Zn-MOFs催化合成聚丁二酸乙二醇酯和碳酸二甲酯的研究

采用溶剂热法和直接混合法合成了3种金属有机骨架材料(Zn-MOFs),研究了其在碳酸乙烯酯(EC)与丁二酸二甲酯(DMSu)耦合反应制聚丁二酸乙二醇酯(PES)和碳酸二甲酯(DMC)反应中的催化性能,并对工艺条件进行了考察.采用X射线粉末衍射法(XRD),扫描电子显微镜(SEM),傅里叶转化红外光谱法(FTIR)和原子发射光谱法(ICP-AES)对Zn-MOFs进行了表征,对聚合物PES进行了FTIR和核磁共振(~1HNMR和~(13)C-NMR)测试.结果表明,既具有MOF-5结构,又含有较多Zn O的纳米Zn-MOF-L催化活性最好.在Zn-MOF-L催化下,最优反应条件如下:预缩聚反应温度215℃,预缩聚反应时间4 h,缩聚反应温度220℃,缩聚压力小于300 Pa,n(EC)/n(DMSu)=2,催化剂用量为1 wt%.最优反应条件下,DMC的收率可达到65.08%,PES的特性黏数[η]可达到0.572 d L/g,数均相对分子质量M_n为2.1×104,相对分子质量分布PDI为2.21.     

聚丁二酸乙二醇酯的合成

以十氢萘为溶剂,丁二酸和乙二醇直接聚合,合成了高相对分子质量的聚丁二酸乙二醇酯(PES),其结构经1H NMR和IR表征。考察了单体比例对聚合反应的影响,结果表明,当n(乙二醇)∶n(丁二酸)=1.01∶1.00时,合成的PES数均相对分子质量最高(48 640),产率93%。同时测定了PES的力学性能和热性能。     

氨基磺酸催化合成丁二酸二丁酯

研究了氨基磺酸代替硫酸作为酯催化剂,由丁二酸与正丁醇合成丁二酸二丁酯的反应,考察了反应的影响因素及氨基磺酸的重复使用性能。丁二酸3．0g(250mmol),n(丁二酸)：n(正丁醇)：n(氨基磺酸)=1．00：8．00：0．31,回流分水60min,酯收率97．4％。另外,还催化合成了癸二酸二丁酯、己二酸二丁酯和马来酸二丁酯。     

聚离子液体催化碳酸乙烯酯与甲醇的酯交换反应

通过N-乙烯基咪唑鎓离子液体、 丙烯酸钠(NaAA)和交联剂二乙烯基苯(DVB)或1-乙烯基-3-三乙二醇基咪唑溴盐{[(EG)₃-DVIm]Br₂)}自由基聚合合成了一系列含羧酸根的聚离子液体. 将所合成的聚离子液体用于催化甲醇与碳酸乙烯酯(EC)酯交换反应制备碳酸二甲酯(DMC). 研究结果表明, 在甲醇和EC混合溶剂中具有最大溶胀度的聚离子液体催化剂poly[VOIm-AA-DVIm]活性最高. 在优化反应条件[120 ℃, 6 h, 1.0%(摩尔分数)催化剂用量, n(甲醇)/n(EC)=10∶1]下, DMC收率为76.6%, 选择性为90.1%, 达到了与均相催化剂1-丁基-3-甲基咪唑醋酸盐([BMIm]OAc)相当的活性.     

不同催化剂上碳酸乙烯酯与对苯二甲酸二甲酯的酯交换反应

 将碳酸乙烯酯与甲醇酯交换合成碳酸二甲酯的反应和乙二醇与对苯二甲酸二甲酯酯交换合成聚对苯二甲酸乙二醇酯(PET)的反应偶合,建立了同时合成碳酸二甲酯和PET的新方法. 探索了有机锡、钛酸酯、乙酸盐和金属氧化物等不同催化剂对合成碳酸二甲酯和PET的影响. 二丁基氧化锡的催化效果最佳,其碳酸二甲酯的收率达68.4%.     

硫酸氢钠催化合成异丁酸异丁酯

采用硫酸氢钠为催化剂催化异丁酸与异丁醇的酯化反应,合成了异丁酸异丁酯;考察了催化剂用量、n(异丁醇)∶n(异丁酸)、反应时间、带水剂种类和用量,以及硫酸氢钠重复利用等因素对酯收率的影响.结果表明,硫酸氢钠催化活性高,易分离回收,后处理方便,废液排放量少.适宜的反应条件为n(异丁醇)∶n(异丁酸)=2.5∶1(0.2mol异丁酸),硫酸氢钠1.5g,反应时间40min,环己烷5mL;相应的酯收率为91.9%.     

