Effect of structure on thermal behaviour of epoxy resins

The paper deals with the curing behaviour of diglycidyl ether of bisphenol-A (DGEBA) using three novel multifunctional aromatic amines having phosphine oxide and amide-acid linkages. The amines were prepared by reacting tris(3-aminophenyl)phosphine oxide (TAP) with 1,2,4,5-benzenetetracarboxylic acid anhydride (P)/4,4^′-(hexafluoroisopropylidene)diphthalic acid anhydride (F)/3,3^′,4,4^′-benzophenonetetracarboxylic acid dianhydride (B). Amide-acid linkage in these amines is converted to thermally stable imide linkage during curing reaction. Curing temperatures of DGEBA were higher with phosphorylated amines than the conventional amine 4,4^′-diamino diphenyl sulphone (D). A decrease in initial decomposition temperature and higher char yields were observed when phosphorus containing amide-acid amines were used as curing agents for DGEBA.     

Synthesis and characterization of sulphonated PEES copolymers by NMR spectroscopy

Two sulphonated PEES copolymers were synthesized by reacting 75 or 60 mol% silylated hydroquinone sulphonic acid and 25 or 40 mol% of hydroquinone with 4,4′-difluorodiphenyl sulphone. The number average molecular weights determined by GPC were 13.250 and 12.050 g/mol. In the FTIR spectra, in addition to the characteristic absorption bands due to aromatic skeleton, absorption bands associated with sulphonic acid groups were observed at ∼3500, 1172, 1080, 1026, and 706 cm⁻¹. In ¹H NMR, the aromatic proton resonance signals were observed between δ = 6.99 and 7.96 ppm. ¹³C{¹H} NMR spectra of these copolymers were complex and in order to resolve this, two-dimensional (2D) NMR techniques were utilized. Heteronuclear single quantum coherence (HSQC), total correlated spectroscopy (TOCSY), and heteronuclear multiple bond correlation (HMBC) were used for assigning the structure of the copolymers.     

Poly[2,7‐(9,9‐dihexylfluorene)‐alt‐pyridine] with donor‐acceptor architectures: A new series of blue‐light‐emitting alternating copolymers

A novel series of well‐defined alternating poly[2,7‐(9,9‐dihexylfluorenyl)‐alt‐pyridinyl] (PDHFP) with donor‐acceptor repeat units were synthesized using palladium (0)‐catalyzed Suzuki cross‐coupling reactions in good to high yields. In this series of alternating polymers, 2, 7‐(9,9‐dihexylfluorenyl) was used as the light emitting unit, and the electron deficient pyridinyl unit was employed to provide improved electron transportation. These polymers were characterized by ¹H‐NMR and ¹³C‐NMR, gel permeation chromatography (GPC), thermal analyses, and UV‐vis and fluorescence spectroscopy. The glass transition temperature of copolymers in nitrogen ranged from 110 to 148 °C, and the copolymers showed high thermal stabilities with high decomposition temperatures in the range of 350 to 390 °C in air. The difference in linkage position of pyridinyl unit in the polymer backbone has significant effects on the electronic and optical properties of polymers in solution and in film phases. Meta‐linkage (3,5‐ and 2,6‐linkage) of pyridinyl units in the polymer backbone is more favorable to polymer for pure blue emission and prevention of aggregation of polymer chain than para‐linkage (2,5‐linkage) of the pyridinyl units. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4792–4801, 2004     

Photo-thermal properties of poly(4-tert-butoxycarbonyloxystyrene) bearing imino sulfonate units

Copolymers of 4-tert-butoxycarbonyloxystyrene (BOS) and 9-fluorenilideneimino p-styrenesulfonate (FISS) were synthesized. FISS units in copolymers became p-styrenesulfonic acid units upon ultraviolet irradiation. The irradiated copolymers thermally decomposed to poly(hydroxystyrene) by liberating tert-butoxycarbonyl (BOC) units at temperatures where the unirradiated copolymers were stable. The thermal decomposition of the copolymers catalyzed by sulfonic acid formed photochemically was studied by thermogravimetry. The pseudo first-order rate constant (k) and the activation energy for the acid catalyzed thermal decomposition of BOC units in copolymers were evaluated. The thermolysis of the irradiated copolymer system was compared with that of the irradiated blended system of poly(4-tert-butoxycarbonyloxystyrene) (PBOCST) and 9-fluorenilideneimino p-toluene-sulfonate (FITS). © 1993 John Wiley & Sons, Inc.     

