Surface-initiated molecularly imprinted polymeric column: In situ synthesis and application for semi-preparative separation by high performance liquid chromatography

In this work, we prepared a monolithic and surface initiated molecularly imprinted polymeric (MIP) column for HPLC and explored its application for template separation from plant extract. The silica beads (40-60 μm) were coupled with initiator on the surface and then packed in to a stainless steel HPLC column. The pre-polymerization mixture (the template, functional monomer and crosslinker were emodin, acrylamide and divinylbenzene, respectively) was injected into the column and polymerized by thermal initiation. The prepared MIP column exhibited excellent retention capability and large imprinted factor for template (the retention time and imprinted factor for emodin on MIP column were 16.26 min and 7.21, respectively). Moreover, the emodin-molecularly imprinted polymeric column could be applied to separate emodin from alcohol extract of Rheum palmatum L. at semi-preparative scale and 1.2 mg of emodin was obtained in 4 h.     

Separation of bacteria with imprinted polymeric films

Separation of compounds out of complex mixtures is a key issue that has been solved for small molecules by chromatography. However, general methods for the separation of large bio-particles, such as cells, are still challenging. We demonstrate integration of imprinted polymeric films (IPF) into a microfluidic chip, which preferentially capture cells matching an imprint template, and separate strains of cyanobacteria with 80-90% efficiency, despite a minimal difference in morphology and fluorescence, demonstrating its general nature. It is currently thought that the imprinting process, conducted while the polymer cures, transfers chemical information of the cell's external structure to the substrate. Capture specificity and separation can be further enhanced by orienting the imprints parallel to the flow vector and tuning the pH to a lower range.     

Evidence of mechanisms occurring in thermally induced phase separation of polymeric systems

Thermally induced phase separation is a fabrication technique for porous polymeric structures. By means of easy‐to‐tune processing parameters, such as system composition and demixing temperature, a vast latitude of average pore dimensions, pore size distributions, and morphologies can be obtained. The relation between demixing temperature and morphology was demonstrated via cloud point curve measurement and foams fabrication with controlled thermal protocols, for the model system poly‐l ‐lactide–dioxane–water. The morphologies obtained at a temperature lower than cloud point showed a closed‐pore architecture, suggesting a “nucleation‐and‐growth” separation mechanism, which produced larger pores at higher holding times. Conversely, the porous structures attained when holding the sample above the cloud point exhibited open pores with dimensions independent of time, denoting a phase separation occurring during sample freezing. Finally, the influence of the cooling rate on final morphology was investigated, showing a clear correlation with microstructure and pore size. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 979–983     

Porous molecularly imprinted polymer membranes and polymeric particles

Porous free-standing molecularly imprinted polymer membranes were synthesised by the method of in situ polymerisation using the principle of synthesis of interpenetrating polymer networks and tested in solid-phase extraction of triazine herbicides from aqueous solutions. Atrazine-specific MIP membranes were obtained by the UV-initiated co-polymerisation of methacrylic acid, tri(ethylene glycol) dimethacrylate, and oligourethane acrylate in the presence of a template (atrazine). Addition of oligourethane acrylate provided formation of the highly cross-linked MIP in a form of a free-standing 60 μm thick flexible membrane. High water fluxes through the MIP membranes were achieved due to addition of linear polymers (polyethylene glycol M_w 20,000 and polyurethane M_w 40,000) to the initial mixture of monomers before the polymerization. As a result, typical semi-interpenetrating polymer networks (semi-IPNs) have been formed, where the cross-linked polymer was represented by the atrazine-specific molecularly imprinted polymer, while the linear one was represented by polyethylene glycol/polyurethane. Extraction of the linear polymers from the fully formed semi-IPNs resulted in formation of large pores in the membrane structure. At the same time, extraction of the template molecules lead to formation of the sites in the polymeric network, which in shape and arrangement of functional groups are complementary to atrazine. Reference polymeric membranes were prepared from the same mixture of monomers but in the absence of the template. Recognition properties of the MIP membranes were estimated in solid-phase extraction by their ability to selective re-adsorbtion of atrazine from 10⁻⁸ to 10⁻⁴ M aqueous solutions. The imprinting effect was demonstrated for both types of the MIP membranes and the influence of the type of the linear compound on their recognition properties was estimated. The recognition properties of the MIP membranes were compared to those of the MIP particles of the same composition. Morphology of the MIP membranes was investigated using the SEM microscopy. High fluxes of the developed membranes together with high affinity and adsorption capability make them an attractive alternative to MIP particles in separation processes.     

