Stopped-flow study of the gas-phase reaction of ozone with organic sulfides: Dimethyl sulfide

The autoinhibiting reaction of ozone with dimethyl sulfide (DMS), has been studied at 296°K and 1.1 kPa (8 torr) as a function of the concentrations of both reactants. The major products of the reaction are H₂CO, H₂O, CO, and SO₂. The specific rate of primary attack of O₃ on DMS is immeasurably slow. It is suggested that the rapid overall rate observed for this reaction is due to a chain reaction initiated by the very slow primary reaction. It is concluded that reaction (1) cannot be important under atmospheric conditions and that the major loss process for DMS in the atmosphere is probably reaction with photochemically generated free radicals.     

A kinetic and product study of the Cl + HO2 reaction

Absolute rate data and product branching ratios for the reactions Cl + HO2 --> HCl + O2 (k1a) and Cl + HO2 --> OH + ClO (k1b) have been measured from 226 to 336 K at a total pressure of 1 Torr of helium using the discharge flow resonance fluorescence technique coupled with infrared diode laser spectroscopy. For kinetic measurements, pseudo-first-order conditions were used with both reagents in excess in separate experiments. HO2 was produced by two methods: through the termolecular reaction of H atoms with O2 and also by the reaction of F atoms with H2O2. Cl atoms were produced by a microwave discharge of Cl2 in He. HO2 radicals were converted to OH radicals prior to detection by resonance fluorescence at 308 nm. Cl atoms were detected directly at 138 nm also by resonance fluorescence. Measurement of the consumption of HO2 in excess Cl yielded k1a and measurement of the consumption of Cl in excess HO2 yielded the total rate coefficient, k1. Values of k1a and k1 derived from kinetic experiments expressed in Arrhenius form are (1.6 +/- 0.2) x 10(-11) exp[(249 +/- 34)/T] and (2.8 +/- 0.1) x 10(-11) exp[(123 +/- 15)/T] cm3 molecule(-1) s(-1), respectively. As the expression for k1 is only weakly temperature dependent, we report a temperature-independent value of k1 = (4.5 +/- 0.4) x 10(-11) cm3 molecule(-1) s(-1). Additionally, an Arrhenius expression for k1b can also be derived: k1b = (7.7 +/- 0.8) x 10(-11) exp[-(708 +/- 29)/T] cm3 molecule(-1) s(-1). These expressions for k1a and k1b are valid for 226 K < or = T < or = 336 and 256 K < or = T < or = 296 K, respectively. The cited errors are at the level of a single standard deviation. For the product measurements, an excess of Cl was added to known concentrations of HO2 and the reaction was allowed to reach completion. HCl product concentrations were determined by IR absorption yielding the ratio k1a/k1 over the temperature range 236 K < or = T < or = 296 K. OH product concentrations were determined by resonance fluorescence giving rise to the ratio k1b/k1 over the temperature range 226 K < or = T < or = 336 K. Both of these ratios were subsequently converted to absolute numbers. Values of k1a and k1b from the product experiments expressed in Arrhenius form are (1.5 +/- 0.1) x 10(-11) exp[(222 +/- 17)/T] and (10.6 +/- 1.5) x 10(-11) exp[-(733 +/- 41)/T] cm3 molecule(-1) s(-1), respectively. These expressions for k1a and k1b are valid for 256 K < or = T < or = 296 and 226 K < or = T < or = 336 K, respectively. A combination of the kinetic and product data results in the following Arrhenius expressions for k1a and k1b of (1.4 +/- 0.3) x 10(-11) exp[(269 +/- 58)/T] and (12.7 +/- 4.1) x 10(-11) exp[-(801 +/- 94)/T] cm3 molecule(-1) s(-1), respectively. Numerical simulations were used to check for interferences from secondary chemistry in both the kinetic and product experiments and also to quantify the losses incurred during the conversion process HO2 --> OH for detection purposes.     

Composition of peroxide products in reaction of ozone with cyclohexane

Conclusions A modified iodometric method was developed for determining H₂O₂, hydroperoxides, and peroxides in reaction mixtures. Employing this method, the nature of the peroxide compounds formed in the reaction of ozone and cyclohexane was established, and also the rate of their accumulation. The principal peroxide product in the reaction is cyclohexyl peroxide.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 9, pp. 2104–2106, September, 1976.     

