Red electrophosphorescent platinum(II) quinolinolate complexes

Abstract  

Luminescent organoplatinum complexes featuring 8-quinolinolates as chelating ligands have been synthesized and characterized. Substitution of the quinolinolate ligand has been achieved in the 5 position, where benzoyl substituents were introduced by reacting 8-hydroxyquinoline and the corresponding benzoyl chloride in a Friedel–Crafts acylation. The resulting complexes, κ²(N,C²)-(2-(4-tert-butylphenyl)pyridine)-κ²(N,O)-(5-(4-tert-butylphenyl)(8-quinolinolato-5-yl)methanone)platinum(II) and κ²(N,C²)-(3-hexyloxy-2-phenylpyridine)-κ²(N,O)-((8-quinolinolato-5-yl)phenylmethanone)platinum(II), have been investigated by nuclear magnetic resonance and infrared spectroscopy, matrix-assisted laser desorption ionization time-of-flight mass spectrometry, X-ray analysis, thermal analysis, cyclic voltammetry, UV–vis absorption spectroscopy, and luminescence measurements in solution and in the solid state. The solid-state structures of the complexes were found to be dominated by π–π intermolecular interactions. Organic light-emitting devices based on the complexes and a matching host material gave red to near-infrared electroluminescence with low-onset voltages (4–5 V) and continuous wave luminance intensities exceeding 500 cd/m².     

Synthesis, photophysical and electrophosphorescent properties of fluorene-based platinum(II) complexes

A series of platinum(II) complexes bearing tridentate cyclometalated C^N^N (C^N^N=6-phenyl-2,2'-bipyridine and π-extended R-C^N^N=3-[6'-(naphthalen-2'-yl)pyridin-2'-yl]isoquinoline) ligands with fluorene units have been synthesised and their photophysical properties have been studied. The fluorene units are incorporated into the cyclometalated ligands by a Suzuki coupling reaction. An increase in the π-conjugation of the cyclometalated ligands confers favourable photophysical properties compared to the 6-phenyl-2,2'-bipyridine analogues. The fluorene-based platinum(II) complexes display vibronic-structured emission bands with λ(max)=558-601 nm, and high emission quantum yields up to 0.76 in degassed dichloromethane. Their emissions are tentatively assigned to excited states with mixed (3)IL/(3)MLCT parentage (IL=intraligand, MLCT=metal-to-ligand charge transfer). The crystal structures of these platinum(II) complexes reveal extensive Pt(II)···π and/or π-π interactions. The fluorene-based platinum(II) complexes are soluble in organic solvents, have high thermal stability with decomposition temperature >350 °C, and can be thermally vacuum-sublimed or solution-processed as phosphorescent dopants for the fabrication of organic light-emitting diodes (OLEDs). A monochromic OLED with 3d as dopant (2 wt%) fabricated by vacuum deposition gave a current efficiency of 14.7 cd A(-1) and maximum brightness of 27000 cd m(-2). A high current efficiency (9.2 cd A(-1)) has been achieved in a solution-processed OLED using complex 3f (5 wt%) doped in a PVK (poly(9-vinylcarbazole)) host.     

Photophysics of an electrophosphorescent platinum (II) porphyrin in solid films

We examine electronic processes in platinum (II) octaethyl porphyrin (PtOEP) embedded in an organic solid state matrix and in the form of vacuum-evaporated neat films in conjunction with potential applications of this compound to organic photovoltaic and electrophosphorescent devices. Absorption, photoexcitation, and luminescence spectra indicate the excitonic dimers to be dominant excited states, and their dissociation underlies the charge photogeneration process. Different charge separation distance (1.5 nm and 2.6 nm) in opposite charge carrier pairs preceding dissociation can be distinguished based on the fit of the three-dimensional Onsager theory of geminate recombination to electromodulated luminescence and photoconduction measurements. The near-positive electrode concentrated triplet dimer excitons, produced by strongly 370 nm absorbed light in neat PtOEP films, are efficiently quenched by electron transfer to the metal (Al), generating the positive charge with an efficiency eta+ exceeding 0.15 at high electric fields and dominating the measured photocurrent. Their dissociation efficiency in the bulk, eta- (negatively biased illuminated electrode), is more than one order of magnitude lower than eta+. The dissociation of singlet dimer states dominates the bulk photogeneration process induced by the weakly-absorbed light at 450 nm, with comparable eta+ and eta-. The "hot excited state" underlying the temperature-increasing emission at 540 nm has been attributed to the upper excitonic component Q+ of the first absorption band Q consistent with the exciton concept applied successfully to the interpretation of all dimer-underlain spectroscopic features of PtOEP samples studied.     