Development of molecularly imprinted polymeric nanofibers by electrospinning and applications to pesticide adsorption

Novel polystyrene‐based molecularly imprinted polymer nanofibers were synthesized through the electrospinning technique. The molecularly imprinted polymers were prepared using a non‐covalent approach and atrazine as template. For comparison, nonimprinted polymer nanofibers were also synthesized. The morphology of the synthesized nanofibers was characterized using scanning electron microscopy. The adsorption of pesticides, atrazine, atrazine desisopropyl, atraton, carboxin, linuron, and chlorpyrifos was studied under equilibrium (batch) conditions. To describe the adsorption capability of the synthesized polymers, Langmuir and Freundlich models were used. The Freundlich model provided a better mathematical approximation of the sorption characteristic for polymers nanofibers. To evaluate the adsorption capacity in the presence of interferents experiments on river water samples spiked with a mixture of six pesticides were also performed. The results obtained for the highest concentration levels investigated, show a greater amount of pesticide adsorbed on molecularly imprinted polymers and non‐imprinted polymers compared to those obtained using commercial stationary phases used as reference.     

Novel preparation of monolithic imprinted columns for electrochromatographic separation by photopolymerization

A monolithic molecularly imprinted polymer with specific recognition ability for 4-hydroxybenzoic acid (4-HBA) was prepared by in situ photopolymerization, using methacrylic acid (MAA) as a functional monomer, ethylene glycol dimethacrylate (EDMA) as a cross-linking agent, toluene and isooctane as porogenic solvents and Irgacure 1800 as an initiator. Baseline separation of isomers of hydroxybenzoic acid was achieved in less than 8 min on this monolithic column using 4-HBA as template, but not on the blank polymer. Furthermore, some neutral compounds could also be baseline-separated on the imprinted polymer column in the mode of pressure-driven capillary electrochromatography.     

Molecularly imprinted polymeric film on semiconductor nanoparticles analyte detection by quantum dot photoluminescence

Incorporation of semiconductor nanoparticles into molecularly imprinted polymer provides a sensor material which can be easily shaped and with better selectivity because the bound template would quench the photoluminescence (PL) emission of quantum dots significantly. In this work, artificial receptors of various templates were synthesized with functional monomers such as methacrylic acid (MAA), semiconductor like CdSe/ZnS core-shell derivatized with 4-vinylpyridine and ethylene glycol dimethacrylic acid as the cross-linker. The quenching of photoluminescence emissions is presumably due to the fluorescence resonance energy transfer between quantum dots and template molecules. The photoluminescence emission is unaffected upon incubation of analyte with the blank control polymer.     

大黄酸分子印迹聚合物微球的制备及特性

以聚苯乙烯微球为种球,大黄酸为模板分子,采用单步溶胀聚合法在N,N-二甲基甲酰胺体系中制备了单分散分子印迹聚合物微球.用扫描电镜对微球的结构和形貌进行了表征,并研究了微球的制备条件和吸附特性.微球的凹槽可有效地增加微球的比表面积和结合位点,从而提高了模板分子的结合速率及微球的印迹容量.     

Selective enrichment and separation of phosphotyrosine peptides by thermosensitive molecularly imprinted polymers

Novel thermosensitive molecularly imprinted polymers were successfully prepared using the epitope imprinting approach in the presence of the mimic template phenylphosphonic acid, the functional monomer vinylphosphonic acid‐Ti⁴⁺, the temperature‐sensitive monomer N‐isopropylacrylamide and the crosslinker N,N′‐methylenebisacrylamide. The ratio of the template/thermosensitive monomers/crosslinker was optimized, and when the ratio was 2:2:1, the prepared thermosensitive molecularly imprinted polymers had the highest imprinting factor. The synthetic thermosensitive molecularly imprinted polymers were characterized by Fourier transform infrared spectroscopy to reveal the combination and elution processes of the template. Then, the adsorption capacity and thermosensitivity was measured. When the temperature was 28°C, the imprinting factor was the highest. The selectivity and adsorption capacity of the thermosensitive molecularly imprinted polymers for phosphotyrosine peptides from a mixture of three tailor‐made peptides were measured by high‐performance liquid chromatography. The results showed that the thermosensitive molecularly imprinted polymers have good selectivity for phosphotyrosine peptides. Finally, the imprinted hydrogels were applied to specifically adsorb phosphotyrosine peptides from a sample mixture containing phosphotyrosine and a tryptic digest of β‐casein, which demonstrated high selectivity. After four rebinding cycles, 78.9% adsorption efficiency was still retained.     

