Enhanced <Emphasis Type="Italic">αγ</Emphasis>′ Transition of Poly(vinylidene fluoride) by Step Crystallization and Subsequent Annealing

Poly(vinylidene fluoride) (PVDF) exhibits pronounced polymorphs.Its γ phase is attractive due to the electroactive properties.The γ-PVDF is however difficult to obtain under normal crystallization condition.In a previous work,we reported a simple melt-recrystallization approach for producing y-phase rich PVDF thin films through selective melting and subsequent recrystallization.We reported here another approach for promoting the αγ'phase transition to prepare γ-phase rich PVDF thin films.To this end,a stepwise crystallization and subsequent annealing process was used.The idea is based on a quick generation of a large amount of α-PVDF crystals with some of their γ-PVDF counterparts at suitable crystallization temperature and then annealing at a temperature above the crystallization temperature for enhancing the molecular chain mobility to overcome the energy barrier of phase transition.It was found that crystallizing the PVDF melt first at 152 ℃ for4 h,then quenching to room temperature and finally annealing the sample at 160 ℃ for 100 h was the most efficient to produce γ-PVDF rich films.This is related to the melting and recrystallization of the α-PVDF crystals produced during quenching in the annealing process at 160 ℃,which favors the formation of γ-PVDF crystals for triggering the αγ'phase transition.     

Conformational dimorphism of 1,1,3,3,5,5-hexachloro-1,3,5-trigermacyclohexane: solvent-induced crystallization of a metastable polymorph containing boat-shaped molecules

Two crystalline modifications of 1,1,3,3,5,5-hexachloro-1,3,5-trigermacyclohexane have been experimentally obtained as phase pure products and studied by single-crystal X-ray diffraction. The six-membered heterocycles adopt a chair conformation in the alpha-phase; this polymorph is accessible by crystallisation from solution and from the melt. In contrast, the beta-form is built up from boat-shaped molecules; it can exclusively be crystallised from n-hexane. At the molecular level, formation energies of the 1,1,3,3,5,5-hexachloro-1,3,5-trigermacyclohexane conformers have been compared by using molecular mechanics, semiempirical and ab-initio quantum mechanical calculations. Possible reasons for the selective formation of the alpha- or beta-phase in specific solvents have been considered. Formation of the metastable phase is suggested to occur via a hypothetical intermediate of composition [(GeCl2CH2)3].0.5C6H14. For such an in-silico solvate, a crystal structure of favourable lattice energy, closely related to the experimentally observed beta-modification, has been found through global energy minimisation. Elimination of the n-hexane molecules from this computer-generated solid and subsequent simulated annealing resulted in a crystal structure that corresponds to the experimentally observed beta-phase within the limits of the force field calculations. This scenario implies solvent directed crystallisation of a metastable polymorphic molecular crystal.     

Melt crystallization and crystal transition of poly(butylene adipate) revealed by infrared spectroscopy

The structure evolution of poly(butylene adipate) (PBA) during isothermal melt crystallization and phase transition processes is investigated by Fourier transform infrared spectroscopy (FTIR). Detailed IR spectra analysis and band assignment are performed to disclose the bands sensitive to the alpha-form crystalline order of PBA. It is revealed from the in situ IR study that the functionalities within PBA chains alter simultaneously during the melt crystallization process. From the analysis of the spectral changes, it is found that band shifts take place during the phase transition process of PBA from its metastable beta-form crystal to the stable alpha-form. Notable band shifts in the 1300-1100 cm(-1) region indicate that the twist of polymer chains in the alpha-form is located in the C-O-C and C-O linkages. Moreover, the results elucidated that the different segments of molecular chains tune up their conformations synchronously during the beta to alpha crystal transition process of PBA. It is suggested that the betaalpha phase transition process proceeds randomly throughout the solid at a constant rate.     

