Temperature-dependent kinetics studies of the reactions of C2H5O2 and n-C3H7O2 radicals with NO

The rate coefficients for the gas-phase reactions of C₂H₅O₂ and n-C₃H₇O₂ radicals with NO have been measured over the temperature range of (201–403) K using chemical ionization mass spectrometric detection of the peroxy radical. The alkyl peroxy radicals were generated by reacting alkyl radicals with O₂, where the alkyl radicals were produced through the pyrolysis of a larger alkyl nitrite. In some cases C₂H₅ radicals were generated through the dissociation of iodoethane in a low-power radio frequency discharge. The discharge source was also tested for the i-C₃H₇O₂ + NO reaction, yielding k_{298 K} = (9.1 ± 1.5) × 10⁻¹² cm³ molecule⁻¹ s⁻¹, in excellent agreement with our previous determination. The temperature dependent rate coefficients were found to be k(T) = (2.6 ± 0.4) × 10⁻¹² exp{(380 ± 70)/T} cm³ molecule⁻¹ s⁻¹ and k(T) = (2.9 ± 0.5) × 10⁻¹² exp{(350 ± 60)/T} cm³ molecule⁻¹ s⁻¹ for the reactions of C₂H₅O₂ and n-C₃H₇O₂ radicals with NO, respectively. The rate coefficients at 298 K derived from these Arrhenius expressions are k = (9.3 ± 1.6) × 10⁻¹² cm³ molecule⁻¹ s⁻¹ for C₂H₅O₂ radicals and k = (9.4 ± 1.6) × 10⁻¹² cm³ molecule⁻¹ s⁻¹ for n-C₃H₇O₂ radicals. © 1996 John Wiley & Sons, Inc.     

Rate coefficients for the reactions of hydrogen atoms with 1-bromopropane, 2-bromopropane, 1-bromobutane,and 2-bromobutane

The rate coefficients for the reactions of hydrogen atoms with n-C₃H₇Br, s-C₃H₇Br, n-C₄H₉Br, and s-C₄H₉Br were determined in a discharge flow-reactor at 298 K and a pressure of 4 mbar. Molecular-beam sampling and subsequent mass-spectrometric detection with electron-impact ionisation was used for the measurement of the bromo-hydrocarbon concentration. The rate coefficients obtained are (in 10¹⁰ cm³ mol⁻¹ s⁻¹): 2.3±1.2 for n-C₃H₇Br, 2.3±1.2 for s-C₃H₇Br, 2.4±1.2 for n-C₄H₉Br, and 2.8±1.4 for s-C₄H₉Br. The results are compared with predictions from bond-energy bond-order (BEBO) calculations, where a reasonable agreement is found. Furthermore, also by BEBO calculations, the relative importance of bromine abstraction as compared to hydrogen abstraction is estimated. © 1998 John Wiley & Sons, Inc. Int J Chem Kinet: 30: 721–727, 1998     

Kinetics of the reaction of OH radicals with a series of esters under simulated conditions at 295 K

The rate constants of the isopropyl acetate, n-propyl acetate, isopropenyl acetate, n-propenyl acetate, n-butyl acetate, and ethyl butyrate reactions with OH radicals were determined in purified air under atmospheric conditions, at 750 torr and (295 ± 2) K. A relative rate experimental method was used; n-heptane, n-octane, and n-nonane were the reference compounds, with, respectively, rate constants for the reaction with OH of 7.12 × 10⁻¹², 8.42 × 10⁻¹², and 9.70 × 10⁻¹² molecule⁻¹ cm³s⁻¹. The following rate constants were obtained in units of 10⁻¹² molecule⁻¹ cm³s⁻¹; isopropyl acetate, (3.12 ± 0.29); n-propyl acetate, (1.97 ± 0.24); isopropenyl acetate, (62.53 ± 1.24); n-propenyl acetate, (24.57 ± 0.24); n-butyl acetate, (3.29 ± 0.35); and ethyl butyrate, (4.37 ± 0.42). Tertiary butyl acetate has a low reactivity with OH radicals (<1 × 10⁻¹² molecule⁻¹ cm³s⁻¹). © 1996 John Wiley & Sons, Inc.     

