A Hermite finite element method for incompressible fluid flow

We describe some Hermite stream function and velocity finite elements and a divergence‐free finite element method for the computation of incompressible flow. Divergence‐free velocity bases defined on (but not limited to) rectangles are presented, which produce pointwise divergence‐free flow fields (∇· u _h≡0). The discrete velocity satisfies a flow equation that does not involve pressure. The pressure can be recovered as a function of the velocity if needed. The method is formulated in primitive variables and applied to the stationary lid‐driven cavity and backward‐facing step test problems. Copyright © 2009 John Wiley & Sons, Ltd.     

A control-volume based finite element method for three-dimensional incompressible turbulent fluid flow,heat transfer,and related phenomena

A control-volume based finite element method of equal-order type for three-dimensional incompressible turbulent fluid flow, heat transfer, and related phenomena is presented. The discretization equations are based mainly on the physics of the phenomena under consideration, more than on mathematical arguments. Special emphasis is devoted to the discretization of the convective terms and the continuity equation, and to the treatment of the boundary conditions imposed by the use of a high Reynolds k-?, type turbulence model. The pressure-velocity coupling in the fluid flow calculation is made from a derivative of the original SIMPLER method, without pressure correction. The discretized equations are solved in a sequential, rather than a coupled, form with significant advantage in the required computer time and storage. The method is an extension of a former version proposed by us for two-dimensional, laminar problems, and is here successfully applied to the following situations: three-dimensional deflected turbulent jet, and flows in 90° and 45° junctions of ducts with rectangular cross sections. The calculated results are in very good agreement with the experimental and numerical (obtained with the well established finite difference method) data available in the literature.     

Gauge finite element method for incompressible flows

A finite element method for computing viscous incompressible flows based on the gauge formulation introduced in [Weinan E, Liu J‐G. Gauge method for viscous incompressible flows. Journal of Computational Physics (submitted)] is presented. This formulation replaces the pressure by a gauge variable. This new gauge variable is a numerical tool and differs from the standard gauge variable that arises from decomposing a compressible velocity field. It has the advantage that an additional boundary condition can be assigned to the gauge variable, thus eliminating the issue of a pressure boundary condition associated with the original primitive variable formulation. The computational task is then reduced to solving standard heat and Poisson equations, which are approximated by straightforward, piecewise linear (or higher‐order) finite elements. This method can achieve high‐order accuracy at a cost comparable with that of solving standard heat and Poisson equations. It is naturally adapted to complex geometry and it is much simpler than traditional finite element methods for incompressible flows. Several numerical examples on both structured and unstructured grids are presented. Copyright © 2000 John Wiley & Sons, Ltd.     

A distributed Lagrange multiplier/fictitious domain method for flows around moving rigid bodies: Application to particulate flow

This article discusses the application of a Lagrange multiplier‐based fictitious domain method to the numerical simulation of incompressible viscous flow modeled by the Navier–Stokes equations around moving rigid bodies; the rigid body motions are due to hydrodynamical forces and gravity. The solution method combines finite element approximations, time discretization by operator splitting and conjugate gradient algorithms for the solution of the linearly constrained quadratic minimization problems coming from the splitting method. The study concludes with the presentation of numerical results concerning four test problems, namely the simulation of an incompressible viscous flow around a NACA0012 airfoil with a fixed center but free to rotate, then the sedimentation of 200 and 1008 cylinders in a two‐dimensional channel, and finally the sedimentation of two spherical balls in a rectangular cylinder. Copyright © 1999 John Wiley & Sons, Ltd.     

New stabilized finite element method for time‐dependent incompressible flow problems

A new stabilized finite element method is considered for the time‐dependent Stokes problem, based on the lowest‐order P₁?P₀ and Q₁?P₀ elements that do not satisfy the discrete inf–sup condition. The new stabilized method is characterized by the features that it does not require approximation of the pressure derivatives, specification of mesh‐dependent parameters and edge‐based data structures, always leads to symmetric linear systems and hence can be applied to existing codes with a little additional effort. The stability of the method is derived under some regularity assumptions. Error estimates for the approximate velocity and pressure are obtained by applying the technique of the Galerkin finite element method. Some numerical results are also given, which show that the new stabilized method is highly efficient for the time‐dependent Stokes problem. Copyright © 2009 John Wiley & Sons, Ltd.     