Enhanced electrical properties of highly oriented poly(vinylidene fluoride) films prepared by solid‐state coextrusion

Oriented poly(vinylidene fluoride) (PVDF) films with β‐form crystals have been commonly prepared by cold drawing of a melt‐quenched film consisting of α‐form crystals. In this study, we have successfully produced highly oriented PVDF thin films (20 µm thick) with β‐crystals and a high crystallinity (55–76%), by solid‐state coextrusion of a gel film to eight times the original length at an established optimum extrusion temperature of 160°C, some 10°C below the melting temperature. The resultant drawn films had a highly oriented (orientation function f_c = 0.993) fibrous structure, showing high mechanical properties of an extensional elastic modulus of 8.3 GPa and tensile strength of 0.84 GPa, along the draw direction. Such highly oriented and crystalline films exhibited excellent ferroelectric and piezoelectric properties. The square hysteresis loop was significantly sharper than that of a conventional sample. The sharp switching transient yielded the remnant polarization P_r of 90 mC/m², and the electromechanical coupling factor k_t was 0.24 at room temperature. These values are about 1.5 times greater than those of a conventional β‐PVDF film. Thus, solid‐state coextrusion near the melting point was found to be a useful technique for the preparation of highly oriented and highly crystalline β‐PVDF films with superior mechanical and electrical properties. The morphology of the extrudate relevant to such properties is discussed. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2549–2556, 1999     

分级聚丙烯的取向结晶过程

聚丙烯熔体在剪切或应变应力作用下 ,分子链发生取向形成伸直链纤维晶 ,这些先取向形成的纤维晶成为其后结晶的晶核 .这种线形排列的特殊自晶核被称作排核 ( Row nuclei) [1] .排核诱导的结晶温度高于异相核和均相核 .折叠链片晶在排核上附生生长 ,形成具有柱状对称性的超分子结构 ,称为柱状晶 ( Cylindrite) [2 ,3] .聚合物的分子量 ,剪切温度和剪切速度等因素对柱状晶的生成有很大影响 [4 ,5] .本文选用不同级分的聚丙烯样品 ,利用高分子 (特别是取向结晶 )的记忆效应 [6,7] ,研究了剪切后薄膜试样在熔融重结晶过程中柱状晶的形成和发展…     

Effect of PVDF characteristics on extruded film morphology and porous membranes feasibility by stretching

Three different polyvinylidene fluoride (PVDF) resins were selected to develop porous membranes through melt extrusion and stretching. The effect of the polymer rheology on chain elongation in the melt state was studied. The possibility of generating a row‐nucleated lamellar crystallization for precursor films was investigated. The arrangement and orientation of the crystalline phase were examined by wide angle X‐ray diffraction (WAXD) and Fourier Transform Infrared Spectroscopy (FTIR). The extrusion conditions and the blend compositions were adjusted to obtain uniform precursor films with appropriate morphology. Annealing, cold and hot stretching were consequently employed to generate and enlarge the pores. It was found that a proper crystalline structure of the precursor films was strongly dependent on molecular weight of PVDF and process conditions. Blending of two PVDF resins having low and high molecular weights improved the water vapor permeability of the obtained membranes. The tensile response was monitored during the stretching process for membrane development and the results revealed a distinct behavior for the membranes having low or high permeability. The membranes with low permeability did not show any significant strain hardening during stretching whereas for highly permeable membranes, a noticeable strain hardening behavior was observed. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1219–1229, 2009     

Simple synthesis of palladium nanoparticles, β-phase formation, and the control of chain and dipole orientations in palladium-doped poly(vinylidene fluoride) thin films

Palladium nanoparticles (Pd-NP's) are prepared by a simple one-step procedure when poly(vinylidene fluoride) (PVDF) is used as a polymer stabilizer. High-quality Pd-NP-doped PVDF thin films are fabricated where the heat-controlled spin-coating technique is adopted. The effect of Pd-NP's on the crystal modifications and lamellae orientation in PVDF films is investigated using Fourier transform infrared-grazing incidence reflection absorption spectroscopy. The electroactive β phase and edge-on crystalline lamellae are found to be formed preferentially in Pd-NP-doped PVDF films. As a result, Pd-NP-doped PVDF ultrathin films gave a very good discernible contrast between the written and erased data bits, which suggests that they can be used as a scanning-probe-microscopy-based ferroelectric memory device or a ferroelectric gate field-effect transistor memory device in the future.     

