Room temperature multiwavelength erbium-doped fiber ring laser using a highly nonlinear photonic crystal fiber

A multiwavelength laser source is demonstrated with a high power erbium-doped fiber amplifier as the gain medium. A highly nonlinear photonic crystal fiber (PCF) is inserted in the ring cavity to provide nonlinear gain by four-wave mixing. A Sagnac loop is incorporated in the ring cavity serving as a comb-like multichannel filter. The comparison between fiber ring laser without PCF and with PCF shows that the highly nonlinear PCF can generate a larger number of excited wavelengths and help stabilize the output power.     

用157 nm激光制作的光子晶体光纤法布里-珀罗传感器

157nm准分子激光用于微加工具有单光子能量高,峰值功率高,材料吸收系数高,分辨率高等优点。利用157nm激光微加工的方法,在光子晶体光纤上融切出微小矩形孔,从而构成腔长为45.6μm的微光纤法布里-珀罗干涉腔,得到的干涉条纹平滑,衬比度约为26dB,并从激光与石英材料的相互作用上分析了形成较好干涉条纹的原因。把这种微腔应用于应变测量,在550μm范围内,腔长增量相对于应变的灵敏度为0.32nm/μm,线形度达0.9994。实验证明该微腔对温度不敏感,800℃范围内腔长变化仅20nm。157nm准分子激光加工光纤法布里-珀罗腔方法简单,一次成型,具有较高的加工效率和精度,有望实现光纤法布里-珀罗腔的规模化批量制造,具有较好的应用前景。     

高温光子晶体光纤温度传感器

针对大于500℃的高温环境,提出了一种可用于高温温度测量的高温光子晶体光纤(PCF)温度传感器。在光子晶体光纤末端熔接一段纯石英无芯光纤构成外腔式光纤法珀腔(EFPI)结构。纯石英无芯光纤在高温下的热膨胀和热光效应使得EFPI的光学腔长发生变化。结合光纤白光干涉测量技术,通过测量EFPI的腔长得到被测温度。在不同温度环境下,对腔长为175μm的EFPI光纤温度传感器进行连续测量。测量结果显示,设计的高温光纤温度传感器在27~1100℃范围内,腔长-温度三阶拟合精度达到99.95%,腔长-温度灵敏度为(0.851+0.0023T-0.000000957T2)nm/℃,其中在1100℃时,温度测量分辨率为0.225℃。     

Analysis of high birefringence photonic crystal fiber with octagonal and squarely lattice

Aiming at the requirement of high birefringence, a new kind of photonic crystal fiber (PCF) with octagonal and squarely lattice is proposed. In this structure, squarely lattices are added in the inner layer to obtain high birefringence. Birefringence and dispersion as a function of wavelength and size of PCF are analyzed by using Finite Element Method (FEM). Simulation results show that this kind of PCF exhibits high birefringence with a magnitude of 10^?3, and one zero dispersion point is obtained simultaneously. In addition, the characteristics of PCF can be tuned by changing the size of fiber.     

Dispersion measurement of liquids with a fiber optic probe based on a bi-functional lensed photonic crystal fiber

We report a fiber optic probe suitable for measuring the wavelength dispersion of liquids. The measuring probe is made from an extrinsic fiber-optic cavity formed by a lensed photonic crystal fiber (PCF) and a micro-mirror. The custom-designed lensed PCF plays a dual role of collimator to help realize a long cavity length of the order of millimeters and as an efficient reflector to form the reference beam. The length of the cavity used in the experiment is about 1620 μm. In this article, we present the analytical method of obtaining dispersion of the liquid sample from the spectral interferogram of a single-arm or common path interferometer. Sodium chloride salt solutions with varied concentrations are used as an example to demonstrate the efficacy of the instrument. The index change with concentration is found to be linear at low concentrations and deviates from linearity as it approaches saturation.     

