A facile and controllable one-pot synthesis approach to amino-functionalized hollow silica nanoparticles with accessible ordered mesoporous shells

The development of a practical synthetic method to functionalize hollow mesoporous silica with organic groups is of current intere st for selective adsorption and ene rgy storage applications.Herein,a facile and controllable one-pot approach for the synthesis of monodisperse amino-functionalized hollow mesoporous silica nanoparticles is presented.A novel solid-to-hollow structural transformation procedure of the silica nanoparticles is presented.The structural transformation is easily designed,as obse rved through transmission electro n microscopy,by tailo ring the HCl and N-lauroylsarcosine sodium molar ratio and the water content in the sol-gel.Ordered and radially oriented in situ aminofunctionalized mesochannels were successfully introduced into the shells of the hollow silica nanoparticles.A formation mechanism for the hollow mesoporous silica materials is discussed.     

Uniform hierarchical silica film with perpendicular macroporous channels and accessible ordered mesopores for biomolecule separation

Herein, we demonstrate that silica films with perpendicular macroporous channels and accessible ordered mesopores can be conveniently prepared. The hierarchical macroporous–mesoporous silica films are synthesized by using zinc oxide nanorod array as macroporous template and CTAB surfactant as mesoporous template. In basic surfactant-containing solution, ordered mesoporous silica shells homogeneously grow on the zinc oxide nanorod array. The growth of the mesostructures do not require any chemical modification for the zinc oxide nanorod, which opens a new way for preparing hierarchical silica films with perpendicular mesochannels. The prepared hierarchical macroporous–mesoporous silica films possess a uniform thickness of 2 mm, large perpendicular macropores with a length of 1.8 mm and a width of 80 nm, and accessible ordered mesopores. Separation experiment demonstrates that this macroporous–mesoporous film can effectively separate biomolecules with different sizes.     

Facile method to synthesize platelet SBA-15 silica with highly ordered large mesopores

Highly ordered mesoporous SBA-15 silica with large pore diameter of 18 nm (nominal BJH pore diameter ~22 nm) and short pore length (~500 nm) was synthesized using a micelle expander 1,3,5-triisopropylbenzene in the absence of ammonium fluoride by employing short initial stirring time at 17 °C followed by static aging at low temperature. Scanning and transmission electron microscopies revealed that the material comprised of platelet particles in which large mesopores were nearly flawlessly arranged within uniform domains up to 3 μm in size. The platelet SBA-15 had the (100) interplanar spacing of 17 nm, high surface area (~470 m(2) g(-1)) and large pore volume (~1.6 cm(3) g(-1)). The hydrothermal treatment at 130 °C for 2 days was employed to eliminate constrictions from the pore channels. The control experiment showed that a sample prepared with prolonged stirring had very similar mesoporous properties, but the particle size was smaller and the domains were irregular, proving that the static conditions facilitate the formation of SBA-15 with platelet particle morphology. The absence of ammonium fluoride was also critical in attaining the platelet particle shape.     

Anionic surfactant-templated mesoporous silica (AMS) nano-spheres with radially oriented mesopores

Mesoporous silica nano-spheres with pore size larger than 3 nm were synthesized using an anionic surfactant as the template. These nano-spheres possess centrosymmetric radial mesopores (emanating from the spherical center to the exterior surface) and form stable suspension. The spherical size and mesostructure can be finely tuned by changing the pH value of the synthetic system in the range of 8.8 to 6.4. In addition, when the pH value was decreased to 5.8, instead of spheres, anisotropic morphologies such as elliptical, peanutlike and trifurcate particles were obtained, exhibiting core/shell structure due to the different orientations of the mesopores in the core and the shell of the particles. It is proposed that the evolution of the morphologies and mesostructures of the products templated by anionic surfactants strongly depend on the pH value of the synthetic system.     