Polymorphism behavior of poly(ethylene naphthalate)/clay nanocomposites: role of clay surface modification

The influence of clay surface modification on the polymorphism behavior of poly(ethylene naphthalate) (PEN)/clay nanocomposites was investigated via in situ Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction. The results show that untreated clay has a heterogeneous nucleating effect on PEN and favors the beta-crystal form, while the surfactant 1-hexadecyl-2,3-dimethylimidazolium (IMC16) has a plasticization effect and tends to enhance the kinetically favored alpha-phase instead. In contrast, the nanocomposite (PEN/IMC16-MMT) formed from IMC16-treated clay (IMC16-MMT) exhibits a strong temperature-dependent polymorphic behavior, with the beta-phase being more favored at 200 degrees C, but the alpha-phase being preferred instead at 180 degrees C. In situ FTIR spectroscopy of PEN/IMC16-MMT reveals an abrupt change in the concentration of alpha- and beta-"crystalline conformers" between the two temperatures during the induction period of crystallization. This is attributed to the hindered formation of stable nuclei at the organoclay surface. In addition, surfactant degradation gives rise to a highly plasticized polymer/organoclay interface. The combination of the hindered heterogeneous nucleation and plasticization effects gives rise to the unique temperature-dependent polymorphism behavior in PEN/IMC16-MMT.     

Crystalline Morphology and Polymorphic Phase Transitions in Electrospun Nylon 6 Nanofibers

Uniform nylon 6 nanofibers with diameters around 200 nm were prepared by electrospinning. Polymorphic phase transitions and crystal orientation of nylon 6 in unconfined (i.e., as-electrospun) and a high T(g) (340 degrees C) polyimide confined nanofibers were studied. Similar to melt-spun nylon 6 fibers, electrospun nylon 6 nanofibers also exhibited predominant, meta-stable gamma crystalline form, and the gamma-crystal (chain) axes preferentially oriented parallel to the fiber axis. Upon annealing above 150 degrees C, gamma-form crystals gradually melted and recrystallized into the thermodynamically stable alpha-form crystals, which ultimately melted at 220 degrees C. Release of surface tension accompanied this melt-recrystallization process, as revealed by differential scanning calorimetry. For confined nanofibers, both the melt-recrystallization and surface tension release processes were substantially depressed; gamma-form crystals did not melt and recrystallize into alpha-form crystals until 210 degrees C, only 10 degrees C below the T(m) at 220 degrees C. After complete melting of nano-confined crystals at 240 degrees C and recrystallization at 100 degrees C, only alpha-form crystals oriented perpendicular to the nanofiber axis were obtained. In the polyimide-confined nanofibers, the Brill transition (from the monoclinic alpha-form to a high temperature monoclinic form) was observed at 180-190 degrees C, which was at least 20 degrees C higher than that in unconfined nylon 6 at approximately 160 degrees C. This, again, was attributed to the confinement effect.     

Crystalline Morphology and Crystallization Kinetics of Melt-miscible Crystalline/Crystalline Polymer Blends of Poly（vinylidene fluoride） and Poly（butylene succinate-co-24mol% hexamethylene succinate）