Rate coefficients for the gas‐phase reaction of OH radicals with selected dihydroxybenzenes and benzoquinones

Rate coefficients have been determined for the gas‐phase reaction of the hydroxyl (OH) radical with the aromatic dihydroxy compounds 1,2‐dihydroxybenzene, 1,2‐dihydroxy‐3‐methylbenzene and 1,2‐dihydroxy‐4‐methylbenzene as well as the two benzoquinone derivatives 1,4‐benzoquinone and methyl‐1,4‐benzoquinone. The measurements were performed in a large‐volume photoreactor at (300 ± 5) K in 760 Torr of synthetic air using the relative kinetic technique. The rate coefficients obtained using isoprene, 1,3‐butadiene, and E‐2‐butene as reference hydrocarbons are k_OH(1,2‐dihydroxybenzene) = (1.04 ± 0.21) × 10⁻¹⁰ cm³ s⁻¹, k_OH(1,2‐dihydroxy‐3‐methylbenzene) = (2.05 ± 0.43) × 10⁻¹⁰ cm³ s⁻¹, k_OH(1,2‐dihydroxy‐4‐methylbenzene) = (1.56 ± 0.33) × 10⁻¹⁰ cm³ s⁻¹, k_OH(1,4‐benzoquinone) = (4.6 ± 0.9) × 10⁻¹² cm³ s⁻¹, k_OH(methyl‐1,4‐benzoquinone) = (2.35 ± 0.47) × 10⁻¹¹ cm³ s⁻¹. This study represents the first determination of OH radical reaction‐rate coefficients for these compounds. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 696–702, 2000     

Rate constants for the reactions of OH radicals and Cl atoms with Di‐n‐Propyl ether and Di‐n‐Butyl ether and their deuterated analogs

Using relative rate methods, rate constants for the gas‐phase reactions of OH radicals and Cl atoms with di‐n‐propyl ether, di‐n‐propyl ether‐d₁₄, di‐n‐butyl ether and di‐n‐butyl ether‐d₁₈ have been measured at 296 ± 2 K and atmospheric pressure of air. The rate constants obtained (in cm³ molecule⁻¹ s⁻¹ units) were: OH radical reactions, di‐n‐propyl ether, (2.18 ± 0.17) × 10⁻¹¹; di‐n‐propyl ether‐d₁₄, (1.13 ± 0.06) × 10⁻¹¹; di‐n‐butyl ether, (3.30 ± 0.25) × 10⁻¹¹; and di‐n‐butyl ether‐d₁₈, (1.49 ± 0.12) × 10⁻¹¹; Cl atom reactions, di‐n‐propyl ether, (3.83 ± 0.05) × 10⁻¹⁰; di‐n‐propyl ether‐d₁₄, (2.84 ± 0.31) × 10⁻¹⁰; di‐n‐butyl ether, (5.15 ± 0.05) × 10⁻¹⁰; and di‐n‐butyl ether‐d₁₈, (4.03 ± 0.06) × 10⁻¹⁰. The rate constants for the di‐n‐propyl ether and di‐n‐butyl ether reactions are in agreement with literature data, and the deuterium isotope effects are consistent with H‐atom abstraction being the rate‐determining steps for both the OH radical and Cl atom reactions. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 425–431, 1999     

Determination of the rate constants for the gas-phase reactions of methyl butenol with OH radicals,ozone, NO3 radicals,and Cl atoms

Using a relative rate method, rate constants for the gas-phase reactions of 2-methyl-3-buten-2-ol (MBO) with OH radicals, ozone, NO₃ radicals, and Cl atoms have been investigated using FTIR. The measured values for MBO at 298±2 K and 740±5 torr total pressure are: k_OH=(3.9±1.2)×10⁻¹¹ cm³ molecule⁻¹ s⁻¹, k_O3=(8.6±2.9)×10⁻¹⁸ cm³ molecule⁻¹ s⁻¹, k=(8.6±2.9)×10⁻¹⁵ cm³ molecule⁻¹ s⁻¹, and k_Cl=(4.7±1.0)×10⁻¹⁰ cm³ molecule⁻¹ s⁻¹. Atmospheric lifetimes have been estimated with respect to the reactions with OH, O₃, NO₃, and Cl. The atmospheric relevance of this compound as a precursor for acetone is, also, briefly discussed. © 1998 John Wiley & Sons, Inc. Int J Chem Kinet: 30: 589–594, 1998     

