1,10-Phenanthrolinium ionic liquid crystals

The 1,10-phenanthrolinium cation is introduced as a new building block for the design of ionic liquid crystals. 1,10-Phenanthroline, 5-methyl-1,10-phenanthroline, 5-chloro-1,10-phenanthroline, and 4,7-diphenyl-1,10-phenanthroline were quaternized by reaction with 1,3-dibromopropane or 1,2-dibromoethane. The resulting cations were combined with dodecyl sulfate or dioctyl sulfosuccinate anions. The influence of both the cation and anion type on the thermal behavior was investigated. Several of the complexes exhibit mesomorphic behavior, with smectic E phases for the dodecyl sulfate salts and smectic A phases for the dioctyl sulfosuccinate salts. Structural models for the packing of the 1,10-phenanthrolinium and anionic moieties in the liquid-crystalline phases are presented. The ionic compounds show fluorescence in the solid state and in solution.     

Transition metal complex cations as reagents for gas-phase transformation of multiply deprotonated polypeptides

Triply deprotonated DGAILDGAILD was reacted in the gas-phase with doubly charged copper, cobalt, and iron metal complexes containing either two or three phenanthroline ligands. Reaction products result from two major pathways. The first pathway involves the transfer of an electron from the negatively charged peptide to the transition-metal complex. The other major pathway consists of the displacement of the phenanthroline ligands by the peptide resulting in the incorporation of the transition-metal into the peptide to form [M − 3H + X^II]⁻ ions, where X is Cu, Co, or Fe, respectively. The extent to which each pathway contributes is dependent on the nature of transition-metal complex. In general, bis-phen complexes result in more electron-transfer than the tris—phen complexes, while the tris—phen complexes result in more metal insertion. The metal in the complex plays a large role as well, with the Cu containing complexes giving rise to more electron transfer than the corresponding complexes of Co and Fe. The results show that a single reagent solution can be used to achieve two distinct sets of products (i.e., electron-transfer products and metal insertion products). These results constitute the demonstration of novel means for the gas-phase transformation of peptide anions from one ion type to another via ion/ion reactions using reagents formed via electrospray ionization.     

Self-motion of a phenanthroline disk on divalent metal ion aqueous solutions coupled with complex formation

The self-motion of a 1,10-phenanthroline disk on divalent metal ion aqueous solutions was investigated as a simple autonomous motor coupled with complex formation. The characteristic features of motion (continuous and oscillatory motion) and their concentration regions differed among metal ions, and the frequency of oscillatory motion depended on the temperature of the aqueous solution. The nature of the characteristic motion is discussed in relation to the stability constant of complex formation between phenanthroline and a metal ion, and the difference in surface tension between phenanthroline and its metal complex as the driving force.     

Thermochromism of metal ion complexes of semiquinone radical anions. Control of equilibria between diamagnetic and paramagnetic species by Lewis acids

Metal ion complexes of semiquinone radical anions exhibit different types of thermochromism depending on metal ions and quinones. Metal ion complexes of 1,10-phenanthroline-5,6-dione radical anion (PTQ(.-)) produced by the electron-transfer reduction of PTQ by 1,1'-dimethylferrocene (Me(2)Fc) in the presence of metal ions (Mg(2+) and Sc(3+)) exhibit the color change depending on temperature, accompanied by the concomitant change in the ESR signal intensity. In the case of Mg(2+), electron transfer from Me(2)Fc to PTQ is in equilibrium, when the concentration of the PTQ(.-)-Mg(2+) complex (lambda(max) = 486 nm) increases with increasing temperature because of the positive enthalpy for the electron-transfer equilibrium. In contrast to the case of Mg(2+), electron transfer from Me(2)Fc to PTQ is complete in the presence of Sc(3+), which is a much stronger Lewis acid than Mg(2+), to produce the PTQ(.-)-Sc(3+) complex (lambda(max) = 631 nm). This complex is in disproportionation equilibrium and the concentration of the PTQ(.-)-Sc(3+) complex increases with decreasing temperature because of the negative enthalpy for the proportionation direction, resulting in the remarkable color change in the visible region. On the other hand, the p-benzosemiquinone radical anion (Q(.-)) forms a 2:2 pi-dimer radical anion complex [Q(.-)-(Sc(3+))(2)-Q] with Q and Sc(3+) ions at 298 K (yellow color), which is converted to a 2:3 pi-dimer radical anion complex [Q(.-)-(Sc(3+))(3)-Q] with a strong absorption band at lambda(max) = 604 nm (blue color) when the temperature is lowered to 203 K. The change in the number of binding Sc(3+) ions depending on temperature also results in the remarkable color change, associated with the change in the ESR spectra.     

