Bildung und Eigenschaften von Acylphosphanen. V [1]. Tert. Butyl- und Phenylpivaloylphosphane

Synthese and Properties of Acylphosphanes. V. Tert. Butyl- and Phenylpivaloylphosphanes Synthese and properties of P-alkyl/arylmono and dipivaloylphosphanes are described using the tert. butyl and phenyl compounds as examples. Monopivaloylphoshanes are formed in the reaction of P-alkyl/arylpivaloyltrimethylsilylphosphanes (enol forms) with methanole and of P-alkyl/aryltrimethylsilylphosphanes or P-alkyl/arylmonolithiumphosphides with pivaloyl chloride; side reactions give 1,2-di(alkyl, aryl)-1,2-dipivaloyldiphosphanes. Tert. butylpivaloylphosphane is a rather stable compound; under the influence of light phenylpivaloylphosphane decomposes to pentaphenylcyclopentaphosphane, 2,2-dimethylpropionaldehyde, carbon monoxide and isobutane. With methyllithium P-alkyl/aryllithiumpivaloylphosphides are obtained, and subsequent reactions with pivaloylchloride yield P-alkyl/aryldipivaloylphosphanes. These compounds are also synthesized from P-alkyl/arylpivaloyltrimethylsilylphosphanes (enol forms) or P-alkyl/aryldilithiumphosphides and pivaloyl chloride.     

Etude de l'acylation de l'acétyl-3 acétoxy-8 indolizine par action de chlorures d'acide en présence de chlorure d'aluminium

Study of acylation of 3-acetyl-8-acetoxyindolizine by miscellaneous acid chlorides in the presence of aluminium chloride shows that this reaction is either limited to a transesterification (in the case of benzoyl chloride) or leads to introduction of an acyl group in position 1 with simultaneous liberation of the phenol function in position 8. When acylation takes place, acetyl chloride resulting from the cleavage of the acetoxy group competes with the acid chloride used in the reaction. Predominant acylation by the latter is observed when the reaction is performed with ethoxalyl chloride or with non branched aliphatic acid chlorides; by contrast solely acetylation takes place when pivaloyl or phenylacetyl chloride is used. These results are tentatively explained by a process related to the Fries rearrangement. The hypothesis of intramolecular transfer of an acyl group from the ester function in position 8 can be discarded by the observed results.     

Free radical and isomerisation processes during the electrochemical fluorination of n-butyryl chloride, i-butyryl chloride and pivaloyl chloride in anhydrous hydrogen fluoride

Electrochemical perfluorination (ECPF) of the title compounds containing primary, secondary and tertiary carbon atoms was carried out in anhydrous hydrofluoric acid (AHF). Detailed analysis of major and minor products suggest that carbon chain isomerisation involving cyclo-propane intermediate is more prevalent during ECPF of i-butyryl chloride when compared to n-butyryl chloride. Simple statistical probability involving free radical intermediates also support this observation. ECPF involving cyclo-propane intermediate is even more prevalent in pivaloyl chloride containing three methyl substituents. In this case, perfluorinated cyclo-propane intermediates were also observed in the product sample. Distribution of minor perfluorinated and partially fluorinated products also suggest the predominant role of normal free radical pathway involving single-electron transfer.     

Single isomer trisubstituted olefins bearing alkyl groups

E-β-Chloro-α-iodo-α,β-unsaturated esters were converted to single isomer trisubstituted olefins bearing alkyl substituents by using and alkyl-Suzuki cross coupling. The process was highly selective, and the products in all cases were isolated as single isomers. Mechanistic investigations indicated that this process transfers a hydrogen from water to the α-position of the substrate, and then an alkyl group is introduced to the β-position of the intermediate template while replacing a chloride.     

Oxonitriles: a grignard addition-acylation route to enamides

[reaction: see text] Sequential addition of three different Grignard reagents and pivaloyl chloride to 3-oxo-1-cyclohexene-1-carbonitrile installs four new bonds to generate a diverse array of cyclic enamides. Remarkably, formation of the C-magnesiated nitrile intermediate is followed by preferential acylation by pivaloyl chloride rather than consumption by an in situ Grignard reagent. Rapid N-acylation of the C-magnesiated nitrile generates an acyl ketenimine that reacts readily with Grignard reagents or a trialkylzincate, effectively assembling highly substituted, cyclic enamides.     