Synthesis of freestanding silica and titania-silica aerogels with ordered and disordered mesopores

Freestanding blocks of silica and titania-silica aerogels were prepared by the sol-gel method. It is possible to prepare crack-free, titania-silica aerogels with high titanium content by a careful control of the synthesis conditions. Prehydrolysis, complexation and polymer addition were used to adjust the hydrolysis and condensation rates of the silicon and titanium alkoxide precursors. Photoactive anatase TiO₂ nanocrystals with a large surface area (i.e., up to 300m²g⁻¹) were crystallized from the gel network by the high-temperature ethanol supercritical drying, and the resulting aerogel blocks were gas permeable and display a transition-regime diffusion behavior. Pore and volume shrinkages were observed in samples prepared by ethanol supercritical drying when the titanium content was increased resulting in a lower flux. Adding Pluronic P123 creates ordered mesopore domains and produces large pore aerogels even at high titanium contents. The photocatalytic oxidation reaction of trichloroethylene was performed by flowing the reactant gas mixture through the UV-irradiated aerogel blocks with excellent results.     

A general one-pot process leading to highly functionalised ordered mesoporous silica films

Various organic moieties are homogeneously introduced in high quantities into mesostructured porous silica films through a general co-condensation process, which influences the self-assembly mechanism, depending on the physico-chemical properties of each function.     

Metamorphosis of ordered mesopores to micropores: periodic silica with unprecedented loading of pendant reactive organic groups transforms to periodic microporous silica with tailorable pore size

Ordered porous silicas with unprecedented loadings of pendant vinyl groups have been synthesized via co-condensation of tetraethyl orthosilicate (TEOS) and triethoxyvinylsilane (TEVS) under basic conditions in the presence of cetyltrimethylammonium surfactant. The resulting organosilicate-surfactant composites exhibited at least one low-angle X-ray diffraction (XRD) peak up to the TEVS:TEOS molar ratio of 7:3 (70% TEVS loading) in the synthesis gel. The surfactant was removed from these composites without any structural collapse. Nitrogen adsorption provided strong evidence of the presence of uniformly sized pores and the lack of phase separation up to TEVS:TEOS ratios as high as 13:7 (65% TEVS loading), whereas (29)Si MAS NMR and high-resolution thermogravimetry showed essentially quantitative incorporation of the organosilane. Thus, a hitherto unachieved loading level for pendant groups, considered by many to be impossible to achieve for stable organosilicas because of the expected framework connectivity constraints, has been obtained. The resulting vinyl-functionalized silicas exhibited gradually decreasing pore diameter (from 2.8 to 1.7 nm for TEVS loadings of 25-65%) and pore volume as the loading of pendant groups increased, but the specific surface area was relatively constant. Because of the reactivity of vinyl groups, ordered silicas with very high loadings of these groups are expected to be robust starting materials for the synthesis of other organic-functionalized ordered microporous materials. Herein, we demonstrate that these starting materials can also be transformed via calcination into ordered microporous silicas with pore diameters tailorable from 2.5 to as little as 1.4 nm simply by using an appropriate loading of the vinyl-functionalized precursor. This ease of the micropore size adjustment and the attained degree of structural ordering (as judged from XRD) have not been reported before. The novel ordered microporous materials reported herein are promising as adsorbents and catalyst supports.     

A strategy to incorporate monodispersed PbS nanoparticles into ordered mesoporous silica monolith

A new synthetic procedure has been developed for the preparation of ordered mesoporous silica monoliths doped with uniform PbS nanoparticles (NPs). Ordered mesoporous silica monoliths functionalized with thiol groups have been synthesized through co-condensation method in a lyotropic liquid crystalline system. Thiol groups on the interior wall facilitate the incorporation of Pb²⁺ cations and the formation of PbS NPs inside the ordered mesopores. Combined analysis results indicate that the PbS NPs with a uniform particle size of about 2.5 nm are mostly confined inside the ordered pores of hosts. A great blue shift in the absorbance spectrum has been observed, which shows an obvious quantum confinement effect.     

