Characterization of Conducting Copolymer of Thiophene via Pyrolysis Mass Spectrometry

In this work, structural and thermal characterization of a conducting copolymer of thiophene (PTh) with 2‐methylbutyl‐2‐(3‐thienyl)acetate prepared by two different methods has been performed by pyrolysis mass spectrometry techniques. The pyrolysis mass spectrometry data of both components of the copolymer, polythiophene, PTh, poly(2‐methylbutyl‐2‐(3‐thienyl)acetate), PMBTA and PTh/PMBTA have been analyzed and compared. It has been determined that when the electrochemical polymerization of thiophene was achieved on PMBTA coated anode through the thiophene moieties of PMBTA, characteristics of both PTh and PMBTA were retained to a certin extent. However, when thiophene was polymerized in the presence of MBTA, a polymer film with lower conductivity, but more uniform structure, was produced.     

Preparation,Characterization and Electromagnetic Shielding Effectiveness of Conductive Polythiophene/Poly(ethylene terephthalate) Composite Fibers

Conductive polythiophene (PTh)/poly(ethylene terephthalate) (PET) composite fibers were prepared by polymerization of thiophene in the presence of PET fibers in acetonitrile medium using FeCl₃. The effects of polymerization conditions such as oxidant/monomer mol ratio and polymerization temperature and time on PTh content and surface electrical resistivity of PTh/PET composite fiber were investigated in detail. It was observed that the usage of preswelled PET fibers in dichloromethane increased the PTh content and decreased surface resistivity of composite fiber. Composite fiber having the highest PTh content (5.7%) and the lowest surface resistivity (80 kΩ) was obtained at 20°C with 1.25 M FeCl₃ and 0.42 M thiophene concentrations. The washing effects of laundering detergent and dry cleaning liquid on surface resistivity of composite fibers were investigated. The electromagnetic shielding effectiveness (EMSE) and relative shielding efficiency by absorption and reflection of composite fibers were measured in the radio and microwave frequency range. The results show that the EMSE values decreased with increasing frequency from radio waves to microwaves with an attenuation of 21 dB to 4 dB.     

Synthesis of a novel macroinimer based on thiophene and poly(ε‐caprolactone) and its use in electrochromic device application

Synthesis of a novel macroinimer comprising poly(ε‐caprolactone) (PCL) and thiophene (Th) and its use in electrochromic device (ECD) application have been reported. First, a novel Th monomer ( 5 ) with miktofuntional initiator groups (primary hydroxyl and tertiary bromide at the third position of the thiophene ring) was synthesized in a four‐step reaction sequence. Density functional theory‐predicted bond lengths, angles, and vibrations of 5 were in good agreement with available experimental vibrational spectra. Subsequently, ring‐opening polymerization of ε‐caprolactone (ε‐CL) was carried out in bulk using 5 as the initiator and tin(II) 2‐ethylhexanoate (Sn(Oct)₂) as the catalyst at 115 °C, which led to α‐thiophene end‐capped PCL macroinimer (PCL‐Th). Furthermore, PCL‐Th macroinimer was used in electrochemical copolymerization with pyrrole (Py) and Th. PCL‐Th/PTh copolymer film synthesized on indium tin oxide‐coated glass slide showed electrochromic behavior. Optical analyses of the PCL‐Th/PTh copolymer film indicated that the copolymer film was suitable to be used as an anodically coloring material for ECD applications. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Morphological and spectroscopic analyses of poly(alkyl methacrylate)/poly(thiophene) composite nanoparticles prepared by dual initiation system

Poly(alkyl methacrylate)/poly(thiophene) (PAMA/PTh) core/shell nanoparticles were synthesized using a one-pot dual initiation system. A ferric chloride/hydrogen peroxide mixture and sodium vinyl sulfonate were used as an initiator couple and a reactive surfactant, respectively. In the dual initiation, process variables such as the concentration of reactive surfactant, monomer ratio, and monomer type were adjusted to control the particle size of PAMA/PTh core/shell nanoparticles from 192 to 1,172 nm. The inner structure of the core/shell nanoparticles was confirmed in their morphological transition from spherical particles to a crumpled sheath using a solvent extraction method and field-emission scanning electron microscopy. From the spectroscopic data, it was found that the UV-adsorption and fluorescent emission intensity of PAMA/PTh latexes increased with a decrease in the average particle size. The quantum efficiency of all the samples was approximately 12 % and was unaffected by the particle size.     