A lattice Boltzmann fictitious domain method for modeling red blood cell deformation and multiple‐cell hydrodynamic interactions in flow

To model red blood cell (RBC) deformation and multiple‐cell interactions in flow, the recently developed technique derived from the lattice Boltzmann method and the distributed Lagrange multiplier/fictitious domain method is extended to employ the mesoscopic network model for simulations of RBCs in flow. The flow is simulated by the lattice Boltzmann method with an external force, while the network model is used for modeling RBC deformation. The fluid–RBC interactions are enforced by the Lagrange multiplier. To validate parameters of the RBC network model, stretching tests on both coarse and fine meshes are performed and compared with the corresponding experimental data. Furthermore, RBC deformation in pipe and shear flows is simulated, revealing the capacity of the current method for modeling RBC deformation in various flows. Moreover, hydrodynamic interactions between two RBCs are studied in pipe flow. Numerical results illustrate that the leading cell always has a larger flow velocity and deformation, while the following cells move slower and deform less.Copyright © 2013 John Wiley & Sons, Ltd.     

A fast and robust fictitious domain method for modelling viscous flows in complex mixers: The example of propellant make‐down

This work deals with the development of a fast three‐dimensional numerical strategy for the simulation of viscous fluid flow in complex mixing systems. The proposed method is based on a distributed Lagrange multiplier fictitious domain method and the use of the low‐cost MINI finite element. Contrary to the previous fictitious domain method developed by our group a few years ago, the underlying partial differential equations are solved here in a coupled manner using a consistent penalty technique. The method is discussed in detail and its precision is assessed by means of experimental data in the case of an agitated vessel. A comparison made with our existing fictitious domain method and its decoupled Uzawa‐based solver clearly shows the advantages of resorting to the MINI finite element and fully coupled solution strategy. The new technique is then applied to the simulation of the flow of a Newtonian viscous fluid in a three‐blade planetary mixer in the context of the production of solid propellants. Copyright © 2008 John Wiley & Sons, Ltd.     

Multi‐material incompressible flow simulation using the moment‐of‐fluid method

This paper compares the numerical performance of the moment‐of‐fluid (MOF) interface reconstruction technique with Youngs, LVIRA, power diagram (PD), and Swartz interface reconstruction techniques in the context of a volume‐of‐fluid (VOF) based finite element projection method for the numerical simulation of variable‐density incompressible viscous flows. In pure advection tests with multiple materials MOF shows dramatic improvements in accuracy compared with the other methods. In incompressible flows where density differences determine the flow evolution, all the methods perform similarly for two material flows on structured grids. On unstructured grids, the second‐order MOF, LVIRA, and Swartz methods perform similarly and show improvement over the first‐order Youngs' and PD methods. For flow simulations with more than two materials, MOF shows increased accuracy in interface positions on coarse meshes. In most cases, the convergence and accuracy of the computed flow solution was not strongly affected by interface reconstruction method. Published in 2009 by John Wiley & Sons, Ltd.     

Spectral-finite element method for compressible fluid flow

In this paper, a combined Fourier spectral-finite element method is proposed for solving n-dimensional (n=2, 3), semi-periodio compressible fiuid flow problems. The strict error estimation as well as the convergence rate, is presented.     

