Unexpected conversion of alkyl azides to alkyl iodides and of aryl azides to N-tert-butyl anilines

In the presence of tert-butyl iodide, alkyl azides are converted into the corresponding iodides at room temperature, whereas, N-t-Bu anilines are obtained from aryl azides under the same experimental conditions. A mechanism is proposed to explain this unusual reactivity.     

Stereoselective cycloaddition of 1-glucosyl-1,3-butadienes with tert-butyl 2H-azirine-3-carboxylate, glyoxylates and imines

Glucosyl dienes 1 have been reacted with the achiral 2H-azirine 4 and with glyoxylates, forming fused structures of type 5 and disaccharide-like compounds 7 with good to excellent selectivity. Glucosyl dienes 1 participated as dienophiles in reactions with Schiff bases derived from anilines forming isoquinolines 10 and 11. The diastereoselectivity of this reaction is poor.     

Hydrogen bond catalyzed chemoselective N-tert-butoxycarbonylation of amines

A novel, chemoselective mono-N-Boc protection of various structurally diverse amines with di-tert-butoxypyrocarbonate (Boc)₂O is described that relies on selective carbonyl activation by hydrogen bond formation. This mild, acid- and metal-free process requires only catalytic amounts of thiourea as hydrogen bond donor.     

Direct conversion of tert-butyl 2-hydroxyalkyl sulfides to 1,3-oxathiolanes

tert-Butyl 2-hydroxyalkyl sulfides, prepared by reaction of epoxides with 2-methylpropane-2-thiol, are converted directly to 1,3-oxathiolanes upon treatment with pivalaldehyde and boron trifluoride diethyl etherate in the presence of thioanisole.     

An efficient method for the conversion of aromatic and aliphatic nitriles to the corresponding N-tert-butyl amides: a modified Ritter reaction

Aromatic and aliphatic nitriles react with tert-butyl acetate in the presence of a catalytic amount of sulfuric acid to give the corresponding N-tert-butyl amides in excellent yields.     

Lewis acid mediated SN2-type nucleophilic ring opening followed by [4+2] cycloaddition of N-tosylazetidines with aldehydes and ketones: synthesis of chiral 1,3-oxazinanes and 1,3-amino alcohols

A highly efficient strategy for Cu(OTf)₂ mediated S_N2-type nucleophilic ring opening followed by [4+2] cycloaddition reactions of enantiopure 2-phenyl-N-tosylazetidines with various aldehydes and ketones afforded a variety of substituted 1,3-oxazinanes and 1,3-amino alcohols in excellent yields, excellent de and good to excellent ee. The proposed S_N2-type mechanism of the cycloaddition reaction is supported by experimental evidence.     

A novel one-pot synthesis of hydroximoyl chlorides and 2-isoxazolines using N-tert-butyl-N-chlorocyanamide

Treatment of aldoximes with N-tert-butyl-N-chlorocyanamide gave hydroximoyl chlorides in quantitative yields in less than a minute, which on dehydrohalogenation in the presence of triethylamine gave the corresponding nitrile oxides. The nitrile oxides underwent 1,3-dipolar addition to dipolarophiles and gave 2-isoxazolines in excellent yields under mild conditions.     

Syntheses and structures of zinc and tin(II) compounds with hemilabile N-silyl-tert-butylamido and N-silyl-p-tolylamido ligands that contain pendent tert-butoxy groups

Syntheses and solid-state structures of zinc and tin(II) compounds, containing the N-silyl-amide ligands (O^tBu)(NR)SiMe₂, R = ^tBu (L^tBu), or R = p-tolyl (L^pTol), are reported. The N-silyl amines were synthesized by modified published procedures from commercially available Me₂SiCl₂, ^tBuOH, and ^tBuNH₂, or p-Me-C₆H₄NH₂, respectively. Treatment of SnCl₂ with LiL^pTol furnished Sn(L^pTol)₂, which was X-ray structurally characterized and shown to contain two covalent Sn-N bonds and two asymmetrical O → Sn donor bonds. The single-crystal X-ray structure of Sn(L^tBu)₂ revealed a much more symmetrically-coordinated, pseudo-trigonal-bipyramidal tin atom. Aminolysis of diethylzinc with HL^pTol produced [EtZn(L^pTol)]₂, which crystallized as a centrosymmetric dimer, containing four-coordinate zinc atoms connected by bridging amides. Zinc dichloride, by contrast, reacted with two equivalents of LiL^tBu to produce the homoleptic, pseudo-spirocyclic Zn(L^tBu)₂.     

