Pyrolysis of β-hydroxyketones and α-ketoesters: Gas-phase elimination kinetics of 3-hydroxy-3-methyl-2-butanone and methyl benzoylformate

The rates of gas-phase elimination reactions of methyl benzoylformate ( 1 ) and 3-hydroxy-3-methyl-2-butanone ( 2 ) were obtained at T = 600 K. The two substrates undergo unimolecular first-order elimination for which the Arrhenius equations are, respectively, log k = 13.2 − 53270/(4.574 × 600) for ( 1 ) and log k = 12.4 − 53060/(4.574 × 600) for ( 2 ). The products of pyrolysis of ( 1 ) are benzaldehyde, formaldehyde and CO, while those of ( 2 ) are acetaldehyde and acetone. The kinetics of the elimination reactions show benzoylformic acid to be 10⁶-fold more reactive than ( 1 ), and pyruvic acid ca. 10⁵-fold more reactive relative to ( 2 ); an indication of the rate-controlling part played by the acidity of the hydrogen atom involved in the elimination process of the present compounds in this particular type of reaction. © 1997 John Wiley & Sons, Inc. Int J Chem Kinet 29: 295–298, 1997.     

Photoinduced transformation of α,β-epoxyketones to β-hydroxyketones by Hantzsch 1,4-dihydropyridine

Irradiation (λ >300 nm) of Hantzsch 1,4-dihydropyridine with aromatic α,β-epoxyketones in acetonitrile selectively breaks the Cα---O bond of the epoxides giving the corresponding β-hydroxyketones in excellent yields.     

Theoretical study of the mechanism for the gas‐phase pyrolysis kinetics of 2‐methylbenzyl chloride

The study of the kinetics and mechanism of dehydrochlorination reaction of 2‐methyl benzyl chloride in the gas phase was carried out by means of electronic structure calculations using ab initio Móller‐Plesset MP2/6‐31G(d,p), and Density Functional Theory (DFT) methods: B3LYP/6‐31G(d,p), B3LYP/6‐31++G(d,p), MPW1PW91/6‐31G(d,p), MPW1PW91/6‐31++G(d,p)], PBE/6‐31G(d,p), PBE/6‐31++G(d,p). Investigated reaction pathways comprise: Mechanism I, a concerted reaction through a six‐centered cyclic transition state (TS) geometry; Mechanism II, a 1,3‐chlorine shift followed by beta‐elimination and Mechanism III, a single‐step elimination with simultaneous HCl and benzocyclobutene formation through a bicyclic type of TS. Calculated parameters ruled out Mechanism III and suggest the elimination reaction may occur by either unimolecular Mechanism I or Mechanism II. However, the TS of the former is 20 kJ/mole more stable than the TS of the latter. Consequently, the Mechanism I seem to be more probable to occur. The rate‐determining process is the breaking of C‐Cl bond. The involvement of π‐electrons of the aromatic system was demonstrated by NBO charges and bond order calculations. The reaction is moderately polar in nature. © 2011 Wiley Periodicals, Inc. Int J Chem Kinet 43: 537–546, 2011     

Theoretical study on the deglycosylation mechanism of rice BGlu1 β‐glucosidase

It is proposed that the catalysis of GH1 enzymes follows a double‐displacement mechanism involving a glycosylation and a deglycosylation steps. In this article, the deglycosylation step was studied using quantum mechanical/molecular mechanical (QM/MM) approach. The calculation results reveal that the nucleophilic water (Wat1) attacks to the anomeric C₁, and the deglycosylation step experiences a barrier of 21.4 kcal/mol from the glycosyl‐enzyme intermediate to the hydrolysis product, in which an oxocarbenium cation‐like transition state (TS) is formed. At the TS, the covalent glycosyl‐enzyme bond is almost broken (distance of 2.45 Å), and the new covalent bond between the attacking oxygen of the water molecule and C₁ is basically established (length of 2.14 Å). In addition, a short hydrogen bridge is observed between the nucleophilic E386 and the C₂? OH of sugar ring (distance of 1.94 Å) at the TS, which facilitates the ring changing from a chair form to half‐chair form, and stabilizes the oxocarbenium cation‐like TS. © 2013 Wiley Periodicals, Inc.     

