Carbon electrode modified with ionic liquid and multi-walled carbon nanotubes for voltammetric sensing of adenine

A voltammetric sensor was fabricated by applying a Nafion and multi-walled carbon nanotubes (MWCNTs) composite film on the surface of a carbon ionic liquid electrode (CILE), which was prepared by mixing 1-butyl-3-methylimidazolium hexafluorophosphate with graphite powder. The electrochemical behavior of adenine on the Nafion-MWCNTs/CILE was investigated in pH 5.5 buffer solution. Adenine showed an irreversible adsorption-controlled oxidation reaction with enhanced electrochemical response, which was due to the presence of high conductive MWCNTs on the CILE surface. The electrochemical parameters of adenine electro-oxidation were determined, and the experimental conditions were optimized. Under the optimal conditions, the oxidation peak current was linear to the adenine concentration over the range of 1.0?×?10^?7 to 7.0?×?10^?5 mol L^?1 with a detection limit of 3.3?×?10^?8 mol L^?1 (signal/noise?=?3). The electrode showed good stability and selectivity, and was further applied to milk powder samples with satisfactory results.     

磺胺在碳纳米管修饰玻碳电极上的电化学行为

磺胺类抗菌药是一类允许在饲料中添加的兽用广谱抗菌药.它被广泛用于治疗家畜呼吸道、消化道细菌感染、猪萎缩性鼻炎、禽霍乱、伤寒等疾病[1].停药期用药或用药不当将导致动物食品中抗菌药残留超标.人们长期食用含磺胺类抗菌药残留超标的动物产品,将导致肝肾损伤和体内耐药菌株产生,危害到人们的身体健康和疾病治疗.     

Application of multi-walled carbon nanotubes modified carbon ionic liquid electrode for electrocatalytic oxidation of dopamine

A simple, sensitive, and reliable method based on a multi-walled carbon nanotubes (MWNTs) modified carbon ionic liquid electrode (CILE) has been successfully developed for determination of dopamine (DA) in the presence of ascorbic acid (AA). The acid-treated MWNTs with carboxylic acid functional groups could promote the electron-transfer reaction of DA and inhibit the voltammetric response of AA. Due to the good performance of the ionic liquid, the electrochemical response of DA on the MWNTs/CILE was better than that of other MWNTs modified electrodes. Under the optimum conditions a linear calibration plot was obtained in the range 5.0×10(-8) to 2.0×10(-4) mol L(-1) and the detection limit was 1.0×10(-8) mol L(-1).     

Caffeic acid modified glassy carbon electrode for electrocatalytic oxidation of reduced nicotinamide adenine dinucleotide (NADH)

A new modified electrode was prepared by electrodeposition of caffeic acid (CFA) at the surface of an activated glassy carbon electrode. Cyclic voltammetry was used to investigate the redox properties of this electrode at various solution pH values and at various scan rates. The pH dependence of the electrode response was found to be 58.5 mV/pH, which is very close to the expected Nernstian value. The electrode was also employed to study electrocatalytic oxidation of reduced nicotinamide adenine dinucleotide (NADH), using cyclic voltammetry, chronoamperometry and rotating disk voltammetry as diagnostic techniques. It was found that the modified electrode exhibits potent and persistent electrocatalytic properties toward NADH oxidation in phosphate buffer solution (pH 7.0) with a diminution of the overpotential of about 450 mV compared to the process at an unmodified electrode. The electrocatalytic current increases linearly with NADH concentration in the range tested from 0.05 to 1.0 mM. The apparent charge transfer rate constant and transfer coefficient for electron transfer between the electrode surface and immobilized CFA were calculated as 11.2 s⁻¹ and 0.43, respectively. The heterogeneous rate constant for oxidation of NADH at the CFA-modified electrode surface was also determined and found to be about 3 × 10³ M⁻¹ s⁻¹. Finally, the diffusion coefficient of NADH was calculated as 3.24 × 10⁻⁶ cm² s⁻¹ for the experimental conditions, using chronoamperometric results. Received: 6 January 1999 / Accepted: 11 May 1999     

Electrocatalytic oxidation of hydrazine at a glassy carbon electrode modified with nickel ferrite and multi-walled carbon nanotubes

A hydrothermal technique was used to synthesize nickel ferrite nanoparticles (NF-NPs) deposited on multi-walled carbon nanotubes (MWCNTs). The material was characterized by scanning electron microscopy, energy dispersive spectrometry, and X-ray powder diffraction which showed that the NF-NPs are located on the surface of the carboxylated MWCNTs. The material was used to modify a glassy carbon electrode which then was characterized via cyclic voltammetry, electrochemical impedance spectroscopy, and amperometry. The electrode displays strong electrochemical response to hydrazine. A potential hydrazine sensing scheme is suggested.