The stereoselective addition of titanium(IV) enolates of 1,3-oxazolidin-2-one and 1,3-thiazolidine-2-thione to cyclic N-acyliminium ion. The total synthesis of (+)-isoretronecanol

(+)-Isoretronecanol (1) has been prepared in four steps and 36% overall yield via the diastereoselective addition of the titanium(IV) enolate derived from N-4-chlorobutyryl-1,3-thiazolidine-2-thione (3) to N-Boc-2-methoxypyrrolidine (5), which afforded 2-substituted pyrrolidine 7 in 84% yield (8:1 diastereoisomeric ratio), followed by reductive recovery of the chiral auxiliary and cyclization.     

Alkynylation of N-tosylimines with aryl acetylenes promoted by ZnBr2 and N,N-diisopropylethylamine in acetonitrile

We found a suitable condition for the effective alkynylation of N-tosylimines with aryl acetylenes. The reaction of N-tosylimines and aryl acetylenes in the presence of ZnBr₂ and DIEA (N,N-diisopropylethylamine) in CH₃CN afforded the desired N-tosyl propargylamines in moderate to good yields.     

Facile Cu(OTf)2-catalyzed preparation of 9-tosylaminofluorene derivatives from o-arylated N-tosylbenzaldimines

The 9-tosylaminofluorene derivatives were synthesized conveniently by Cu(OTf)₂-catalyzed aza-Friedel-Crafts reaction of o-arylated N-tosylbenzaldimines in high yields. This is an efficient, atom-economic, and green method.     

Convenient synthesis of porphine from β-tetra(tert-butyl)porphyrin

β-Tetra(tert-butyl)porphyrin was prepared from 2-dimethylaminomethyl-4-tert-butylpyrrole and converted into porphine, the mother compound of porphyrins, in 64% yield. The dealkylation smoothly proceeded in aqueous sulfuric acid over 15 min at 190 °C under nitrogen.     

Aerobic alcohol oxidation using a PdCl2/N,N-dimethylacetamide catalyst system under mild conditions

A new and simple PdCl₂/DMA catalytic system for the alcohol oxidation has been developed using molecular oxygen as the sole oxidant under mild conditions. The catalytic system could be reused for three runs without significant loss of catalytic activity. A variety of active and non-active alcohols were oxidized to their corresponding carbonyl compounds in good to excellent yields. Gas-uptake kinetics for the catalytic system was also investigated. The ca. 1:1 molar ratio of O₂ uptake to product yield is observed, suggesting the in situ formation of H₂O₂.     

Nickel-catalysed addition of dialkylzinc reagents to N-phosphinoyl- and N-sulfonylimines

A catalytic amount of a nickel complex (0.1-5.3 mol %) extraordinarily increases the reaction rate of the addition of dialkylzinc reagents to N-(diphenylphosphinoyl)- or N-(benzenesulfonyl)imines. The reaction of imines derived from both aromatic and aliphatic aldehydes with various dialkylzinc reagents in the presence of several nickel complexes gives the expected addition products in most cases in 1 h and in very good yields. In general, the formation of reduction by-products was not an important side reaction. The process represents a great improvement, with regard to the reaction rate and the yield of the addition products, in comparison with the reactions performed in the absence of the nickel catalyst, and reaction times are much shorter than the ones reported so far using other catalysts.     