Rate constants for the gas-phase reaction of ozone with unsaturated oxygenates

The gas-phase reaction of ozone with a series of unsaturated oxygenates and with 1-pentene has been studied at ambient T (287–296 K) and p=1 atm. of air. Reaction rate constants, in units of 10⁻¹⁸ cm³ molecule⁻¹ s⁻¹, are 0.22±0.05 for 2 (5H)-furanone, 1.08±0.20 for methacrolein, 1.74±0.20 for crotonaldehyde, 5.84±0.39 for methylvinyl ketone, 1.05±0.15 for methyl acrylate, 3.20±0.47 for vinyl acetate, 59.0±8.7 for cis-3-hexenyl acetate, 154±30 for ethylvinyl ether, ≥(315±23) for linalool, and 10.9±1.4 for 1-pentene. The results are compared to literature data for the compounds studied and for other unsaturated oxygenates, and are discussed in terms of reactivity toward ozone as a function of the nature, number, and position of the oxygen-containing substituents (SINGLEBOND)CHO, (SINGLEBOND)C(O)R, (SINGLEBOND)C(O)OR, and (SINGLEBOND)OC(O)R. Atmospheric implications are briefly examined. © 1998 John Wiley & Sons, Inc. Int. J Chem Kinet: 30: 21–29, 1998.     

A product study of the gas-phase reaction of Methacrolein with the OH radical in the presence of NOx

The gas-phase reaction of methacrolein with the OH radical, in the presence of NO_x, was investigated at 298 ± 2 K and atmospheric pressure of air. Hydroxyacetone, methylglyoxal, a peroxyacyl nitrate identified as CH₂ ? C(CH₃)C(O)OONO₂ (peroxymethacryloyl nitrate), formaldehyde, CO, and CO₂ were observed to be the major products. The product yield data for these compounds show that OH radical addition to the >C ? C< bond accounts for ca. 50% of the overall reaction, with the remaining ca. 50% proceeding via H—atom abstraction from the ? CHO group. The data suggest that the alkoxy radical formed following the addition of OH to the terminal carbon atom, decomposes primarily to give the formyl radical plus hydroxyacetone. A lower limit ratio of 5: 1 has been estimated for OH radical addition to the terminal carbon atom of the double bond relative to addition on the inner carbon atom.     

A product study of the gas-phase reaction of Isoprene with the OH radical in the presence of NOx

The gas-phase reaction of isoprene with the OH radical, in the resence of NO_x, was investigated at 298 ± 2 K and atmospheric pressure of air by long path length FT-IR spectroscopy. The primary products identified and their formation yields were: methacrolein, 0.21 ± 0.05; methyl vinyl ketone, 0.29 ± 0.07; and HCHO, with the observed yield being consistent with the sum of the methacrolein and methyl vinyl ketone yields. Combined with the previously reported yield of 0.044 ± 0.006 for 3-methylfuran, these products accounted for 55 ± 9% of the isoprene which reacted. Under conditions where the dark reaction of isoprene with NO₂is not significant, the balance of the isoprene consumed could possibly be accounted for by the “organic nitrates” and “other carbonyl compounds” formed in estimated overall yields of ca. 12% and ca. 25%, respectively.     

The kinetics of the gas-phase reaction between ozone and alkenes

The rate law ? d[O₃]/ dt = k₁[A][O₃] + k₃[A][O₃]²/ (k₄ + k₅[O₂]) has been found to obtain for the reaction of ozone with allene and with 1,2-butadiene. We now find that this rate law also applies to the reaction of ozone with ethylene and presumably with all lower alkenes. This generalizes the inhibiting effect of oxygen and accounts for the simplifed rate law found in the presence of excess oxygen. Oxygen itself is a product of the ozone–ethylene reaction, and we find that as [O₃]₀ increases, the (O₂ formed)/(O₃ used) ratio approaches 1.5. Values of k₁, k₃/k₅ for ethylene are compared with those for allene, 1,3-butadiene, and propene. A generalized mechanism is postulated for the reaction of ozone with alkenes involving a chain sequence that produces oxygen and which accounts for the observed rate law. A specific mechanism is postulated for the reaction of O₃ with ethylene, and the thermochemistry of the chain sequence is examined in detail.     

A gas-phase kinetic study of the reaction between bromine monoxide and methylperoxy radicals at atmospheric temperatures

The rate constant of the reaction of BrO with CH(3)O(2) was determined to be k1 = (6.2 +/- 2.5) x 10(-12) cm3 molecule(-1) s(-1) at 298 K and 100-200 Torr of O2 diluent. Quoted uncertainty was two standard deviations. No significant pressure dependence of the rate constants was observed at 100-200 Torr total pressure of N2 or O2 diluents. Temperature dependence of the rate constants was further investigated over the range 233-333 K, and an Arrhenius type expression was obtained for k1 = 4.6 x 10(-13) exp[(798 +/- 76)/T] cm3 molecule(-1) s(-1). The product branching ratios were evaluated and the atmospheric implications were discussed.     