Hydrolytic degradation of copolymers based on l-lactic acid and bis-2-hydroxyethyl terephthalate

The current demand for environmentally degradable copolymers has led to the use of novel degradable copolyesters. A series of copolyesters based on bis-2-hydroxyethyl terephthalate and l-lactic acid oligomers were synthesized by melt polycondensation [Olewnik E, Czerwiński W, Nowaczyk J, Sepulchre M-O, Tessier M, Salhi S, et al. Synthesis and structural study of copolymers of l-lactic acid and bis(2-hydroxyethyl terephthalate). Eur Polym J, in press]. Hydrolytic degradation of copolymers containing 16.8-52.9 mole ratio of l-lactic acid units was carried out in two buffered solutions at two different temperatures: phosphate buffer solution (pH 7.40) at 45 °C and phosphate-citric buffer solution (pH 7.35) at 60 °C. Degradation of copolyesters was studied by incubating samples in powder form in a concentrated solution from 30 to 180 days.The copolymers were characterized by various analytical techniques. The thermal properties, morphology and structural changes during controlled hydrolysis were studied by scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) for determining melting points, heats of melting and decomposition temperatures of investigated copolyesters. ¹H NMR spectroscopy was used to observe the decomposition of the polyesters.     

The influence of chain rigidity on the thermal properties of some novel random copolyethersulfones

Some random low molar mass (M_n ≈ 9000 g mol⁻¹) poly(ethersulfoneethersulfone)/poly(ethersulfoneethersulfonebiphenylsulfone) P(ESES)/P(ESESBS) copolymers, with various (25%, 50% and 75%) ESESBS units contents, were synthesized to obtain compounds with higher chain rigidity than PES. The thermal characterization of the prepared copolymers, as well as that of corresponding P(ESES) and P(ESESBS) homopolymers, was performed, and all investigated parameters showed strong dependence on polymer composition.The glass transition temperature (T_g) was calorimetrically determined by DSC technique, and the obtained values increased linearly as function of ESESBS units percentage, thus indicating an increasing chain rigidity.Degradations were carried out in dynamic heating conditions, from 35 °C to 700 °C, in both flowing nitrogen and static air atmosphere, and the characteristic parameters of degradation were determined in order to draw useful information about the overall thermal stability of the studied compounds. The apparent activation energy of degradation (E_a) was obtained by the Kissinger method, and the values found increased linearly as a function of ESESBS content, while the temperature values at 5% mass loss (T_5%) showed an opposite linear trend. The results are discussed and interpreted.     

Synthesis and thermal properties of polydimethylsiloxanes modified by decyl and methylundecylenate substituents

A series of polydimethylsiloxanes modified by long-chain hydrocarbon substituents, including those containing terminal ester groups, was synthesized. The structures of the copolymers were confirmed by the data of ¹H and ²⁹Si NMR spectroscopy. The thermal properties of the copolymers were studied by differential scanning calorimetry. The change in the behavior of the copolymers is observed at the content of modifying units is >5 mol.% and the fluidity of the polymers is retained at the content of these units <15 mol.%.     

Synthesis of a soluble pyrrole copolymer with phenetidine

A new series of copolymers was synthesized through the oxidative polymerization of pyrrole (PY) and o‐phenetidine (PHT) with inorganic oxidants in acidic media. The polymerization parameters including the mixing method of the oxidant with the comonomer, the comonomer ratio, the time, the temperature, the oxidant, the organic medium, and the acid were systematically optimized for the synthesis of copolymers with high yields, intrinsic viscosities, and solubility. The resultant copolymers were characterized by elemental analysis, infrared, ultraviolet–visible, solution high‐resolution ¹H NMR and solid‐state high‐resolution ¹³C NMR, circular dichroism spectroscopy, and cyclic voltammetry. The results showed that the PY observed content in the copolymers was much higher than the PY feed content. The regular variation of the polymerization yield, intrinsic viscosity, solubility, macromolecular structure, and electroactivity of the resulting polymers with the comonomer ratio, together with the complete solubility of a PY/PHT (10/90) polymer in highly polar solvents, indicated the formation of real random copolymers containing both PY and PHT units rather than a mixture of two homopolymers. However, the polymers containing more than 59 mol % PY were not homogeneous copolymers consisting of soluble and insoluble parts. A semiquantitative relationship between the polymerization yield or solubility of the copolymers and the polarity index of the organic solvents was examined. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2073–2092, 2004     

Synthesis,morphology, and nonisothermal crystallization behavior of poly(trimethylene terephthalate)/poly(propylene glycol) segmented random copolymers