Design of molecularly ordered framework of mesoporous silica with squared one-dimensional channels

Mesoporous silica with squared one-dimensional channels (KSW-2-type mesoporous silica), possessing a molecularly ordered framework arising from a starting layered polysilicate kanemite, was obtained through silylation of a surfactant (hexadecyltrimethylammonium, C16TMA)-containing mesostructured precursor with octoxytrichlorosilane (C8H17OSiCl3) and octylmethyldichlorosilane (C8H17(CH3)SiCl2). The presence of the molecular ordering in the silicate framework was confirmed by XRD and TEM. Octoxy groups grafted on KSW-2 can be eliminated by subsequent hydrolysis under very mild condition, and pure mesoporous silica was obtained with the retention of the kanemite-based framework. The framework is structurally stabilized by the attachment of additional SiO4 units to the framework, and the mesostructural ordering hardly changed under the presence of water vapor. A large number of silanol groups remained at the mesopore surfaces because C16TMA ions and octoxy groups can be removed without calcination. Octylmethylsilyl groups are regularly arranged at the mesopore surface due to the molecular ordering in the silicate framework. The molecularly ordered structural periodicity originating from kanemite is retained even after calcination at 550 degrees C, while that in the precursor without silylation disappeared. The synthetic strategy is quite useful for the design of the silicate framework of mesostructured and mesoporous materials with and without surface functional organic groups.     

Highly ordered three-dimensional large-pore periodic mesoporous organosilica with Im3m symmetry

Highly ordered three-dimensional Im3m-type periodic mesoporous organosilica with a cavity size of 9.8 nm has been synthesized under strongly acidic media in the presence of inorganic salts using triblock copolymer F127 as the template and 1,2-bis(trimethoxysilyl)ethane as the organically bridged silica source.     

A simple approach to prepare monodisperse mesoporous silica nanospheres with adjustable sizes

A new and facile approach has been developed to prepare monodisperse mesoporous silica nanospheres (MMSNs) with controlled particle sizes and pore structures. In our approach, MMSNs were synthesized simply in a sodium acetate solution without adding any other alkali or alcohol additives. MMSNs have a spherical shape and uniform particle sizes, which can be adjusted from 50 to 110 nm by increasing the reaction temperature from 40 to 80 °C. By performing a subsequent hydrothermal treatment (HT) under basic condition (pH=~11.5) at 130 °C, the mesoporous pore volume and surface area can be enhanced, while keeping the mono-dispersion characteristics and the mesopore size almost unchanged. The pore sizes of MMSNs can be adjusted from 2.8 to 4.0 nm under acidic solutions by changing the HT temperature from 100 to 130 °C. The formation process of MMSNs has been investigated by transmission electron microscopy (TEM) and attenuated total reflection Fourier transform infrared (ATR-FTIR) techniques. A spherical micelle templating mechanism is proposed to explain the formation of MMSNs in our system, which is different from that of traditional highly ordered mesoporous silica nanoparticles (MCM-41).     

A novel ordered cubic mesoporous silica templated with tri-head group quaternary ammonium surfactant

An ordered mesoporous silica with novel cubic structure (space group Fd3m) has been synthesized by using tri-head group quaternary ammonium surfactants [CmH2m + 1N+(CH3)2CH2CH2N+(CH3)2CH2CH2CH2N+(-)(CH3)(3).3Br-] (Cm-2-3-1, m = 14, 16, 18) as the structure-directing agents under basic conditions at low temperature.     

Preparation of amino-functionalized mesoporous silica thin films with highly ordered large pore structures

Highly ordered amino-functionalized mesoporous silica thin films have been directly synthesized by co-condensation of tetraethoxysilane (TEOS) and 3-aminopropyltriethoxysilane (APTES) in the presence of triblock copolymer Pluronic P123 surfactant species under acidic conditions by sol-gel dip-coating. The effect of the sol aging on thin films organization is systematically studied, and the optimal sol aging time is obtained. The amino-functionalized mesoporous silica thin films exhibit a long-range ordering of 2D hexagonal (p6mm) mesostructure with a large pore size of 8.3 nm, a large Brunauer–Emmett–Teller (BET) specific surface area of 680 m² g⁻¹ and a large pore volume of 1.06 cm³ g⁻¹ following surfactant extraction as demonstrated by X-ray diffraction (XRD), Transmission electron microscope (TEM), and physical adsorption techniques. Based on BET surface area and weight loss, the surface coverage of amino-groups for the amino-functionalized mesoporous silica thin films is calculated to be 3.2 amino-groups per nm². Moreover, the functionalized thin films display improved properties for immobilization of cytochrome c in comparison with pure-silica mesoporous thin films.     

