Synchronously pumped femtosecond optical parametric oscillator of congruent and stoichiometric MgO-doped periodically poled lithium niobate

A synchronously pumped femtosecond optical parametric oscillator based on congruent MgO-doped periodically poled lithium niobate (c-MgO:PPLN) is reported. The system, operating at room temperature, was pumped by a mode-locked Ti:sapphire laser. The wavelengths of the signal and idler waves were tuned from 870 nm to 1.54 μm and 1.58 to 5.67 μm, respectively, by changing the pump wavelength, the grating period or the cavity length. Pumped by 1.1 W of 755 nm laser radiation, the OPO generated 310 mW of 1080 nm radiation. This signal output corresponds to a total conversion efficiency of 50%. Without dispersion compensation the OPO generated phase-modulated signal pulses of 200 fs duration. Besides the OPO of c-MgO:PPLN, an OPO of stoichiometric (s) MgO:PPLN was investigated. Because of the reduced sensitivity to photorefractive damage, both crystals allowed efficient OPO operation at room temperature. Received: 19 August 2002 / Revised version: 11 December 2002 / Published online: 19 March 2003 RID="*" ID="*"Corresponding author. Fax: +49-631/205-3906, E-mail: andres@physik.uni-kl.de     

Blue 489-nm picosecond pulses generated by intracavity frequency doubling in a passively mode-locked optically pumped semiconductor disk laser

We report the generation of blue 489-nm picosecond laser pulses by intracavity second-harmonic generation in a mode-locked optically pumped InGaAs vertical-external-cavity surface-emitting laser. Mode locking achieved by a semiconductor saturable absorber mirror generated 5.8-ps-long sech²-shaped pulses at an emission wavelength of 978 nm and a repetition rate of 1.88 GHz. Intracavity frequency doubling in a 5-mm-long lithium triborate crystal generated blue picosecond pulses with a spectral width of 0.15 nm and an average output power of up to 6 mW.     

A 9.5-W 82-MHz-repetition-rate picosecond optical parametric generator with cw diode laser injection seeding

We report on an injection-seeded 9.5-W 82-MHz-repetition-rate picosecond optical parametric generator (OPG) based on a 55 mm long crystal of periodically poled lithium niobate (PPLN) with a quasi-phase-matching (QPM) grating period of 29.75 μm. The OPG is excited by a continuously diode pumped mode-locked picosecond Nd:YVO₄ oscillator-amplifier system. The laser system generates 7 ps pulses with a repetition rate of 82.3 MHz and an average power of 24 W. Without injection-seeding the total average output power of the OPG is 8.9 W, which corresponds to an internal conversion efficiency of 50%. The wavelengths of the signal and idler waves were tuned in the range 1.57–1.64 μm and 3.03–3.3 μm, respectively, by changing the crystal temperature from 150 °C to 250 °C. Injection seeding of the OPG at 1.58 μm with 4 mW of single frequency continuous-wave radiation of a distributed-feedback (DFB) diode laser increases the OPG output to 9.5 W (53% conversion efficiency). The injection seeding increases the pulse duration and reduces the spectral bandwidth. When pumped by 10 W of 1.06 μm laser radiation, the duration of the signal pulses increased from 3.6 ps to 5.5 ps while the spectral bandwidth is reduced from 4.5 nm to 0.85 nm. Seeding thus improved the time-bandwidth product from 1.98 to a value of 0.56, much closer to the Fourier limit. Received: 29 April 2002 / Published online: 8 August 2002     

Dye laser pumped, continuous-wave KTP optical parametric oscillators

4 (KTP) optical parametric oscillators (OPOs) with pump and idler resonant cavities. With a linear two-mirror cavity the pump power at threshold was 70 mW. The single-frequency signal and idler output wavelengths were tuned in the range of 1025 to 1040 nm and 1250 to 1380 nm by tuning the dye laser in the range of 565 to 588 nm. With a dual three-mirror cavity the threshold was 135 mW. Pumped by 500 mW of 578 nm radiation the 1040 nm single-frequency signal wave output power was 84 mW. Power and frequency stable operation with a spectral bandwidth of less than 9 MHz was obtained by piezo-electrically locking the length of the pump resonant cavity to the dye laser wavelength. Similar performance was achieved by placing the idler resonant OPO inside the resonator of the dye laser. With this system power stable and single-frequency operation was achieved with a spectral bandwidth of less than 11 MHz for the idler wave. Received: 3 February 1998/Revised version: 9 March 1998     