有机钛化合物催化碳酸二甲酯与乙酸苯酯合成碳酸二苯酯

对比测定了几种有机钛化合物对碳酸二甲酯(DMC)与乙酸苯酯(PA)酯交换合成碳酸二苯酯(DPC)反应的催化性能. 结果表明,乙酰丙酮氧钛(TiO(acac)2)是一种有效的酯交换用催化剂,具有良好的催化性能. 在优化的条件(n(PA)=0.8 mol, n(DMC)/n(PA)=1/2, n(TiO(acac)2)/n(PA)=0.006, θ=180 ℃, t=4 h)下, DMC转化率可达74.9%, DPC和甲基苯基碳酸酯(MPC)的选择性分别可达38.9%和56.9%.     

碱性离子液体催化合成碳酸甲乙酯

以碱性离子液体为催化剂,对碳酸二甲酯(DMC)和碳酸二乙酯(DEC)酯交换反应合成碳酸甲乙酯进行了研究.筛选出高催化活性的碱性离子液体1-丁基-3甲基咪唑丁酸盐([C4mim][CH3(CH2)2COO])为催化剂,详细考察了反应时间、温度、催化剂用量、原料配比等因素对酯交换反应的影响.实验结果表明,在反应温度为90℃,催化剂用量为6%(占反应物总质量百分数),n(DMC)∶n(DEC)=1.5∶1,反应时间为5h时,DEC的转化率高达48%.[C4mim][CH3(CH2)2COO]重复利用5次后仍保持较高的催化活性.     

KNO3/AlSBA-15分子筛催化合成碳酸二丙酯的研究

研究了KNO3/AlSBA-15负载型分子筛催化剂用于碳酸二甲酯(DMC)与丙醇的酯交换合成碳酸二丙酯(DPC)反应.分别考察了载体的制备方法,活性组分的负载量,催化剂的活化温度及反应时间等因素对催化活性的影响,研究表明该催化剂对于这一反应具有较高的催化活性.当摩尔比DMC∶丙醇=1∶4,催化剂用量为反应物总质量的3%,反应温度为90℃,反应时间为6h时,DPC的选择性为96.0%,收率为90.2%.     

负载PbO催化剂对苯胺与碳酸二甲酯合成苯氨基甲酸甲酯的催化性能

 考察了几种负载PbO催化剂对苯胺(An)与碳酸二甲酯(DMC)反应合成苯氨基甲酸甲酯(MPC)的催化性能. 结果表明, PbO/SiO2对该反应表现出很高的催化活性. 当w(PbO)=3.6%, n(PbO)/n(An)=1%, n(DMC)/n(An)=5, θ=160 ℃和t=4 h时, MPC收率达到99.5%. PbO/SiO2容易从反应体系中分离,且可重复使用5次,催化活性基本保持不变,使用寿命较长.     

Transesterification of Ethylene Carbonate with Dimethyl Terephthalate over Various Metal Acetate Catalysts

IntroductionDimethyl carbonate(DMC) is known to be a novelbuilding block in organic synthesis. As an environmen-tally benign compound and a unique intermediate,DMC has attracted much attention[1,2]. Among the va-rious methods for synthesizing DMC, the tra…     

Synthesis of dimethyl carbonate (dmc) from co2, ethylene oxide and methanol using heterogeneous anion exchange resins as catalysts

Summary A two-step synthesis of dimethyl carbonate (DMC) from ethylene oxide (EO), carbon dioxide and methanol using heterogeneous anion exchange resins as catalysts is reported. The first step is the reaction of EO with CO₂ to form ethylene carbonate (EC), and the second one the transesterification of EC with methanol to yield DMC. Effect of various reaction parameters on the activity and selectivity of the catalysts used was investigated. After the first step, the crude mixture containing EC was directly reacted with methanol in the presence of a heterogeneous anion exchange resin catalyst to produce DMC in high yield and selectivity. Our process is highly economic.     

Zn-La复合氧化物催化剂用于甲醇与碳酸乙烯酯酯交换反应的研究

ZnO、La₂O₃和Zn-La复合氧化物催化剂用于甲醇与碳酸乙烯酯反应制备碳酸二甲酯和乙二醇。催化剂采用共沉淀法进行制备,并用BET、XRD、TG-DSC、CO₂-TPD和Hammett滴定等对催化剂进行表征。考察了Zn-La物质的量比、焙烧温度,反应条件（反应温度、反应时间、催化剂用量等）对催化剂活性的影响。结果表明,ZnLa复合氧化物物质的量比为2：1,焙烧温度为500℃时,催化剂表现了较好的催化效果。催化剂的活性与催化剂表面的碱性强度和碱量有关,碱量越多催化剂的活性越好。     