Phenanthroline complexes bearing fused dipyrrolylquinoxaline anion recognition sites: efficient fluoride anion receptors

Novel anion recognition host molecules, tris-1,10-phenanthroline cobalt(III) and bis-2,2'-bipyridine mono-1,10-phenanthroline ruthenium(II) complexes bearing fused dipyrrolylquinoxaline moieties have been synthesized. As determined by UV-vis spectroscopic and electrochemical studies, these metal complexes bind fluoride with high affinity in polar media both in absolute terms and relative to the metal-free phenanthroline dipyrrolylquinozaline precursor from which they are derived (fluoride is bound to the tris-1,10-phenanthroline cobalt(III) dipyrrolylquinoxaline system with a 1:1 binding constant of 54 000 M-1 in DMSO). The large observed binding constants are ascribed to two factors, (i) the presence of a phenanthroline-coordinated cationic charge that decreases the electron density on the pyrrole NH protons and (ii) pure electrostatic effects.     

Synthesis and crystal structure of aquachlorobis(1,10-phenanthroline)manganese(II) nitrobenzoate trihydrate

The title compound has been prepared and its crystal structure determined by X-ray diffraction methods. The complex salt consists of Mn(II) complex cations, benzoate anions and lattice water molecules. Mn(II) assumes a distorted octahedral geometry defined by two 1,10-phenanthroline (phen) ligands, a Cl^? ion and a water molecule. A comparison of bond distances and bond angles suggests electrostatic interaction between Mn(II) and coordinated N atoms. The nitrobenzoate anion does not coordinate to the Mn atom but links with the complex cation via O?H···O hydrogen bonds. Aromatic stacking occurs between phen rings and between phen and benzoate.     

Detection of metal ions using ion-channel sensor based on self-assembled monolayer of thioctic acid

Gold electrodes were chemically modified with thioctic acid monolayer designed to mimic biological ion-channel membranes. The technique was then used in the determination of alkali, alkaline earth, thallium(I), and lanthanum metal cations as analytes. Cyclic voltammograms (CV) of [Fe(CN)6]³⁻ an electroactive marker, were measured in the presence of the various types of analyte cations. In the absence of the analyte cation, electrostatic repulsion between the marker anions and the carboxylate groups of the receptor monolayer hindered the approach of the marker anion to the electrode surface and hence hindered its reduction. The modified electrodes responded well to the metal cations except the alkali metal cations. The sensors could detect the trivalent cation La³⁺ at concentrations as low as 10⁻⁸ M. The response of the sensor to the metal cations increase in the order alkali metal3+ can be discriminated in the ratio 1:100. This makes it possible to determine the trivalent ion in a sample matrix containing monovalent and divalent cations. Thallium(I) ion showed marked deviation in its response as compared to monovalent ions of the alkali metals. The ion-channel sensor based on self-assembled monolayer of thioctic acid therefore offers a potential alternative technique for the selective determination of metal ions.     

Simultaneous separation and detection of anions and cations in ion chromatography

An overview of new possibilities for the simultaneous determination of anions and cations by ion chromatography is presented. A short comparison of the characteristics of separation and detection methods for simultaneous anion–cation determinations of ions is given and applications are discussed.     

Luminescent rhenium(I) complexes with acetylamino- and trifluoroacetylamino-containing phenanthroline ligands: anion-sensing study

A series of rhenium complexes with acetylamino- and trifluoroacetylamino-containing 1,10-phenanthroline ligands have been synthesized, characterized and their photophysical and electrochemical properties studied. These complexes were found to show significant UV-vis and emission changes on addition of CN(-), F(-) and AcO(-) anions. Their reactivity towards CN(-), F(-) and AcO(-) anions, was also investigated by UV-vis, emission and (1)H NMR spectroscopy. The reaction product between the trifluoroacetylamino-containing 1,10-phenanthroline ligand and the CN(-) anion has also been structurally characterized by X-ray crystallography.     

