaction process has been accomplished via a one-pot procedure of 2-acetylpyridine with aromatic aldehyde and ammonium acetate under microwave irradiation or conventional heating conditions. This method is convenient, economic and environmental friendly.     

The preparation of 1,2,4-triazines from α,β-diketo-ester equivalents and their application in pyridine synthesis

The α-Chloro-α-acetoxy-β-keto-esters were prepared from β-keto-esters in good overall yields. These compounds reacted as α,β-diketo-ester equivalents with amidrazones yielding triazines, generally in good yields, or with an amidrazone and 2,5-norbornadiene in a one-pot aza Diels-Alder reaction to give the corresponding pyridines.