Studies on the Simultaneous Synthesis of Dimethyl Carbonate and Poly（ethylene terephthalate）： I. Catalytic Activity of Metal Acetate in Transesterification of Ethylene Carbonate with Dimethyl Terephthalate

Dimethyl carbonate (DMC) is a new building block of organic synthesis, as an environmentally benign compound and unique intermediate, it has been attracted much attention. Among the various methods for synthesizing DMC, transesterification of ethylene car…     

Dimethyl carbonate synthesis catalyzed by DABCO-derived basic ionic liquids via transesterification of ethylene carbonate with methanol

Easily prepared DABCO-derived (1,4-diazobicyclo[2.2.2]octane) basic ionic liquids were developed for an efficient synthesis of dimethyl carbonate (DMC) via the transesterification of ethylene carbonate (EC) with methanol. 1-Butyl-4-azo-1-azoniabicyclo[2.2.2]octane hydroxide ([C₄DABCO]OH) exhibited high catalytic activity and 81% DMC yield together with 90% EC conversion was obtained under mild reaction conditions. Notably, the catalyst could be recycled for four times without loss of catalytic activity. Moreover, a possible mechanism was also discussed.     

Mg-Al-O-t-Bu hydrotalcite as an efficient catalyst for the transesterification of dimethyl carbonate with ethanol

Mg-Al-O-t-Bu hydrotalcite was synthesized and characterized by XRD, FT-IR and TGA-DTA. It was proved to be an active heterogeneous catalyst for the transesterification of dimethyl carbonate (DMC) with ethanol. When the reaction was carried out over Mg-Al-O-t-Bu hydrotalcite at 80°C, 7 h, molar ratio of ethanol to DMC 5:1, 1.0 wt.% of catalyst, the conversion of DMC was 86.4%, the selectivity to diethyl carbonate (DEC) was 61.2%. This heterogeneous catalyst could be used 5 times without loss of its activity.     

碳酸二甲酯与苯酚酯交换合成碳酸二苯酯的热力学性质及均相催化剂

在298.15K,101.325kPa条件下,液态碳酸二甲酯(DMC)的标准Gibbs自由能和熵分别估算为-472.3kJ*mol-1和245.2J*mol-1*K-1.在298K～523K计算了由DMC和苯酚生成碳酸二苯酯(DPC)和苯甲醚反应的热力学性质(ΔrH0m,ΔrS0m,ΔrG0m和平衡常数).计算出的热力学性质表明,DMC和苯酚酯交换合成DPC反应是吸热的,并且在热力学上是不利的.研究了n-Bu2SnO, Ti(OC4H9)4, AlCl3和ZnCl2四种酯交换法合成DPC反应的催化剂,其中n-Bu2SnO具有最高的催化活性.热力学计算和实验结果均表明,合成DPC反应的最佳温度为453K.当以n-Bu2SnO为催化剂,n(苯酚)∶n(DMC)＝4∶1时,DPC的产率和选择性分别为43.0%和88.7%.     

KNO3/MCM-48催化酯交换法合成碳酸二丙酯

 对KNO3/MCM-48用于丙醇和碳酸二甲酯进行酯交换合成碳酸二丙酯的催化性能进行了考察. 用X射线衍射(XRD)、红外光谱(IR)和X射线荧光法研究了催化剂的结构特征和表面性质. XRD结果表明,随着K负载量的增加,载体特征峰强度逐渐减弱,但仍保留MCM-48的晶体结构. 随着焙烧温度的升高, KNO3逐渐分解成K2O. 分别考察了活性组分负载量、焙烧温度、焙烧时间和催化剂的用量以及反应时间对反应的影响. 结果表明, KNO3/MCM-48催化剂对碳酸二丙酯的合成具有很高的催化活性. 在反应温度363 K, 反应时间6 h, 催化剂用量5%, 丙醇与碳酸二甲酯摩尔比为4的条件下,碳酸二甲酯的转化率可达99.9%, 产物碳酸二丙酯选择性93.4%, 产率93.3%.     

Transesterification of dimethyl carbonate with phenol over a bimetallic molybdenum and copper catalyst

Mo-Cu bimetallic oxides were found to be efficient heterogeneous catalysts for the transesterification of dimethyl carbonate (DMC) with phenol. When the reaction was carried out between 150 and 180°C, with a molar of Mo/Cu of 1:1, molar ratio of phenol/DMC of 1:1, 4.8 wt.% of the catalyst, 9 h, the conversion of phenol was 49.9%, and the total yield of MPC and DPC was 45.4%. Catalyst reuse showed a gradual decline in the catalytic activity. The decrease in catalytic activity might be due to leaching out of Mo and Cu, and/or carbon deposition.