Molecularly imprinted adsorbents for positional isomer separation.

2,4-Dihydroxybenzophenone (2,4-DHB) imprinted polymers were synthesized by surface imprinting technique, using allyl alcohol as the functional monomer. The polymers showed a very high selectivity for 2,4-DHB when compared with various positional isomers such as 2-HB, 2,2'-DHB, 4,4'-DHIB and 4,4'-DMB. Solvents were found to affect the selectivity as well as sorption capacity in the case of surface imprinted polymers. The selectivities decreased drastically when the imprint cavity was blocked. This validated the importance of the cavity and the rebinding interactions in governing the selectivity in the case of MIPs. The surface imprinted polymers also showed a high selectivity under non-equilibrium conditions thereby making them suitable adsorbents for industrial separations.     

Strategies for the generation of molecularly imprinted polymeric nitroxide catalysts

[reaction: see text] Two strategies for preparing catalytically active molecularly imprinted nitroxide-containing polymers are outlined. Both strategies rely upon the thermal rearrangement chemistry of tertiary amine N-oxides. To this end, several polymers were prepared and the polymeric nitroxides were revealed by oxidation with m-CPBA. All of the resulting polymeric catalysts proved to be competent mediators of the oxidation of alcohols.     

Selective separation of magnolol using molecularly imprinted membranes

Molecularly imprinted membranes (MIMs) for selective separation of magnolol were prepared by thermal polymerization using magnolol as the template, ethylene glycol dimethacrylate (EGDMA) as the cross‐linker, 2,2‐azobisisobutyronitrile (AIBN) as the initiator, organic solvent as the porogen, methacrylamide (MAM) and acrylic acid (AA) as the functional monomers and cellulose acetate as the agglutinant. Commercial filter paper was used as the supporting material. The effects of different porogens and the ratio of functional monomers on the binding and recognition capacity of MIMs were investigated, and the morphology of the membranes was examined by scanning electron microscopy (SEM). The results showed that the MIMs have the highest selectivity to magnolol when the ratio of MAM/AA was 1:4 and tetrahydrofuran (THF) with dimethyl sulfoxide (DMSO) was used as the porogen. The morphology of the imprinted membranes after template extracting is much rougher with big cavities than that of the non‐imprinted membranes (NIMs) and the imprinted membranes before template extracting. The MIMs can selectively separate the magnolol.     

Dynamics of polymeric systems

Using dielectric and mechanical relaxation data of polymeric systems, an alternative formula is examined. The formula describes the experimental data with a high degree of accuracy, not received by the other model functions (Arrhenius and non-Arrhenius type) under investigation. The proposed formula gives the answer on questions concerning a supermolecular structure and the nature of the structural relaxation. New definition of the glass-transition temperature is proposed. It is shown how we should combine the results of different experimental methods to conduct an unambiguous analysis of polymeric systems.     

Selective extraction of clonazepam from human plasma and urine samples by molecularly imprinted polymeric beads

A molecularly imprinted polymer (MIP) based on free‐radical polymerization was prepared with 1‐(N,N‐biscarboxymethyl)amino‐3‐allylglycerol and N,N‐dimethylacrylamide as functional monomers, N,N‐methylene diacrylamide as the cross‐linker, copper ion‐clonazepam as the template and 2,2‐azobis(2‐methylbutyronitrile) as the initiator. The imprinted polymer was characterized by Fourier transform infrared spectroscopy, elemental analysis, thermogravimetric analysis, and SEM. The MIP of agglomerated microparticles with multipores was used for SPE. The imprinted polymer sorbent was selective for clonazepam. The optimum pH and sorption capacity were 5 and 0.18 mg/g at 20°C, respectively. The profile of the drug uptake by the sorbent reflects good accessibility of the active sites in the imprinted polymer sorbent. The MIP‐SPE was the most feasible technique for the extraction of clonazepam with a high recovery from human plasma and urine samples.     

Glass transition of heterogeneous polymeric systems studied by calorimetry

This personal review focuses on two aspects. First, glass transition dynamics and hence also calorimetry is connected to dynamic heterogeneity. This results in an interplay of the corresponding dynamic length scales and length scales from structural heterogeneities in polymeric samples. Second, the complexity of the dynamic glass transition itself results in different effects of this interplay for different experimental observables. Hence the comparison of results from calorimetry with other relaxation methods gives important clues to an understanding of the complex glass transition phenomenon.     

