Pd2dba3/P(i-BuNCH2CH2)3N: a highly efficient catalyst for the one-pot synthesis of trans-4-N,N-diarylaminostilbenes and N,N-diarylaminostyrenes

A Pd₂dba₃/P(i-BuNCH₂CH₂)₃N catalyzed one-pot synthesis of unsymmetrically substituted trans-4-N,N-diarylaminostilbenes and both symmetrically and unsymmetrically substituted N,N-diarylaminostyrene derivatives is reported. The procedure involves two or more palladium catalyzed sequential coupling reactions (an amination and an inter-molecular Heck reaction) in one-pot using the same catalyst system with two different aryl halides, including aryl chlorides and hetero aryl halides as the coupling partners.     

On the catalytic duo PdCl2(PPh3)2/AuCl(PPh3) that cannot effect a Sonogashira-type reaction: a correction

In contrast to the observation made by the Laguna group, we report that the combination of PdCl₂(PPh₃)₂ and AuCl(PPh₃) makes a unique catalytic system that allows Sonogashira-type cross-coupling of both aryl and alkyl alkynes with aryl halides in excellent yields.     

Synthesis of arylaminotetrazoles by ZnCl2/AlCl3/silica as an efficient heterogeneous catalyst

Abstract  

Arylaminotetrazoles were efficiently synthesized from secondary arylcyanamides by application of ZnCl₂/AlCl₃/silica as a reusable heterogeneous Lewis acid catalyst. 5-Arylamino-1H-tetrazoles can be obtained from arylcyanamides carrying electron-withdrawing substituents on the aryl ring, while with electron-releasing groups 1-aryl-5-amino-1H-tetrazoles will be produced. The former isomer is also produced within longer reaction times (~20 h) even with electron-releasing groups.     

Pd2(dba)3/Xantphos-catalyzed cross-coupling of thiols and aryl bromides/triflates

The cross-coupling of aliphatic and aromatic thiols and aryl bromides/triflates mediated by a Pd₂(dba)₃/Xantphos catalytic system in refluxing xylene (140 °C) affords the corresponding aryl thioethers in good to excellent yields.     

trans-Pd(OAc)2(Cy2NH)2 catalyzed Suzuki coupling reactions and its temperature-dependent activities toward aryl bromides

A new catalytic system based on Pd-simple amines for Suzuki coupling reactions of aryl bromides is described. A well-defined air-stable complex, trans-Pd(OAc)₂(Cy₂NH)₂ effectively promotes Suzuki couplings of aryl bromides with a range of aryl boronic acids to give diaryl products in high yields. It also exhibits temperature-dependent activity toward aryl bromides bearing different electronic substituents under reaction conditions.     

Microwave-enhanced and ligand-free copper-catalyzed cyanation of aryl halides with K4[Fe(CN)6] in water

Copper-catalyzed cyanation of aryl halides was improved to be more economical and environmentally friendly by using water as the solvent and ligand-free Cu(OAc)₂·H₂O as the catalyst under microwave heating. The suggested methodology was applicable to a wide range of substrates including aryl iodides and activated aryl bromides.     

Efficient ligand-free copper-catalyzed C-S cross-coupling of thiols with aryl iodides using KF/Al2O3 as base

We report a mild, convenient, environmentally friendly, and ligand-free synthetic protocol for the cross-coupling reaction of aryl iodides and thiols using 10 mol % CuI with KF/Al₂O₃ as the base, in DMF at 110 °C. Using this protocol, we have shown that a variety of aryl sulfides can be synthesized in excellent yields from readily available iodides and thiols.     

Nano TiO2/SO4 as a heterogeneous solid acid catalyst for the synthesis of 5-substited-1H-tetrazoles

An efficient and economical protocol for the synthesis of 5-substituted-1H-tetrazoles from various nitriles and sodium azide is reported using nano TiO₂/SO₄²⁻ as an effective heterogeneous catalyst. A wide variety of aryl nitriles underwent [3 + 2] cycloaddition to afford tetrazoles in good to excellent yields.     

