Rapid detection of aflatoxin B1 on membrane by dot-immunogold filtration assay

Immunofiltration assay for mycotoxins in which nitrocellulose membrane (NCM) was used as a support and enzyme was used as the label has been developed since the late 1980s. As colloidal gold is a good labeling substance that can accelerate antibody-antigen reaction which result can be read directly by naked eyes, the colloidal gold particles could replace the enzyme to be labeled to antibody in aflatoxin B₁ (AFB₁) immunoassay. Dot-immunogold filtration assay (DIGFA) of AFB₁ on NCM was developed in this study. At first, the colloidal gold was synthesized and colloidal gold-monoclonal antibody (McAb) conjugates against AFB₁ were prepared at pH 7.0 of colloidal gold solution, 0.018 mg/mL of McAb. Then the colloidal gold-McAb conjugates were used to develop AFB₁ DIGFA, which detection time was only 15 min, six times less than that of ELISA. With this method to determine the standard AFB₁ solution, the results demonstrated a visual detection limit of approximately 2 ng/mL of AFB₁, which was similar to that of ELISA. This method had good specificities for AFG₁, AFG₂ and AFM₁ and a little cross-reactivity with AFB₂. 45 food samples collected from the markets were subjected to DIGFA and the results showed that one corn sample was positive and in agreement that of HPLC. It is suggested that DIGFA developed in current study has a potential use as a rapid and cost-effective screening tool for the determination of AFB₁ in foods in the field within 15 min without complicated steps.     

Highly sensitive electrochemical immunoassay for human IgG using double-encoded magnetic redox-active nanoparticles

A new sandwich-type electrochemical immunoassay was developed for the detection of human IgG using doubly-encoded and magnetic redox-active nanoparticles as recognition elements on the surface of a glassy carbon electrode modified with anti-IgG on nanogold particles. The recognition elements were synthesized by coating magnetic Fe₃O₄ nanoparticles with Prussian blue nanoparticles and then covered with peroxidase-labeled anti-IgG antibodies (POx-anti-IgG) on Prussian blue nanoparticles. The immunoelectrode displays very good electrochemical properties towards detection of IgG via using double-encoded magnetic redox-active nanoparticles as trace and hydrogen peroxide as enzyme substrate. Its limit of detection (10 pmol·L^?1) is 10-fold better than that of using plain POx-anti-IgG secondary antibodies. The method was applied to the detection of IgG in serum samples, and an excellent correspondence with the reference values was found.     

Development of a Lateral Flow Strip with a Positive Readout for the On-Site Detection of Aflatoxin B1

Aflatoxin B₁ is one of the contamination indicators for food safety monitoring. The rapid and effective assessment and determination of AFB₁ in food is of great importance to dietary safety. The lateral flow assay shows advantages in its simplicity, and rapidity, and provides a visual readout, while the available lateral flow assay for AFB₁ requires a competitive format that produces readings inversely proportional to the AFB₁ concentration, which is counterintuitive and may lead to a potential misinterpretation of the results. Herein, we developed a positive readout aptamer-based lateral flow strip (Apt-strip) for the detection of AFB₁. This Apt-strip relies on the competition between AFB₁ and fluorescein-labeled complementary DNA strands (FAM-cDNA) for affinity binding to limited aptamers against AFB₁ (AFB₁-Apt). In the absence of AFB₁, AFB₁-Apt hybridizes with FAM-cDNA. No signal at the T-line of the Apt-strip was observed. In contrast, AFB₁-Apt binds to AFB₁ in the sample, and then a part of the FAM-cDNA is hybridized with the free AFB₁-Apt, at which time the other unreacted FAM-cDNA is captured by A35-Apt on the T-line. The signal was observed. This method achieved fast detection of AFB₁ with a detection limit (DL) of 0.1 ng/mL, positive readout, and increased sensitivity.     

Novel Enzyme-Linked Aptamer Assay for the Determination of Aflatoxin B1 in Peanuts

Abstract

A novel enzyme-linked aptamer assay is reported for the determination of aflatoxin B₁ (AFB₁). AFB₁ can competitively bind with the immobilized biotin-aptamer and release biotin complementary DNA, leading to the gradual fading of the detection system color with increasing of AFB₁ concentration. In the absence of AFB₁, the biotinylated complementary DNA is not be released from the fixed aptamer. Therefore, the enzyme reaction occurs in the detection system. Under the optimized experimental conditions, the proposed method possessed a wide linear range for AFB₁ from 1 to 80?ng/mL (R² of 0.990) with a low detection limit of 0.36?ng/mL. The method was then applied to detect uncontaminated peanuts fortified with different concentrations of AFB₁. The recovery values were from 82.60% to 94.43%, which indicated the proposed method may be used to detect AFB₁ in food and has potential for the development of test kits.     