Stereoselective catalytic tishchenko reduction of β-hydroxyketones using scandium triflate

A number of aliphatic and aromatic β-hydroxyketones were reduced to 1,3-diol monoesters by aldehydes in the presence of a catalytic amount of scandium triflate. Chiral substrates were reduced with high 1,3-anti diastereoselectivity.     

Additive Pummerer reactions of vinylic sulfoxides. Synthesis of γ-hydroxy-α,β-unsaturated esters, α-hydroxyketones, and 2-phenylsulfenyl aldehydes and primary alcohols

Treatment of β-monosubstituted vinylic sulfoxides 1 with trifluoroacetic anhydride in dichloromethane gave excellent yields of 1,2-bis(trifluoroacetoxy)thioethers 6. Mildly basic methanolysis of 2-alkyl-substituted 6 gave α-hydroxyaldehydes 11 as monomer-dimer mixtures; similar treatment of the 2-aryl analogues afforded aryl (hydroxymethyl) ketones 12. Compounds 11 underwent Wittig reactions with methoxycarbonylmethylenetriphenylphosphorane to give high yields of γ-hydroxy-α,β-unsaturated esters 13, predominantly as the E-isomers. β-Monosubstituted vinylic sulfoxides 1 possessing a β-aryl group, and β-disubstituted vinylic sulfoxides 3 reacted with trifluoromethanesulfonic anhydride-sodium acetate in acetic anhydride to give 2-(phenylsulfenyl)acylals 14. These gave 2-phenylsulfenyl aldehydes 15 upon basic methanolysis, and the corresponding primary alcohols 16 on reduction with sodium borohydride. Reaction of both geometric isomers of enantiomerically pure vinylic sulfoxide 1o with TFAA gave racemic 6o as a mixture of diastereomers. Reaction of optically pure (E)- and (Z)-1p with trifluoromethanesulfonic anhydride-sodium acetate in acetic anhydride gave acylal 19 in 10.5 and 23% e.e., respectively.     

The retro-aldol mechanism in the pyrolysis kinetics of primary,secondary, and tertiary β-hydroxy ketones in the gas phase

The pyrolysis kinetics of primary, secondary, and tertiary β-hydroxy ketones have been studied in static seasoned vessels over the pressure range of 21–152 torr and the temperature range of 190°–260°C. These eliminations are homogeneous, unimolecular, and follow a first-order rate law. The rate coefficients are expressed by the following equations: for 1-hydroxy-3-butanone, log k₁(s^?1) = (12.18 ± 0.39) ? (150.0 ± 3.9) kJ mol^?1 (2.303RT)^?1; for 4-hydroxy-2-pentanone, log k₁(s^?1) = (11.64 ± 0.28) ? (142.1 ± 2.7) kJ mol^?1 (2.303RT)^?1; and for 4-hydroxy-4-methyl-2-pentanone, log k₁(s^?1) = (11.36 ± 0.52) ? (133.4 ± 4.9) kJ mol^?1 (2.303RT)^?1. The acid nature of the hydroxyl hydrogen is not determinant in rate enhancement, but important in assistance during elimination. However, methyl substitution at the hydroxyl carbon causes a small but significant increase in rates and, thus, appears to be the limiting factor in a retroaldol type of mechanism in these decompositions. © John Wiley & Sons, Inc.     

An efficient and convenient transformation of α-haloketones to α-hydroxyketones using cesium formate

A new safe and convenient transformation has been developed. In the presence of cesium formate in dry MeOH solution, α-haloketones underwent direct conversion reaction to afford α-hydroxyketone in excellent yields. Furthermore, this methodology can be extended and applied in 2-chloro-N-(1,3-diphenyl-1H-pyrazol-5-yl)acetamide, 2-chloro-N-(2,6-dimethylphen-yl)acetamide, 1-(bromomethylsulfonyl)benzene, and N-(bromomethyl)phthalimide to give the corresponding products in moderate to excellent yields.     