Poly（vinylidene fluoride） （PVDF） and poly（butylene succinate-co-24 mol% hexamethylene succinate） （PBHS）, both crystalline polymers, formed melt-miscible crystalline/crystalline polymer blends. Both the characteristic diffraction peaks and nonisothermal melt crystallization peak of each component were found in the blends, indicating that PVDF and PBHS crystallized separately. The crystalline morphology and crystallization kinetics of each component were studied under different crystallization conditions for the PVDF/PBHS blends. Both the spherulitic growth rates and overall isothermal melt crystallization rates of blended PVDF decreased with increasing the PBHS composition and were lower than those of neat PVDF, when the crystallization temperature was above the melting point of PBHS component. The crystallization mechanism of neat and blended PVDF remained unchanged, despite changes of blend composition and crystallization temperature. The crystallization kinetics and crystalline morphology of neat and blended PBHS were further studied, when the crystallization temperature was below the melting point of PBHS component. Relative to neat PBHS, the overall crystallization rates of the blended PBHS first increased and then decreased with increasing the PVDF content in the blends, indicating that the preexisting PVDF crystals may show different effects on the nucleation and crystal growth of PBHS component in the crystalline/crystalline polymer blends.     

Thermal properties and influence of orientation on crystalline morphologies in stereoblock polypropylene and related elastomers

Atomic force microscopy (AFM), small angle X‐ray scattering (SAXS), temperature modulated differential scanning calorimetry (TMDSC), variable heating rate DSC, an independent rapid heating rate method for melting points, and cyclic mechanical testing were used to study semicrystalline thermoplastic elastomeric polypropylenes (ELPPs) and related semicrystalline polyolefins including ethylene copolymers. Low crystallinity (ca., 9 and 15%) ELPP samples were studied by AFM in the nonoriented and melt‐oriented states. AFM images taken as a function of time after quenching of a melt‐drawn and highly nucleated film resolved details of secondary crystallization involving lateral growth on the ordered row‐nucleated structures. For nonoriented films, isothermal melt crystallization at high temperatures (110 °C) led to similar features for the two ELPPs. The dominant crystalline morphology studied by AFM consisted of small (several nm in width) granular crystallites organized into immature but large spherulites spanning tens of microns. A striking cross‐hatch morphology was detected in regions of the surface in 110 °C crystallized samples, which is contrasted with melt‐drawn films where row nucleated structures dominated the morphology in the film under no external stress. AFM was also used to monitor the morphological changes that occurred as the films were stretched at 25 °C. Break‐down of lamellae was observed, resulting in oriented narrow fibrils. Cyclic stress‐strain curves showed the expected result where lower crystallinity ELPPs had higher recoverable levels of set after both 100 and 500% elongation. TMDSC was used to resolve the broad melting and recrystallization regions in these low to medium crystallinity ELPP systems, and to contrast the results with ethylene copolymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Reorganization and growth of metastable alpha-N2 critical nuclei into stable beta-N2 crystals

We report on results on the crystal nucleation and growth of nitrogen. Using molecular dynamics simulations, we show that while nucleation proceeds into the metastable alpha-phase (i.e., the crystalline phase associated with the lowest free energy barrier of formation), growth of the crystallite proceeds through a reorganization of the nucleus into the thermodynamically stable beta-phase.     

Conformational changes and phase transformation mechanisms in PVDF solution‐cast films

The supramolecular crystal structure in poly(vinylidene fluoride) (PVDF) solution‐cast films is studied through changing crystallization conditions in two solvents of different structures and polarities. The crystalline‐state chain conformations of isothermally solution‐crystallized PVDF in N, N‐dimethylacetamide (DMAc), and cyclohexanone are studied through the specific FTIR absorption bands of α, β, and γ phase crystals. There are no changes in the FTIR spectra of cyclohexanone solution‐crystallized films in the temperature range of 50–120 °C. In the case of DMAc solution‐crystallized films, low temperature crystallization mainly results in formation of trans states (β and γ phases), whereas at higher temperatures gauche states become more populated (α phase). This is due to the variations in solvent polarity and ability to induce a specific conformation in PVDF chains, through the changes in chain coil dimensions. This indicates that in spite of cyclohexanone solutions, the intermolecular interactions between PVDF and DMAc are temperature‐sensitive and more important in stabilizing conformations of PVDF in crystalline phase than temperature dependence of PVDF chain end‐to‐end distance <r²>. The high‐resolution ¹⁹F NMR spectroscopy also showed little displacement in PVDF characteristic chemical shifts probably due to changes in PVDF chain conformation resulting from temperature variations. Upon uniaxial stretching of the prepared films under certain conditions, contribution of trans state becomes more prominent, especially for the originally higher α phase‐containing films. Due to formation of some kink bands during film stretching and phase transformation, α phase absorption bands are still present in infrared spectra. Besides, uniaxial stretching greatly enhances piezoelectric properties of the films, maybe due to formation of oriented β phase crystals, which are of more uniform distribution of dipole moments. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3487–3495, 2004     