Rapid infrared wavelength access with a picosecond PPLN OPO synchronously pumped by a mode-locked diode laser

We theoretically and experimentally investigate wavelength tuning of synchronously pumped optical parametric oscillators (OPOs) on changing the cavity length or the pump-repetition rate. Conditions for rapid and wide-range wavelength access are derived. Using an OPO pumped directly by a mode-locked diode-laser master-oscillator power-amplifier (MOPA) system, an all-electronically controlled access to near- and mid-infrared wavelengths is demonstrated. The singly (signal) resonant OPO is based on periodically poled lithium niobate (PPLN) and emits 8 ps idler pulses at a repetition rate of 2.5 GHz in the wavelength range 1986 to 2348 nm (signal: 1530 to 1737 nm). Wavelength tuning over 114 nm (signal) and 189 nm (idler) is achieved solely by electronically varying the repetition rate of the diode-laser oscillator over 720 kHz. By controlling the repetition rate with a programmable driver, an arbitrary emission sequence of the OPO on two wavelength channels is generated, with access times as short as 10 μs. 11 OPO wavelengths equally spaced in the range 1627–1689 nm (signal) or 2054–2154 nm (idler) could be addressed. Received: 6 September 2000 / Revised version: 16 March 2001 / Published online: 23 May 2001     

Intensity noise of pump-enhanced continuous-wave optical parametric oscillators

4 (RTA), which provides a threshold pump power of 16 mW. The maximum signal wave power is 23 mW at a wavelength of 1243 nm. The spectral bandwidth of the signal wave is less than 750 kHz. Received: 3 February 1998     

掺Yb3+光纤环形激光器研究

报道了采用环形腔结构,使用偏振敏感的光隔离器构成掺Yb3+光纤激光器激光输出特性研究结果.用976 nm半导体激光器作为泵浦激光,获得了2.35 mW的最大输出功率,激光的中心波长为1.0537 μm,泵浦阈值功率为42 mW.在改变腔内偏振控制器的状态时,激光器的输出波长移动到1.066 μm.在时域,实验观测到掺Yb3+环形激光器的自脉动信号输出.     

A High Efficiency Yb~(3 )-doped Fiber Ring Cavity Laser with Narrow Line-width

1　Ｉｎｔｒｏｄｕｃｔｉｏｎ　　Ｔｏｄａｙ ,ｔｈｅＥｒ3 ｄｏｐｅｄｆｉｂｅｒｌａｓｅｒａｎｄｔｈｅａｍｐｌｉｆｉｅｒａｒｅｗｉｄｅｌｙｕｓｅｄｉｎｔｈｅｆｉｅｌｄｏｆｏｐｔｉｃａｌｃｏｍｍｕｎｉｃａｔｉｏｎａｎｄｏｔｈｅｒｆｉｅｌｄｓ.ＴｈｅＹｂ3 ｄｏｐｅｄｆｉｂｅｒｌａｓｅｒａｎｄａｍｐｌｉｆｉｅｒｈａｖｅｂｅｅｎｉｎｖｅｎｔｅｄａｎｄｕｓｅｄｉｎｍａｎｙｉｍｐｏｒｔａｎｔｆｉｅｌｄｓｔｏｏ ,ａｎｄｔｈｅｙａｒｅａｔｔｒａｃｔｉｎｇｍｏｒｅａｎｄｍｏｒｅａｔｔｅｎｔｉｏｎ[1～ 4 ] .Ｃｏｍｐａｒ…     

Microsecond pulsed optical parametric oscillator pumped by a Q-switched fiber laser

We report on what is to our knowledge the first optical parametric oscillator (OPO) pumped by microsecond pulses from a wavelength-tunable solid-state laser. The singly resonant OPO (SRO) is based on a periodically poled LiNbO3 crystal and pumped with 2.1-micros-long pulses from an actively Q-switched Yb fiber laser. At an average fiber laser power of 3.6 W, the SRO generates 1.9-micros-long pulses with a repetition rate of 25 kHz and an average power of 560 mW at 3360 nm. The SRO was tuned from 1518 to 1634 nm (signal) and from 3145 to 3689 nm (idler) via the crystal temperature and poling period. By all-electronic tuning of the fiber laser wavelength over 19 nm, tuning of the mid-infrared idler wavelength over 195 nm was achieved.     