Electrocatalytic oxidation of reduced nicotinamide adenine dinucleotide (NADH) at thick-film gold electrodes

Cyclic voltammetric and electrochemical impedance spectroscopic investigations of screen-printed, thick-film gold electrodes reveal significant differences when compared with conventional polished gold disk electrodes of comparable size. The rough and porous structure of the thick-film electrode surface leads to an actual electrode area which is increased six-fold compared to polished disk electrodes. Due to the catalytic properties of these surface structures it is possible to perform the electrochemical oxidation of reduced nicotinamide adenine dinucleotide (NADH) at relatively low overpotentials, i.e. +0.145 V vs. SCE. By operating electrodes at this potential, electrode fouling processes and interference from electroactive species, e.g. acetaminophen, are minimized. An amperometric glucose sensor based on polymer matrix-entrapped glucose dehydrogenase with a working potential of +0.145 V vs. SCE was successfully incorporated into a flow injection analysis (FIA) system.     

Photolytic oxidation of reduced nicotinamide adenine dinucleotide

A photo-reaction between thionine dye and NADH has been observed which leads to the oxidation of the co-factor. Thionine (fluorescent), which is converted into semi/leuko thionine (non-fluorescent) during light reaction, fully recovers during the dark reaction. Analytical applications of this discovery are discussed. This reaction opens the door to the measurement of NADH using the fluorescence quenching of thionine and to the construction of several optical biosensors.     

Low-potential nicotinamide adenine dinucleotide detection at a glassy carbon electrode modified with toluidine blue O functionalized multiwall carbon nanotubes.

The toluidine blue O (TBO) functionalized multiwall carbon nanotubes (MWNTs) nanomaterials (TBO-MWNTs) were prepared by assembling TBO onto the surface of a MWNTs modified glassy carbon (GC) electrode. Also TBO-MWNTs modified GC electrodes exhibiting a strong and stable electrocatalytic response toward beta-nicotinamide adenine dinucleotide (NADH) were described. Compared with a bare GC electrode, the TBO-MWNTs modified GC electrodes could decrease the oxidization overpotential of NADH by 730 mV, with a peak current at 0.0 V, since there was a positively synergistic electrocatalytic effect between the MWNTs and TBO toward NADH. Furthermore, the TBO-MWNTs modified GC electrodes had perfect performances, such as a low detection limit (down to 0.5 microM), being very stable (the current diminutions is lower than 6% in a period over 35 min), a fast response (within 3 s), and a wide linear range (from 2.0 microM to 3.5 mM). Such an ability of TBO-MWNTs to promote the NADH electron-transfer reaction suggests great promise for dehydrogenase-based amperometric biosensors.     

Voltammetric oxidation and determination of cinnarizine at glassy carbon electrode modified with multi-walled carbon nanotubes

We discovered a novel method to prepare a protein-based hydrogel, that is, a “Three-Dimensional Nanostructured Protein Hydrogel (3D NPH)”, which is composed of protein–polymer hybrid nanoparticles. In this study, we propose a novel protein microarray whose 3D NPH spots were prepared by dispensing a small volume of the solution of protein–polymer mixture on a substrate. The dispensed solution had a short time for cross-linking before its drying-up and the resulting 3D NPH had loosely cross-linked, thin spongy structure. Therefore, the reaction ratio between ligands and analytes was drastically improved in this system compared with the large volume system for Surface Plasmon Resonance (SPR) protein microarray.     