Platinum-alkyl-B(C6F5)3 (or BF3) ‘in situ’ systems as tin(II) halide-free enantioselective hydroformylation catalysts

The dialkyl/diaryl-platinum complexes (Pt(CH₃)₂(bdpp); PtPh₂(bdpp) and Pt(2-Thioph)₂(bdpp), where bdpp stands for (2S,4S)-2,4-bis(diphenylphosphino)pentane) were reacted either with B(C₆F₅)₃, BPh₃ or BF₃. In the presence of PPh₃ or carbon monoxide cationic species with a general formulae [PtR(L)(bdpp)]⁺ (L = PPh₃, CO) were formed exclusively. The ability of boron additives to provide vacant coordination site at the platinum made these systems suitable as hydroformylation catalysts. Enantioselective hydroformylation of styrene was carried out in the presence of in situ catalysts formed from Pt(alkyl/aryl)₂(bdpp) and B(C₆F₅)₃ or BF₃. Moderate e.e-s depending strongly on the structure of the catalytic precursor have been obtained. DFT/PCM calculations reveal an S_N2-type reaction mechanism for the alkyl/aryl ligand abstraction with a notably lower activation barrier for BF₃.     

A first methodical approach to salts with unsymmetrical fluorophenyl(pentafluorophenyl)difluoroiodonium(V) cations [Rf(RF)IF2] (Rf=x-FC6H4, x=2, 3, 4; RF=C6F5)

A promising approach to the unknown type of [Ar′(Ar)IF₂]X salts is offered. x-FC₆H₄IF₄ (x=2, 3, 4) reacts with C₆F₅BF₂ in CH₂Cl₂ and forms [x-FC₆H₄(C₆F₅)IF₂][BF₄] salts in good yields. For [4-FC₆H₄(C₆F₅)IF₂][BF₄] the fluoro-oxidizer property is shown in reactions with weakly reducing agents like E(C₆F₅)₃ (E=P, As, Sb, Bi) and ArI (Ar=4-FC₆H₄, C₆F₅). The fluorine/aryl substitution method is also applied to the synthesis of [(4-FC₆H₄)₂IF₂][BF₄], an example with two identical aryl groups in the difluoroiodonium(V) moiety.     

Ligand-free CuI-catalyzed cyanation of aryl halides using K4[Fe(CN)6] as cyanide source and water as solvent

A methodology for the cyanation of aryl iodides is reported using copper iodide as the catalyst, K₄[Fe(CN)₆] as the cyanide source, and small quantities of water and tetraethylene glycol as the solvent. Reactions are complete within 30 min of microwave heating at 175 °C. A simple work-up procedure has also been devised.     

Efficient cyanation of aryl bromides with K4[Fe(CN)6] catalyzed by a palladium-indolylphosphine complex

This study describes a general palladium-catalyzed cyanation of aryl bromides using K₄[Fe(CN)₆] as the cyanide surrogate. The reactions can be successfully conducted under mild reaction conditions (at 50 °C) in mixed solvents (water/MeCN = 1:1) without any surfactant additives, and afford the desired aryl nitriles in good-to-excellent yields. Particularly noteworthy is that this system allows the mildest reaction temperature reported so far for palladium-catalyzed cyanation of aryl bromides with K₄[Fe(CN)₆] source in general. Common functional groups, including keto, aldehyde, free amine, and heterocyclic substrates are compatible under this system. Interestingly, the phosphine ligands bearing -PCy₂ moiety, which usually show excellent activity in aryl halide couplings, are found less effective than the corresponding ligands with -PPh₂ group.     

[RuCl3(H2O)n]-catalyzed direct arylations

Catalytic amounts of economically attractive [RuCl₃(H₂O)_n] allow for direct arylations via C-H bond functionalization with aryl bromides under phosphine ligand-free reaction conditions. Thereby, a variety of functionalized (hetero)aryl bromides, bearing either electron-withdrawing or electron-releasing substituents, can be employed for direct arylations of pyridine, oxazoline, pyrazole, or ketimine derivatives as pronucleophiles.     

