Two phosphonodehydrotripeptides: Boc0–Gly1–Δ(Z)Phe2–α‐Abu3PO3Me2 and Boc0–Gly1–Δ(Z)Phe2–α‐Nva3PO3Et2

The present paper reports the crystal structures of two short phosphonotripeptides (one in two crystal forms) containing one ΔPhe (dehydrophenylalanine) residue, namely dimethyl (3‐{[tert‐butoxycarbonylglycyl‐α,β‐(Z)‐dehydrophenylalanyl]amino}propyl)phosphonate, Boc⁰–Gly¹–Δ(Z)Phe²–α‐Abu³PO₃Me₂, C₂₁H₃₂N₃O₇P, (I), and diethyl (4‐{[tert‐butoxycarbonylglycyl‐α,β‐(Z)‐dehydrophenylalanyl]amino}butyl)phosphonate, Boc⁰–Gly¹–Δ(Z)Phe²–α‐Nva³PO₃Et₂, as the propan‐2‐ol monosolvate 0.122‐hydrate, C₂₄H₃₈N₃O₇P·C₃H₈O·0.122H₂O, (II), and the ethanol monosolvate 0.076‐hydrate, C₂₄H₃₈N₃O₇P·C₂H₆O·0.076H₂O, (III). The crystals of (II) and (III) are isomorphous but differ in the type of solvent. The phosphono group is linked directly to the last C_α atom in the main chain for all three peptides. All the amino acids are trans linked in the main chains. The crystal structures exhibit no intramolecular hydrogen bonds and are stabilized by intermolecular hydrogen bonds only.     

Some reactions with ω-bromoacetophenone: Synthesis of Δαβ-butenolide and its transformation into pyrrole derivatives

ω-Bromoacetophenone reacts with the sodium salt of ethyl cyanoacetate to afford α-cyano-β-phenyl-Δ^αβ-butenolide. This butenolide undergoes azo coupling with diazotized aromatic amines (ArNH₂) to afford the hydrazo derivatives. These hydrazo derivatives (ArPh, 4-ClC₆H₄, 4-MeC₆H₄, 4-MeOC₆H₄) were transformed into the corresponding 3(2H)-pyridazinone derivatives on stirring in methanol in the presence of potassium hydroxide. These latter compounds were converted into the corresponding 3-cyano-2,5-dihydroxy-4-phenyl-N-arylpyrrole derivatives on reduction with zinc dust in refluxing acetic acid, presumably via reductive cleavage of the N N bond of the pyridazine followed by recyclization via loss of ammonia.     

Kinetics of the reactions of cyclopropane derivatives. V. The gas-phase unimolecular reactions of 1 α-chloro-2α,3α-dimethylcyclopropane and 1α-chloro-2α,3β-dimethylcyclopropane

Thermolysis of the “all-cis” compound 1α-chloro-2α,3α-dimethylcyclopropane (A) at 550–607 K and 6–115 torr is a first-order homogeneous non-radical-chain process giving penta-1,3-diene (PD) and HCl as products. The Arrhenius parameters are log₁₀A(sec^?1) = 13.92 ± 0.08 and E = 199.6 ± 0.9 kJ/mol. The isomer with trans-methyl groups, 1α-chloro-2α,3β-dimethylcyclopropane (B) reacts by two parallel first-order processes giving as observed products trans-4-chloropent-2-ene (4CP) and PD + HCl, with log₁₀A(sec^?1) = 14.6 and 13.8, respectively, and E = 199.5 and 190.2 kJ/mol, respectively. The 4CP undergoes secondary decomposition to PD + HCl (as investigated previously). Comparison of the results for compounds (A) and (B) with those for other gas-phase and solution reactions leads to the conclusion that the gas-phase thermolyses proceed by rate-determining ring opening to form olefins which may decompose further by thermal or chemically activated reactions, and that the ring opening is a semiionic electrocyclic reaction in which alkyl groups in the 2,3-positions trans to the migrating chlorine semianion move apart, with appropriate consequences for the rate of reaction and the stereochemistry of the products.     

The Crystal and Molecular Structure of 3-Oxo-17β-acetoxy-Δ4-14α-methyl-8α, 9β, 10α, 13α-estrene

The crystal and molecular structure of 3-oxo-17β-acetoxy-Δ⁴-14α-methyl-8α, 9β, 10α, 13α-estrene, C₂₁H₃₀O₃, has been determined by X-ray diffraction analysis. The crystals belong to the orthorhombic space group P2₁2₁2₁, with the cell dimensions a = 12.093 Å, b = 19.667 Å, c = 7.746 Å; Z = 4. Intensity data were collected at room temperature with an automatic four-circle diffractometer. The structure was solved by direct methods and the parameters were refined by least-squares analysis. All the hydrogen atoms were included in the refinement. The final R value was 0.038 for 1413 observed reflections. The conformation of ring A is intermediate between a half-chair and a 1, 2-diplanar form. The hydrogens at C(9) and C(10) are anti, the B/C ring junction is trans, and rings B and C adopt chair conformations. Ring D is cis fused and is halfway between C₂ and C_s forms.     

