Characterization of phase transition of Ba2-xSrxIn2O5 by thermal analysis and high temperature X-ray diffraction

The phase transitions of Ba_2-xSr_xIn₂O₅ were investigated with various thermal analyses and high-temperature X-ray diffraction. It was clarified that crystal structure of Ba_2-xSr_xIn₂O₅ with x=0.0~0.4 varies from brownmillerite through distorted perovskite to another distorted perovskite with increase of temperature. The phase transition from brownmillerite to distorted perovskite was revealed to be first order, whereas transition from distorted perovskite to another one was second order. The specimen with x≥0.5 showed only one first order phase transition from brownmillerite to distorted perovskite. The phase diagram of Ba_2-xSr_xIn₂O₅ was established and existence of tricritical point at ~1100°C with x=0.4~0.5 was suggested. This revised version was published online in August 2006 with corrections to the Cover Date.     

Thiosemicarbazone complexes of the platinum metals. A story of variable coordination modes

Salicylaldehyde thiosemicarbazone (H₂saltsc) reacts with [M(PPh₃)₃X₂] (M = Ru, Os; X = Cl, Br) to afford complexes of type [M(PPh₃)₂(Hsaltsc)₂], in which the salicylaldehyde thiosemicarbazone ligand is coordinated to the metal as a bidentate N,S-donor forming a four-membered chelate ring. Reaction of benzaldehyde thiosemicarbazones (Hbztsc-R) with [M(PPh₃)₃X₂] also affords complexes of similar type, viz. [M(PPh₃)₂(bztsc-R)₂], in which the benzaldehyde thiosemicarbazones have also been found to coordinate the metal as a bidentate N,S-donor forming a four-membered chelate ring as before. Reaction of the Hbztsc-R ligands has also been carried out with [M(bpy)₂X₂] (M = Ru, Os; X = Cl, Br), which has afforded complexes of type [M(bpy)₂(bztsc-R)]⁺, which have been isolated as perchlorate salts. Coordination mode of bztsc-R has been found to be the same as before. Structure of the Hbztsc-OMe ligand has been determined and some molecular modelling studies have been carried out determine the reason for the observed mode of coordination. Reaction of acetone thiosemicarbazone (Hactsc) has then been carried out with [M(bpy)₂X₂] to afford the [M(bpy)₂(actsc)]ClO₄ complexes, in which the actsc ligand coordinates the metal as a bidentate N,S-donorformingafive-membered chelate ring. Reaction of H₂saltsc has been carried out with [Ru(bpy)₂Cl₂] to prepare the [Ru(bpy)₂(Hsaltsc)]ClO₄ complex, which has then been reacted with one equivalent of nickel perchlorate to afford an octanuclear complex of type [Ru(bpy)₂(saltsc-H)₄Ni₄](ClO₄)₄.     

The Crystal and Molecular Structures of Two Acid-Catalysed Rearrangement Products of Taxochinon

The structures of two acid catalysed rearrangement products of taxochinone ( 1 ) have been determined by X-ray analysis. One of the products turned out to be a 20 (10→9) abeo-abietane ( 2 ), the other an optically inactive phenalenone ( 3 ). Crystals of the former compound, C₂₀H₂₆O₃, belong to space group P2₁2₁2₁ with four molecules per cell and the structure was refined with 879 significant reflexions to R = 0.032. Crystals of the latter compound, C₂₀H₂₂O₂, belong to space group P2₁/c with 12 molecules per cell and the structure was refined with 1823 significant reflexions to R = 0.058.     

不同硅铝比Al-ITQ-13分子筛的甲醇制丙烯反应催化性能

采用晶种法直接合成了硅铝比(SiO_2/Al_2O_3物质的量比)为137、224和309的三种Al-ITQ-13分子筛,并采用粉末X射线衍射(XRD)、扫描电镜(SEM)、N_2吸附-脱附、固体核磁共振(MAS NMR)和NH_3-程序升温脱附(NH_3-TPD)等分析方法对不同硅铝比分子筛进行了表征,并在固定床微型反应评价装置上,考察了硅铝比对甲醇转化制丙烯反应性能的影响。结果表明,不同硅铝比Al-ITQ-13分子筛呈现出相似的织构性质,酸量及酸强度随着硅铝比的升高逐渐下降。硅铝比对甲醇转化反应的产物分布存在较大的影响;随着硅铝比的升高,氢转移反应和芳构化反应活性降低,使得乙烯选择性下降,而丙烯和丁烯的选择性升高。硅铝比由137提高到309,丙烯的选择性(质量分数)由46.04%增加到55.52%,而丙烯/乙烯比由3.39提高到6.57。     