光子晶体光纤温度压力传感器

提出了一种在高温环境下同时测量温度和气压的光子晶体光纤温度压力传感器.在普通单模光纤和光子晶体光纤之间熔接一段空心光纤构成干涉结构.空心光纤段构成非本征法布里-珀罗干涉仪,利用光子晶体光纤的微孔与外界相通,通过气体折射率变化来测量环境中的气压变化;光子晶体光纤段构成本征法布里-珀罗干涉仪,利用热膨胀效应和热光效应来测量环境中的温度.传感器的解调通过自制的白光干涉解调仪实现,实验通过测量腔长得到被测环境的温度和气压.在不同温度和气压环境下,对腔长分别为306μm和1535μm的温度压力光纤传感器进行连续测量.实验结果表明,传感器能够在28~800℃的温度下和0~10 MPa的气压下稳定工作,测量范围内温度灵敏度可达17.4 nm/℃,压力灵敏度随温度增加而降低,在28℃时可达1460.5 nm/MPa.     

Switchable multi-wavelength fiber ring laser based on a compact in-fiber Mach-Zehnder interferometer with photonic crystal fiber

Switchable multi-wavelength fiber ring laser with an in-fiber Mach-Zehnder interferometer incorporated into the ring cavity serving as wavelength-selective filter at room temperature is demonstrated. The filter is formed by splicing a section of few-mode photonic crystal fiber (PCF) and two segments of single mode fiber (SMF) with the air-holes on the both sides of PCF intentionally collapsed in the vicinity of the splices. By adjusting the states of the polarization controller (PC) appropriately, the laser can be switched among the stable single-, dual- and triple-wavelength lasing operations by exploiting polarization hole burning (PHB) effect.     

基于椭球封闭空气腔的光纤复合法布里-珀罗结构折射率传感特性研究

提出了基于微椭球型空气腔的在线型光纤复合法布里-珀罗干涉结构,并对其折射率传感特性进行了研究.椭球型空气微腔是利用光纤熔接机对实芯光子晶体光纤和单模光纤以特定的熔接参数熔接形成.用高斯光束模型和ABCD法则分析了椭球型空气腔的腔内损耗,建立了电磁场在复合法布里-珀罗干涉结构中传播的物理模型.根据腔长比值的不同,环境折射率对干涉条纹的影响有对比度调制和波长调制,主要研究了一种波长调制型复合法布里-珀罗结构折射率传感器.仿真结果表明该折射率传感器在1—1.6范围内不出现折射率转折点;实验结果表明在1.333—1.466范围内,折射率灵敏度～37.088 nm·RIU-1,分辨率约为2.69×10-5.该光纤复合法布里-珀罗结构干涉条纹对比度高、体积小、成本低,用于折射率测量可靠性高、分辨率高、无折射率拐点、温度串扰小.     

High-temperature sensor using a Fabry-Perot interferometer based on solid-core photonic crystal fiber

A micro Fabry-Perot interferometer(M-FPI) is constructed by splicing a short section of polarizationmaintaining photonic crystal fiber(PM-PCF) to an end-cleaved single-mode fiber with controllable offset. Due to the high effective optical path difference induced by the solid core of the PCF,the M-FPI has an ultrasmall cavity of approximately 110μm.The temperature sensitivity within a range from 33℃to approximately 600℃is measured to be 13.8 pm/℃,which shows good agreement with the theoretical result.This proposed sensor has the advantages of ultracompact size and high stability.Therefore,it is suitable for various space-limited sensing applications in harsh environments.     

Photonic crystal fiber for fundamental mode operation of multicore fiber lasers and amplifiers