Generation of Anti-Stokes Line in Fundamental Mode of Photonic Crystal Fibre

A photonic crystal fibre （PCF） with zero-dispersion wavelength around 800 nm is designed and fabricated. Simulated results show that the zero-dispersion wavelength of fundamental mode for this PCF is at 826nm, and phase-matched four-wave mixing can be achieved in fundamental mode. Using 20ors Ti：sapphire laser with central wavelength at 810nm as pump, the anti-Stokes line around 610hm ＆ generated efficiently. The output signal has a Gaussian-like profile, which indicates that the anti-Stokes signal is in the fundamental mode of the PCF. The energy of anti-Stokes signal is higher than that of residual pump laser and the maximum ratio of the anti-Stokes signal to the pump component in the output spectrum is estimated to be 1.2.     

Doubly resonant continuous-wave optical parametric oscillator pumped by a single-mode diode laser

The performance characteristics of a doubly (signal and idler) resonant continuous-wave optical parametric oscillator based on periodically poled lithium niobate and pumped by a 100-mW single-mode laser diode at 810 nm are reported. Pump power thresholds as low as 16 mW and wavelength tuning over the range 1.15-1.25 microm at the signal and 2.31-2.66 microm at the idler were achieved through variation of crystal temperature, pump wavelength, and grating period. Up to 5 mW of signal output was obtained with the single-mode diode pump, and signal powers of up to 39 mW were obtained when pumping with a 400-mW injection-locked broad-area diode laser.     

Spectral properties and numerical modelling of a critically phase-matched nanosecond LiB3O5 Optical Parametric Oscillator

We report on the spectral properties and numerical modelling of a singly resonant Optical Parametric Oscillator (OPO) of Lithium-triBOrate (LBO). The OPO is pumped by the second, third or fourth harmonic of an injection-seeded,Q-switched Nd:YAG laser. The measured OPO parameters are the tuning range, the threshold, the spectral linewidth, the efficiency and the output power. For the LBO-OPO critical type-I phase-matching (xy-plane) provides a wide tuning range and optimum values of the effective nonlinear coefficient. Pumped, for example, by the 355nm third harmonic the spectral range extends from 414 nm to 2.47 µm. With a 15 mm long crystal the OPO generates a total output-pulse energy of 77 mJ with an efficiency of 45%. For 266 nm pump radiation the signal wave is in the near ultraviolet at 307–325 nm. If pumped at 532 nm the OPO generates simultaneously two pairs of signal and idler waves in the infrared (0.707–2.15 µm). The pulse-energy fluctuations of the two pairs are correlated. If, however, the OPO is injection-seeded at one of the signal waves the two wavelength pairs are anti-correlated. The observed wavelength tuning as well as the measured spectral line-widths, threshold energies and efficiencies are in agreement with the values predicted by computer simulation.     

Optimization of optical parametric chirped pulse amplification with different pump wavelengths

Optical parametric chirped pulse amplification with different pump wavelengths was investigated using LBO crystal, at signal central wavelength of 800 nm. According to our theoretical simulation, when pump wavelength is 492.5 nm, there is a maximal gain bandwidth of 190 nm centered at 805 nm in optimal noncollinear angle using LBO. Presently, pump wavelength of 492.5 nm can be obtained from second harmonic generation of a Yb:Sr₅(PO₄)₃F laser. The broad gain bandwidth can completely support ∼6 fs with a spectral centre of seed pulse at 800 nm. The deviation from optimal noncollinear angle can be compensated by accurately tuning crystal angle for phase matching. The gain spectrum with pump wavelength of 492.5 nm is much better than those with pump wavelengths of 400, 526.5 and 532 nm, at signal centre of 800 nm.     