Kinetics and mechanisms of the reactions of chlorine atoms with ethane,propane, and n-butane

Absolute (flash photolysis) and relative (FTIR-smog chamber and GC) rate techniques were used to study the gas-phase reactions of Cl atoms with C₂H₆ (k₁), C₃H₈ (k₃), and n-C₄H₁₀ (k₂). At 297 ± 1 K the results from the two relative rate techniques can be combined to give k₂/k₁ = (3.76 ± 0.20) and k₃/k₁ = (2.42 ± 0.10). Experiments performed at 298–540 K give k₂/k₁ = (2.0 ± 0.1)exp((183 ± 20)/T). At 296 K the reaction of Cl atoms with C₃H₈ produces yields of 43 ± 3% 1-propyl and 57 ± 3% 2-propyl radicals, while the reaction of Cl atoms with n-C₄H₁₀ produces 29 ± 2% 1-butyl and 71 ± 2% 2-butyl radicals. At 298 K and 10–700 torr of N₂ diluent, 1- and 2-butyl radicals were found to react with Cl₂ with rate coefficients which are 3.1 ± 0.2 and 2.8 ± 0.1 times greater than the corresponding reactions with O₂. A flash-photolysis technique was used to measure k₁ = (5.75 ± 0.45) × 10⁻¹¹ and k₂ = (2.15 ± 0.15) × 10⁻¹⁰ cm³ molecule⁻¹ s⁻¹ at 298 K, giving a rate coefficient ratio k₂/k₁ = 3.74 ± 0.40, in excellent agreement with the relative rate studies. The present results are used to put other, relative rate measurements of the reactions of chlorine atoms with alkanes on an absolute basis. It is found that the rate of hydrogen abstraction from a methyl group is not influenced by neighboring groups. The results are used to refine empirical approaches to predicting the reactivity of Cl atoms towards hydrocarbons. Finally, relative rate methods were used to measure rate coefficients at 298 K for the reaction of Cl atoms with 1- and 2-chloropropane and 1- and 2-chlorobutane of (4.8 ± 0.3) × 10⁻¹¹, (2.0 ± 0.1) × 10⁻¹⁰, (1.1 ± 0.2) × 10⁻¹⁰, and (7.0 ± 0.8) × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹, respectively. © 1997 John Wiley & Sons, Inc. Int J Chem Kinet 29: 43–55, 1997.     

Atmospheric chemistry of di-tert-butyl ether: Rates and products of the reactions with chlorine atoms,hydroxyl radicals,and nitrate radicals

The rate constants for the gas-phase reactions of di-tert-butyl ether (DTBE) with chlorine atoms, hydroxyl radicals, and nitrate radicals have been determined in relative rate experiments using FTIR spectroscopy. Values of k_(DTBE+CI) = (1.4 ± 0.2) × 10⁻¹⁰,k_(DTBE+OH) = (3.7 ± 0.7) × 10⁻¹², and k_(DTBE+N03) = (2.8 ± 0.9) × 10⁻¹⁶ cm³ molecule⁻¹ s⁻¹ were obtained. Tert-butyl acetate was identified as the major product of both Cl atom and OH radical initiated oxidation of DTBE in air in the presence of NO_x. The molar tert-butyl acetate yield was 0.85 ± 0.11 in the Cl atom experiments and 0.84 ± 0.11 in OH radical experiments. As part of this work the rate constant for reaction of Cl atoms with tert-butyl acetate at 295 K was determined to be (1.6 ± 0.3) × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹. The stated errors are two standard deviations (2σ). © 1996 John Wiley & Sons, Inc.     