Carbon nanotube-based symbiotic coaxial nanocables with nanosilica and nanogold particles as labels for electrochemical immunoassay of carcinoembryonic antigen in biological fluids

A feasible and practicable amperometric immunoassay strategy for sensitive screening of carcinoembryonic antigen (CEA) in human serum was developed using carbon nanotube (CNT)-based symbiotic coaxial nanocables as labels. To construct such a nanocable, a thin layer of silica nanoparticles was coated on the CNT surface by sonication and sol-gel methods, and then colloidal gold nanoparticles were assembled on the amino-functionalized SiO₂/CNTs, which were used for the label of horseradish peroxidase-anti-CEA conjugates (HRP-anti-CEA-Au/SiO₂/CNT). In the presence of analyte CEA, the sandwich-type immunocomplex was formed on an anti-CEA/Au/thionine/Nafion-modified glassy carbon electrode by using HRP-anti-CEA-Au/SiO₂/CNTs as detection antibodies. To embody the advantages of the protocol, the analytical properties of variously modified electrodes were compared in detail on the basis of different nanolabels. Under optimal conditions, the cathodic peak currents of the electrochemical immunosensor were proportional to the logarithm of CEA concentration over the range from 0.01 to 12 ng mL⁻¹ in pH 5.5 HAc-NaAc containing 5 mM H₂O₂. At a signal-to-noise ratio of 3, the detection limit (LOD) is 5 pg mL⁻¹ CEA. Intra- and inter-assay coefficients of variation were below 9.5%. Meanwhile, the selectivity and stability of the immunosensor were acceptable. In addition, the technique was evaluated by spiking CEA standards in pH 7.4 PBS and with 35 clinical serum specimens, receiving excellent accordance with results from commercially available electrochemiluminescent enzyme-linked immunoassay.     

Nanosilver-doped DNA polyion complex membrane for electrochemical immunoassay of carcinoembryonic antigen using nanogold-labeled secondary antibodies

A simple and sensitive electrochemical immunoassay protocol was developed for the detection of carcinoembryonic antigen (CEA) using nanosilver-doped DNA polyion complex membrane (PIC) as sensing interface. To construct such an immunosensor, double-stranded DNA was initially assembled onto the surface of thionine/Nafion-modified screen-printed carbon electrode to adsorb silver ions with positive charges, then silver ions were reduced to nanosilver particles with the aid of NaBH₄, and then anti-CEA antibodies were immobilized on the nanosilver surface. Gold nanoparticles conjugated with horseradish peroxidase-labeled anti-CEA were employed as signal antibodies for the detection of CEA with a sandwich-type assay format. Under optimal conditions, the immunosensor exhibited a dynamic range of 0.03-32 ng mL⁻¹ with a low detection limit of 10 pg mL⁻¹ CEA. Intra- and inter-assay imprecision (CVs) were <9.5% and 6.5%, respectively. The response could remain 90.1% of the original current at 30th day. 50 real samples were evaluated using the immunosensor and the enzyme-linked immunosorbent assay, respectively, and received in accordance with those two methods.     

Electrochemical sensor for determination of aflatoxin B1 based on multiwalled carbon nanotubes-supported Au/Pt bimetallic nanoparticles

A sensitive and selective imprinted electrochemical sensor for the determination of aflatoxin B₁ (AFB₁) was constructed on a glassy carbon electrode by stepwise modification of functional multiwalled carbon nanotubes (MCNTs), Au/Pt bimetallic nanoparticles (Au/PtNPs), and a thin imprinted film. The fabrication of a homogeneous porous poly o-phenylenediamine (POPD)-grafted Au/Pt bimetallic multiwalled carbon nanotubes nanocomposite film was conducted by controllable electrodepositing technology. The sensitivity of the sensor was improved greatly because of the nanocomposite functional layer; the proposed sensor exhibited excellent selectivity toward AFB₁ owing to the porous molecular imprinted polymer (MIP) film. The surface morphologies of the modified electrodes were characterized using a scanning electron microscope. The performance of the imprinted sensor was investigated by cyclic voltammetry, differential pulse voltammetry, and electrochemical impedance spectroscopy in detail. A linear relationship between the sensor response signal and the logarithm of AFB₁ concentrations ranging from 1?×?10^?10 to 1?×?10^?5 mol L^?1 was obtained with a detection limit of 0.03 nmol L^?1. It was applied to detect AFB₁ in hogwash oil successfully.     