Copper-catalyzed arylation of phenylurea using KF/Al2O3

A mild and efficient method for the copper-catalyzed arylation of phenylurea is described. The coupling reaction of phenylurea with different functionalized aryl iodides in the presence of air stable CuI, N,N′-dibenzylethylenediamine as a ligand, and KF/Al₂O₃ as a base gives symmetrical and unsymmetrical diarylureas in relatively high yields.     

Copper-catalyzed N-arylation of diazoles with aryl bromides using KF/Al2O3: an improved protocol

Copper-catalyzed N-arylation of diazoles can be accomplished using air-stable CuI as a copper source and 1,10-phenanthroline in the presence of KF/Al₂O₃ as a base. This is a simple and efficient method for the coupling of aryl bromide with diazoles. Different functionalized aryl bromides were coupled with diazoles using this system.     

Synthesis of meso-furyl porphyrins with N4, N3S, N2S2 and N3O porphyrin cores

A series of meso-furyl porphyrins with four different porphyrin cores (N₄, N₃S, N₂S₂ and N₃O) were synthesized and characterized. The comparison of NMR, optical and fluorescence properties of meso-furyl porphyrins with porphyrins with six-membered aryl groups indicates that electronic properties of porphyrins were changed drastically on the introduction of furyl groups at meso positions. The maximum shifts in spectral bands were observed for meso-furyl porphyrins with N₂S₂ core. On protonation, the absorption bands of meso-furyl porphyrins were further red shifted. All these changes were ascribed to the possibility of more planarity of the meso-furyl porphyrins due to the small size of the furyl groups which results in extending the π-delocalisation of the porphyrin ring in to the furyl groups.     

[Bmim]PF6 and BF4 ionic liquids as novel and recyclable reaction media for aromatic amination

Activated aryl halides undergo smooth nucleophilic substitution reactions with secondary amines in 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim]PF₆) or 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim]BF₄) ionic liquids (ILs) at room temperature to afford the corresponding arylamines in excellent yields under mild and neutral conditions.     

Co2(CO)8 as a convenient in situ CO source for the direct synthesis of benzamides from aryl halides (Br/I) via aminocarbonylation

A fast, mild, and functional group tolerant method for the direct synthesis of benzamides from aryl halides (Br, I) via aminocarbonylation, using solid Co₂(CO)₈ as a convenient CO source, has been demonstrated. The developed method is applicable to a wide variety of 1° and cyclic and acyclic 2° amines. Nitro substituted (o, m and p) aryl halides have easily been converted to the corresponding benzamides, without the reduction of the nitro group, in high yields using this in situ carbonylation methodology under microwave irradiation.     

FeCl3/PPh3-catalyzed Sonogashira coupling reaction of aryl iodides with terminal alkynes

Conditions for a FeCl₃/PPh₃-catalyzed and palladium-, copper-, amine free-Sonogashira coupling reaction of aryl halides with terminal alkynes are reported. The protocol was applicable to a wide variety of substituted aryl iodides and alkynes with different steric and electronic properties and gave excellent yields of the desired coupling products.     

Pd(OAc)2/DABCO-catalyzed Suzuki-Miyaura cross-coupling reaction in DMF

The scope and limitations of the Pd(OAc)₂/DABCO (1,4-diaza-bicyclo[2.2.2]octane)-catalyzed Suzuki-Miyaura cross-coupling reactions have been demonstrated. The results showed that the effect of solvent had a fundamental influence on the reaction. In the presence of Pd(OAc)₂ and DABCO, both aryl bromides and aryl chlorides all worked well with arylboronic acids to form biaryls, heteroaryl-aryls, and biheteroaryls in moderate to excellent yields using DMF as the solvent. Additionally, the reactions of aryl bromides were conducted under relatively mild conditions.