Molecular imprinted membrane based on molecular imprinted nanoparticles polymer for separation of polycyclic aromatic hydrocarbons

The phase inversion technique was used for synthesis anthracene molecularly imprinted membrane (An–MIM) by hybridizing anthracene molecularly imprinted nanoparticles polymer (An–MINP) with cellulose acetate (CA). An–MIM gives high binding capacities toward anthracene, naphthalene, pyrene, benzo(a)pyrene, phenanthrene, and acenaphthylene. Meanwhile, cellulose acetate membrane (CAM) and none imprinted membrane give very low binding capacities toward Anthracene, Naphthalene, Pyrene, Benzo(a)pyrene, Phenanthrene and Acenaphthylene. The separation properties of An–MIM, none imprinted membrane (NIM), and CAM were investigated in terms of selectivity, rejection percentages, and concentrating factor. The optimum operation time of An–MIM was found to be 3 hr. The overall results indicated that the presence of chemical binding sites in the An–MIM plays predominating role in the separation properties. Therefore, An–MIM proved to be highly efficient for the removal of polycyclic aromatic hydrocarbons at various percentages. Copyright © 2015 John Wiley & Sons, Ltd.     

Chiral separation by （S）-naproxen imprinted monolithic column with mixed functional monomers

Molecularly imprinted polymers (MIPs), using (S)-naproxen as template and the combination of butyl methacrylate (BMA) and MAA (1:1 molar ratio) as functional monomers were synthesized by an in situ polymerization reaction. The rendered monolithic column was evaluated in HPLC mode. The result showed that the monolithic MIPs with the combination of two monomers produced better chiral resolution of rac-naproxen (Rs=1.55) and column efficiencies of imprinted molecules (N=2860 plates/m)than that with pure MAA.     

Chiral separation of binaphthol enantiomers on molecularly imprinted polymer monolith by capillary electrochromatography.

A novel enantioseparational monolithic stationary phase for binaphthol based on a molecular imprinting method was introduced and evaluated in capillary electrochromatography (CEC). The monolithic stationary was prepared by the in situ copolymerization of methacrylic acid and ethylene glycol dimethacrylate in a porogenic solvent (toluene or toluene-isooctane) in the presence of an imprinting molecule, (R)-1,1'-bi-2,2'-naphthol. Such stationary phases could separate the enantiomers of binaphthol. The influence of several parameters on the column permeability was investigated. These parameters included the polymerization time, the molar ratio of the functional monomer to the imprinting molecule and the content of porogen. The influence of the polymerization condition and the electrochromatographic parameters on the enantiomer separation was also studied. Initial studies showed that a higher molecular ratio of the imprinted molecule to the functional monomer, a higher content of porogen, a higher content of acetonitrile, a higher pH, as well as the addition of Tween 20, gave a higher enantiomer selectivity.     

Selective separation of lambdacyhalothrin by porous/magnetic molecularly imprinted polymers prepared by Pickering emulsion polymerization

Porous/magnetic molecularly imprinted polymers (PM‐MIPs) were prepared by Pickering emulsion polymerization. The reaction was carried out in an oil/water emulsion using magnetic halloysite nanotubes as the stabilizer instead of a toxic surfactant. In the oil phase, the imprinting process was conducted by radical polymerization of functional and cross‐linked monomers, and porogen chloroform generated steam under the high reaction temperature, which resulted in some pores decorated with easily accessible molecular binding sites within the as‐made PM‐MIPs. The characterization demonstrated that the PM‐MIPs were porous and magnetic inorganic–polymer composite microparticles with magnetic sensitivity (M_s = 0.7448 emu/g), thermal stability (below 473 K) and magnetic stability (over the pH range of 2.0–8.0). The PM‐MIPs were used as a sorbent for the selective binding of lambdacyhalothrin (LC) and rapidly separated under an external magnetic field. The Freundlich isotherm model gave a good fit to the experimental data. The adsorption kinetics of the PM‐MIPs was well described by pseudo‐second‐order kinetics, indicating that the chemical process could be the rate‐limiting step in the adsorption of LC. The selective recognition experiments exhibited the outstanding selective adsorption effect of the PM‐MIPs for target LC. Moreover, the PM‐MIPs regeneration without significant loss in adsorption capacity was demonstrated by at least four repeated cycles.