Dipstick based immunochemiluminescence biosensor for the analysis of vitamin B12 in energy drinks: A novel approach

In this article, we describe a dipstick based immunochemiluminescence (immuno-CL) biosensor for the detection of vitamin B₁₂ in energy drinks. The method is a direct competitive type format involving the immobilization of vitamin B₁₂ antibody on nitrocellulose membrane (NC) followed by treatment with vitamin B₁₂ and vitamin B₁₂–alkaline phosphatase conjugate to facilitate the competitive binding. The dipstick was further treated with substrate disodium 2-chloro-5-(4-methoxyspiro {1,2-dioxetane-3,2¢-(5¢-chloro)tricyclo[3.3.1.13,7]decan}-4-yl)-1-phenyl phosphate (CDP-Star) to generate chemiluminescence (CL). The number of photons generated was inversely proportional to the vitamin B₁₂ concentration. After systematic optimization, the limit of detection was 1 ng mL⁻¹. The coefficient of variation was below 0.2% for both intra- and inter-assay precision. Vitamin B₁₂ was extracted from energy drinks with recovery ranged from 90 to 99.4%. Two different energy drinks samples were analyzed, and a good correlation was observed when the data were compared with a reference enzyme linked immuno sorbent assay (ELISA) method. The developed method is suitable for an accurate, sensitive, and high-throughput screening of vitamin B₁₂ in energy drinks samples. The dipstick technique based on immuno-CL is suitable for the detection of several analyte in food and environmental samples.     

Non-enzymatic hydrogen peroxide sensor based on a nanoporous gold electrode modified with platinum nanoparticles

A novel non-enzymatic electrochemical sensor based on a nanoporous gold electrode modified with platinum nanoparticles was constructed for the determination of hydrogen peroxide (H₂O₂). Platinum nanoparticles exhibit good electrocatalytic activity towards hydrogen peroxide. The nanoporous gold (NPG) increases the effective surface area and has the capacity to promote electron-transfer reactions. With electrodeposition of Pt nanoparticles (NPs) on the surface of the nanoporous gold, the modified Au electrode afforded a fast, sensitive and selective electrochemical method for the determination of H₂O₂. The linear range for the detection of H₂O₂ was from 1.0 × 10^?7 M to 2.0 × 10^?5 M while the calculated limit of detection was 7.2 × 10^?8 M on the basis of the 3σ/slope (σ represents the standard deviation of the blank samples). These findings could lead to the widespread use of electrochemical sensors to detect H₂O₂.     

Magnetic beads-based multicolor colorimetric immunoassay for ultrasensitive detection of aflatoxin B1

Aflatoxin B₁ (AFB₁) is one of the most toxic, mutagenic and carcinogenic mycotoxin, widely exists in contaminated food, grains and feedstuff products. In this study, a novel magnetic beads multicolor colorimetric immunoassay (MBMCIA) based on Au@Ag nanorods (Au@Ag NRs) is proposed to visual detect ultralow concentration of AFB₁ with high-resolution by the naked-eye. To design the MBMCIA system, AFB₁-BSA conjugates were first coated on the surface of magnetic beads (MBs), then alkaline phosphatase (ALP) as a bridge between immunoassay and color reaction was used for catalytic hydrolysis of ascorbic acid-phosphate to generate reductive ascorbic acid. Finally, the yielded ascorbic acid could reduce silver ions to grow a silver coating on the surface of gold nanorods to generate Au@Ag NRs, which leads to the bule-shifted longitudinal absorption peak of Au NRs, accompanying with a series of perceptible color change. Under the optimal conditions, the proposed MBMCIA exhibited good sensitivity and specificity for the detection of AFB₁ with the detection limit as low as 5.7 pg/mL. Meanwhile, the MBMCIA was also applied for the analysis of AFB₁ in spiked wheat samples, the obtained recoveries range from 99.1% to 104.3% with relative standard deviation (RSD) less than 7.05% were acceptable. The proposed MBMCIA integrates separated, enriched, anti-interference and signal read-out into one, which opens up a new avenue for an on-site visual food safety inspection or environmental monitoring.     