水溶液电化学法制得的聚噻吩的表征

以剖层X光电子能谱(XPS)及红外光指(FTIR)为主要手段对高氯酸水溶液中电化学聚合的聚噻吩进行表征,表明有羰基及键合氯存在,并讨论了聚合过程。     

Synthesis and Characterization of Multi‐Walled Carbon Nanotube/Polythiophene Composites

Multi‐walled carbon nanotube (MWCNT)/polythiophene (PTh) composites have been prepared by in situ chemical oxidative polymerization. PTh is synthesized onto the sidewalls of the MWCNTs, which play a role as hard templates for PTh to produce one‐dimensional nanostructures. The morphology and structures of the MWCNT/PTh composites are characterized by High‐resolution transmission electron microscopy, x‐ray diffraction, and Fourier transform infrared spectrometry. Their electrical property and thermal stability are determined using vector network analyzer and thermal gravimetric analyzer. Moreover, the mechanism of MWCNT/PTh nanowire formation is described. The studies show that the composites are nanowires with core‐shell structure, in which the outer shells and inner cores are formed by PTh and MWCNTs, respectively. The addition of MWCNTs does not change the backbone structure of PTh and affect the amorphous condition of PTh very slightly, however, it improves the electrical conductivity and thermal stability of PTh.     

Conducting graft copolymers of poly(3‐methylthienyl methacrylate) with pyrrole and thiophene

A thiophene‐functionalized methacrylate monomer (3‐methylthienyl methacrylate) was synthesized via the esterification of 3‐thiophene methanol with methacryloyl chloride. The methacrylate monomer was polymerized by free‐radical polymerization in the presence of azobisisobutyronitrile as the initiator. Graft copolymers of poly(3‐methylthienyl methacrylate) (PMTM2) and polypyrrole and of PMTM2 and polythiophene were synthesized by constant‐potential electrolyses. p‐Toluene sulfonic acid, sodium dodecyl sulfate, and tetrabutylammonium tetrafluoroborate were used as the supporting electrolytes. PMTM2‐coated platinum electrodes were used as anodes in the polymerization of pyrrole and thiophene. Moreover, the oxidative polymerization of poly(3‐methylthienyl methacrylate) (PMTM1) was studied with FeCl₃ as the oxidant. The self‐polymerization of PMTM1 was also investigated by galvanostatic electrolysis both in dichloromethane and in propylene carbonate. The structures of PMTM1 and PMTM2 were investigated by several spectroscopic and thermal methods. The grafting process was elucidated with conductivity measurements, Fourier transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and scanning electron microscopy studies. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4131–4140, 2002     

A facile route of polythiophene nanoparticles via Fe3+‐catalyzed oxidative polymerization in aqueous medium

We have demonstrated that unsubstituted thiophene can be polymerized by Fe³⁺‐catalyzed oxidative polymerization inside nanosized thiophene monomer droplets, that is, nanoreactors, dispersed in aqueous medium, which can be performed under acidic solution conditions with anionic surfactant. Besides, we proposed a synthetic mechanism for the formation of the unsubstituted polythiophene nanoparticles in aqueous medium. This facile method includes a FeCl₃/H₂O₂ (catalyst/oxidant) combination system, which guarantees a high conversion (ca. 99%) of thiophene monomers with only a trace of FeCl₃. The average particle size was about 30 nm, within a narrow particle‐size distribution (PDI = 1.15), which resulted in a good dispersion state of the unsubstituted polythiophene nanoparticles. Hansen solubility parameters were introduced to interpret the dispersion state of the polythiophene nanoparticles with various organic solvents. The UV–Visible absorption and photoluminescence (PL) spectrum were measured to investigate the light emitting properties of the prepared unsubstituted polythiophene nanoparticle emulsions. According to non‐normalized PL analysis, the reduced total PL intensity of the polythiophene nanoparticle emulsions can be rationalized by self‐absorption in a wavelength range less than 500 nm. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2097–2107, 2008     

Pyrolysis Mass Spectrometry Analysis of Electrochemically Grafted Polyacrylonitrile with Thiophene