High Temperature Oxidation of Fe22Cr-alloy

The isothermal and constant heating rate oxidation behaviour of the alloy Fe₇₈Cr₂₂ was examined in air with 1% H₂O and in 7% H₂/93% Ar with 1% or 12% H₂O. The measurements were performed in the temperature range 700–1300°C. The effect of surface treatment prior to oxidation was examined. A Cr₂O₃ scale developed slowly up to900°C. At 1100°C a catastrophic oxidation was observed after heat treatment for 70 h in air with 1% H₂O and in 7% H₂/93% Ar with 12% H₂O. The scale developed in these cases consisted of iron rich oxides such as Fe₂O₃ or FeCr₂O₄, in contrast to the more protective Cr₂O₃ scale seen under other test conditions. Possible causes for the catastrophic oxidation are discussed. This revised version was published online in July 2006 with corrections to the Cover Date.     

Interaction of zinc oxide clusters with molecules related to the sulfur vulcanization of polyolefins ("rubber")

The vulcanization of rubber by sulfur is a large‐scale industrial process that is only poorly understood, especially the role of zinc oxide, which is added as an activator. We used the highly symmetrical cluster Zn₄O₄ (T_d) as a model species to study the thermodynamics of the initial interaction of various vulcanization‐related molecules with ZnO by DFT methods, mostly at the B3LYP/6‐31+G* level. The interaction energy of Lewis bases with Zn₄O₄ increases in the following order: CO62H₄3H₆2S₂<1,4‐C₅H₈2O2S3N?CH₃COO^?. The corresponding binding energies range from ?57 to ?262 kJ mol^?1. However, Brønsted acids react with the Zn₄O₄ cluster with proton transfer from the ligand molecule to one of the oxygen atoms of Zn₄O₄, and these reactions are all strongly exothermic [binding energies [kJ mol^?1] in parentheses: H₂O (?183), MeOH (?171), H₂S (?245), MeSH (?230), C₃H₆ (?121), and CH₃COOH (?255)]. The important vulcanization accelerator mercaptobenzothiazole (C₇H₅NS₂, MBT) containing several donor sites reacts with the Zn₄O₄ cluster with proton transfer from the NH group to one of the oxygen atoms of ZnO, and in addition the exocyclic thiono sulfur atom and the nitrogen atom coordinate to one and the same zinc atom, resulting in a binding energy of ?247 kJ mol^?1. A second isomer of [(MBT)Zn₄O₄] with a strong O? H???N hydrogen bond rather than a Zn? N bond is only slightly less stable (binding energy ?243 kJ mol^?1). The NH form of free MBT is 36 kJ mol^?1 more stable than the tautomeric SH form, while the sulfurized MBT derivative benzothiazolyl hydrodisulfide C₇H₅NS₃ (BtSSH) is most stable with the connectivity >CSSH.     

Synthesis of fluorosilicone having highly fluorinated alkyl side chains based on the hydrosilylation of fluorinated olefins with polyhydromethylsiloxane