Rate constants for the gas-phase reaction of ozone with 1,2-disubstituted alkenes

The gas-phase reaction of ozone with eight 1,2-disubstituted alkenes has been investigated at ambient temperature (T = 286–296 K) and p = 1 atm. of air. The reaction rate constants, in units of 10⁻¹⁸ cm³ molecule⁻¹s⁻¹, are 144 ± 17 for cis-3-hexene, 157 ± 25 for trans-3-hexene, 89.8 ± 9.7 for cis-4-octene, 131 ± 15 for trans-4-octene, 114 ± 13 for cis-5-decene, ≥ 130 for trans-5-decene, 38.3 ± 5.0 for trans-2.5-dimethyl-3-hexene, and 40.3 ± 6.7 for trans-2.2-dimethyl-3-hexene. Substituent effects on alkene reactivity are examined. Cis-1,2-disubstituted alkenes are less reactive than the corresponding trans isomers. The 1,2-disubstituted alkenes that bear bulky substituents (substitution at the 3-carbon) are ca. 3 times less reactive than the corresponding n-alkyl substituted compounds. The atmospheric persistence of 1,2-disubstituted alkenes is briefly discussed. © 1996 John Wiley & Sons, Inc.     

A product study of the gas-phase reaction of methyl vinyl ketone with the OH radical in the presence of NOx

The gas-phase reaction of methyl vinyl ketone with the OH radical, in the presence of NO_x, was investigated at 298 ± 2 K and atmospheric pressure of air. Glycolaldehyde and methylglyoxal were observed to be the major products, with a combined yield of 0.89 ± 0.16. The sum of the yields of the two other main products, formaldehyde and peroxyacetyl nitrate, were found to be essentially unity. The product yield data for glycolaldehyde and methylglyoxal indicate that OH radical addition to the terminal carbon atom of the >C?C< bond accounts for 72 ± 21% of the overall reaction, with the remaining 28 ± 9% proceeding via addition to the inner carbon atom of the double bond.     

A kinetic and product study of reaction of chlorine atom with CH3CH2OD

The reaction of atomic chlorine with CH₃CH₂OD has been examined using a discharge fast flow system coupled to a mass spectrometer combined with the relative rate method (RR/DF/MS). At 298 ± 2 K, the rate constant for the Cl + CH₃CH₂OD reaction was determined using cyclohexane as a reference and found to be k₃ = (1.13 ± 0.21) × 10^?10 cm³ molecule^?1 s^?1. Mass spectral studies of the reaction products resulted in yields greater than 97% for the combined hydrogen abstraction at the α and β sites (3a + 3b) and less than 3% at the hydroxyl site (3c). As a calibration of the apparatus and the RR/DF/MS technique, the rate constant of the Cl + CH₃CH₂OH reaction was also determined using cyclohexane as the reference, and a value of k₂ = (1.05 ± 0.07) × 10^?10 cm³ molecule^?1 s^?1 was obtained at 298 ± 2 K, which was in excellent agreement with the value given in current literature. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 584–590, 2004     

Time-resolved gas-phase kinetic and quantum chemical studies of the reaction of silylene with oxygen

Time-resolved kinetic studies of the reaction of silylene, SiH2, generated by laser flash photolysis of phenylsilane, have been carried out to obtain rate constants for its bimolecular reaction with O(2). The reaction was studied in the gas phase over the pressure range 1-100 Torr in SF(6) bath gas, at five temperatures in the range 297-600 K. The second order rate constants at 10 Torr were fitted to the Arrhenius equation: [see text] The decrease in rate constant values with increasing temperature, although systematic is very small. The rate constants showed slight increases in value with pressure at each temperature, but this was scarcely beyond experimental uncertainty. From estimates of Lennard-Jones collision rates, this reaction is occurring at ca. 1 in 20 collisions, almost independent of pressure and temperature. Ab initio calculations at the G3 level backed further by multi-configurational (MC) SCF calculations, augmented by second order perturbation theory (MRMP2), support a mechanism in which the initial adduct, H(2)SiOO, formed in the triplet state (T), undergoes intersystem crossing to the more stable singlet state (S) prior to further low energy isomerisation processes leading, via a sequence of steps, ultimately to dissociation products of which the lowest energy pair are H2O+SiO. The decomposition of the intermediate cyclo-siladioxirane, via O-O bond fission, plays an important role in the overall process. The bottleneck for the overall process appears to be the T-->S process in H2SiOO. This process has a small spin-orbit coupling matrix element, consistent with an estimate of its rate constant of 1x10(9) s-1 obtained with the aid of RRKM theory. This interpretation preserves the idea that, as in its reactions in general, SiH2 initially reacts at the encounter rate with O2. The low values for the secondary reaction barriers on the potential energy surface account for the lack of an observed pressure dependence. Some comparisons are drawn with the reactions of CH2+O2 and SiCl2+O2.     