Filtration-based tyramide amplification technique—a new simple approach for rapid detection of aflatoxin B<Subscript>1</Subscript>

The catalyzed reporter deposition (CARD) method of signal amplification, also called “tyramide signal amplification”, has been used in immunoassays not only to increase sensitivity but also to reduce assay time. The current approach to tyramide amplification in immunoassays involves slow incubation with agitation. In this paper we describe new filtration-based tyramide amplification and substrate visualization techniques. Compared with the standard method, this new approach greatly enhances spot intensities in membrane immunoassay and reduces biotinylated tyramide (B-T) and substrate consumption approximately fiftyfold, without loss of specificity. An improved test device and a cost-effective method for preparation of membranes for Super-CARD amplification have also been developed. The techniques have been used for rapid detection of aflatoxin B₁ (AFB₁) in a variety of foodstuffs with a detection limit of 12.5 μg kg⁻¹. The assay procedure involves sequential addition of standards or sample, AFB₁–horseradish peroxidase (HRP) conjugate, B-T, avidin–HRP, and substrate solution over anti-AFB₁ antibody-spotted zones of the membrane surface. The method saves time, improves reproducibility, eliminates many washing steps and avoids manipulation of the membranes between the different steps, while maintaining the sensitivity of the standard method. Average recoveries from different non-infected food samples spiked with AFB₁ at concentrations from 25 to 100 mg kg⁻¹ were between 95 and 105%. AFB₁ results obtained on different days for Aspergillus parasiticus infection of corn and groundnut samples correlated well with estimates obtained by HPLC. Figure The principle of filtration-based tyramide filtration technique     

Potentiometric competitive immunoassay for determination of aflatoxin B<Subscript>1</Subscript> in food by using antibody-labeled gold nanoparticles

The authors report on a competitive potentiometric immunoassay for aflatoxin B₁ (AFB₁) in food that displays distinctly improved sensitivity. Gold nanoparticles (AuNPs; 16 nm i. d.) were functionalized with polyclonal anti-AFB₁ antibody (pAb), whilst the sensor electrode was prepared by immobilizing AFB₁-bovine serum albumin conjugate (AFB₁-BSA) on a glassy carbon electrode. Upon addition of target AFB₁, competitive immunobinding occurs between the analyte and AFB₁-BSA for the labeled pAb on the AuNPs. The change in the surface charge as a result of the antigen-antibody reaction causes a shift in the electrical potential. With increasing concentrations of analyte (AFB₁), the quantity of pAb-AuNP captured by the electrode decreases. The shift in the output potential is linearly proportional to the logarithm of AFB₁ concentration in the 0.1 to 5.0 μg?·?kg^?1 range, with a detection limit (LOD) of 87 ng?·?kg^?1 (87 ppt). An intermediate precision of 10.9 % was accomplished in batch-to-batch identification. The selectivity over AFB₂ with similar chemical structure is acceptable. The method accuracy was evaluated by analyzing naturally contaminated and spiked peanut samples, giving consistent results (with RSD values of <12 %) between this immunoassay and the commercial ELISA.

Open image in new window

Graphical Abstract A potentiometric immunosensor was designed for detection of AFB₁ by using nanogold-labeled antibodies as the signal-amplification tags.

     

Direct competitive ELISA based on a monoclonal antibody for detection of aflatoxin B1. Stabilization of ELISA kit components and application to grain samples

A direct competitive enzyme-linked immunosorbent assay (ELISA) based on a monoclonal antibody has been developed and optimized for detection of aflatoxin B₁ (AFB₁), and an ELISA kit has been designed. This immunoassay was highly specific, sensitive, rapid, simple, and suitable for aflatoxin monitoring. AFB₁ concentrations determinable by ELISA ranged from 0.1 to 10 μg L⁻¹. The IC₅₀ value was 0.62 μg L⁻¹. Recovery from spiked rice samples averaged between 94 and 113%. The effect of different reagents on the stability of HRP–AFB₁ conjugate solution was studied. The performance of a stabilized enzyme tracer in ELISA was determined and compared with that of a freshly prepared control solution of HRP–AFB₁ conjugate. The results showed that stabilizing media containing 0.02% BSA, 0.1% Kathon CG, and 0.05 mol L⁻¹ calcium chloride in 0.05 mol L⁻¹ Tris-HCl buffer (pH 7.2) maintained the activity of HRP–AFB₁ at a dilution of 1:1000 for a period of at least 12 months at room temperature whereas the reference conjugate solution without the additives lost its activity within a few days. Several additives were tested for their stabilizing effect on a monoclonal antibody (MAb) immobilized on the surface of polystyrene microtitre plates. It was shown that immobilized MAb, treated with post-coating solutions containing PVA, BSA, and combinations of these substances with trehalose, retained its activity for at least 4 months at 4°C, whereas the untreated MAb-coated plate lost its activity within 2 days.     