Synthesis, characterization and electrophosphorescent properties of mononuclear platinum(II) complexes based on 2-phenylbenzoimidazole derivatives

The rational design, synthesis and characterization of five phosphorescent platinum complexes [(C^N)Pt(acac)] [Hacac = acetylacetone, HC^N = 1-methyl-2-(4-fluorophenyl)benzoimidazole (H-FMBI), 1-methyl-2-phenylbenzoimidazole (H-MBI), 1,2-diphenyl-benzoimidazole (H-PBI), 1-(4-(3,6-di-t-butylcarbazol-9-yl))phenyl-2-phenylbenzoimidazole (t-BuCz-H-PBI), and 1-(4-(3,6-di-(3,6-di-t-butyl-carbazol-9-yl))carbazol-9-yl)phenyl-2-phenylbenzoimidazole (t-BuCzCz-H-PBI)] have been discussed. The crystal structure of (MBI)Pt(acac) shows a nearly ideal square planar geometry around Pt atom and the weak intermolecular interactions with π-π spacing of 3.55 Å. All of the complexes emit green phosphorescence from the metal-to-ligand charge-transfer (MLCT) excited state with high quantum efficiency (0.08-0.17) at room temperature. A multilayer organic light-emitting diode (OLED) with (MBI)Pt(acac) as phosphorescent dopant was fabricated using the method of high-vacuum thermal evaporation, which gives a maximum brightness, luminous and power efficiency of 13 605 cd/m², 15.1 cd/A and 4.3 lm/W, respectively. In contrast, the comparable performance can be achieved in the solution-processed OLED based on (t-BuCzPBI)Pt(acac) with a peak brightness, luminous and power efficiency of 13 606 cd/m², 17.5 cd/A and 8.4 lm/W, respectively. The better device efficiency results from the good square plane of central Pt coordination unit and the inhibition of the aggregates due to bulky and rigid t-butylcarbazole dendrons.     

Organoplumbio complexes of platinum(II)

The complex [Pt(C₂H₄)(PPh₃)₂] reacts with Pb₂Ph₆ to give cis-[PtPh(Pb₂Ph₅)(PPh₃)₂]; this decomposes in solution to cis-[PtPh(PbPh₃)(PPh₃)₂], which may also be obtained from the ethylene complex and PbPh₄. Lead compounds PbPhMe₃ and PbPh₃Br also give products of insertion into PbPh bonds, but PbMe₃Cl gives cis- and trans-[PtCl(PbMe₃)(PPh₃)₂]. The complex trans-[Pt(PbPh₃)₂(PEt₃)₂] reacts with 1,2-bis(diphenylphosphino)ethane (DPPE) to give [Pt(PbPh₃)₂(DPPE)] which readily decomposes in dichloromethane in presence of PEt₃ to give [Pt(PbPh₃)(PEt₃)(DPPE)]Cl and [PtPh(PEt₃)(DPPE)]Cl. The complex trans-[PtCl(PbPh₃)(PEt₃)₂] was detected in the products of reactions between trans-[PtCl₂(PEt₃)₂] and trans-[Pt(PbPh₃)₂(PEt₃)₂] or less than 2 moles of LiPbPh₃; it was not detected in the mixture after treatment of trans -[Pt(PbPh₃)₂(PEt₃)₂] with HCl. In contrast to an earlier report, we were unable to detect lead-containing complexes in the products of the reaction between trans-[PtHCl(PPh₃)₂] and Ph₃PbNO₃. The complexes and their decomposition products were identified by ^pre31P-{¹H} NMR spectroscopy.     