A mode-selection method based on a single-mode photonic crystal fiber (PCF) in the multicore fiber (MCF) lasers is presented. The designed PCF has a central core region formed by a missing air-hole, and three air-hole rings. With an appropriate choice of the design parameters of the PCF, the power coupling between the fundamental mode (FM) of the PCF and the fundamental MCF mode can be much higher than those between the FM and the other supermodes. As a result, the fundamental MCF mode has the maximum power reflection coefficient on the right-hand side of the MCF laser cavity, and dominates the output laser power. Since the maximum power of the fundamental MCF mode will lead to the desired laser beam profile, higher the fraction of the fundamental MCF mode power contained in the total output power contributes to higher beam quality. The numerical simulations show that the effectiveness of the fundamental MCF mode-selection is higher in the MCF lasers with the PCF as a mode-selection component than in the MCF lasers based on the free-space Talbot cavity method. Additionally, for the MCF amplifiers, an approach is presented to decrease the sensitivity of the amplifier performance to the variation of Gaussian beam waist utilizing the coupling between the Gaussian beam and the FM of the PCF. The numerical results show that this method can effectively increase the design flexibility for a broad range of the Gaussian beam waist.     

Numerical analyses of splice losses of photonic crystal fibers

Splice losses between a photonic crystal fiber (PCF) and a single mode fiber (SMF) or a PCF are numerically investigated by using finite element method (FEM) with the circular perfectly matched layer (PML). Results show that the splice loss between a SMF and a PCF with air holes completely collapsed can reach many times of that between a SMF and a PCF without air-hole collapse. We calculate the rotation losses between two identical PCFs of three kinds: large mode area, polarization maintaining and grapefruit. It is shown that for the large mode area PCF and the grapefruit PCF, the rotation losses are sensitive to the wavelength when the rotation angle is larger than zero degree. The non-circular mode field distribution is the main source of the rotation loss.     

等效折射率模型研究光子晶体光纤的色散特性

应用等效折射率模型对折射率导模光子晶体光纤的群速度色散特性进行了详细的讨论。由于光子晶体光纤由单一材料(SiO2)制成,光纤的波导色散决定了总色散,因此讨论中将群速度色散分解为波导色散和材料色散,研究了波导色散与光子晶体光纤的结构参量孔距∧、相对孔径f的关系。分析表明,在f一定的情况下,光子晶体光纤的波导色散与孔距∧的关系符合麦克斯韦方程的比例性质;而在孔距∧确定的情况下,光子晶体光纤的波导色散的零点、极小值点位置与f在所讨论的波长范围内存在线性关系。最后举例说明了通过调整光子晶体光纤的结构参量,可以灵活地设计其色散特性。     

Slow-light delay enhancement in small-core pure silica photonic crystal fiber based on Brillouin scattering

We demonstrate that we realize large-delay slow light based on stimulated Brillouin scattering in a short length of our fabricated small-core photonic crystal fiber (PCF). The cavity effect from the partially reflective splices in the end of the PCF enhances slow-light delay significantly. Our experiments show that large slow-light delay can be easily realized in a very short length of the PCF with a moderate pump power. Up to a one-half pulse-width delay is achieved in only 50 m of PCF in a single pump segment.     

光子晶体光纤拉制中工艺参数的控制

分析了光子晶体光纤拉制中各工艺参数之间的相互影响,建立了工艺参数与最终光纤结构之间的对应关系.在温度和送料速度的协调控制下,通过调节气压参数可有效控制气孔结构.实验拉制出孔径孔距比分别为0.45和0.8的单模以及高占空比光子晶体光纤.在制备非均匀孔径光子晶体光纤时,仅靠调控工艺参数往往难以拉制出理想结构,本文以一种单偏振单模PCF结构为例,对预制棒结构进行了优化设计.计算表明可由此拉制出满足要求的光子晶体光纤. 关键词： 光子晶体光纤 工艺参数 气压控制 气孔结构     

利用Kagome光纤实现多芯光子晶体光纤的输出合束

多芯光纤的输出光束只能在远场和焦点附近实现良好的同相位超模合束,这种超模传输特性大大影响了多芯光纤的应用范围.一种新型中空Kagome光纤为解决这一难题提供了可行的方案,利用中空Kagome光纤可以实现七芯光纤输出模式的整形合束.本文利用中心波长800 nm的钛宝石飞秒激光作为激光源,耦合入七芯非线性光子晶体光纤,得到700 nm至1050 nm的展宽光谱,并实现同相位超模输出.随后,将非线性展宽之后的宽谱七芯光束耦合至Kagome光子晶体光纤中,从Kagome光纤输出光斑呈高斯分布的模式传输,不再演变回七芯模式,耦合效率71%.实验还进一步验证此方法适用于不同结构的多芯光纤,为多芯光纤在高功率激光等领域的应用提供了参考.     