Formation of surface-bound acyl groups by reaction of acyl halides on ge(100)-2x1

We have investigated the reaction of a series of acyl halides, including acetyl chloride, acetyl bromide, acetyl-d3 chloride, benzoyl chloride, and pivaloyl chloride, on Ge(100)-2x1 with multiple internal reflection infrared (MIR-IR) spectroscopy, X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT). Infrared spectra following saturation exposures of acetyl chloride and acetyl bromide to Ge(100)-2x1 at 310 K are nearly identical, both exhibiting strong nu(C=O) stretching peaks near 1685 cm-1 and no vibrational modes in the nu(Ge-H) region. These data provide strong evidence for the presence of a surface-bound acetyl group on Ge(100)-2x1, which results from a C-X dissociation reaction (where X=Cl, Br). For acetyl chloride, DFT calculations predict that the barrier to C-Cl dissociation is only 1 kcal/mol above a chlorine-bound precursor state and is considerably smaller than barriers leading to the [2+2] C=O cycloaddition and alpha-CH dissociation products. In addition to the C-X dissociation product, both infrared and photoelectron results point to the presence of a second structure for acetyl halides where the oxygen of the surface-bound acetyl group donates charge to a nearby surface atom. This interaction is not observed for benzoyl chloride and pivaloyl chloride.     

A short route to l-iduronic acid building blocks for the syntheses of heparin-like disaccharides

The effective preparation of differentially protected l-iduronic acid derivatives, as building blocks for the synthesis of heparin-like oligosaccharides, is described in less than nine steps starting from readily available 1,2-O-isopropylidene-6,3-d-glucuronolactone. The pivaloyl group was used as a permanent protecting group of hydroxyl groups. Two heparin-like disaccharides with different sulfation pattern have been prepared by using these l-iduronic acid building blocks.     

Synthesis of glucosylphosphatidylglycerol via a phosphotriester intermediate.

Complete deblocking of a fully-protected intermediate, which was prepared by using inter alia a selective protection of 1- or 3-0-allyl-sn-glycerol with one pivaloyl group and effective phosphorylation and coupling procedures, afforded glucosylphosphatidylglycerol.     

New syntheses of aliphatic isocyanates via cyannogen chloride

Alkylation of cyanogen chloride with alkyl chloride and ferric chloride gives an alkyl isocyanide dichloride-FeCl₃ complex 2. Such novel complexes react either with water to give alkylamines, or with alcohol or alcoholate to give the corresponding N-substituted carbamate, or are converted to alkyl isocyanates with various reagents. Cyanogen chloride, isopropyl chloride and ferric chloride give complex 2a which, with zinc oxide, gives isopropylisocyanate. Salts of caiboxylic acids also furnished the isocyanate in good yield. The t-butylisocyanide dichloride-FeCI₃ complex 2b does not react with zinc oxide but was transformed into f-butylisocyanate with trifluoroacetic acid or dimethyl sulphoxide.     

One-pot oxidative Mannich-type reaction of lactams with alkyl malonates

One-pot substitution of a C-H bond at the position next to the nitrogen atom of lactams with alkyl malonates proceeded effectively by dehydrogenation of lactams with N-tert-butylbenzenesulfinimidoyl chloride, followed by Mannich-type addition of alkyl malonates.     