Blue electrophosphorescent organoplatinum(II) complexes with dianionic tetradentate bis(carbene) ligands

Robust charge-neutral Pt(II) complexes containing dianionic tetradentate bis(N-heterocyclic carbene) ligands exhibit intense blue phosphorescence in fluid solutions and in polymer films, and have been vacuum-deposited as a phosphorescent dopant in organic blue-light-emitting diodes.     

True blue: blue-emitting aluminum(III) quinolinolate complexes

Blue-emitting heteroleptic aluminum(III) bis(2-methyl-8-quinolinolate)phenolate complexes were synthesized. A tunable, blue-to-green emission is achieved by attaching electron-withdrawing modulators to the emisssive quinaldinate ligand. The electronic nature of modulator substituents attached to the position of the highest HOMO (highest occupied molecular orbital) density is used to modulate ligand HOMO levels to achieve effective emission tuning to obtain blue-emitting materials. Optical and electrochemical properties of the resulting complexes were investigated and compared to the results of density functional theory (DFT/B3LYP/6-31G*) studies. The resulting materials may find application as organic light-emitting device materials.     

Luminescence of ortho-metallated platinum(II) complexes

The absorption spectra, emission spectra, and emission lifetimes of Pt(Phpy)₂, Pt(Thpy)₂, and Pt(Bhq)₂ complexes (Phpy⁻, Thpy⁻, and Bhq⁻ are the ortho C-deprotonated forms of 2-phenylpyridine, 2-(2-thienyl)-pyridine, and benzo(h)quinoline) have been studied and compared with those of the C-protonated neutral ligands. For all complexes examined the low-energy absorption bands in the near UV and visible region are assigned to metal-to-ligand charge-transfer transitions. The strong and structured luminescence emissions observed in the 500–600 nm region (lifetime in the microsecond range at 77 K) are assigned to metal-to-ligand charge-transfer excited states.     

Organometallic formate complexes of platinum(II)

The compounds trans-[Pt(OCHO)R(PPh₃)₂] (R = C₆Cl₅; 2,3,4,6-C₆HCl₄; 2,3,4,5-C₆HCl₄; 2,5-C₆H₃Cl₂) have been prepared by treatment of [PtIR(PPh₃)₂] with AgClO₄ followed by reaction with NaOCHO in methanol. The cis isomers have been obtained by the direct reaction of HCO₂H with compounds containing PtHg bonds. For these and the analogous compounds containing C₆F₅ ligands, the dependence of J(³¹P¹⁹⁵Pt) on R has been studied, and the effects of cis-R shown to be in the opposite direction from those of trans-R ligands.     

Cationic pentafluorophenyl complexes of platinum(II)

The complex [O₃ClOPt(C₆F₅)(PEt₃)₂] which we have prepared for the first time, is used as a precursor of a series of cationic complexes [LPt(C₆F₅)(PEt₃)₂]ClO₄ (L = PEt₃, AsPh₃, H₂O, CO, OPPh₃, SPPh₃, HNPr₂, py), which are easily obtained by adding L to the perchlorato complex.     

Structural,photophysical, and electrophosphorescent properties of platinum(II) complexes supported by tetradentate N2O2 chelates

We present an examination of the structural and photophysical characteristics of [Pt(N(2)O(2))] complexes bearing bis(phenoxy)diimine auxiliaries (diimine=4,7-Ph(2)phen (1) and 4,4'-tBu(2)bpy (2)) that are tetradentate relatives of the quinolinolato (q) ligand. These neutral derivatives display high thermal stability (>400 degrees C in N(2)). While the crystal lattice in 1 consists of (head-to-tail)-interacting dimers, molecules of 2 are arranged into infinitely stacked planar sheets with possible pi-pi interactions but no close Pt.Pt contacts. Complexes 1 and 2 exhibit moderately intense low-energy UV/Vis absorptions around lambda=400-500 nm that undergo negative solvatochromic shifts. Both derivatives are highly luminescent in solution at 298 K with emission lifetimes in the micros range, and mixed (3)[l-->pi*(diimine)] (l=lone pair/phenoxide) and (3)[Pt(d)-->pi*(diimine)] charge-transfer states are tentatively assigned. The excited-state properties of 2 are also investigated by time-resolved absorption spectroscopy and by quenching experiments with pyridinium acceptors to estimate the excited-state redox potential. These emitters have been employed as electrophosphorescent dopants in multilayer OLEDs. Differences between the brightness, color, and overall performance of devices incorporating 1 and 2 are attributed to the influence of the diimine substituents.     