Hydrosilylation of fluorinated olefins with polyhydromethylsiloxane (PHMS) in the presence of a platinum catalyst was investigated to synthesize fluorosilicone having highly fluorinated alkyl side chains (R_f; C_nF_2n+1? ). The hydrosilylation of 3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,10‐heptadecafluoro‐1‐decene (C₈F₁₇CH?CH₂) ( 1 ) with poly(dimethylsiloxane‐co‐hydromethylsiloxane) {(CH₃)₃SiO[? (H)CH₃SiO? ]₈[? (CH₃)₂ SiO? ]₁₈Si(CH₃)₃} ( 4 ) converted the hydrogen bonded to silicons into the 3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,10‐heptadecafluorodecyl group or fluorine bonded to silicons in the ratio of about 52:48, and the formation of the byproduct C₇F₁₅CF?CHCH₃ ( 8 ) was observed. The hydrosilylation of 7,7,8,8,9,9,10,10,11,11,12,12,13,13,14,14,14‐heptadecafluoro‐4‐oxa‐1‐tetradecene (C₈F₁₇CH₂CH₂OCH₂CH?CH₂) ( 2 ) with 4 converted the hydrogen bonded to silicons into the 7,7,8,8,9,9,10,10,11,11,12,12,13,13,14,14,14‐heptadecafluoro‐4‐oxa‐tetradocyl group bonded to silicons, but an excess amount of 2 was required to complete the reaction because the isomerization of 2 occurred in part to form C₈F₁₇CH₂CH₂OCH?CHCH₃ ( 9 ). The hydrosilylation of 4,4,5,5,6,6,7,7,8,8,9,9, 10,10,11,11,11‐heptadecafluoro‐1‐undecene (C₈F₁₇CH₂CH?CH₂) ( 3 ) with 4 converted the hydrogen bonded to silicons into the 4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11‐heptadecafluoroundecyl group bonded to silicons. This type of fluorinated olefin was successfully applied to the hydrosilylation with other PHMS's that involved a homopolymer of PHMS and a cyclic PHMS. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3120–3128, 2002     

Study of the performances of an oxygen carrier: Experimental investigation of the binder's contribution and characterization of its structural modifications

The aim of this work is to investigate the contribution of the binder (NiAl₂O₄) on the performances of the oxygen carrier NiO/NiAl₂O₄. To this purpose, oxidation/reduction cycles have been performed in a fixed bed reactor using CO as a fuel. The results reveal that the binder can react with the fuel to form CO₂, and that its total reduction capacity increases with temperature. XRD characterizations performed on the binder (on the fresh and after several cycles) show a shift of the diffraction peaks of NiAl₂O₄ toward the ones of γ-alumina, which can be attributed to a progressive decomposition of NiAl₂O₄ to alumina and NiO.     

Synthesis of Inorganic Structural Isomers By Diffusion‐Constrained Self‐Assembly of Designed Precursors: A Novel Type of Isomerism

The structure of precursors is used to control the formation of six possible structural isomers that contain four structural units of PbSe and four structural units of NbSe₂: [(PbSe)_1.14]₄[NbSe₂]₄, [(PbSe)_1.14]₃[NbSe₂]₃[(PbSe)_1.14]₁[NbSe₂]₁, [(PbSe)_1.14]₃[NbSe₂]₂[(PbSe)_1.14]₁[NbSe₂]₂, [(PbSe)_1.14]₂[NbSe₂]₃[(PbSe)_1.14]₂[NbSe₂]₁, [(PbSe)_1.14]₂[NbSe₂]₂[(PbSe)_1.14]₁[NbSe₂]₁[(PbSe)_1.14]₁[NbSe₂]₁, [(PbSe)_1.14]₂[NbSe₂]₁[(PbSe)_1.14]₁[NbSe₂]₂[(PbSe)_1.14]₁[NbSe₂]₁. The electrical properties of these compounds vary with the nanoarchitecture. For each pair of constituents, over 20 000 new compounds, each with a specific nanoarchitecture, are possible with the number of structural units equal to 10 or less. This provides opportunities to systematically correlate structure with properties and hence optimize performance.     

Epoxidation of phosphinoyl alkenes with hydrogen peroxide

The epoxidation of alkenylphosphorus compounds with hydrogen peroxide was systematically studied, revealing that while alkenylphosphine oxides failed to produce the corresponding epoxides, alkenylphosphonates, or phosphinates having a phenyl group at α-position reacted with H₂O₂/K₂CO₃ or alkenylphosphonic acids or phosphinic acids having an aliphatic group at α- or β-positions reacted with H₂O₂/Na₂WO₄/Et₃N to produce high yields of the corresponding epoxides.     

The origin of enhanced photocatalytic decomposition of ATP on TiO2 powders as induced by surface modification with lanthanide ions: important roles of ATP adsorption to the modified surface

Surface modification of TiO₂ powders with lanthanide salts (EuCl₃ or YbCl₃) enhanced photocatalytic decomposition of ATP. In comparison with the unmodified catalyst, a 3-fold increase in the ATP decay rate was observed with TiO₂ powders as prepared in 5 mM EuCl₃ (or YbCl₃) solution. The reason was ascribed to enrichment of ATP to TiO₂ powder with the lanthanide ions. Evidence was obtained by adsorption experiments where ATP concentration was monitored after dispersing TiO₂ powders into the solution. The ATP molecules adsorbed faster to TiO₂ powder and strongly stabilized there in the presence of Yb³⁺ than otherwise.     