A dimension split method for the incompressible Navier–Stokes equations in three dimensions

In this paper, we describe a new method for the three‐dimensional steady incompressible Navier–Stokes equations, which is called the dimension split method (DSM). The basic idea of DSM is that the three‐dimensional space is split up into a cluster of two‐dimensional manifolds and then the three‐dimensional solution is approximated by the solutions on these two‐dimensional manifolds. Through introducing some technologies, such as SUPG stabilization, multigrid method, and such, we firstly make DSM feasible in the computation of real flow. Because of split property of DSM, all computation is carried out on these two‐dimensional manifolds, namely, a series of two‐dimensional problems only need to be solved in the computation of three‐dimensional problem, which greatly reduces the difficulty and the computational cost in the mesh generation. Moreover, these two‐dimensional problems can be computed simultaneously and a coarse‐grained parallel algorithm would be constructed, whereas the two‐dimensional manifold is considered as the computation unit. In the last, we explore the behavior and the accuracy of the proposed method in two numerical examples. Firstly, error estimates, performance of multigrid method, and parallel algorithm are well‐demonstrated by the known analytical solution case. Secondly, the computations of three‐dimensional lid‐driven cavity flows with different Reynolds numbers are compared with other numerical simulations. Results show that the present implementation is able to exhibit good stability and accuracy properties for real flows. Copyright © 2013 John Wiley & Sons, Ltd.     

A second‐order time accurate finite element method for quasi‐incompressible viscous flows

A finite element method for quasi‐incompressible viscous flows is presented. An equation for pressure is derived from a second‐order time accurate Taylor–Galerkin procedure that combines the mass and the momentum conservation laws. At each time step, once the pressure has been determined, the velocity field is computed solving discretized equations obtained from another second‐order time accurate scheme and a least‐squares minimization of spatial momentum residuals. The terms that stabilize the finite element method (controlling wiggles and circumventing the Babuska–Brezzi condition) arise naturally from the process, rather than being introduced a priori in the variational formulation. A comparison between the present second‐order accurate method and our previous first‐order accurate formulation is shown. The method is also demonstrated in the computation of the leaky‐lid driven cavity flow and in the simulation of a crossflow past a circular cylinder. In both cases, good agreement with previously published experimental and computational results has been obtained. Copyright © 2010 John Wiley & Sons, Ltd.     

Combined adaptive meshing technique and characteristic-based split algorithm for viscous incompressible flow analysis

A combined characteristic-based split algorithm and an adaptive meshing technique for analyzing two-dimensional viscous incompressible flow are presented.The method uses the three-node triangular element with equal-order interpolation functions for all variables of the velocity components and pressure.The main advantage of the combined method is that it improves the solution accuracy by coupling an error estima- tion procedure to an adaptive meshing technique that generates small elements in regions with a large change in solution gradients,and at the same time,larger elements in the other regions.The performance of the combined procedure is evaluated by analyzing one test case of the flow past a cylinder,for their transient and steady-state flow behaviors.     

Co-located equal-order control-volume finite element method for two-dimensional axisymmetric incompressible fluid flow

The formulation of a control-volume-based finite element method (CVFEM) for axisymmetric, two-dimensional, incompressible fluid flow and heat transfer in irregular-shaped domains is presented. The calculation domain is discretized into torus-shaped elements and control volumes. In a longitudinal cross-sectional plane, these elements are three-node triangles, and the control volumes are polygons obtained by joining the centroids of the three-node triangles to the mid-points of the sides. Two different interpolation schemes are proposed for the scalar-dependent variables in the advection terms: a flow-oriented upwind function, and a mass-weighted upwind function that guarantees that the discretized advection terms contribute positively to the coefficients in the discretized equations. In the discretization of diffusion transport terms, the dependent variables are interpolated linearly. An iterative sequential variable adjustment algorithm is used to solve the discretized equations for the velocity components, pressure and other scalar-dependent variables of interest. The capabilities of the proposed CVFEM are demonstrated by its application to four different example problems. The numerical solutions are compared with the results of independent numerical and experimental investigations. These comparisons are quite encouraging.     