The reaction of Wittig and Wittig–Horner reagents with dicyanomethylene derivatives of fluorenone,xanthone, and thiaxanthone. A novel synthesis of phosphoranylidenecyclobutylidene derivatives

>Wittig reagents 1a,b react with dicyanomethylene derivatives of fluorenone (3) and xanthone (4) to give the corresponding phosphoranylidenecyclobutylidene adducts 6a, 6b, 9a, and 9b. On the other hand, the reaction of Wittig–Horner reagents (2) with the same nitriles 3 and 4 afforded the respective phosphonate adduct 8 and the alkylated product 10. A mechanism that accounts for the formation of the new products is presented. © 1999 John Wiley & Sons, Inc. Heteroatom Chem 10: 263–269, 1999     

1,3-Dipolar cycloaddition of nitrones with α,β-unsaturated sulfones

C,N-Diphenyl nitrones react with substituted α,β-unsaturated phenylsulfones yielding isoxazolidinic cycloadducts whose structure and stereochemistry were assigned on the basis of ¹H and ¹³C nmr data. The ycloaddition regioselectivity is discussed in accordance with frontier orbital considerations.     

Δ2‐Isoxazolines from β,γ‐unsaturated oximes

3,5‐Disubstituted Δ²‐isoxazolines can be prepared using the palladium‐mediated nucleometalation / methoxycarbonylation of β,γ‐unsaturated oximes. This novel route to this class of compounds is tolerant of a wide variety of functionality in the starting material, and provides a rapid route to highly functionalized isoxazolines.     

The reactions of perfluoro- and α,α-dichloropolyfluoroalkanesulfinates

Sodium perfluoroalkanesulfinate, R_FSO₂Na [R_F?Cl(CF₂)₄, 1a; CF₃(CF₂)₅, 1b; Cl(CF₃)₆, 1c] reacted with bromine in aqueous solution to give the corresponding sulfonyl bromide R_FSO₂Br (2a-2c) and in acetonitrile or acetic acid, to form perfluoroalkyl bromide R_FBr (3a-3c). Heating in acetonitrile at 80°C, 2a-2c were converted smoothly into 3a-3c. However, reaction of sodium α,α-dichloropolyfluoroalkanesulfinate RCCl₂SO₂Na (R?CF₃, Cl(CF₂)n, n=2, 4, 6, 5a-5d) with bromine in aqueous solution gave directly the corresponding bromoalkanes 1-bromo-1,1-dichloropolyfluoroalkane RCCl₂Br (6a-6d). In aqueous potassium iodide solution, 1a-1c, 5a and 5b also reacted with iodine to form the corresponding iodo-polyfluoroalkane 4a-4c, 7a and 7b directly. 6a and 7a underwent free radical addition to alkene readily in the presence of free radical initiator and reacted with Na₂S₂O₄ in the usual way to form α,α-dichloropolyfluoroethane sulfinate (5a). 5a was stable in strong acid, but reacted with strong base to yield 10. 5a was oxidised by hydrogen peroxide to the sulfonate 11 and reduced by zinc in dilute acid to from the α-chloro sulfinate 12.     

Applications of 1,4-addition of grignard reagents to α,β-unsaturated acid derivatives. III—configuration studies of α,β-diaryl-α,β-dialkylpropionitriles

The configuration of twenty-four different α,β-diaryl-α,β-dialkylpropionitriles has been determined using nuclear magnetic resonance spectra. The erythro form showed greater deshielding of the methine hydrogen and alkyl groups in its spectra than the corresponding threo isomer. The former, however, showed less deshielding of the aryl groups than the threo isomer. Infrared spectra were not suitable for assignments of configuration.     

[3+3] Cyclization reactions of β-nitroenamines and β-enaminonitriles with α,β-unsaturated carboxylic acid chlorides

New indolizidines, quinolizidines, and octahydro-pyrido[1,2-a]azepines of lactam type were synthesized from 2-nitromethylene-pyrrolidine, -piperidine, and -hexahydroazepine, respectively, by [3+3] cyclizations with α,β-unsaturated carboxylic acid chlorides. In the case of quinolizidines, a double bond migration was observed, and explained in terms of amidity percentage. Cyanomethylene-pyrrolidine gave indolizidines of lactam type, while transformations of 1-cyanomethylene-tetrahydoisoquinoline resulted in lactams as well as ketones, when simple open-chain acid chlorides or cinnamoyl chloride were used, respectively.     