Self-association of thiols. The baggy fit problem in weak complexes

The PMR technique has been used to obtain thermodynamic data for hydrogen bonding of alkanethiols (RSH) in 1:1 dimers in carbon tetrachloride. At ca. 303°K these are (R, 10⁴K(M^?1), ?ΔH°(kcal/mole), ?ΔS°(eu)): n-C₃H₇, 51 ± 5, 0.9 ± 0.15, 13 ± 1; i-C₃H₇, 50 ± 10, 0.8 ± 0.3, 13 ± 1; n-C₄H₉, 35 ± 2, 0.8 ± 0.15, 14 ± 1; t-C₄H₉, 14 ± 4, 1.1 ± 0.7, 16 ± 2; C₆H₁₁, 1.3 ± 2, 0.7 ± 0.3, 15 ± 1. Alkanethiol self-association is weak, and although an exact expression [Eqn. (5)] reproduces spectral data precisely, the fit is sufficiently ‘loose’ or ‘baggy’ so that values of K, ΔH° and ΔS° are uncertain. The methodology of the treatment of self-association data and their errors is examined and Deranleau's useful approach is extended. The impossibility of obtaining reliable data for very weak (< 10 %) or very strong (> 90 %) associations by techniques equivalent to ours is emphasized. The possibility of cyclic thiol dimers is discussed. It is suggested that the PMR method cannot give trustworthy self-association data for aryl or arylalkylthiols because of the relatively large anisotropy effects introduced into the dilution shift.     

Kinetic study of the reaction OH + HI by laser photolysis-resonance fluorescence

The gas phase reaction of OH radicals with hydrogen iodide (HI) has been studied using a Laser Photolysis-Resonance Fluorescence (LP-RF) apparatus, recently developed in our group. The measured rate constant at 298 K was (2.7 ± 0.2) × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹. This rate constant is compared with the ones of the reactions OH + HCl and OH + HBr. The role of the reaction OH + HI in marine tropospheric chemistry is discussed. In addition, the LP-RF apparatus was tested and validated by measuring the following rate constants (in cm³ molecule⁻¹ s⁻¹ units): 𝓀(OH + HNO₃) = (1.31 ± 0.06) × 10⁻¹³ at p = 27 and 50 Torr of argon and 𝓀(OH + C₃H₈) = (1.22 ± 0.08) × 10⁻¹². These rate constants are in very good agreement with the literature data.     

The rate constants for the reaction of the hydroxyl radical with methyl,n-propyl,and n-butyl nitrites

The kinetics of the reaction of OH radicals with methyl, n-propyl, and n-butyl nitrite have been studied in a discharge flow system under pseudo first-order conditions. The OH radicals were generated by the reaction of H atoms with NO₂ and the concentration of OH; monitored by resonance fluorescence, was followed as a function of time in an excess of each nitrite. Values of k(CH₃ONO) = (0.6 ± 0.09) × 10⁹ dm³ mol^?1 s^?1 k(n – C₃H₇ONO) = (1.39 ± 0.20) × 10⁹ dm³ mol^?1 s^?1, and k(n – C₄H₉ONO) = (2.89 ± 0.43) × 10⁹ dm³ mol^?1 s^?1 at 295 K were obtained. These results agree with previous relative rate measurements from this laboratory but the value for k (CH₃ONO) is a factor of 7 greater than the value obtained by relative rate measurements elsewhere using a different OH source.     

Kinetics of OH and Cl reactions with a series of aldehydes

The rate constants for the reactions of the OH radicals with a series of aldehydes have been measured in the temperature range 243–372 K, using the pulsed laser photolysis‐pulsed laser induced fluorescence method. The obtained data for propanaldehyde, iso‐butyraldehyde, tert‐butyraldehyde, and n‐pentaldehyde were as follows (in cm³ molecule⁻¹ s⁻¹): (a) in the Arrhenius form: (5.3 ± 0.5) × 10⁻¹² exp[(405 ± 30)/T], (7.3 ± 1.9) × 10⁻¹² exp[(390 ± 78)/T], (4.7 ± 0.8) × 10⁻¹² exp[(564 ± 52)/T], and (9.9 ± 1.9) × 10⁻¹² exp[(306 ± 56)/T]; (b) at 298 K: (2.0 ± 0.3) × 10⁻¹¹, (2.6 ± 0.4) × 10⁻¹¹, (2.7 ± 0.4) × 10⁻¹¹, and (2.8 ± 0.2) × 10⁻¹¹, respectively. In addition, using the relative rate method and alkanes as the reference compounds, the room‐temperature rate constants have been measured for the reactions of chlorine atoms with propanaldehyde, iso‐butyraldehyde, tert‐butyraldehyde, n‐pentaldehyde, acrolein, and crotonaldehyde. The obtained values were (in cm³ molecule⁻¹ s⁻¹): (1.4 ± 0.3) × 10⁻¹⁰, (1.7 ± 0.3)10⁻¹⁰, (1.6 ± 0.3) × 10⁻¹⁰, (2.6 ± 0.3) × 10⁻¹⁰, (2.2 ± 0.3) × 10⁻¹⁰, and (2.6 ± 0.3) × 10⁻¹⁰, respectively. The results are presented and discussed in terms of structure‐reactivity relationships and atmospheric importance. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 676–685, 2000     