Palladium(II) and platinum(II) complexes with N-substituted methionines

Summary As an approach to systems containing methionine residues, 3-acetyl-4-hydroxy-6-methyl-2H-pyran-2-one (HDh, dehydroacetic acid) was treated with L-methionine (MetH) or L-methionine methylester (MetM). By condensation at the acyl group and transfer of the phenolic hydrogen on the nitrogen atom, the related ligands DhMetH and DhMetM, were isolated, and form complexes of formula [MX₂(L)₂](M = Pd or Pt, L = DhMetM, X = Cl, Br or I; L = DhMetH, X = Cl or Br) and [MI₂(DhMetH)] with palladium and platinum dihalides. The reaction of the DhMetK carboxylate with MCl₂ in various media is discussed. Ligands and complexes were characterized by i.r. and n.m.r. (¹H and¹³C) spectroscopy and, in some cases, by thermogravimetric measurements. The ligands behave as monodentate sulphur donors, the 12 complexes showing atrans geometry except for [PtCl₂(DhMetH)₂], which is probably a mixture ofcis andtrans isomers.     

Some palladium(II) and platinum(II) lead bonded complexes

Complexes of the type M(PPh₃)₂(PbPh₃)₂ [M = Pd, (Ia) and Pt, (Ib)] have been prepared by oxidative addition of hexaphenyldilead to M(PPh₃)₄. The compound Pt(PPh₃)₂(PbPh₃)₂, (Ib), slowly decomposes in dichloromethane to give cis-Pt(PPh₃)₂(PbPh₃)Ph, (II). which can also be obtained by treating (Ib) with the stoichiometric amount of LiPh. Reaction of Pt(PPh₃)₄ with hexamethyldidead gives the complex Pt(PPh₃)₂(PbMe₃)Me directly.The MPb bonds are easily cleaved by bromine, iodine and hydrogen bromide. The X-ray structure of (II) has been determined using three-dimensional counter data and refined by the least-square method (R = 0.07). The crystals are monoclinic a = 22.501, b = 10.502, c = 24.120 Å, β = 113.43°, space group P2₁/c with Z = 4. The complex exhibits a cis configuration, with the coordination around the platinum atom essentially square-planar: the PtPb and PtC(phenyl)bond lengths are 2.698(1) and 2.055(3)Å, respectively.     

Electrochemistry of platinum(II) coordination compounds II. Electroreduction of trimetallic dimetalliobis(isocyanide)platinum(II) complexes

Linear trimetallic MPPt^IIL₂M complexes (M = Cr(CO)₃(η-C₅H₅), Mo(CO)₃- (η-C₅H₅), W(CO)3(η-C₅-H₅), Mn(CO)₅, Fe(CO)₃NO, Co(CO)₄; L = t-BuNC, cyclo- C₀H₁₁ NC) are reduced on platinum and gold electrodes in non-aqueous medium. All these complexes undergo irreversible one electron reductions, which result in the rupture of one Ptmetal bond and the liberation of one M^? ion per mole reduced. Coupled ESR spectroscopy and coulometry show that a radical is generated during the reduction of the trimetallic complexes. The several ESR signals obtained for these paramagnetic Pt¹ species exhibit no hyperfine structure.The electrochemical behaviour of MPtL₂M complexes is compared with that of the following linear trimetallic complexes: MHgM and (MAuM)^?.     