2.5-GHz repetition-rate singly resonant optical parametric oscillator synchronously pumped by a mode-locked diode oscillator amplifier system

We report on an optical parametric oscillator (OPO) that is synchronously pumped directly by a diode laser. This laser is an actively mode-locked master-oscillator power-amplifier system that produces 20-ps pulses at 927 nm with a repetition rate of 2.5 GHz and an average power of 0.9 W. The OPO, which is a singly resonant device based on periodically poled lithium niobate, generates 7.8-ps pulses. The OPO threshold is 300 mW of average pump power, and the maximum average idler output power is 78 mW at a wavelength of 2100 nm. By changing the crystal temperature we can wavelength tune the output in the ranges 1530-1737 nm (signal) and 1986-2348 nm (idler). Rapid wavelength tuning of the OPO over 46 nm (signal) and 74 nm (idler) is achieved through tuning the cavity length over 28 microm by use of a piezoelectric transducer.     

Efficient Tm：YAG Ceramic Laser at 2 μm

We demonstrate a high-efficiency continuous-wave Tm： YAG ceramic laser pumped with a Ti：sapphire laser. An output power up to 860mW is obtained under an absorbed pump power of 2.21 W at 785nm, corresponding to a slope efficiency of 42.1% and optical to optical efficiency of 22%. The measured central wavelength is 2012nm.     

全固态多波长飞秒脉冲激光系统

利用棱镜对引进频谱空间啁啾来补偿飞秒脉冲激光二次谐波产生中的相位失配,提高了倍频效率建立了一套全固态、多波长(1065nm, 532nm,823.1nm, 402nm)飞秒脉冲激光系统自制的Nd:YVO4激光器输出532nm绿光激光,最高平均功率可达5.6W当用2.5W绿光激光泵浦时,从自制的钛宝石激光器及经BBO倍频可分别输出中心波长为823.1nm和402nm,平均功率300mW和73mW,谱宽32.3nm和5.1nm,脉宽22fs和33.3fs、重复率108MHz的近红外和蓝光激光整个系统具有结构紧凑、倍频效率高、运行稳定的特点.     

Pump-Induced Lasing Wavelength Shift in Er/Yb Codoped Fiber Grating Lasers

１ＩｎｔｒｏｄｕｃｔｉｏｎＥｒｂｉｕｍ／Ｙｔｅｒｂｉｕｍｃｏｄｏｐｅｄｆｉｂｅｒｓａｒｅｉｄｅａｌｇａｉｎｍｅｄｉａｆｏｒｃｏｎｓｔｒｕｃｔｉｎｇｓｉｎｇｌｅｆｒｅｑｕｅｎｃｙｆｉｂｅｒｌａｓｅｒｓ．Ｔｈｅｉｒｂｒｏａｄａｂｓｏｒｐｔｉｏｎｂａｎｄ...     

Temperature-tuned difference-frequency mixing in periodically poled KTiOPO4

4 (PPKTP). We generated 12 μW of radiation tunable around 1.6 μm by difference-frequency mixing of the outputs of a frequency-doubled Nd:YLF laser at 523 nm (240 mW) and a tunable Ti:sapphire laser near 760 nm (340 mW). A temperature tuning rate of 0.73 nm/°C for the generated wavelength and a FWHM temperature acceptance bandwidth of 6.9 °C cm was observed. The effective d₃₃ coefficient was estimated to be ∼5 pm/V. Received: 02 September 1998     

CONTINUOUS-WAVE LASER OSCILLATION OF Yb:FAP CRYSTALS AT A WAVELENGTH OF 1043nm

A continuous-wave laser oscillation was demonstrated with a Yb-doped fluorapatite (FAP) crystal pumped with a 905 nm Ti:sapphire laser. The output characteristics for different output couplers were investigated. A maximum power of 67mW at a 1043nm wavelength was obtained with 10% output coupler, pumped by a Ti:sapphire laser with 910mW power. This corresponds to a slope efficiency of 26.5%.     

Dual-core ytterbium fiber amplifier for high-power 1060 nm swept source multichannel optical coherence tomography imaging

A novel (to our knowledge) dual-core ytterbium (Yb(3+)) doped fiber, as an optically pumped amplifier, boosts the output power from a 1060 nm swept source laser beyond 250 mW, while providing a wavelength tuning range of 93 nm, for optical coherence tomography (OCT) imaging. The design of the dual-core Yb-doped fiber amplifier and its multiple wavelength optical pumping scheme to optimize output bandwidth are discussed. Use of the dual-core fiber amplifier showed no appreciable degradation to the coherence length of the seed laser. The signal intensity improvement of this amplifier is demonstrated on a multichannel in vivo OCT imaging system at 1060 nm.