Quenching of *UF6 (A state) by alkanes

The removal of *UF₆ (A state) molecules by selected alkanes has been investigated at 25°C. The following rate constants (units of 10¹¹ l/mol·sec) were evaluated: iso-C₄F₁₀, 0.0432 ± 0.0115; n-C₄F₁₀, 0.0764 ± 0.020; C₂F₆, 0.0192 ± 0.0052; CH₄, 0.0612 ± 0.0061; C₂H₆, 3.78 ± 0.60; C₃H₈, 5.08 ± 0.60; n-C₄H₁₀, 5.05 ± 0.78; iso-C₄H₁₀, 4.17 ± 1.15; neo-C₅H₁₂, 6.59 ± 0.93; CF₃? CH₃, 0.0385 ± 0.0056; CF₂H? CF₂H, 0.0729 ± 0.0074; and CF₂H? CFH₂, 0.149 ± 0.015. The perfluoro-alkane quenching of *UF₆ proceeds via a physical mechanism. The other alkane quenching reactions are consistent with a chemical mechanism also contributing in varying degrees which may involve removal of two hydrogens from the alkane.     

Kinetics and mechanisms of the reactions of aluminium(III) with β-diketones in aqueous solution

The kinetics and mechanisms of the reactions of aluminium(III) with pentane-2,4-dione (Hpd), 1,1,1-trifluoro pentane-2,4-dione (Htfpd) and heptane-3,5-dione (Hhptd) have been investigated in aqueous solution at 25°C and ionic strength 0.5 mol dm⁻³ sodium perchlorate. The kinetic data are consistent with a mechanism in which aluminium(III) reacts with the β-diketones by two pathways, one of which is acid independent while the second exhibits a second-order inverse-acid dependence. The acid-independent pathway is ascribed to a mechanism in which [Al(H₂O)₆]³⁺ reacts with the enol tautomers of Hpd, Htfpd, and Hhptd with rate constants of 1.7(±1.3)×10⁻², 0.79(±0.21), and 7.5(±1.6)×10⁻³ dm³ mol⁻¹ s⁻¹, respectively. The inverse acid pathway is consistent with a mechanism in which [Al(H₂O)₅(OH)]²⁺ reacts with the enolate ions of Hpd, Htfpd, and Hhptd with rate constants of 4.32(±0.18)×10⁶, 5.84(±0.24)×10³, and 1.67(±0.05)×10⁷ dm³ mol⁻¹ s⁻¹, respectively. An alternative formulation involves a pathway in which [Al(H₂O)₄(OH)₂]⁺ reacts with the protonated enol tautomers of the ligands. This gives rate constants of 2.79(±0.12)×10⁴, 3.86(±0.16)×10⁵, and 8.98(±0.25)×10³ dm³ mol⁻¹ s⁻¹ for reaction with Hpd, Htfpd, and Hhptd, respectively. Consideration of the kinetic data reported here together with data from the literature, suggest that [Al(H₂O)₅(OH)]²⁺ reacts by an associative or associative-interchange mechanism. © 1998 John Wiley & Sons, Inc. Int J Chem Kinet 30: 257–266, 1998.     

Rate coefficients for the reactions of OH with butanols from 298 K to temperatures relevant for low-temperature combustion