Synthesis of the end-capped 5-(N,N-dimethylamino)naphthyl-1-ethynyl derivatives and their 1,4-di[5-(N,N-dimethylamino)naphthyl]-1,3-butadiynes: anti rotamer structure

A new family of the end-capped 5-(N,N-dimethylamino)naphthylethynyl chains were synthesized, as terminal acetylenes or poly(yne) structures, by heterocoupling between 5-iodo-N,N-dimethylnaphthalen-1-amine and 2-methyl-3-butyn-2-ol or 4-(5-iodo-1-naphthyl)-2-methyl-3-butyn-2-ol, catalyzed by the palladium-copper system. Catalytic homocoupling of the terminal acetylenes, affords to 1,4-dinaphthyl-1,3-butadiyne nanostructures. X-ray diffraction analysis of 1,4-di(α-naphthyl)-1,3-butadiyne shows that the naphthalene rings are in the anti configuration along the acetylene axis. All the conjugated compounds show an important fluorescent emission radiation.     

N-Polyfluoroethyl and N-2-chlorodifluorovinyl derivatives of azoles

Reactions of tetrafluoroethylene, chlorotrifluoroethylene and 1,2-dichlorodifluoroethylene with N-potassium salts of imidazole, 2-methylbenzimidazole, 3,5-dimethylpyrazole, 1,2,4-triazole, and benzotriazole lead to the formation of the corresponding N-(1,1,2,2-tetrafluoroethyl), N-(2-chloro-1,1,2-trifluoroethyl), and N-(2-chloro-1,2-difluorovinyl) azoles. Treatment of N-(2-chloro-1,2-difluorovinyl) and N-(2-chloro-1,1,2-trifluoroethyl) derivatives of azoles with tetramethylammonium fluoride is a useful synthetic method for the preparation of heterocycles with 1,2,2,2-tetrafluoroethyl group attached to nitrogen.     

Reactivity of 1-nitronaphthalene and 1,3-dinitronaphthalene with conjugated dienes. An easy access to N-naphthylpyrroles

1-Nitronaphthalene reacts at high temperature with poor and moderately reactive dienes affording N-naphthylpyrroles while, with the same dienes, 1,3-dinitronaphthalene exhibits the dienophilic character of naphthalenic C3C4 bond producing the corresponding phenanthrenes through a classical Diels-Alder process.     

N,N,N,N-Tetramethyl-1,3-propanediamine as the catalyst of choice for the Baylis-Hillman reaction of cycloalkenone: rate acceleration by stabilizing the zwitterionic intermediate via the ion-dipole interaction

N,N,N^′,N^′-Tetramethyl-1,3-propanediamine (TMPDA) can be used as an efficient catalyst for the Baylis-Hillman reaction of cycloalkenones. The increased reaction rate was thought be derived from the stabilizing effect of the zwitterionic intermediate via the ion-dipole interaction.     

Catalytic photocarboxylation of 1,1-diphenylethylene with N,N,N′,N′-tetramethylbenzidine and carbon dioxide

Photocarboxylation of 1,1-diphenylethylene with N,N,N′,N′-tetramethylbenzidine (TMB) in MeCN under bubbling of CO₂ proceeded with high catalytic efficiency, giving 3,3-diphenylacrylic acid (DPA) and 3-hydroxy-3,3-diphenylpropionic acid (20). The turnover number (TON=(DPA+20)/TMB) reached 17. Similarly, 1-phenyl-1-cyclohexene yielded cis-2-acetamido-2-phenylcyclohexanecarboxylic acid with TON 5.9. As compared with related N,N-dimethylaniline derivatives, TMB is more resistant to photodecomposition, has the much larger absorbance in the S₀→S₁ transition, and has the lower quenching efficiency by CO₂. Probably these factors are partly responsible for the high TON observed for TMB.     

N-tert-Butyl-N-chlorocyanamide: a new reagent for the efficient preparation of gem-chloronitroso compounds

A new reagent for the efficient preparation of gem-chloronitroso compounds has been developed. The reaction of ketoximes with N-tert-butyl-N-chlorocyanamide takes place instantaneously in carbon tetrachloride at room temperature with excellent yields under mild conditions.