Absolute rate constants for the gas-phase reaction of OH radicals with cyclohexane and ethane at 295 K

The absolute rate constants for the gas-phase H-atom abstraction by hydroxyl radicals from cyclohexane and ethane have been determined at room temperature. OH radicals were produced by pulse radiolysis of an H₂O-Ar mixture, and the decay of OH was followed by monitoring the transient light absorption around 309 nm. The rate constants were found to be k = (5.24±0.36) × 10⁻¹² and (2.98±0.21) × 10⁻¹³ cm³ molecule⁻¹ s⁻¹ for cyclohexane and ethane, res- pectively. These results are compared with literature data.     

Kinetic and product yield study of the heterogeneous gas-surface reaction of anthracene and ozone

Little quantitative information exists regarding the products of the heterogeneous reaction of polycyclic aromatic hydrocarbons (PAHs) and ozone. We have, therefore, performed the first quantitative study investigating the kinetics and products of the heterogeneous gas-surface reaction of anthracene and ozone as a function of ozone concentration and relative humidity (RH). The reaction exhibited pseudo-first-order kinetics for anthracene loss under dry conditions (RH < 1%) and the pseudo-first-order rate coefficients displayed a Langmuir-Hinshelwood dependence on the gas-phase ozone concentration, which yielded the following fitting parameters: the equilibrium constant for ozone adsorption, K(O3) = (2.8 +/- 0.9) x 10(-15) cm3 and the maximum pseudo-first-order rate coefficient, k(I)max = (6.4 +/- 1.8) x 10(-3) s(-1). The kinetics were unchanged when experiments were performed at approximately 50% and 60% RH. In the product study, a nonlinear dependence, similar to a Langmuir adsorption plot, of the anthraquinone product yield as a function of ozone concentration was observed and resulted in the following fitting parameters: K(O3) = (3.4 +/- 1.5) x 10(-15) cm3 and the maximum anthraquinone yield, ANQmax % = 30 +/- 18%. Experiments performed under higher relative humidity conditions ( approximately 50% and 60% RH) revealed that the anthraquinone yield was unaffected by the presence of gas-phase water. It is noteworthy that both the anthracene loss kinetics and the anthraquinone yields have a similar dependence on the degree of ozone partitioning to the surface. This can be understood in terms of a mechanism whereby the rate-determining steps for anthracene loss and anthraquinone formation are both driven by the amounts of ozone adsorbed on the surface. Our results suggest that at atmospherically relevant ozone concentrations (100 ppb) the anthraquinone yield from the ozonolysis of anthracene under dry and high relative humidity conditions would be less than 1%.     

Rate constants for the gas-phase reaction of ozone with 1, 1-disubstituted alkenes

The gas-phase reaction of ozone with eight alkenes including six 1,1-disubstituted alkenes has been investigated at ambient T (285–298 K) and p = 1 atm. of air. The reaction rate constants are, in units of 10⁻¹⁸ cm³ molecule⁻¹ s⁻¹, 9.50 ± 1.23 for 3-methyl-1-butane, 13.1. ± 1.8 for 2-methyl-1-pentene, 11.3 ± 3.2 for 2-methyl-1,3-butadiene (isoprene), 7.75 ± 1.08 for 2,3,3-trimethyl-1-butene, 3.02 ± 0.52 for 3-methyl-2-isopropyl-1-butene, 3.98 ± 0.43 for 3,4-diethyl-2-hexene, 1.39 ± 17 for 2,4,4-trimethyl-2-pentene, and >370 for (cis + trans)-3,4-dimethyl-3-hexene. For isoprene, results from this study and earlier literature data are consistent with: k (cm³ molecule⁻¹ s⁻¹) = 5.59 (+ 3.51, &minus 2.16) × 10⁻¹⁵ e^{(−3606±279/RT)}, n = 28, and R = 0.930. The reactivity of the other alkenes, six of which have not been studied before, is discussed in terms of alkyl substituent inductive and steric effects. For alkenes (except 1,1-disubstituted alkenes) that bear H, CH₃, and C₂H₅ substituents, reactivity towards ozone is related to the alkene ionization potential: In k<(10⁻¹⁸ cm³ molecule⁻¹ s⁻¹) = (32.89 ± 1.84) − (3.09 ± 0.20) IP (eV), n = 12, and R = 0.979. This relationship overpredicts the reactivity of C_≥3 1-alkenes, of 1,1-disubstituted alkenes, and of alkenes with bulky substituents, for which reactivity towards ozone is lower due to substituent steric effects. The atmospheric persistence of the alkenes studied is briefly discussed. © 1996 John Wiley & Sons, Inc.     