Rate coefficients for the reactions of OH with n, s, and iso-butanol have been measured over the temperature range 298 to ∼650 K. The rate coefficients display significant curvature over this temperature range and bridge the gap between previous low-temperature measurements with a negative temperature dependence and higher temperature shock tube measurements that have a positive temperature dependence. In combination with literature data, the following parameterizations are recommended: k_{1,OH + n-butanol}(T) = (3.8 ± 10.4) × 10⁻¹⁹T^{2.48 ± 0.37}exp ((840 ± 161)/T) cm³ molecule⁻¹ s⁻¹ k_{2,OH + s-butanol}(T) = (3.5 ± 3.0) × 10⁻²⁰T^{2.76 ± 0.12}exp ((1085 ± 55)/T) cm³ molecule⁻¹ s⁻¹ k_{3,OH + i-butanol}(T) = (5.1 ± 5.3) × 10⁻²⁰T^{2.72 ± 0.14}exp ((1059 ± 66)/T) cm³ molecule⁻¹ s⁻¹ k_{4,OH + t-butanol}(T) = (8.8 ± 10.4) × 10⁻²²T^{3.24 ± 0.15}exp ((711 ± 83)/T) cm³ molecule⁻¹ s⁻¹ Comparison of the current data with the higher shock tube measurements suggests that at temperatures of ∼1000 K, the OH yields, primarily from decomposition of β-hydroxyperoxy radicals, are ∼0.3 (n-butanol), ∼0.3 (s-butanol) and ∼0.2 (iso-butanol) with β-hydroxyperoxy decompositions generating OH, and a butene as the main products. The data suggest that decomposition of β-hydroxyperoxy radicals predominantly occurs via OH elimination.     

Kinetic study of gas-phase reactions of pinonaldehyde and structurally related compounds

Rate constants for the reactions of OH, NO₃, and O₃ with pinonaldehyde and the structurally related compounds 3-methylbutanal, 3-methylbutan-2-one, cyclobutyl-methylketone, and 2,2,3-trimethyl-cyclobutyl-1-ethanone have been measured at 300±5 K using on-line Fourier transform infrared spectroscopy. The rate constants obtained for the reactions with pinonaldehyde were: k_OH=(9.1±1.8)×10⁻¹¹ cm³ molecule⁻¹ s⁻¹, k_NO3=(5.4±1.8)×10⁻¹⁴ cm³ molecule⁻¹ s⁻¹, and k_O3=(8.9±1.4)×10⁻²⁰ cm³ molecule⁻¹ s⁻¹. The results obtained indicate a chemical lifetime of pinonaldehyde in the troposphere of about two hours under typical daytime conditions, [OH]=1.6×10⁶ molecule cm⁻³. © 1997 John Wiley & Sons, Inc. Int J Chem Kinet 29: 527–533, 1997.     

Kinetic study of the oxidation reaction of 4-methylphenyl radical

A kinetic study of the reaction of the 4-methylphenyl radical (4-C₆H₄CH₃) with the oxygen molecule was conducted using experimental and theoretical approaches. The absorption spectrum for the λ = 266 nm photolysis of the 4-C₆H₄CH₃X (X = Cl, Br)/N₂/O₂ mixture was measured in the wavelength range of λ = 503-512 nm using N₂ as the buffer gas at a total pressure of 40 Torr using a cavity ring-down spectroscopy apparatus coupled with a pulsed laser photolysis system. Based on the absorbance of the product of the 4-C₆H₄CH₃ + O₂ reaction at λ = 504 nm, the reaction rate coefficient for the 4-C₆H₄CH₃ + O₂ reaction was determined to be k = (1.21 ± 0.10) × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹ and k = (1.18 ± 0.21) × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹ using 4-C₆H₄CH₃Cl and 4-C₆H₄CH₃Br, respectively, as the radical precursor. And there was no pressure dependence in the total pressure range of 10-90 Torr varying partial pressure of N₂ buffer gas at T = 296 ± 5 K. The geometries, vibration frequencies, and potential energy surfaces of the reactants, major products, and transition states in the 4-C₆H₄CH₃ + O₂ reaction were determined using the CBS-QB3 method. The k value at the high-pressure limit was calculated to be 1.26 × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹ using the variational transition-state theory. The calculated value of k was consistent with the experimental value, which indicated that the 4-C₆H₄CH₃ + O₂ reaction reaches the high-pressure limit at 10 Torr. Therefore, the oxidation of the 4-C₆H₄CH₃ radical is almost 10 times faster than that of the benzyl radical, which has the same chemical formula, at the high-pressure limit.     