In this work, structural and thermal analyses of a polythiophene/polyacrylonitrile (PTh/PAN) sample, prepared by electrochemical polymerization of thiophene onto a poly(acrylonitrile) coated anode, have been performed by a direct insertion probe pyrolysis mass spectrometry technique. The evolution profiles of PTh based products from PTh/PAN showed nearly identical trends with those recorded during the pyrolysis of pure PTh. However, when PAN based products were considered, contrary to the trends observed for pure PAN, evolution of HCN and the degradation products due to the homolytic cleavages of the polymer backbone continued throughout the pyrolysis indicating a significant increase in their production even at the final stages of pyrolysis. On the other hand, the yield of thermal degradation products associated with decomposition of the unsaturated cyclic imine segments decreased. A careful analysis of the data pointed out the presence of mixed dimers. Yet, because of the possible contributions of various products to the corresponding peaks, a copolymer formation cannot be confirmed.     

Frontispiece: Dehalogenative or Deprotonative? The Preparation Pathway to the Organometallic Monomer for Transition-Metal-Catalyzed Catalyst-Transfer-Type Polymerization of Thiophene Derivatives

Due to a wide range of applications in electronic materials, polythiophenes attract considerable attention in organic and polymer syntheses as well as in materials science. For the purpose of developing the practical synthetic protocol, this review focuses on the deprotonative pathway in the preparation of thiophene organometallic monomer, which was shown to be effective employing 2-halo-3-substituted thiophene as a monomer precursor. The thus metallated thiophene monomer was shown to undergo polymerization by nickel(II) complex catalysis, with which highly regioregular head-to-tail (HT)-type polythiophenes were obtained with controlled molecular weight and molecular weight distribution. Several polythiophene derivatives with modified thiophene-ring and side-chain structures were shown to be designed in order to achieve the designed functionality as materials.     

Thermal analysis of a new thiophene derivative and its copolymer

Thermal characteristics of a new thiophene derivative, 2-(thiophen-3-yl-)ethyl octanoate (OTE), its homopolymer (POTE), and copolymer with thiophene P(OTE-co-Th) were investigated via pyrolysis mass spectrometry. Thermal degradation of the copolymer started by lose of side chains and thiophene involving products evolved almost in the same temperature range where PTh degradation was detected, at slightly higher temperatures than PTh backbone decomposed during the pyrolysis of POTE. The extent of doping and network structure decreased in the order POTE<P(OTE-co-Th)<PTh.     

Synthesis and characterization of conducting polythiophene/carbon nanotubes composites

Conducting polythiophene (PTh)/single‐wall carbon nanotubes (SWNTs) composites were synthesized by the in situ chemical oxidative polymerization method. The resulting cablelike morphology of the composite (SWNT–PTh) structures was characterized with elemental analysis, X‐ray photoelectron spectroscopy, Raman spectroscopy, Fourier transform infrared, ultraviolet–visible spectroscopy, field emission scanning electron microscopy, thermogravimetric analysis, X‐ray diffraction, and transmission electron microscopy. The standard four‐point‐probe method was used to measure the conductivity of the samples. Field emission scanning electron microscopy and transmission electron microscopy analysis revealed that the SWNT–PTh composites were core (SWNTs) and shell (PTh) hybrid structures. Spectroscopic analysis data for the composites were almost identical to those for PTh, supporting the idea that SWNTs served as templates in the formation of a coaxial nanostructure for the composites. The physical properties of the composites were measured and also showed that the SWNTs were modified by conducting PTh with an enhancement of various properties. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5283–5290, 2006     

Novel Cross‐Linked Conducting Polythiophene with Yellow‐Green‐Light‐Emitting Properties and Good Thermal Stability

A novel conjugated polythiophene derivative with polymethacrylate attaching to the polymer backbone via an alkyl spacer was successfully synthesized. A methacrylate‐substituted thiophene monomer, 3‐(hexyl methacrylate)thiophene was prepared and polymerized by free radical polymerization, followed by an electrochemical polymerization. The resulting polymer as a yellow‐green‐light emitter, has potential applications in photoelectronics area.     