Theoretical study on mechanism of cinchona alkaloids catalyzed asymmetric conjugate addition of dimethyl malonate to β‐nitrostyrene

The mechanism and enantioselectivity of the asymmetric conjugate addition of dimethyl malonate to β‐nitrostyrene catalyzed by cinchona alkaloid QD‐4 as organic catalyst are investigated using density function theory and ab initio methods. Six different reaction pathways, corresponding to the different approach modes of β‐nitrostyrene to dimethyl malonate are considered. Calculations indicate that the reaction process through a dual‐activation mechanism, in which the tertiary amine of cinchona alkaloid QD‐4 first works as a Brønsted base to promote the activation of the dimethyl malonate by deprotonation, and then, the hydroxyl group of QD‐4 acts as Brønsted acid to activate the β‐nitrostyrene. The rate‐determining step is the proton transfer process from the tertiary amine of QD‐4 to α‐carbon of β‐nitrostyrene. The comparison of the mechanisms and energies of the six reaction channels enable us to learn the fact that QD‐4 has good catalytic activities for the system, and implies C9? OH in QD‐4 may not be involved in the activation. These calculation results account well for the observations in experiments. © 2014 Wiley Periodicals, Inc.     

Theoretical study of the thermolysis reaction of β‐hydroxynitriles in the gas phase

The gas‐phase thermal decomposition of 3‐hydroxypropionitrile, 3‐hydroxybutyronitrile, and 3‐hydroxy‐3‐methylbutyronitrile has been studied at the MP2/6‐31G(d) level of theory at 683.15 K and 0.06 atm. Results based both in energy and structure data seem to indicate a favorable route of decomposition via a six‐membered cyclic transition state (similar to those suggested for thermal decomposition of other related compounds, such as β‐hydroxyketones, β‐hydroxyalkenes, and β‐hydroxyalkynes) rather than a four‐membered cyclic transition state or even a quasiheterolytic pathway. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem, 2003     

Gas-phase pyrolysis mechanism and kinetics of 3-t-butoxyquadricyclane

The gas-phase pyrolysis of 3-t-butoxyquadricyclane [1] was investigated over the temperature range 511–542 K at one atm in helium. The initial pyrolysis step is the isomerization of 3-t-butoxyquadricyclane to 7-t-butoxynorbornadiene (Ea = 38.49 ± 0.85 kcal/mole, log A = 15.44 ± 0.35). 7-t-butoxynorbornadiene exhibits a single unimolecular reaction pathway which produces a mixture of t-butoxycycloheptatrienes (Ea = 38.44 ± 0.63 kcal/mole, log A = 15.05 ± 0.26). This two-step mechanism affords fewer reactions than unsubstituted quadricyclane in the gas phase and could be useful for its reduced sooting potential. © 1996 John Wiley & Sons, Inc.     

Gas-phase pyrolysis mechanism and kinetics of 3-chloroquadricyclane

The gas-phase pyrolysis of 3-chloroquadricyclane [1] was investigated over the temperature range 513–550 K at one atm in helium. The initial pyrolysis step is the isomerization of 3-chloroquadricyclane to 7-chloronorbornadiene (E_a=39.63±1.40 kcal/mole, log A=15.18±0.58). 7-chloronorbornadiene rearranges (623–660 K) to exclusively produce benzyl chloride (E_a=48.05±1.10 kcal/mole, log A=15.82±0.38). This two step mechanism affords fewer reactions than the unsubstituted quadricyclane system in the gas phase. The production of a benzene derivative from the chlorinated norbornadiene is a reaction pathway contained in the unsubstituted norbornadiene and other 7-substituted pyrolysis mechanisms. © 1997 John Wiley & Sons, Inc.     