Unexpected dipivaloyl­ation of 9‐li­thia­ted fluorene: formation of 1‐(fluoren‐9‐yl­idene)‐2,2‐di­methyl­propyl pivalate

Treatment of 9‐li­thia­ted fluorene with pivaloyl chloride provided ap‐9‐pivaloyl­fluorene, (1), the major product, and a minor product ultimately identified as the title compound, C₂₃H₂₆O₂, (2). The latter was also formed directly, but slowly, from 9‐li­thia­ted‐(1) treated with pivaloyl chloride. Although (1) exists exclusively as its less sterically restricted ap rotamer, its sp²‐hybridized anion sterically impedes reaction at the 9‐position from either face. While 9‐li­thia­ted‐(1) is exclusively, but slowly, 9‐methyl­ated with methyl iodide, reaction with pivaloyl chloride, also slow, leads only to the O‐acyl­ated product, (2). The protons of the tert‐butyl‐C=C moiety approach a proton on the fluorene ring to well within the sum of their van der Waals radii, resulting in significant molecular compression, strain and distortion. For example, distortion in the moiety C=C(O)(C) is exhibited by the enlargement of C=C—C angle to 130.6 (2)° at the expense of the corresponding `equivalent' C=C—O angle, which is compressed to 116.46 (19)°.     

Reaction of 2-alkyl pyridine N-oxide derivatives with Mosher’s acyl chloride: first example of stereoselective Boekelheide rearrangement

Treatment of 2-alkyl pyridine N-oxides with acylating reagents represents an established procedure for the introduction of oxygen functionality into alkyl group at the ortho position of N heteroaromatic rings. We have reported the first example of asymmetric Boekelheide rearrangement applied to a set of 2-alkyl-pyridine N-oxide derivatives using (R) Mosher’s acyl chloride as activator of the rearrangement to give, after hydrolysis, enantiomerically enriched 1-(2-pyridinyl)alkyl alcohol. Diastereoselectivity of the process was studied at low temperatures in different solvents, and was supported by a preliminary in silico modeling.     

A synthesis of esters, amides, and sulfones bearing a 1-cyclopentenyl group at the α-position from cyclobutanones with one-carbon ring-expansion

Treatment of 1-chlorovinyl p-tolyl sulfoxides, derived from cyclobutanones and chloromethyl p-tolyl sulfoxide, with lithium enolate of carboxylic acid tert-butyl esters, lithium enolate of carboxylic acid N,N-dimethylamides, or lithium α-carbanion of alkyl phenyl sulfones gave adducts in high yields. The adducts were treated with isopropylmagnesium chloride or ethylmagnesium chloride in dry toluene to give esters, amides, and sulfones bearing a 1-cyclopentenyl group at the α-position in moderate to good yields with one-carbon ring-expansion via magnesium carbenoid 1,2-CC insertion reaction. The magnesium carbenoid 1,2-CC insertion reaction proved to be highly stereospecific. The reaction mechanism and origin of the specificity are described.     

Convenient preparation of dichloromethyl alkyl ethers

Dichloromethyl alkyl ethers have been synthesized from alkyl formates (C1–C4) and oxalyl chloride in the presence of catalytic amount of N-methylformanilide. N,N-Dimethylformamide is not suitable for the reaction. The method has the advantages of simple experimental procedure, which is applicable to large scale synthesis, without use of harmful reagents.     

Cleavage of α-(phenylthio)alkylboranes with N-chlorosuccinimide. A convenient route to monothioacetals and acetals

α-(Phenylthio)alkylboranes, which are easily prepared by two different homologation processes, are deboronated by N-chlorosuccinimide in mildly basic methanol to form monothioacetals or, with excess reagent, dimethyl acetals. Both boronic esters and trialkylboranes react, the latter considerably faster. The reaction is specific for the sulfur-substituted alkylborane group, suggesting that initial chlorination occurs at sulfur. Under free radical conditions, α-(phenylthio)alkaneboronic esters are cleaved to α-(phenylthio)alkyl chlorides by either N-chlorosuccinimide or sulfuryl chloride. Pinacol phenylthio(triphenylstannyl)methaneboronate with sulfuryl chloride yielded (phenylthio)dichloromethane, without any evidence of selectivity between carbontin and carbonboron bond cleavage.     