Sol–gel synthesis and characterization of conducting polythiophene/tin phosphate nano tetrapod composite cation-exchanger and its application as Hg(II) selective membrane electrode

Nano tetrapod based on conducting polythiophene (PTh) and tin-phosphate (SnP) were synthesized by in situ chemical oxidative polymerization. The morphology of the resulting polythiophene tinphosphate composite was characterized by elemental analysis, fourier transform infrared spectroscopy, thermogravimetric analysis, powder X-ray diffraction, scanning electron microscopy and transmission electron microscopy. The physico-chemical characterization carried out on the composite showed that SnP was modified by conducting PTh with an enhancement of various properties. On the basis of highest distribution coefficient values for Hg(II), the composite was also used for the preparation of Hg(II) selective membrane electrode. The electrode showed working concentration range of 1 × 10^?1 to 1 × 10^?7 with Nernstian slope of 29.29 mV per decade change in concentration and the electrode may be used for wide working pH range of 4–8 having quick response time about 23 s. The life of electrode is 4 months without any notable drift in potential.     

聚噻吩/多壁碳纳米管复合材料的导电性能

通过共混多壁碳纳米管(MWNTs)和聚噻吩(PTh), 制备了PTh/MWNTs复合材料, 复合材料表现出良好的导电性能(电导率达16.1 S/m). 通过Raman, TG, XPS, UV-Vis等对复合材料进行了分析, 结果表明, MWNTs和 PTh之间存在强的相互作用, MWNTs上的离域电子与噻吩共轭主链上的π电子之间形成π-π共轭, 电子从MWNTs转移到聚噻吩, 增加了噻吩主链的有效共轭长度, 提高了复合材料的导电性能. FESEM分析表明, MWNTs和它周围被掺杂的聚噻吩通过π-π共轭作用结合在一起, 形成相对独立的导电单元, 在复合材料的导电体系中起到主要作用.     

Water‐Assisted Vapor Deposition of PEDOT Thin Film

The synthesis and characterization of poly(3,4‐ethylenedioxythiophene) (PEDOT) using water‐assisted vapor phase polymerization (VPP) and oxidative chemical vapor deposition (oCVD) are reported. For the VPP PEDOT, the oxidant, FeCl₃, is sublimated onto the substrate from a heated crucible in the reactor chamber and subsequently exposed to 3,4‐ethylenedioxythiophene (EDOT) monomer and water vapor in the same reactor. The oCVD PEDOT was produced by introducing the oxidant, EDOT monomer, and water vapor simultaneously to the reactor. The enhancement of doping and crystallinity is observed in the water‐assisted oCVD thin films. The high doping level observed at UV–vis–NIR spectra for the oCVD PEDOT, suggests that water acts as a solubilizing agent for oxidant and its byproducts. Although the VPP produced PEDOT thin films are fully amorphous, their conductivities are comparable with that of the oCVD produced ones.

     

聚噻吩制备条件对其结构和导电性能的影响

通过改变聚噻吩合成条件(温度、浓度、反应时间)得到各种不同样品, 用FESEM, FTIR光谱, Raman光谱, XRD, UV-Vis光谱和TG等手段对样品进行研究. 结果表明, 不同的制备条件会影响噻吩环的连接方式, 直接影响聚噻吩结构的分布. 导电性能研究表明, 聚噻吩的结构差异和其导电性能直接相关, 实验证明以α-α相连接的聚噻吩有更高的电导率.     

Preparation of rod-shaped polythiophene-coated polystyrene nanocomposite particles

Core-shell nanocomposite particles with polystyrene sphere core and polythiophene overlayer shell were synthesized through chemical oxidative polymerization of thiophene templated using uniquely structured polystyrene latex. The morphology of polythiophene shell, which has nanorod shaped or featureless surface morphology, can be simply controlled by varying the dosage and feeding protocol of oxidizers.     

末端为噻吩基的聚苯乙烯大分子单体的合成及其氧化偶联聚合

以丁基锂为引发剂、四氢呋喃为溶剂 ,在氮气气氛和 - 78℃下进行苯乙烯 (ST)阴离子聚合 ,并加入 3 溴噻吩作为终止剂 ,从而合成出末端含噻吩基的聚苯乙烯 (PST Thp) ,它可以进行氧化偶联聚合 ,是一类新的大分子单体 .在无水三氯化铁作用下 ,PST Thp可以进行均聚反应或与噻吩进行共聚反应 ,共聚反应生成主链刚性、支链分子量分布窄的聚 (噻吩 接枝 苯乙烯 ) (PThp g ST) ,凝胶渗透色谱、红外光谱和吸收光谱证实接枝共聚物的生成