γ–α Solid–solid transition of isotactic polypropylene

X-ray diffraction patterns have been taken as a function of time and temperature on a sample of polypropylene held under high pressure (4.14 kbar) for 180 hr. at a temperature of 248°C. and subsequently cooled to room temperature. The molded sample initially crystallizes in the triclinic γ–phase but transforms to the γ–phase at elevated temperatures. The rate of conversion from γ to α is a function of time and temperature and tends to approach a constant value with increasing time. The nature of the thermal changes occurring in the sample was also studied by differential scanning calorimetry. It appears that at low scan speeds, there is a solid–solid transformation from the α-phase to the γ–phase, but at high scan speeds, the γ–phase melts without conversion to the α-phase.     

Thermische Lactonisierung von Estern γ-Brom-α, β-ungesättigter Carbonsäuren zu Δα-Butenoliden. Direkte γ-Bromierung von α, β-ungesättigten Säuren

By heating with iron powder at 120–150° some γ-bromo-α, β-unsaturated carboxylic methyl esters, and, less smothly, the corresponding acids, were lactonized to Δ^7alpha;-butenolides with elimination of methyl bromide. The following conversions have thus been made: methyl γ-bromocrotonate ( 1c ) and the corresponding acid ( 1d ) to Δ^α-butenolide ( 8a ), methyl γ-bromotiglate ( 3c ) and the corresponding acid ( 3d ) to α-methyl-Δ^α-butenolide ( 8b ), a mixture of methyl trans- and cis-γ-bromosenecioate ( 7c and 7e ) and a mixture of the corresponding acids ( 7d and 7f ) to β-methyl-Δ^α-butenolide ( 8c ). The procedure did not work with methyl trans-γ-bromo-Δ^α-pentenoate ( 5c ) nor with its acid ( 5d ). Most of the γ-bromo-α, β-unsaturated carboxylic esters ( 1c, 7c, 7e and 5c ) are available by direct N-bromosuccinimide bromination of the α, β-unsaturated esters 1a, 7a and 5a ; methyl γ-bromotiglate ( 3c ) is obtained from both methyl tiglate ( 3a ) and methyl angelate ( 4a ), but has to be separated from a structural isomer. The γ-bromo-α, β-unsaturated esters are shown by NMR. to have the indicated configurations which are independent of the configuration of the α, β-unsaturated esters used; the bromination always leads to the more stable configuration, usually the one with the bromine-carrying carbon anti to the carboxylic ester group; an exception is methyl γ-bromo-senecioate, for which the two isomers (cis, 7e , and trans, 7d ) have about the same stability. The N-bromosuccinimide bromination of the α,β-unsaturated carboxylic acids 1b , 3b , 4b , 5b and 7b is shown to give results entirely analogous to those with the corresponding esters. In this way γ-bromocrotonic acid ( 1 d ), γ-bromotiglic acid ( 3 d ), trans- and cis-γ-bromosenecioic acid ( 7d and 7f ) as well as trans-γ-bromo-Δ^α-pentenoic acid ( 5d ) have been prepared. Iron powder seems to catalyze the lactonization by facilitating both the elimination of methyl bromide (or, less smoothly, hydrogen bromide) and the rotation about the double bond. α-Methyl-Δ^α-butenolide ( 8b ) was converted to 1-benzyl-( 9a ), 1-cyclohexyl-( 9b ), and 1-(4′-picoly1)-3-methyl-Δ^α-pyrrolin-2-one ( 9 c ) by heating at 180° with benzylamine, cyclohexylamine, and 4-picolylamine. The butenolide 8b showed cytostatic and even cytocidal activity; in preliminary tests, no carcinogenicity was observed. Both 8b and 9c exhibited little toxicity.     

Cycloaddition reactions of sulfonylisothiocyanates with β,β-disubstituted enamines

Sulfonylisothiocyanates 1 and β,β-dimethylenamines 2 react to yield the dipoles 3. In nonpolar solvents an equilibrium exists between 3 and the thietanes 4. The free activation enthalpy for the ring closure 3→4 was obtained from the temperature dependent NMR spectra in liquid sulfur dioxide. Protonation of 3 with perchloric acid leads to the salts 8 which, as indicated by ΔG^≠-values obtained from NMR spectra, are also capable of ring closure.