Electrocatalytic oxidation of dopamine at an ionic liquid modified carbon paste electrode and its analytical application

A room-temperature ionic liquid N-butylpyridinium hexafluorophosphate was used as a binder to construct an ionic liquid modified carbon paste electrode, which was characterized by scanning electron microscopy and electrochemical impedance spectroscopy. The ionic liquid carbon paste electrode (IL-CPE) showed enhanced electrochemical response and strong analytical activity towards the electrochemical oxidation of dopamine (DA). A pair of well-defined quasireversible redox peaks of DA appeared, with the redox peaks located at 215 mV (E _pa) and 151 mV (E _pc) (vs. the saturated calomel electrode, SCE) in pH 6.0 phosphate buffer solution. The formal potential (E ^0′) was calculated as 183 mV (vs. SCE) and the peak-to-peak separation as 64 mV. The electrochemical behavior of DA on the IL-CPE was carefully investigated. Under the optimal conditions, the anodic peak currents increased linearly with the concentration of DA in the range 1.0 × 10⁻⁶–8.0 × 10⁻⁴ mol/L and the detection limit was calculated as 7.0 × 10⁻⁷ mol/L (3σ). The interferences of foreign substances were investigated and the proposed method was successfully applied to the determination of DA injection samples. The IL-CPE fabricated was sensitive, selective and showed good ability to distinguish the coexisting ascorbic acid and uric acid.     

Graphene-carbon nanotubes modified graphite electrode for the determination of nicotinamide adenine dinucleotide and fabrication of alcohol biosensor

Through layer-by-layer adsorption (LBL) technique, the positively charged multiwalled carbon nanotubes (MWCNTs) and negatively charged graphene multilayer film were formed on graphite-poly(diallyldimethylammoniumchloride)-polystyrenesulphonate (Gr/PDDA/PSS) modified electrode. Due to large surface area and remarkable electrocatalytic properties of MWCNTs and graphene, the Gr/(PDDA/PSS-[MWCNTs-NH ₃ ⁺ -graphene-COO^?]₅) electrode exhibits potent electrocatalytic activity towards the electro-oxidation of nicotinamide adenine dinucleotide (NADH). A substantial decrease in the overpotential was observed at modified electrode, and the electrode showed high sensitivity to the electrocatalytic oxidation of NADH. The modified electrode was characterized by cyclic voltammetry and electrochemical impedance spectroscopy. The diffusion coefficient was calculated by chronocoulometry. Chronoamperometric studies showed the linear relationship between oxidation peak current and the concentration of NADH in the range 25–250?μM (R?=?0.999) with the detection limit of 0.1?μM (S/N?=?3). Further, dopamine, uric acid, acetaminophen and hydrogen peroxide do not interfere in the detection of NADH. The ability of MWCNTs and graphene to promote the electron transfer between NADH and the electrode exhibits a promising biocompatible platform for development of dehydrogenase-based amperometric biosensors. Alcohol dehydrogenase (ADH) was casted on Gr/(PDDA/PSS-[MWCNTs-NH ₃ ⁺ -graphene-COO^?]₅) electrode; the resulting biosensor showed rapid and high sensitive amperometric response to ethanol with the detection limit of 10?μM (S/N?=?3).     

百里香酚在聚甲苯胺蓝/多壁碳纳米管修饰电极上的电催化氧化动力学研究

采用电聚合、滴涂及多层修饰方法制备了4种修饰电极,百里香酚在几种修饰电极上均是不可逆电氧化反应,其中聚甲苯胺蓝/多壁碳纳米管修饰电极的电催化效果最佳,过电位降低了111mV,氧化峰电流增大了5倍。在pH为7.69的PBS溶液中,百里香酚在聚甲苯胺蓝/多壁碳纳米管修饰电极上是电子转移数和质子数均为1的扩散控制不可逆电氧化过程,扩散系数D=4.8470×10-4cm2/s,电极有效面积A=0.0383cm2。氧化峰电流ip与浓度c在9.0×10-6～5.0×10-4mol/L范围内呈良好的线性关系:ip(A)=-3.781×10-5-0.0491c(mol/L),相关系数R=-0.9958,样品测定回收率为96.88%～101.50%。     

Sensitive determination of 4-nitrophenol based on multi-walled carbon nano-tube/ionic liquid/chitosan composite film modified electrode

A composite film modified glassy carbon electrode (GCE) fabricated with spinning coating of multiwalled carbon nano-tube (MWNT) /1-butyl-3-methylimidazolium tetrafluoroborate/chitosan sol was developed for the electrochemical determination of 4-nitrophenol (4-NP). An obvious reduction peak located at about −0.688 V was observed with voltammetric measurements in the potential range from 0.200 V to −1.00 V. Compared with the bare GCE, the reduction peak potential shifted positively and the peak current increased significantly. All experimental parameters for the determination of 4-NP were optimized. It was found that the reduction peak current was proportional to 4-NP concentration in the range from 3.00 × 10⁻⁷ to 2.00 × 10⁻⁵ mol l⁻¹ with the detect limitation of 1.00 × 10⁻⁷ mol l⁻¹ (S/N = 3) after accumulation for 90 s. The proposed method was successfully applied for the determination of trace amounts of 4-NP in lake water.     