Magnetic properties and molecular structures of binuclear (2-pyrazinecarboxylate)-bridged complexes containing Re(IV) and M(II) (M = Co, Ni)

Three novel Re(iv) compounds, the mononuclear complex Bu(4)N[ReBr(5)(Hpyzc)] (1) and the heterobimetallic complexes [ReBr(5)(mu-pyzc)M(dmphen)(2)].2CH(3)CN [M = Co (2), Ni (3)] (Hpyzc = 2-pyrazinecarboxylic acid, dmphen = 2,9-dimethyl-1,10-phenanthroline), have been synthesized and their crystal structures determined by single-crystal X-ray diffraction. The structure of 1 consists of [ReBr(5)(Hpyzc)](-) complex anions and tetrabutylammonium cations, Bu(4)N(+). The Re(iv) is surrounded by five bromide anions and a N-donor Hpyzc monodentate ligand, in a distorted octahedral environment. The structures of 2 and 3 consist of dinuclear units [ReBr(5)(mu-pyzc)M(dmphen)(2)], with the metal ions linked by a pyzc bridge ligand, being bidentate toward M(II) and monodentate toward Re(IV). The environment of Re(IV) is the same as in 1, whereas M(II) is six-coordinate, being surrounded by four nitrogen atoms of two bidentate dmphen ligands and one oxygen atom and one nitrogen atom of the pyzc anion. The magnetic properties of 1-3 were investigated in the temperature range 2.0-300 K. 1 shows the expected magnetic behavior for a mononuclear Re(IV) complex with a weak intermolecular antiferromagnetic coupling at low temperatures. The bimetallic complexes exhibit an intramolecular ferromagnetic coupling between Re(IV) and the M(II) ion (Co, Ni).     

A New Spectrophotometry Determination of Cyanide by Solvent Extraction as Tris-(1,10-Phenanthroline)-Iron (II)-Thiocymate

Abstract

By shaking aqueous cyanide solution with nitrobenzene contained sulfur, thiocyanate is formed and is extracted into the nitrobenzene as an ion pair of thiocyanate anion and tris-(1,10-phenanthroline)-iron(II) chelate cation. By measuring the color intensity of the organic phase at 516 nm, cyanide is determined spectrophotometrically. A linear calibration curve is obtained up to 4 × 10^?5M of cyanide in the aqueous phase.     

Oligoether-strapped calix[4]pyrrole: an ion-pair receptor displaying cation-dependent chloride anion transport

A ditopic ion-pair receptor (1), which has tunable cation- and anion-binding sites, has been synthesized and characterized. Spectroscopic analyses provide support for the conclusion that receptor 1 binds fluoride and chloride anions strongly and forms stable 1:1 complexes ([1·F](-) and [1·Cl](-)) with appropriately chosen salts of these anions in acetonitrile. When the anion complexes of 1 were treated with alkali metal ions (Li(+), Na(+), K(+), Cs(+), as their perchlorate salts), ion-dependent interactions were observed that were found to depend on both the choice of added cation and the initially complexed anion. In the case of [1·F](-), no appreciable interaction with the K(+) ion was seen. On the other hand, when this complex was treated with Li(+) or Na(+) ions, decomplexation of the bound fluoride anion was observed. In contrast to what was seen with Li(+), Na(+), K(+), treating [1·F](-) with Cs(+) ions gave rise to a stable, host-separated ion-pair complex, [F·1·Cs], which contains the Cs(+) ion bound in the cup-like portion of the calix[4]pyrrole. Different complexation behavior was seen in the case of the chloride complex, [1·Cl](-). Here, no appreciable interaction was observed with Na(+) or K(+). In contrast, treating with Li(+) produces a tight ion-pair complex, [1·Li·Cl], in which the cation is bound to the crown moiety. In analogy to what was seen for [1·F](-), treatment of [1·Cl](-) with Cs(+) ions gives rise to a host-separated ion-pair complex, [Cl·1·Cs], in which the cation is bound to the cup of the calix[4]pyrrole. As inferred from liposomal model membrane transport studies, system 1 can act as an effective carrier for several chloride anion salts of Group 1 cations, operating through both symport (chloride+cation co-transport) and antiport (nitrate-for-chloride exchange) mechanisms. This transport behavior stands in contrast to what is seen for simple octamethylcalix[4]pyrrole, which acts as an effective carrier for cesium chloride but does not operates through a nitrate-for-chloride anion exchange mechanism.     