Poly(trimethylene terephthalate)/poly(propylene glycol) (PTT/PPG) segmented random copolymers were synthesized by melt copolycondensation. The weight fraction of PPG blocks was ranged from 12.1 to 33.4 wt%, which was confirmed by ¹H NMR spectroscopy. The result of wide‐angle X‐ray diffractometer indicated that all copolymers had the same crystal structure of PTT homopolymer at room temperature. At a determined crystallization temperature, ring‐banded spherulites could be observed in all copolymers samples, and the band spacing increased with the increase of PPG content. Morphologies of copolymers after nonisothermal crystallization process were strongly depended on the cooling rate. Well‐defined ring‐banded spherulites can be observed only at moderate cooling (20°C/min), while it was really hard to be observed at too low (2.5°C/min) or too high (by air‐quenching) cooling rate. Moreover, the size of spherulites decreased with the increase of cooling rate. Finally, different nonisothermal crystallization kinetics were adopt to analyze this copolymer system, and only the Mo method was suitable to describe this copolymer system. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis and characterization of novel biodegradable copolyesters by transreaction of poly(ethylene terephthalate) with copoly(succinic anhydride/ethylene oxide)

Poly(ethylene terephthalate)/copoly(succinic anhydride/ethylene oxide) copolymers, (PET/PES copolymers) were synthesized by the transreaction between PET and PES and characterized with GPC, ¹H NMR, and DSC. Most of the copolymers obtained were random copolymers. The films cast of these copolymers were transparent. The thermal, mechanical properties, and biodegradability of the copolymers obtained were studied with respect to the composition and lengths of aliphatic and aromatic units in the copolymers. In the copolymers having high PET content, the melting points, due to the PET segment, were observed by DSC measurement, although the fusion heats of the copolymers were small. The enzymatic hydrolyzability by a lipase from Rhizopus arrhizus and biodegradability by activated sludge of the copolymers decreased with an increase in PET content. When the length of succinic acid unit in the copolymer was below 2, the hydrolyzability of the copolymers decreased considerably. The tensile strengths of the cast films prepared from the copolymers synthesized by the transreaction increased with an increase in PET content, whereas, the elongations at break decreased. Their tensile strengths were half, and the elongations were double compared to those of PET homopolymer film. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4478–4489, 2000     

Synthesis,characterization, and thermal degradation mechanism of fast biodegradable PPSu/PCL copolymers

Poly(propylene succinate)/poly(ε‐caprolactone) (PPSu/PCL) 25/75, 50/50, and 75/25 w/w copolymers were prepared using a combination of polycondensation and ring opening polymerization. The randomness of copolymers was characterized using ¹H NMR and ¹³C NMR spectroscopy. From molecular weights and DSC measurements it was observed that the molecular weight decreased with increasing the wt % content of PPSu, while the copolymers containing 50 and 75 wt % PPSu were completely amorphous. Enzymatic hydrolysis revealed that biodegradation rate was much enhanced compared with that of neat PCL and increased by increasing the PPSu content. From TGA analysis it was also found that the PPSu/PCL copolymers had similar thermal decomposition behaviour with the pure polyesters and exhibited their maximum decomposition rates at temperatures 400–420 °C. Two different mechanisms, which follow each other, were used to adequately describe their decomposition kinetics. The first one corresponded to the first stage taking place at 280–365 °C, where small mass loss was recorded and activation energies ranged between 94 and 156 kJ/mol. The second one took place at 370–460 °C and corresponded to the stage where the main polyester mass was decomposed. The activation energies for this stage ranged between 200 and 240 kJ/mol. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5076–5090, 2007     

Novel Copolymers of 2-Phenyl-1,1-dicyanoethylene with 4-Fluoro- and Pentafluorostyrene

Copolymerization of 2-phenyl-1,1-dicyanoethylene (PDE) with 4-fluorostyrene and pentafluorostyrene in solution with radical initiation (ABCN) at 70°C yielded random copolymers with PDE alternating units. The composition of the copolymers was calculated from nitrogen analysis and the structure was analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r₁) and the tendency toward alternation of monomer units in the copolymer for these two monomers, is 4-fluorostyrene (1.96) > pentafluorostyrene (0.51). Higher glass transition temperature of the copolymers in comparison with that of homopolymers indicates a decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit.     