Synthesis of highly active nanostructured PtRu electrocatalyst with three-dimensional mesoporous silica template

Nanostructured PtRu material has been successively synthesized via chemical co-reduction of hexachloroplatinic acid and ruthenium trichloride using three-dimensional (3D) hexagonal mesoporous SBA-12 silica as a solid template, and has been studied as an electrocatalyst toward methanol electro-oxidation. The ordered nanostructure of the PtRu particles has been disclosed by transmission electron micrographs and is characterized by regular pores of ca. 3.0 ± 0.3 nm in diameter separated by walls of ca. 3.0 ± 0.3 nm thick. X-ray diffraction and energy dispersive X-ray spectroscope studies indicate that the PtRu material comprises of complicated phases rather than a single alloy phase of Pt and Ru. The specific electrochemical surface area of the nanostructured powder measured using both CO and underpotential deposited Cu stripping techniques is 74–78 m² g^–1, higher than that of unsupported precious metal catalysts prepared using standard techniques. The combination of high surface area and periodic nanostructure of the templated PtRu makes it an interesting promising fuel cell electrocatalyst. This has been demonstrated by the high activity of the templated PtRu towards the methanol electrooxidation. Therefore the solid template route based on 3D mesoporous silica with controlled pore size and high pore interconnectivity provides an interesting alternative to produce promising high-surface-area electrode materials.     

Dual latex/surfactant templating of hollow spherical silica particles with ordered mesoporous shells

Hollow spherical silica particles with hexagonally ordered mesoporous shells are synthesized with the dual use of cetyltrimethylammonium bromide (CTAB) and unmodified polystyrene latex microspheres as templates in concentrated aqueous ammonia. In most of the hollow mesoporous particles, cylindrical pores run parallel to the hollow core due to interactions of CTAB/silica aggregates with the latices. Effects on the product structure of the CTAB:latex ratio, the amount of aqueous ammonia, and the latex size are studied. Hollow particles with hexagonally patterned mesoporous shells are obtained at moderate CTAB:latex ratios. Too little CTAB causes silica shell growth without surfactant templating, and too much induces nucleation of new mesoporous silica particles without latex cores. The concentration of ammonia must be large to induce co-assembly of CTAB, silica, and latex into dispersed particles. The results are consistent with the formation of particles by addition of CTAB/silica aggregates to the surface of latex microspheres. When the size and number density of the latex microspheres are changed, the size of the hollow core and the shell thickness can be controlled. However, if the microspheres are too small (50 nm in this case), agglomerated particles with many hollow voids are obtained, most likely due to colloidal instability.     

Fabrication of sulfonated mesoporous carbon by evaporation induced self-assembly/carbonization approach and its supercapacitive properties

Synthesis of functionalized mesoporous carbon by an easy-accessed method is of great importance towards its practical applications.Herein,an evaporation induced self-assembly/carbonization(EISAC) method was developed and applied to the synthesis of sulfonic acid group functionalized mesoporous carbon(SMC).The final mesoporous carbon obtained by EISAC method possesses wormlike mesoporous structure,uniform pore size(3.6 nm),large surface area of 735 m²/g,graphitic pore walls and rich sulfonic acid group.Moreover,the resultant mesoporous carbon achieves a superior electrochemical capacitive performances(216 F/g)to phenolic resin derived mesoporous carbon(OMC,152 F/g)and commercial activated carbon(AC,119 F/g).     

Rational design of ordered mesoporous carbon with controlled bimodal porosity via dual silica templating route

Combining both nano-replication and nano-imprinting techniques using dual silica templates provides a simple way to synthesize ordered mesoporous carbons with bimodal pore size distributions ( approximately 1.5 nm and approximately 3.5 nm).     

Synthesis of transparent and ordered mesoporous silica monolithic films embedded with monomeric zinc phthalocyanine dye

Monolithic transparent mesoporous silica films embedded with zinc phthalocyanine (ZnPc) have been synthesized and it is shown that the encapsulated ZnPc dye molecules exist predominantly in monomeric form.