Mass spectrometric studies on platinum (II) complexes

Several platinum(I1) complexes were subjected to mass spectrometric investigation. The major fragmentation pathways for dichloro-bis(phosphine) platinum(II) were elucidated to be: (i) successive loss of hydrogen chloride or chlorine depending on the structure of the phosphine, (ii) cleavage of P–R bond with the loss of R group, (iii) the presence of [R¹R²R³P—Cl]+ in the mass spectra and (iv) fragmentation of the free phosphine.     

Five-coordinate hydrido / olefin platinum(II) complexes

Stable five-coordinate hydrido / olefin complexes of general formula [Pt(2,9-Me₂-1,10-phenanthroline)H(Cl)(olefin)] have been synthesized in high yield through oxidative addition of HCl to [Pt(2,9-Me₂-1,10-phenanthroline)(olefin)] precursors. Relevant spectroscopic features and some preliminary results concerning the reactivity of the new compounds are also reported.     

Bent dinuclear platinum(II) halo-bridged carbonyl complexes

Crystals of trans-Pt?(μ-X)?X?(CO)? (X = Br, I) have been grown and their molecular and crystalline structures have been solved by X-ray diffraction methods. In both cases the dinuclear molecules are bent, with a bending angle of 164.6° and 156.5° for the bromide and the iodide, respectively. While the structure of the bromo-derivative is reported here for the first time, a modification of trans-Pt?(μ-I)?I?(CO)? with planar centrosymmetric molecules is known. This appears to be a rare case of a platinum(II) halo-bridged derivative structurally characterized in both bent and planar forms.     

Photophysics of diimine platinum(II) bis-acetylide complexes

A comprehensive photophysical investigation has been carried out on a series of eight complexes of the type (diimine)Pt(-C=C-Ar)(2), where diimine is a series of 2,2'-bipyridine (bpy) ligands and -C=C-Ar is a series of substituted aryl acetylide ligands. In one series of complexes, the energy of the Pt --> bpy metal-to-ligand charge transfer (MLCT) excited state is varied by changing the substituents on the 4,4'- and/or the 5,5'-positions of the bpy ligand. In a second series of complexes the electronic demand of the aryl acetylide ligand is varied by changing the para substituent (X) on the aryl ring (X = -CF(3), -CH(3), -OCH(3), and -N(CH(3))(2)). The effect of variation of the substituents on the excited states of the complexes has been assessed by examining their UV-visible absorption, variable-temperature photoluminescence, transient absorption, and time-resolved infrared spectroscopy. In addition, the nonradiative decay rates of the series of complexes are subjected to a quantitative energy gap law analysis. The results of this study reveal that in most cases the photophysics of the complexes is dominated by the energetically low lying Pt --> bpy (3)MLCT state. Some of the complexes also feature a low-lying intraligand (IL) (3)pi,pi excited state that is derived from transitions between pi- and pi-type orbitals localized largely on the aryl acetylide ligands. The involvement of the IL (3)pi,pi state in the photophysics of some of the complexes is signaled by unusual features in the transient absorption, time-resolved infrared, and photoluminescence spectra and in the excited-state decay kinetics. The time-resolved infrared difference spectroscopy indicates that Pt --> bpy MLCT excitation induces a +25 to + 35 cm(-)(1) shift in the frequency of the C=C stretching band. This is the first study to report the effect of MLCT excitation on the vibrational frequency of an acetylide ligand.     

Thermolysis of polynuclear platinum(II) acetamidato complexes

The thermolysis of five polynuclear Pt(II) acetamidato complexes with known structures (I-V) and platinum blue of the composition Pt(NHCOCH₃)₂ · H₂O prepared by two different procedures (VI and VIa) has been studied by differential scanning calorimetry and thermogravimetry. The results of studying the thermolysis of these complexes allows one to assume that the structures of VI and VIa are different: complex VI is polynuclear and consists of binuclear fragments[(H₂O)(NHCOCH₃)Pt(μ-NHCOCH₃)₂Pt(NHCOCH₃)(H₂O)], whereas complex VIa is built of fragments [(H₂O)(NHCOCH₃)Pt(μ-OH)(μ-OH)(μ-NHCOCH₃)Pt(NHCOCH₃)₂].