Thermochemical Properties of Palladium(II) Chelates Involving Dialkyldithiocarbamates

The standard molar enthalpies of formation of crystalline dialkyldithiocarbamates chelates, [Pd(S₂CNR₂)₂], with R=C₂H₅, n-C₃H₇, n-C₄H₉ and i-C₄H₉, were determined through reaction-solution calorimetry in acetone, at 298.15 K. From the standard molar enthalpies of formation of the gaseous chelates, the homolytic (172.4±3.8, 182.5±3.2,150.9±3.1 and 162.6±3.1 kJ mol⁻¹) and heterolytic (745.0±3.8, 803.7±3.3,834.3±3.1 and 735.2±3.0 kJ mol⁻¹) mean palladium-sulphur bond-dissociation enthalpies were calculated. This revised version was published online in July 2006 with corrections to the Cover Date.     

Rate coefficients for reactions of OH radicals with CH3D,CH2D2, CHD3, and CD4

Fourier transform infrared (FTIR) smog chamber techniques were used to investigate the atmospheric chemistry of the isotopologues of methane. Relative rate measurements were performed to determine the kinetics of the reaction of the isotopologues of methane with OH radicals in cm³ molecule⁻¹ s⁻¹ units: k(CH₃D + OH) = (5.19 ± 0.90) × 10⁻¹⁵, k(CH₂D₂ + OH) = (4.11 ± 0.74) × 10⁻¹⁵, k(CHD₃ + OH) = (2.14 ± 0.43) × 10⁻¹⁵, and k(CD₄ + OH) = (1.17 ± 0.19) × 10⁻¹⁵ in 700 Torr of air diluent at 296 ± 2 K. Using the determined OH rate coefficients, the atmospheric lifetimes for CH_4–xD_x (x = 1–4) were estimated to be 6.1, 7.7, 14.8, and 27.0 years, respectively. The results are discussed in relation to previous measurements of these rate coefficients.     

Gas‐phase rate coefficients for a series of alkyl cyclohexanes with OH radicals and Cl atoms

The rate coefficients of the reactions of OH radicals and Cl atoms with three alkylcyclohexanes compounds, methylcyclohexane (MCH), trans‐1,4‐dimethylcyclohexane (DCH), and ethylcyclohexane (ECH) have been investigated at (293 ± 1) K and 1000 mbar of air using relative rate methods. A majority of the experiments were performed in the Highly Instrumented Reactor for Atmospheric Chemistry (HIRAC), a stainless steel chamber using in situ FTIR analysis and online gas chromatography with flame ionization detection (GC‐FID) detection to monitor the decay of the alkylcyclohexanes and the reference compounds. The studies were undertaken to provide kinetic data for calibrations of radical detection techniques in HIRAC. The following rate coefficients (in cm³ molecule⁻¹ s⁻¹) were obtained for Cl reactions: k_(Cl+MCH) = (3.51 ± 0.37) × 10^–10, k_(Cl+DCH) = (3.63 ± 0.38) × 10⁻¹⁰, k_(Cl+ECH) = (3.88 ± 0.41) × 10⁻¹⁰, and for the reactions with OH radicals: k_(OH+MCH) = (9.5 ± 1.3) × 10^–12, k_(OH+DCH) = (12.1 ± 2.2) × 10⁻¹², k_(OH+ECH) = (11.8 ± 2.0) × 10⁻¹². Errors are a combination of statistical errors in the relative rate ratio (2σ) and the error in the reference rate coefficient. Checks for possible systematic errors were made by the use of two reference compounds, two different measurement techniques, and also three different sources of OH were employed in this study: photolysis of CH₃ONO with black lamps, photolysis of H₂O₂ at 254 nm, and nonphotolytic trans‐2‐butene ozonolysis. For DCH, some direct laser flash photolysis studies were also undertaken, producing results in good agreement with the relative rate measurements. Additionally, temperature‐dependent rate coefficient investigations were performed for the reaction of methylcyclohexane with the OH radical over the range 273‐343 K using the relative rate method; the resulting recommended Arrhenius expression is k_{(OH + MCH)} = (1.85 ± 0.27) × 10^–11 exp((–1.62 ± 0.16) kJ mol⁻¹/RT) cm³ molecule⁻¹ s⁻¹. The kinetic data are discussed in terms of OH and Cl reactivity trends, and comparisons are made with the existing literature values and with rate coefficients from structure‐activity relationship methods. This is the first study on the rate coefficient determination of the reaction of ECH with OH radicals and chlorine atoms, respectively.