Limitations in the use of horseradish peroxidase as an enyzme probe in the development of a homogeneous immunoassay for aflatoxin B1

Horseradish peroxidase (HRPO) was used as a probe to quantitate aflatoxin B₁ by a homogeneous immunoassay. The conjugation of AFB₁ to HRPO resulted in 54% loss of enyzme activity. In the presence of AFB₁ specific antibodies, the HRPO-AFB₁ conjugate showed reversal of its lost enzyme activity by 12%. This positive modulatory effect of antibody on the enzyme activity was used as an analytical tool to quantitate AFB₁. The homogeneous assay carried out with free AFB₁ and HRPO-AFB₁ conjugate in the presence of antibodies indicated poor linearity as compared to the heterogeneous assay. It was observed that the number of HRPO-lysine residues involved in AFB₁ conjugation were 6–8. The low level of modulation of enzyme activity by antibody with respect to HRPO-AFB₁ conjugate, could possibly be attributed to the limited number of lysine residues in the HRPO molecule and its proximity to the active site of the enzyme. Thus, HRPO was found to be limiting as an enzyme with respect to the homogeneous enzyme immunoassay for AFB₁ analysis. The antibodies raised were specific for AFB₁, and showed excellent linearity even at high dilution for the detection of AFB₁ by ELISA indicating that antibodies per se were not the limiting factor.     

An electrochemical biosensor for α-fetoprotein based on carbon paste electrode constructed of room temperature ionic liquid and gold nanoparticles

A novel and effective electrochemical immunosensor for the rapid determination of α-fetoprotein (AFP) based on carbon paste electrode (CPE) consisting of room temperature ionic liquid (RTIL) N-butylpyridinium hexafluorophosphate (BPPF₆) and graphite. The surface of the CPE was modified with gold nanoparticles for the immobilization of the α-fetoprotein antibody (anti-AFP). By sandwiching the antigen between anti-AFP on the CPE modified with gold nanoparticles and the secondary antibody, polyclonal anti-human-AFP labeled with horseradish peroxidase (HRP-labeled anti-AFP), the immunoassay was established. The concentration of AFP was determined based on differential pulse voltammetry (DPV) signal, which was generated in the reaction between O-aminophenol (OAP) and H₂O₂ catalyzed by HRP labeled on the sandwich immunosensor. AFP concentration could be measured in a linear range of 0.50-80.00 ng mL⁻¹ with a detection limit of 0.25 ng mL⁻¹. The immunosensor exhibited high sensitivity and good stability, and would be valuable for clinical assay of AFP.     

Separation and detection of multiple pathogens in a food matrix by magnetic SERS nanoprobes

A rapid and sensitive method was developed here for separation and detection of multiple pathogens in food matrix by magnetic surface-enhanced Raman scattering (SERS) nanoprobes. Silica-coated magnetic probes (MNPs@SiO₂) of ∼100 nm in diameter were first prepared via the reverse microemulsion method using cetyltrimethylammonium bromide as a surfactant and tetraethyl orthosilicate as the silica precursor. The as-prepared MNPs@SiO₂ were functionalized with specific pathogen antibodies to first capture threat agents directly from a food matrix followed by detection using an optical approach enabled by SERS. In this scheme, pathogens were first immuno-magnetically captured with MNPs@SiO₂, and pathogen-specific SERS probes (gold nanoparticles integrated with a Raman reporter) were functionalized with corresponding antibodies to allow the formation of a sandwich assay to complete the sensor module for the detection of multiple pathogens in selected food matrices, just changing the kinds of Raman reporters on SERS probes. Here, up to two key pathogens, Salmonella enterica serovar Typhimurium and Staphylococcus aureus, were selected as a model to illustrate the probability of this scheme for multiple pathogens detection. The lowest cell concentration detected in spinach solution was 10³ CFU/mL. A blind test conducted in peanut butter validated the limit of detection as 10³ CFU/mL with high specificity, demonstrating the potential of this approach in complex matrices.     