Epitaxial crystallization of isotactic poly(methyl methacrylate) on highly oriented polyethylene

The annealing behavior of amorphous i-PMMA thin films on highly oriented HDPE substrates was studied by transmission infrared spectroscopy and electron diffraction. The i-PMMA thin film on highly oriented HDPE exhibits a much faster crystallization rate than usual, providing not only a good method for the preparation of crystalline i-PMMA thin and ultrathin film, but also the convenience to observe the crystallization process by infrared spectroscopy in situ. The overall crystallization kinetics of the i-PMMA thin film on the highly oriented HDPE layer was also explored in this work, and an Avrami exponent of about 2 was obtained. The accelerated crystallization behavior indicates a special interaction between HDPE and i-PMMA, which favors the nucleation and crystallization of i-PMMA. This special interaction leads also to an oriented alignment of i-PMMA on the HDPE substrate with both polymer chains parallel, i.e., the occurrence of heteroepitaxy, which could be verified by the polarized infrared spectra and electron diffraction pattern. Electron diffraction analysis further demonstrated that the contact planes of this epitaxial system are (100) lattice planes of both polymers. This can be explained in terms of a two-dimensional lattice matching.     

Various crystalline morphology of poly(butylene succinate-co-butylene adipate) in its miscible blends with poly(vinylidene fluoride)

Poly(vinylidene fluoride) (PVDF) and poly(butylene succinate-co-butylene adipate) (PBSA) are crystalline/crystalline polymer blends with PVDF being the high-T(m) component and PBSA being the low-T(m) component, respectively. PVDF/PBSA blends are miscible as shown by the decrease of crystallization peak temperature and melting point temperature of each component with increasing the other component content and the homogeneous melt. The low-T(m) component PBSA presents various confined crystalline morphologies due to the presence of the high-T(m) component PVDF crystals by changing blend composition and crystallization conditions in the blends. There are mainly three different types of crystalline morphologies for PBSA in its miscible blends with PVDF. First, crystallization of PBSA commenced in the interspherulitic regions of the PVDF spherulites and continued to develop inside them in the case of PVDF-rich blends under two-step crystallization conditions. Second, PBSA spherulites appeared first in the left space after the complete crystallization of PVDF, contacted and penetrated the PVDF spherulites by forming interpenetrated spherulites in the case of PVDF-poor blends under two-step crystallization condition. Third, PBSA spherulites nucleated and continued to grow inside the PVDF spherulites that had already filled the whole space during the quenching process in the case of PBSA-rich blends under one-step crystallization condition. The conditions of forming the various crystalline morphologies were discussed.     

Melting and crystallization of poly(vinylidene fluride) under high pressure

Precise melting and crystallization temperatures of extended-chain and folded-chain crystals of form I and folded-chain crystals of form II poly(vinylidene fluoride) under high pressure have been obtained by microdifferential thermal analysis (DTA). Upon heating at pressures above 4000 kg/cm², the micro-DTA thermogram of form II crystallized from the melt at atmospheric pressure shows melting of the form II structure and the melting of the folded-chain and extended-chain crystals of form I, formed through recrystallization processes. These features were clarified by supplemental methods. The bandwidth seen in electron micrographs of the extended-chain crystal of form I obtained by crystallization under high pressure was in the range of 1500 to 2000 Å. At atmospheric pressure, the extended-chain crystal of form I melted at 207°C, approximately 17°C higher than the folded-chain crystal of form I and 31°C higher than the folded-chain crystal of form II.     