Performance of ion chromatography in the determination of anions and cations in various natural waters with elevated mineralization

The performance of ion chromatography in the determination of anions and cations in natural mineral waters of different composition and different total mineralization was evaluated. Up to 12 ions of the 20 usually included in extended chemical analysis of natural waters were successfully determined by ion chromatography alone. At least 98.60% and up to 99.96% of total cation composition of mineral waters was determined by ion chromatography. Hydrogen carbonate predominated in anion composition of mineral waters and was determined titrimetrically. The percentage of anions determined by ion chromatography in the remaining anion composition of mineral waters was between 98.90% and 99.96%. The agreement between total concentrations of anions and cations in individual mineral waters determined predominantly by ion chromatography is very good and the performance of ion chromatography for the basic and for the extended chemical analysis of highly mineralized water samples is very high. Method development was assisted by previously developed algorithms and appropriate experimental conditions are also discussed.     

对羟基苯乙酸铜(Ⅱ)、锌(Ⅱ)配位聚合物的合成、晶体结构及与DNA作用

合成了两种过渡金属配合物[M(HPAA)(phen)2]HPAA.7H2O(M=Zn,1;Cu,2;HPAA-=对羟基苯乙酸根;phen=1,10-邻菲啰啉),并通过元素分析、红外光谱、热重分析对其进行表征,用单晶X-射线衍射方法测定了配合物的晶体结构。结构分析显示,两种配合物属于异质同晶型,不对称单元都是由1个金属离子,2个对羟基苯乙酸根离子,2个邻菲啰啉分子和7个游离的水分子组成的,其中有1个对羟基苯乙酸根离子未参与配位。每个金属离子的配位数为6,处于扭曲的八面体配位环境中。另外,用荧光光谱法研究了两种配合物与DNA之间的相互作用。     

Retention behavior of ions in high performance ion chromatography: III effect of the nature of the cation on anion retention

The affects of alkali metal cations on the retention behavior of halide ions has been investigated. In general, the retention times of the anions were found to decrease as the size of the metal ion increased, although an inversion was observed for the rubidium and cesium ions. A similar inversion has been reported for calculated anion polarizabilities.     

Thermodynamic properties of the solvent extraction of ion pairs of metal chelate cations with some anions

Thermodynamic quantities were determined for the extraction of ion pairs of tris(1,10-phenanthroline)iron(II) and tris(2,2'-bipyridine)iron(II) chelate cations with halide, pseudohalide and polythionate anions from aqueous phase into nitrobenzene. Ion pairs with larger anions have more negative enthalpy changes with higher extractability. No clear trend was observed for the entropy changes. Linear relationships were observed between the free energy changes and the reciprocal radii of monovalent counter anions.     

Mechanistic studies on the separation of cations in zwitterionic ion chromatography

Electrostatic ion chromatography, also known as zwitterionic ion chromatography, has been predominantly used for the analysis of anions. Consequently, separation mechanisms proposed for this technique have been based on anion retention data obtained using a sulfobetaine-type surfactant-coated column. A comprehensive cation retention data set has been obtained on a C18 column coated with the zwitterionic surfactant N-tetradecylphosphocholine (which has the negatively and positively charged functional groups reversed in comparison to the sulfobetaine surfactants), with mobile phases being varied systematically in the concentration and species of both the mobile-phase anion and cation. A retention mechanism based on both an ion exclusion effect and a direct (chaotropic) interaction with the inner negative charge on the zwitterion is proposed for the retention of cations. Despite the relatively low chaotropic nature of cations compared with anions, the retention data shows that cations are retained in this system predominantly due to a chaotropic interaction with the inner charge, analogous to anions in a system where the C18 column is coated with a sulfobetaine-type surfactant. The retention of an analyte cation, and the effect of the mobile-phase anion and cation, can be predicted by the relative positions of these species on the Hofmeister (chaotropic) series.     