Effect of the alkyl chain of quaternary ammonium cationic surfactants on corrosion inhibition in hydrochloric acid solution

In this study, the effect of the alkyl chain of quaternary ammonium cationic surfactants on corrosion inhibition in hydrochloric acid (HCl) solution was investigated by using dodecyl trimethyl ammonium chloride (DTAC), tetradecyl trimethyl ammonium chloride (TTAC), cetyl trimethyl ammonium chloride (CTAC), and octadecyl trimethyl ammonium chloride (OTAC) as corrosion inhibitors to uncover their structure–efficiency relationships. The effect of the alkyl chain of quaternary ammonium cationic surfactants on corrosion inhibition in HCl solution was studied under different conditions, such as corrosion inhibitor concentration, temperature, and acidity, and this was done using the weightlessness method. The results obtained show that these inhibitors have high corrosion inhibition effect on A₃ steel, and the corrosion inhibition efficiency is dependent on the length of the alkyl chain. At the same concentration, the longer the alkyl chain, the weaker the corrosion inhibition effect. When the temperature was 50 °C and the concentration of corrosion inhibitor was 70 mg/L, the corrosion inhibition efficiency order of the four cationic surfactants was DTAC > TTAC > CTAC > OTAC. Besides, the experimental results obtained show that the adsorption of the inhibitor on the A₃ steel surface conforms to the Langmuir type isotherm, and then the corresponding adsorption thermodynamic parameters were obtained according to these parameters. It was observed that ΔH, ΔS, and E_a increased with increase in the length of the alkyl chain. The adsorption of the inhibitor on the steel surface is an exothermic, spontaneous, entropy process.     

Synthesis of 3,5-difunctionalized 1-methyl-1H-pyrazolo[3,4-b]pyridines involving palladium-mediated coupling reactions

Indirect iodination of 2-chloro-nicotinonitrile gave 2-chloro-5-iodonicotinonitrile, which was cyclized with methylhydrazine to lead to 3-amino-5-iodopyrazolo[3,4-b]pyridine. Position 3 was then protected by pivaloyl group and the resulting 5-iodo-3-pivaloylaminopyrazolo[3,4-b]pyridine was engaged in palladium-promoted coupling reactions with various reagents to give 3-pivaloylamino-5-substituted compounds. Deprotection and iododediazoniation followed by cross-coupling reactions in position 3 afforded novel unsymmetrical 3,5-disubstituted pyrazolo[3,4-b]pyridine species.     

Mass spectra of new heterocycles: XVI. Electron impact study of alkyl 5-aminothiophene-2-carboxylates

Electron impact mass spectra of alkyl 4-alkoxy-5-amino-3-methylthiophene-2-carboxylates were studied for the first time. These compounds, except for 4-(1-ethoxyethoxy) and 4-(ferrocenylmethoxy) derivatives, give rise to a stable molecular ion whose decomposition follows three pathways. The main fragmentation pathway of the molecular ion is elimination of alkyl radical from the 4-alkoxy group, the second pathway involves expulsion of alkoxy group from the ester moiety, and the third pathway is decomposition of the thiophene ring. The molecular ions of 4-(1-ethoxyethoxy)thiophenes decompose mainly via elimination of ethyl vinyl ether molecule with formation of [M–VinOEt]⁺ · odd-electron ion, and fragmentation of the latter follows general pathways. In the mass spectra of 4-(ferrocenylmethoxy)thiophenes the most abundant are ferrocenylmethyl ion with m/z 199 (I _rel 100%) and fragment ions derived therefrom.     

Chemistry of hetero analogs of isoflavones 26. Synthesis of 2-alkyl derivatives of 3-(thiazol-2-yl)-and 3-(benzothiazol-2-yl)chromones

Treatment of substituted 2-(2,4-dihydroxyphenacyl)thiazole and 2-(2,4-dihydroxyphenacyl)benzothiazole with propionic and isobutyric anhydrides gives the substituted 2-ethyl-and 2-isopropyl-7-acyloxychromones. The use of pivaloyl chloride gives 1-pivaloyloxy-2-hetarylstyrene derivatives. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 6, pp. 835–840, June, 2008.     

用卤代乙酸酯与酰卤的格氏偶合反应合成新戊酰乙酸乙酯

卤代乙酸酯与Mg反应形成格氏试剂后,易与酯基发生自身偶合,格氏试剂难以分离,因而很少应用于合成。M0riwake报道用卤代乙酸的叔丁酯代替乙酯,并与酮一起加入到Mg/