Studies on the effect of different levels of toughener and flame retardants on thermal stability of epoxy resin

A thermoplastic toughener, polyether sulphone (PES) and a number of different types of flame retardants were blended in different ratios with a commercial epoxy resin triglycidyl-p-aminophenol (TGAP) and 4,4-diamino diphenyl sulphone (DDS) a curing agent. The effect of type and levels of flame retardants (FR) and the toughening agent on the curing, thermal decomposition and char oxidation behaviour of the epoxy resin was studied by the simultaneous differential thermal analysis and thermogravimetric techniques. It was observed that the toughener slightly increases the curing temperature (by up to 20 °C) but had minimal effect on the decomposition temperature of the resin. Flame retardants, however affected all stages depending upon the type of flame retardant used. The curing peak for samples containing tougher and flame retardants although slightly changed depending upon the type of FR, was not more than ± 20 °C compared to that of samples containing toughener only. All flame retardants lowered the decomposition temperature of the epoxy resin. Phosphorus- and nitrogen-containing flame retardants reduced the char oxidation leading to more residual char, whereas halogen- containing flame retardants had less effect on this stage.     

Thermal decomposition products of copoly(arylene ether sulfone)s characterized by direct pyrolysis mass spectrometry

Pyrolysis products with mass of up to 850 Da were detected by direct pyrolysis mass spectrometric (DPMS) analysis of a series of copoly(arylene ether sulfone)s (PES-PPO) synthesized by nucleophilic condensation of either 4,4′-dichlorodiphenylsulfone (CDPS) or 4,4′-bis-(4-chlorophenyl sulfonyl) biphenyl (long chain dichloride, LCDC) with different molar ratios of hydroquinone (HQ) or dihydroxydiphenylsulfone (HDPS). Pyrolysis products retaining the repeating units of the initial copolymers were formed at temperatures ranging from 420 °C to 470 °C (near the initial decomposition temperature). At temperatures higher than 450 °C were observed products containing biphenyl units, formed by the elimination process of SO₂ from diphenyl sulfone bridges. Products having biphenyl and dibenzofuran moieties were detected in the mass spectra recorded at temperatures above 550 °C. These units were formed by loss of hydrogen atom from diphenyl ether bridges. Although the EI (18 eV) mass spectra of the pyrolysis products of the samples investigated were very similar, it was found that the relative intensity of some ions reflects the molar composition of the copolymers analysed. Cyclic and linear oligomers with very low molecular mass, present in the crude copolymers, were also detected by DPMS. Thermogravimetric analysis also showed their excellent thermal stability below 400 °C. It indicates that the copolymers yield a char residue of 40-45% at 800 °C, which increases with the PPO mole fraction in the samples.     

Synthesis,Electrical, Electronic and Charge Transport Properties of Poly(aniline‐co‐p‐toluidine)

Copolymers of aniline with p‐toluidine were synthesized for different molar ratios of the respective monomers in acid medium. The electrical conductivity, charge transport and spectral characteristics upon incorporation of p‐toluidine units into the polyaniline backbone were investigated. The electrical conductivity of the copolymers showed frequency dependence which became more prominent with an increase in the number of p‐toluidine units in the polyaniline backbone. A direct relationship between the frequency dependence and electron localization was observed in the copolymers. Electronic spectra showed blue shifts in the π→π*and benzenoid→quinoid transitions revealing a decrease in the extent of conjugation in the copolymers. The protonated forms of the copolymers were soluble in DMSO giving polaron band around 400 nm. The decrease in electrical conductivity was attributed to the greater electron localizations as revealed from the broader ESR signals. Temperature dependence of electrical conductivity showed that charge transport was mainly through variable range hopping though a mixed conduction behavior was observed at higher temperature range.     

Low band gap copolymers based on thiophene and quinoxaline: Their electronic energy levels and photovoltaic application

Low band gap conjugated copolymers containing donor (thiophene)‐acceptor (quinoxaline, Qx ) were synthesized via Stille coupling polymerization. The resulting copolymers were characterized by ¹H NMR, element analysis, GPC, TGA, and DSC. UV‐vis spectra indicated that the increase in the content of quinoxaline units increased the interaction strengthen of the polymer main chains and caused a red‐shift in the optical absorbance. Cyclic voltammetry was used to estimate energy levels of the lowest unoccupied molecular orbit (LUMO) and the highest occupied molecular orbit (HOMO), and the band gap (E_g) of the copolymers. The basic electronic structures of the copolymers were also studied by density‐functional theory (DFT) calculations. Both the experimental and calculation results indicated an increase in the HOMO energy level with increasing the content of quinoxaline units, whereas the corresponding change in the LUMO energy level is much smaller. Polymer photovoltaic cells (PVCs) were fabricated with the structure of ITO/PEDOT:PSS (30 nm)/active layer (80 nm)/Ca (8 nm)/Al(140 nm). The results show that the introduction of a proper amount of electron‐acceptor groups in the polymer main chains induces an extension of the absorption spectra and improves the photovoltaic properties of the copolymers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3399–3408, 2009     