Effects of metal ions on physicochemical properties and redox reactivity of phenolates and phenoxyl radicals: mechanistic insight into hydrogen atom abstraction by phenoxyl radical-metal complexes.

Phenolate and phenoxyl radical complexes of a series of alkaline earth metal ions as well as monovalent cations such as Na+ and K+ have been prepared by using 2,4-di-tert-butyl-6-(1,4,7,10-tetraoxa-13-aza-cyclopentadec-13-ylmethyl)phenol (L1H) and 2,4-di-tert-butyl-6-(1,4,7,10,13-pentaoxa-16-aza-cyclooctadec-16-ylmethyl)phenol (L2H) to examine the effects of the cations on the structure, physicochemical properties and redox reactivity of the phenolate and phenoxyl radical complexes. Crystal structures of the Mg2+- and Ca2+-complexes of L1- as well as the Ca2+- and Sr2+-complexes of L2- were determined by X-ray crystallographic analysis, showing that the crown ether rings in the Ca2+-complexes are significantly distorted from planarity, whereas those in the Mg2+- and Sr2+-complexes are fairly flat. The spectral features (UV-vis) as well as the redox potentials of the phenolate complexes are also influenced by the metal ions, depending on the Lewis acidity of the metal ions. The phenoxyl radical complexes are successfully generated in situ by the oxidation of the phenolate complexes with (NH4)(2)[Ce4+(NO3)6] (CAN). They exhibited strong absorption bands around 400 nm together with a broad one around 600-900 nm, the latter of which is also affected by the metal ions. The phenoxyl radical-metal complexes are characterized by resonance Raman, ESI-MS, and ESR spectra, and the metal ion effects on those spectroscopic features are also discussed. Stability and reactivity of the phenoxyl radical-metal complexes are significantly different, depending on the type of metal ions. The disproportionation of the phenoxyl radicals is significantly retarded by the electronic repulsion between the metal cation and a generated organic cation (Ln+), leading to stabilization of the radicals. On the other hand, divalent cations decelerate the rate of hydrogen atom abstraction from 10-methyl-9,10-dihydroacridine (AcrH2) and its 9-substituted derivatives (AcrHR) by the phenoxyl radicals. On the basis of primary kinetic deuterium isotope effects and energetic consideration of the electron-transfer step from AcrH2 to the phenoxyl radical-metal complexes, we propose that the hydrogen atom abstraction by the phenoxyl radical-alkaline earth metal complexes proceeds via electron transfer followed by proton transfer.     

Chemiluminescent flow-through sensor for 1,10-phenanthroline based on the combination of molecular imprinting and chemiluminescence.

A functional polymer for the catalysis of the chemiluminescent reaction and molecular recognition ability of 1,10-phenanthroline was prepared based on the molecular imprinting method. The structural and catalytic roles of transition metal ion interactions were applied in the material design. A ternary complex, 4-vinylpyridine-Cu(II)-1,10-phenanthroline (2:1:1), was synthesized and used as a functional monomer. The ligand 1,10-phenanthroline in the ternary complex was the template used to form the molecularly imprinted polymer. Another monomer, styrene, and the cross-linking reagent divinylbenzene were copolymerized with the ternary complex. The polymer containing the ternary complex is an efficient catalyst for the decomposition of hydrogen peroxide. During the hydrogen peroxide decomposition, superoxide radical ion is formed, which reacts with 1,10-phenanthroline and gives a chemiluminescent emission. The 1,10-phenanthroline was destroyed during the chemiluminescent reaction, leaving a cavity and copper binding sites for another 1,10-phenanthroline molecule. The prepared polymer particles were packed into a glass tube and developed as a molecular recognition chemiluminescent flow-through sensor for 1,10-phenanthroline. The sensitivity and selectivity of the sensor were tested.