Preparation of Protected β2‐ and β3‐Homocysteine, β2‐ and β3‐Homohistidine,and β2‐Homoserine for Solid‐Phase Syntheses

The Ser, Cys, and His side chains play decisive roles in the syntheses, structures, and functions of proteins and enzymes. For our structural and biomedical investigations of β‐peptides consisting of amino acids with proteinogenic side chains, we needed to have reliable preparative access to the title compounds. The two β³‐homoamino acid derivatives were obtained by Arndt–Eistert methodology from Boc‐His(Ts)‐OH and Fmoc‐Cys(PMB)‐OH (Schemes 2–4), with the side‐chain functional groups' reactivities requiring special precautions. The β²‐homoamino acids were prepared with the help of the chiral oxazolidinone auxiliary DIOZ by diastereoselective aldol additions of suitable Ti‐enolates to formaldehyde (generated in situ from trioxane) and subsequent functional‐group manipulations. These include OH→O^tBu etherification (for β²hSer; Schemes 5 and 6), OH→STrt replacement (for β²hCys; Scheme 7), and CH₂OH→CH₂N₃→CH₂NH₂ transformations (for β²hHis; Schemes 9–11). Including protection/deprotection/re‐protection reactions, it takes up to ten steps to obtain the enantiomerically pure target compounds from commercial precursors. Unsuccessful approaches, pitfalls, and optimization procedures are also discussed. The final products and the intermediate compounds are fully characterized by retention times (t_R), melting points, optical rotations, HPLC on chiral columns, IR, ¹H‐ and ¹³C‐NMR spectroscopy, mass spectrometry, elemental analyses, and (in some cases) by X‐ray crystal‐structure analysis.     

Theoretical Study Of β2,3‐Peptide Models

Conformational features of α,β‐disubstituted β^2,3‐dipeptide models have been studied with quantum mechanics method. Geometries were optimized with the HF/6‐31G** method, and energies were evaluated with the B3LYP/6‐31G** method. Solvent effect was evaluated with the SCIPCM method. For (2S,3S)‐β^2,3‐dipeptide model 1 , a six‐membered‐ring hydrogen bonded structure is most stable. However, the conformation corresponding to the formation of the 14‐helix is only about 1.7 kcal/mol less stable in methanol solution, indicating that the 14‐helix is favored if a (2S,3S)‐β^2,3‐polypeptide contains more than 5 residues. On the other hand, the conformation corresponding to the formation of β‐sheet is most stable for (2R,3S)‐β^2,3‐dipeptide model 2 , suggesting that this type of β‐peptides is intrinsically favored for the formation of β‐sheet secondary structure.     

Confocal microscopy study of uptake kinetics of α‐lactalbumin and β‐lactoglobulin onto the cation‐exchanger SP Sepharose FF

Confocal laser scanning microscopy (CLSM) was used to study single‐ and two‐component protein uptake for α‐lactalbumin (ALA) and β‐lactoglobulin (BLG), as models for whey proteins, to SP Sepharose FF at pH 3.7 during batch experiments in a finite bath. By coupling a fluorescent dye with the protein molecule, the penetration into individual adsorbent particles at different times during batch uptake was visualised. In a single‐component system, BLG penetrated fast into the adsorbent beads and gradually filled them in a shell‐wise fashion, while adsorption of ALA was mostly confined to the outer shells of the adsorbent. For the two‐component studies, the results showed that ALA was able to displace BLG despite its lower affinity to the adsorbent under the employed conditions. CLSM results were then compared both qualitatively and quantitatively to their counterparts obtained in traditional experiments by indirect measurements of the protein concentration in the fluid phase. A novel quantitative approach was undertaken by modifying the simple kinetic rate model traditionally used to determine the kinetic rate constant, k₁, for batch uptake experiments, in order to describe batch uptake kinetics based on CLSM data. Although BLG results were in good agreement, there was a discrepancy in ALA results.