配置点谱方法-人工压缩法(SCM-ACM)求解不可压缩流体流动

开发了配置点谱方法SCM（spectral collocation method）与人工压缩法ACM（artificial compressibility method）相结合的方法SCM-ACM,用于求解不可压缩粘性流动问题。选取典型的方腔顶盖驱动流为研究测试对象,首先建立人工压缩格式的控制方程,其次采用SCM离散控制方程的空间偏微分项,推导出矩阵形式的代数方程,最后测试了SCM-ACM代码的有效性。结果显示,SCM-ACM能够有效求解不可压缩流动问题,并继承了谱方法的指数收敛特性,且具有ACM求解过程简单及易于实施的特点。     

Development of a three-dimensional solver based on the local domain-free discretization and immersed boundary method and its application for incompressible flow problems

Recently, the author and two other coauthors have proposed a two-dimensional hybrid local domain-free discretization and immersed boundary method (LDFD-IBM), which can be used to solve the flow problem with complex geometries. In this paper, the LDFD-IBM is extended to solve a three-dimensional unsteady incompressible flow with the complex computational domain. The technical issues related to the implementation of the LDFD-IBM in three-dimensional problems are discussed in detail, particularly for the discretization of Navier-Stokes equations, mesh strategies for a three-dimensional flow, and the fast algorithm on the identification of the status of mesh nodes (ie, to identify if the mesh node is located in the solid domain, in the fluid domain, or near the immersed boundary). Numerical tests show that the LDFD-IBM can accurately solve three-dimensional incompressible problems with ease.     

Efficient solving method for unsteady incompressible interfacial flow problems

Unsteady interfacial problems, considered in an Eulerian form, are studied. The phenomena are modeled using the incompressible viscous Navier–Stokes equations to get the velocity field and an advection equation to predict interface evolutions. The momentum equation is solved by means of an implicit hybrid augmented Lagrangian–Projection method, whereas an explicit characteristic method coupled with a TVD SUPERBEE scheme is applied to the advection equation. The velocity components and the pressure are discretized on staggered grids with finite volumes. Emphasis is on the accuracy and robustness of the techniques described before. A precise explanation on the validation phase will be given, which uses such tests as the advection of a step function or Zalesak's problem to improve the calculation of the interface. The global approach is used on a physically hard interfacial test with strong disparities between viscosities and densities. Copyright © 1999 John Wiley & Sons, Ltd.     

On the distributed Lagrange multiplier/fictitious domain method for rigid‐particle‐laden flows: a proposition for an alternative formulation of the Lagrange multipliers

The distributed Lagrange multiplier/fictitious domain method proposed for the direct numerical simulation of particle‐laden flows is considered in this work. First, it is demonstrated that improved accuracy is obtained with a coupled numerical scheme, whereby the pressure and the Lagrange multiplier fields enforcing incompressibility and rigid body motion, respectively, are calculated and applied together. However, the convergence characteristics of the iterative solution of the coupled scheme are poor because symmetric but indefinite and poorly conditioned matrices are produced. An analysis is then presented, which suggests that the cause for the matrix pathologies lies in the interaction of the respective matrix operators enforcing incompressibility and rigid body motion. On the basis of this analysis, an alternative formulation is developed for the Lagrange multipliers, being now composed of a set of forces distributed only on the particle boundary together with a set of couples distributed within the particle core. The new formulation is tested with several types of flows with stationary or moving particles under creeping or finite Reynolds number conditions and it is demonstrated that it produces correct results and better conditioned matrices, thus enabling faster and more reliable convergence of the conjugate gradient method. The analysis and tests, therefore, support the expectation that the proposed formulation is promising and worthy of further study and improvement. Copyright © 2011 John Wiley & Sons, Ltd.     

黏性不可压缩流体流动前沿的数值模拟

提出了模拟注射成型中黏性、不可压缩流体流动前沿的新方法. 将Hele-Shaw流动应用于非 等温条件下的黏性、不可压缩流体，建立了流动分析模型，用充填因子的输运方程描述流动 前沿. 应用高阶Taylor展开式计算每一时间步长的充填因子，用Galerkin方法导出了计算 充填因子各阶导数的递推公式. 给出了时间增量的选取方法，证明了它的稳定性. 针对Han 设计的试验模具，用相同的材料及工艺条件模拟充填过程，比较了传统方法和该方法的模 拟结果与实验结果的差异. 算例分析表明，该方法可以有效地提高注射成型中流动前沿的 模拟精度和计算效率.