Tunable microwave signal generation based on an Opto-DMD processor and a photonic crystal fiber

Frequency-tunable microwave signal generation is proposed and experimentally demonstrated with a dual-wavelength single-longitudinal-mode （SLM） erbium-doped fiber ring laser based on a digital Opto-DMD processor and four-wave mixing （FWM） in a high-nonlinear photonic crystal fiber （PCF）. The high-nonlinear PCF is employed for the generation of the FWM to obtain stable and uniform dual-wavelength oscillation. Two different short passive sub-ring cavities in the main ring cavity serve as mode filters to make SLM lasing. The two lasing wavelengths are electronically selected by loading different gratings on the Opto-DMD processor controlled with a computer. The wavelength spacing can be smartly adjusted from 0.165 nm to 1.08 nm within a tuning accuracy of 0.055 nm. Two microwave signals at 17.23 GHz and 27.47 GHz are achieved. The stability of the microwave signal is discussed. The system has the ability to generate a 137.36-GHz photonic millimeter signal at room temperature.     

宽带色散补偿光子晶体光纤的设计与优化

提出了一种新型的宽带色散补偿光子晶体光纤。通过增大光子晶体光纤(PCF)包层第一环空气孔半径r1,同时优化孔间距和包层其它环空气孔,在1550nm波长处获得了低至-1906.4ps/nm/km的负色散值。针对常规单模光纤的色散特性,设计出了宽带色散补偿光子晶体光纤,可补偿23倍长度的常规光纤,补偿的带宽达330nm,这在WDM系统中对多个信道同时进行色散补偿具有非常重要的意义。     

高双折射的混合格子太赫兹光子晶体光纤的设计与研究

提出了一种新型高双折射的混合格子太赫兹光子晶体光纤,通过对芯区亚波长尺寸的空气孔进行多种格子组合排列,增加结构的非对称性实现高的模式双折射. 全文仿真建模采用专业的有限元计算软件COMSOL Multiphysics 4.0,结果表明:混合格子太赫兹光子晶体光纤在很宽的频率范围内都具有较高的双折射(达到10^-2)和低的限制损耗,且通过改变光纤的某些参数可以灵活地控制其双折射或限制损耗特性. 相比于同类光通信波段光纤,由于太赫兹波波长较大,能够降低芯区微结构加工的难度,具有可行性. 关键词： 双折射 混合格子 太赫兹光子晶体光纤 限制损耗     

Design of diamond-shape photonic crystal fiber polarization filter based on surface plasma resonance effect

A novel plasmonic polarization filter based on the diamond-shape photonic crystal fiber(PCF) is proposed. The resonant coupling characteristics of the PCF polarization filter are investigated by the full-vector finite-element method. By optimizing the geometric parameters of the PCF, when the fiber length is 5 mm, the polarization filter has a bandwidth of 990 nm and an extinction ratio(ER) of lower than -20 dB. Moreover, a single wavelength polarization filter can also be achieved, along with an ER of -279.78 dB at wavelength 1.55 μm. It is believed that the proposed PCF polarization filter will be very useful in laser and optical communication systems.     

Multi-wavelength bismuth-based erbium-doped fiber laser based on four-wave mixing effect in photonic crystal fiber

A stable multi-wavelength erbium-doped fiber laser based on four-wave mixing (FWM) in a photonic crystal fiber (PCF) is demonstrated in this paper. The phase matching condition for four-wave mixing in the photonic crystal fiber has been enhanced using a seed signal and a polarisation controller to control the states of polarisation in the ring laser cavity. At a maximum pump power of 1480 nm, 5 lines are observed with nearly 2.15 nm spacing between the lines, and with a signal to noise ratio of more than 20 dB. The number of channels and wavelength spacing can be controlled by varying the output coupler ratio.