Electrocatalytic oxidation of nitric oxide at nano-TiO2/Nafion composite film modified glassy carbon electrode

A novel nanocrystalline TiO₂ (nano-TiO₂) and Nafion composite film modified glassy carbon electrode has been developed for the determination of nitric oxide (NO) radical in an aqueous solution. This modified electrode can be employed as a NO sensor with a low detection limit, fast response, high sensitivity and selectivity. Two apparent anodic peaks were observed at 0.67 and 0.95 V at the nano-TiO₂ modified glassy carbon electrode by differential pulse voltammetry (DPV). After further modification with a thin film of Nafion, which was capable of preventing some anionic interference such as nitrite and ascorbic acid, only one peak appeared and the peak current enhanced greatly. The chronocoulometric experimental results showed NO was oxidized by one-electron transfer reaction at the composite film modified electrode. The amperometric responses increased linearly with the concentrations of NO ranging from 3.6×10⁻⁷ mol/L to 5.4×10⁻⁵ mol/L. The detection limit was estimated to be 5.4×10⁻⁸ mol/L. In this sensor system, the modification film provides complete selectivity for NO over nitrite anions (NO₂⁻).     

花旗松素在碳纳米管-离子液体修饰碳糊电极上的电催化氧化及其测定

制备了碳纳米管(MWCNTs)和疏水性离子液体N-丁基吡啶六氟磷酸盐([Bu Py]PF6)复合修饰碳糊电极(MWCNTs-[Bu Py]PF6/CPE),利用循环伏安法研究了花旗松素在MWCNTs-[Bu Py]PF6/CPE上的电化学氧化行为。结果表明,花旗松素在修饰电极上出现一对灵敏、准可逆的氧化还原峰,氧化峰电位Epa=0.60 V,还原峰电位Epc=0.24 V,△Ep=0.46 V,氧化峰电流ipa=3.96μA,还原峰电流ipc=5.03μA,ipa/ipc=0.79,表明MWCNTs-[Bu Py]PF6/CPE对花旗松素具有良好的电催化氧化作用。用差分脉冲伏安法(DPV)测得花旗松素的氧化峰电流ipa与浓度c在1.2×10-5~4.0×10-2g·L-1范围内呈良好线性,检出限为2.2×10-6g·L-1。该法用于水红花子中花旗松素含量的测定,RSD为1.1%~1.5%,加标回收率为97.3%~101.3%。     

Electrochemical oxidation of sulfur-containing amino acids on an electrode modified with multi-walled carbon nanotubes

MWNT-modified electrodes are introduced for the voltammetric determination of sulfur-containing amino acids. The morphology of the electrode surface has been characterized by atomic force microscopy. The MWNT layer consists of deeply intertwined vermicular structures with the average diameter of 25 nm. Cysteine, glutathione and methionine are oxidized on the electrode while only cysteine gives signals on the glassy carbon (GC) electrode. The application of such electrodes leads to a decreased overpotential and increase of oxidation currents for cysteine in comparison with a bare GC electrode. The schemes of oxidation are proposed. A decrease of the lower limit of determination and an enlargement of the analytical range for antioxidants were obtained. A simple, fast and accurate procedure for the voltammetric determination of methionine in pharmaceuticals has been developed and can be recommended for quality control purposes.     

苦参碱在多壁碳纳米管修饰玻碳电极上的电催化氧化及其电分析方法

研究了苦参碱(Matrine, MT) 在多壁碳纳米管修饰玻碳电极(MWCNT/GCE)上的电化学行为. 与GCE相比, MT在MWCNT/GCE上峰电位负移120 mV, 峰电流增大约2.5倍, 表明MWCNT/GCE对MT的电化学氧化具有良好的催化作用. 同时测定并计算了MT在MWCNT/GCE上的电极过程动力学参数: 电子转移系数α、电极反应速率常数ks、扩散系数D. 运用差分脉冲伏安法对苦参碱样品含量进行测定, 相对标准偏差为0.12%～2.9%, 加标回收率为98.4%～99.0%. 该方法可用于MT的电化学定量测定.