Brewster angle microscopy study of poly(epsilon-caprolactone) crystal growth in Langmuir films at the air/water interface

Surface pressure-induced crystallization of poly(epsilon-caprolactone) (PCL) from a metastable region of the surface pressure-area per monomer (Pi-A) isotherm in Langmuir monolayers at the air/water (A/W) interface has been captured in real time by Brewster angle microscopy (BAM). Morphological features of PCL crystals grown in Langmuir films during the compression process exhibit four fully developed faces and two distorted faces. During expansion of the crystallized film, polymer chains slowly detach from the crystalline domains and diffuse back into the monolayer as the crystals "melt". Typical diffusion-controlled morphologies are revealed by BAM during the melting process as the secondary dendrites melt away faster, that is, at a higher surface pressure than the principal axes. Electron diffraction on Langmuir-Schaefer films suggests that the lamellar crystals are oriented with the polymer chain axes perpendicular to the substrate surface, while atomic force microscopy reveals a crystal thickness of approximately 7.6 nm.     

Direct formation of form I poly(1‐butene) single crystals from melt crystallization in ultrathin films

The morphologies and crystalline structures of melt‐crystallized ultrathin isotactic poly(1‐butene) films have been studied with transmission electron microscopy and electron diffraction. It is demonstrated that a bypass of form II crystallization can be achieved with an increase in its crystallization temperature. Electron microscopy observations show that melt‐grown isotactic poly(1‐butene) single crystals have a well‐shaped hexagonal form, whereas form I crystals converted from form II display the morphologies of their tetragonal precursors. Electron diffraction results indicate that, instead of the twinned hexagonal pattern of the converted form I crystal, the directly formed form I single crystals exhibit an untwinned hexagonal pattern. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2641–2645, 2002     

High-pressure phases in polymers. II. Spherulitic growth morphology in cis-polyisoprene

The morphological details of the nucleation and growth of spherulites in cis-polyisoprene at elevated pressures are discussed on the basis of transmission electron microscopy of films stained in situ by osmium tetroxide and cold-stage electron diffraction of unstained films. The crystalline structure is unchanged but growth habits are modified. Spherulites begin, as in crystallization at atmospheric pressure, with a single lamella. The formation of a spherulite proceeds primarily through “spawning” and is unaffected by the imposition of pressure. Lamellae tend to propagate as plates or hedrites at supercoolings in excess of 50–60°C (e.g., 1 kbar at 0°C) unlike at atmospheric pressure where only ribbonlike lamellae are observed. Propagation is invariably as sheafs since nucleation of lamellae which grow perpendicular to the primary lamella is suppressed. The nucleation density varies considerably with pressure, a maximum being observed in the pressure plane at constant temperature (e.g., 0.70 kbar at 0°C). It is difficult to resolve clearly the morphological details in the diffusion controlled region because of fine texture. Although much more difficult to achieve experimentally, the effects of pre-orienting the melt are similar to those occurring at atmospheric pressure.     

Analysis of crystallization behavior and crystal modifications of poly(butylene‐2,6‐naphthalene dicarboxylate)

Information on the crystalline structure and the properties of poly(butylene‐2,6‐naphthalene dicarboxylate) (PBN) has not been well reported until now, but it is known that there are two different crystal modifications in PBN, as follows: one is formed in isotropic samples by annealing (α form); another appears by annealing with tension (β form). The relation between the crystal modifications and the kinetics of isothermal crystallization for PBN was investigated using in‐situ Fourier transform infrared spectroscopy (FTIR) and wide‐angle X‐ray diffraction (WAXD). The melting behavior of each crystalline form was also studied by means of FTIR and differential scanning calorimetry (DSC) measurements. From the analysis of the melt‐crystallized PBN specimens, the two crystalline forms coexisted in the isotropic samples melt‐crystallized at 230°C, but only the α crystal modification was observed in the films annealed at lower temperatures. In addition, it was revealed that, at 230°C, the β modification was formed only in the primary crystallization process. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 561–574, 1999