Studies on the formation of manganese molybdate

The reaction of MoO₃ with various oxides of manganese (MnO, Mn₂O₃, Mn₃O₄ and MnO₂) and with MnCO₃ has been studied in air and nitrogen atmospheres employing DTA, TG and X-ray diffraction methods, with a view to elucidating the conditions for the formation of MnMoO₄. Thermal decomposition of MnCO₃ has also been studied in air and nitrogen atmospheres to help understand the mechanism of the reaction between MnCO₃ and MoO₃. The studies reveal that, whereas MnO, Mn₂O₃ and MnO₂ react smoothly with MoO₃ to form MnMoO₄, Mn₃O₄ does not react with MoO₃ in the temperature range investigated (48O–6OO°C). An equimolar mixture of MnCO₃ and MoO₃ reacts in air to yield MnMoO₄, while only a mixture of Mn₃O₄ and MoO₃ remains as final product when the same reaction is carried out in nitrogen. Marker studies reveal that manganese ions are the main diffusing species in the reaction between MoO₃ and manganese oxides that result in MnMoO₄.     

Ketonization of Secondary Hydroxy Groups of Alcohols and Diols with Hydrogen Peroxide Under the Influence of Tricetylpyridinium-12-Tungstophosphate

Molydbenum and tungsten-catalyzed oxidations of alcohols with dilute hydrogen peroxide under phase-transfer conditions have been focused in recent years 1–3. In a previous paper, we have reported that tricetylpyridinium-12-molybdophosphate(CMP), [π - C₅H₅N+(CH_{2 15}CH₃]₃ (PMO₁₂O₄₀)³-, prepared from 12-molybdophosphoric acid (MPA) and cetylpyridinium chloride (CPC), catalyzed the oxidation of secondary alcohols to carbonyl compounds with tert-butylhydroperoxide(t-BuOOH)⁴. When hydrogen peroxide in place of t-BuOOH was employed as the oxidant for the above oxidation, however, alcohols were oxidized with difficulty to give carbonyl compounds in poor yields. In continuation of this study, we wish to report here the selective oxidation of secondary hydroxy group of alcohols and diols and diols with H₂O₂ under the influence to tricetylpyridinium-12 tungstophosphate (CWP), [π-C₅H₅N+ (CH₂) 15 CH₃]₃(PW₁₂O₄₀)³-, derived from 12-tungstophosporic acid (WPA) and CPC.     

Special features of preparation of nanosized zirconium diboride powders of various dispersity

Products of the zirconium powder reaction with amorphous boron in a Na₂B₄O₇ ionic melt at 650–850°C and those of the ZrCl₄ reaction with NaBH₄ at 300–725°C have been studied by means of X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy, thermogravimetry, and elemental analysis. At temperature ≥750°C, single-phase ZrB₂ with the particle size of 60–80 nm is formed in a Na₂B₄O₇ ionic melt, whereas the ZrB₂ powder obtained via the reaction of ZrCl₄ with NaBH₄ at temperature ≥575°C consists of particles differing in the shape, some of which are close to spherical with diameter of 10–35 nm.     

Tentative Identification of the Reactive Species in the Reaction of Cp2 TiCl2 with Salts of Diacids

The tentative identification of the reactive species in the condensation of Cp₂ TiCl₂ with salts of diacids to form titanium polysters is made. The reactive species are believed to be the same for both aqueous solution and interfacial systems, i.e., R -CO₂ ^? and Cp₂ Ti²⁺ with reaction occurring in the aqueous phase. The condensation of Cp₂ TiCl₂ with disodium terephthalate in interfacial systems occurs via a pseudo-first-order reaction:

Rate = K[Cp₂ TiCl₂] The rate-determining step (s) is believed to be diffusion of CP₂ TiCl₂ into the aqueous layer and/or hydrolysis of Cp₂ TiCl₂     

Quantitative differential thermal analysis of the reduction of uranyl fluoride

The enthalpy of the reduction of UO₂F₂ with hydrogen was obtained from quantitative DTA measurements with a linear heating rate and under isothermal conditions, and the thermodynamic data on UO₂F, formed as a stable intermediate in the reduction of UO₂F₂ to UO₂, are also presented. The advantages of isothermal DTA in the reduction of U₃O₈ to UO₂ could be demonstrated.     