A gas-phase kinetic study on the thermal decomposition of 2-chloropropene

The gas-phase thermal decomposition of 2-chloropropene in the presence of a radical inhibitor was studied in the temperature range of 668.2–747.2 K and pressure between 11–76 Torr using the conventional static system. The dehydrochlorination to propyne and HCl was the only reaction channel and accounted for >98% of the reaction. The formation of propyne was found to be homogeneous and unimolecular and follows a first-order rate law. The observed rate coefficient is expressed by the following Arrhenius equation: $$ k_{total} = 10^{13.05 \pm 0.46} (s^{ - 1} )\exp ^{ - 242.6 \pm 6.2({{kJ} \mathord{\left/ {\vphantom {{kJ} {mol}}} \right. \kern-\nulldelimiterspace} {mol}})/RT} . $$ The hydrogen halide elimination is believed to proceed through a semipolar four-membered cyclic transition state. The presence of a methyl group on the α-carbon atom lowered the activation energy by 47 kJ mol^?1. The experimentally observed pressure dependence of the rate constant is compared with the theoretically predicted values that are obtained by RRKM calculations.     

Time-resolved gas-phase kinetic and quantum chemical studies of the reaction of silylene with nitric oxide

Time-resolved kinetic studies of the reaction of silylene, SiH2, generated by laser flash photolysis of phenylsilane, have been carried out to obtain rate constants for its bimolecular reaction with NO. The reaction was studied in the gas phase over the pressure range 1-100 Torr in SF6 bath gas at five temperatures in the range 299-592 K. The second-order rate constants at 10 Torr fitted the Arrhenius equation log(k/cm3 molecule(-1) s(-1)) = (-11.66 +/- 0.01) + (6.20 +/- 0.10 kJ mol(-1))/RT ln 10 The rate constants showed a variation with pressure of a factor of ca. 2 over the available range, almost independent of temperature. The data could not be fitted by RRKM calculations to a simple third body assisted association reaction alone. However, a mechanistic model with an additional (pressure independent) side channel gave a reasonable fit to the data. Ab initio calculations at the G3 level supported a mechanism in which the initial adduct, bent H2SiNO, can ring close to form cyclo-H2SiNO, which is partially collisionally stabilized. In addition, bent H2SiNO can undergo a low barrier isomerization reaction leading, via a sequence of steps, ultimately to dissociation products of which the lowest energy pair are NH2 + SiO. The rate controlling barrier for this latter pathway is only 16 kJ mol(-1) below the energy of SiH2 + NO. This is consistent with the kinetic findings. A particular outcome of this work is that, despite the pressure dependence and the effects of the secondary barrier (in the side reaction), the initial encounter of SiH2 with NO occurs at the collision rate. Thus, silylene can be as reactive with odd electron molecules as with many even electron species. Some comparisons are drawn with the reactions of CH2 + NO and SiCl2 + NO.     

A study of the gas-phase reaction between protonated acetaldehyde and methanol

Protonated acetaldehyde is methylated on the oxygen during interaction with methanol in the gas phase. The ionic product of the ion/molecule reaction between methanol and protonated acetaldehyde is identical with C-protonated methylvinyl ether (high-pressure ionization), and with the (M − C₂H₅)⁺ fragment ion of sec-butyl methyl ether (following electron ionization), and also with the (M − OCH₃)⁺ fragment ion of acetaldehyde dimethylacetal (following electron ionization). The structures of these ions and the mechanism of their formation were established by isotope-labeling experiments and collision-induced dissociation mass spectra of model compounds obtained with three different types of tandem mass spectrometers (BEQQ, triple-quadrupole, and a penta-quadrupole instrument). Gas phase synthesis of the product ion from [²H₃]-methanol or [²H₄]-acetaldehyde provided insight into its mode of formation and collision-induced dissociation.     

A kinetic study of the reaction of substituted benzenethiols with pertechnetate

The kinetics of the reaction of pertechnetate with a series of para-substituted benzenethiols have been studied. The reaction follows simple second order kinetics. The rate of reaction decreases as the substituent becomes more electron-withdrawing. The kinetic data suggest that the reaction involves nucleophilic attack of a benzenethiol molecule on technetium.

---

- . . . , .