Limitations in the use of horseradish peroxidase as an enyzme probe in the development of a homogeneous immunoassay for aflatoxin B1

Horseradish peroxidase (HRPO) was used as a probe to quantitate aflatoxin B₁ by a homogeneous immunoassay. The conjugation of AFB₁ to HRPO resulted in 54% loss of enyzme activity. In the presence of AFB₁ specific antibodies, the HRPO-AFB₁ conjugate showed reversal of its lost enzyme activity by 12%. This positive modulatory effect of antibody on the enzyme activity was used as an analytical tool to quantitate AFB₁. The homogeneous assay carried out with free AFB₁ and HRPO-AFB₁ conjugate in the presence of antibodies indicated poor linearity as compared to the heterogeneous assay. It was observed that the number of HRPO-lysine residues involved in AFB₁ conjugation were 6–8. The low level of modulation of enzyme activity by antibody with respect to HRPO-AFB₁ conjugate, could possibly be attributed to the limited number of lysine residues in the HRPO molecule and its proximity to the active site of the enzyme. Thus, HRPO was found to be limiting as an enzyme with respect to the homogeneous enzyme immunoassay for AFB₁ analysis. The antibodies raised were specific for AFB₁, and showed excellent linearity even at high dilution for the detection of AFB₁ by ELISA indicating that antibodies per se were not the limiting factor.     

A sensitive and semi-quantitative method for determination of multi-drug residues in animal body fluids using multiplex dipstick immunoassay

The objective of this research was to develop a multiplex dipstick immunoassay method for the simultaneous determination of multi-veterinary drug residues, such as β-agonists, sulfonamides, and tetracyclines in milk, urine, and serum. The multiplex dipstick assay format was based on an indirect competitive approach: Three test lines (different antigens) and one control line (goat anti-mouse IgG) were located on the strip membrane. Labeled antibodies were freeze-dried in microwells. Samples did not require pretreatment and could be directly analyzed within 10 min. Threshold levels in different sample matrices were visually estimated at 0.3–0.45 ng mL⁻¹ for clenbuterol; 3–4 ng mL⁻¹ for sulfadiazine; and 4.5–6 ng mL⁻¹ for tetracycline, respectively. The linear relationship between the concentrations of veterinary drug residues and the Au nanoparticles plasmon absorbance allowed quantitative determination of these veterinary drug residues. The recoveries of clenbuterol, sulfadiazine and tetracycline in spiked samples ranged from 78.4% to 112.6%, and the relative standard deviations were below 11.2%. Analysis of animal samples suggested that the proposed multiplex dipstick assay method was consistent with the LC-MS/MS method. The percentage of false results was less than or equal to 5%. Thus, the proposed multiplex dipstick assay is inexpensive, easy-to-use, and suitable for the purposes of rapid and comprehensive screening of 3 families of β-agonists, sulfonamides and tetracyclines including 26 drugs in animal body fluids.     

Nanoparticle-based immunosensors and immunoassays for aflatoxins

Aflatoxins are naturally existing mycotoxins produced mainly by Aspergillus flavus and Aspergillus parasiticus, present in a wide range of food and feed products. Because of their extremely high toxicity and carcinogenicity, strict control of maximum residue levels of aflatoxins in foodstuff is set by many countries. In daily routine, different chromatographic methods are used almost exclusively. As supplement, in several companies enzyme immunoassay-based sample testing as primary screening is performed. Recently, nanomaterials such as noble metal nanoparticles, magnetic particles, carbon nanomaterials, quantum dots, and silica nanomaterials are increasingly utilized for aflatoxin determination to improve the sensitivity and simplify the detection. They are employed either as supports for the immobilization of biomolecules or as electroactive or optical labels for signal transduction and amplification. Several nanoparticle-based electrochemical, piezoelectric, optical, and immunodipstick assays for aflatoxins have been developed. In this review, we summarize these recent advances and illustrate novel concepts and promising applications in the field of food safety.     

Label-free colorimetric detection of picomolar amounts of hydrazine using a gold nanoparticle-based assay

We report the development of a simple and rapid colorimetric detection method for hydrazine in boiler feed water using label-free aggregation-based gold nanoparticles as probe. This assay relies upon the distance-dependent optical properties of gold nanoparticles. Hydrazine could rapidly induce the aggregation of gold nanoparticles, thereby resulting in visual color change from red to blue (or purple). The concentration of hydrazine can be determined by the naked eye or by a UV–vis spectrometer. Calibration curve was linear ranging from 1.0 × 10^?11 to 1.0 × 10^?7 M of hydrazine. The present limit of detection for hydrazine was 1.0 × 10^?12 M. The method is rather simple, and the whole process including sample pretreatment takes only 15 min at room temperature. The merits (such as simplicity, rapidity, low cost and visual colorimetry) make the proposed method especially useful for on-site screening of hydrazine levels well in boiler feed water.