Computer-assisted study of characteristics of water clusters in the presence of nitrogen dioxide

The interaction of IR radiation with water clusters that have absorbed NO₂ molecules is studied by the molecular dynamics method in terms of the polarizable model. Induced dipole moments of H₂O and NO₂ molecules diminish during the addition of one to six NO₂ molecules to (H₂O)₅₀ cluster. The integral intensity of IR absorption by a system consisting of (NO₂) _i (H₂O)₅₀ heteroclusters with 1 ≤ i ≤ 6 decreases, whereas the power of heat emission rises as compared with an (H₂O) _n system. The decrease in the IR absorption and the increase in the IR emission by water clusters with the capture of NO₂ molecules are nonmonotonic. The absorption of NO₂ molecules by water clusters causes a noticeable reduction in the intensity of the first peak and the confluence of the fourth and fifth peaks in the Raman spectrum.     

Effect of epitaxial growth on the formation of the cobalt catalysts of the Fischer-Tropsch synthesis

Mixed oxides Co_xAl_yO₄ with different Al/Co ratios applied as supports for the catalysts of the Fischer-Tropsch synthesis were prepared using the solid-state chemical reaction. The Co_xAl_yO₄ supports were prepared by modifying gibbsite with various cobalt salts (acetate, nitrate, and basic carbonate). The use of basic cobalt carbonate gives the Co(20%)/Co_xAl_yO₄ catalyst, which provides an increased yield of hydrocarbons C₅₊ and a decreased methane content compared to the impregnation catalyst Co(30%)/Al₂O₃. The introduction of small amounts of rhenium additives makes it possible to enhance the yield of hydrocarbons C₅₊ (179 g m⁻³) and also to increase the selectivity with respect to the C₅–C₁₈ fraction. The introduction of basic cobalt carbonate into the support, most likely, creates favorable conditions for the epitaxial growth of the precursor of the active phase. Dedicated to Academician G. A. Abakumov on the occasion of his 70th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1856–1860, September, 2007.     

Scales of Basicity Based on Thermochemical Data of Adducts

Using the values of standard molar enthalpy of reaction for dimethylethyleneurea (dmeu),dimethylformamide (dmf), dimethylacetamide (dma), tetramethylurea (tmu),hexamethylphosphoramide (hmpa) and pyridine (py) with the acids BF₃, SbCl₅, ZnCl₂ and AsCl₃, it is shown that, in terms of acid-base behaviour, ZnCl₂ is closer to BF₃, which differs from SbCl₅. Furthermore, the equation −Δ_r H _m(ZnCl₂) = − [1.26⋅Δ_r H _m(BF₃)]−56.99 correlates with the standard molar enthalpy of reaction for the same set of molecules with ZnCl₂ and BF₃. A similar equation was obtained to estimate the enthalpy of reaction with AsCl₃: −Δ_r H _m(AsCl₃) = − [4.12⋅Δ_r H _m(BF₃)]− 417.82. It is also shown that, for hmpa and tmu, sterical hindrance is a prominent factor that influences the coordination chemistry of the acidic centres, whose deviation from the linearity can be considered as a measure for the steric contribution to Δ_r H _m. This revised version was published online in August 2006 with corrections to the Cover Date.     

Regularities of ring-opening metathesis polymerization of cyclooctene in the presence of molybdenum catalysts

At the initial stages the polymerization of cis-cyclooctene in the bulk with the catalysts Me₃C-CH=Mo(NAr)(OCMe₂CP₃)₂, PhMe₂C-CH=Mo(NAr)(OCMe₂CP₃)₂, Me₃Si-CH=Mo(NAr)(OCMe₂CP₃)₂, and PhMe₂Si-CH=Mo(NAr)(OCMe₂CP₃)₂ predominantly affords cis-polyoctenamers. The content of the trans- units in the polymer increases with an increase in the conversion. The sharpest increase in the trans- unit content observed for conversions higher than 80% is related to secondary metathesis reactions. The number-average molecular weights of the polymers increase linearly with the conversion. At conversions above 80% the molecular weights decrease due to the increasing contribution of chain transfer reactions. Polyoctenamers with the increased content of trans- units crystallize in two modifications.