Redox polymerization process: An efficient tool for the synthesis of block copolymers

The synthesis of poly(acrylonitrile)-block-poly-(ethylene glycol)-block-poly(acrylonitrile) copolymers has been carried out using a redox system consisting of ceric ion and poly(ethylene glycol)s of various molecular weights in aqueous medium. The generation of intermediate radicals in the redox process has been confirmed by ESR spectroscopy and the polymerization progressing through ‘blocking from’ mechanism has been postulated. The formation of the block copolymers has been confirmed by chemical tests and fractional precipitation technique as well as by FT-IR and FT-NMR [¹H and ¹³C–(¹H)] spectroscopic techniques. The triblock nature of the block copolymers has been ascertained through the cleavage of ether linkage of the PEG segment. TG/DTA studies of the block copolymers with PEG molecular weights of 1000 and above revealed two-stage decomposition, while their DSC traces exhibited a shift in the melting peak of PEG. GPC investigations of the block copolymers manifested a high homogeneity with unimodal distribution of molecular weights. SEM studies indicated significant changes in the morphological characteristics of the block copolymers. © 1995 John Wiley & Sons, Inc.     

Probing the micellization of diblock and triblock copolymers of poly(<Emphasis Type="SmallCaps">l</Emphasis>-lactide) and poly(ethylene glycol) in aqueous and NaCl salt solutions

The micelle formation of a series of amphiphilic block copolymers in aqueous and NaCl solutions was studied by a fluorescent probe technique using pyrene as a "model drug". These copolymers were synthesized from poly (ethylene glycol) (PEG) and l-lactide by a new calcium ammoniate catalyst. They had fixed PEG block lengths (44, 104 or 113 ethylene oxide units) and various poly(l-lactide) (PLLA) block lengths (15–280 lactide units). The critical micelle concentration (cmc) was found to decrease with increasing PLLA content. The distinct dissimilarity of the cmc values of diblock and triblock copolymers based on the same block length of PEG provided evidence for the different configurations of their micelles. It was also observed that the introduction of NaCl salt significantly contributed to a decrease in the cmcs of the copolymers with short PEG and PLLA blocks, while it had less influence on the cmcs of copolymers with long PEG or PLLA blocks. The dependence of partition coefficients ranging from 0.2×10⁵ to 1.9×10⁵ on the PLLA content in the copolymer and on the micelle configuration was also discussed. The contribution of NaCl salt to increasing the partition of pyrene into a micellar phase was observed.     

Ion conductive poly(ethylene oxide-dimethyl siloxane) copolymers

A series of poly(ethylene oxide-dimethyl siloxane) copolymers, — [SiMe₂O(CH₂CH₂O)_n]_m — (n = 2, 3, 4, 5, 6.4, 8.7, 13.3), were synthesised by the reaction of polyethylene glycol with dimethyl dimethoxy/diethoxysilane. Corresponding ion-conductive polymers were prepared by complexing these copolymers with salts (sodium tetrafluoroborate or ammonium adipate). The highest conductivity of these systems at room temperature was 3 × 10⁻⁴ S cm⁻¹ and 6 × 10⁻⁵ S cm⁻¹, respectively. The glass transition temperature of these copolymers is reported and is seen to be dependent on the length of the ether units. The effects of siloxane content, salt concentration, and temperature on the conductivity are discussed. © 1996 John Wiley & Sons, Inc.     

Thermal behaviour of binary and ternary copolymers containing acrylonitrile

Three types of acrylonitrile copolymers (acrylonitrile-styrene-butadiene copolymer (ABS¹), acrylonitrile-styrene random copolymer (SAN²) and acrylonitrile-butadiene random copolymer (BAN³) were studied by thermogravimetry (TG/DTG⁴) and by pyrolysis in a semi-batch process at 450 °C in order to find structure–thermal behaviour relationships. The overlapped thermo-oxidative degradation processes were separated and the corresponding kinetic parameters were calculated. The TG/DTG studies have evidenced that the styrene-acrylonitrile interactions stabilize the nitrile groups reacting by chain scission rather than cyclization and destabilize the styrene units. Also, the cyclization of the acrylonitrile units in ABS is favoured by interactions with the styrene and butadiene units. The pyrolysis behaviour evidenced that the styrene-acrylonitrile interactions in SAN and ABS lead to the formation of 4-phenylbutyronitrile as the most important decomposition compound. ABS shows similar composition of the degradation oil with SAN copolymer therefore in the ABS the styrene-butadiene interactions are less important than those between styrene and acrylonitrile units.