Fabrication of Au‐Nanoparticle/TiO2‐Nanotubes Electrodes Using Electrochemical Methods and Their Application for Electrocatalytic Oxidation of Hydroquinone

Gold nanoparticle (Au‐NPs)‐Titanium oxide nanotube (TiO₂‐NTs) electrodes are prepared by using galvanic deposition of gold nanoparticles on TiO₂‐NTs electrodes as support. Scanning electron microscopy and energy‐dispersive X‐ray spectroscopy results indicate that nanotubular TiO₂ layers consist of individual tubes of about 60–90 nm diameters and gold nanoparticles are well‐dispersed on the surface of TiO₂‐NTs support. The electrooxidation of hydroquinone of Au‐NPs/TiO₂‐NTs electrodes is investigated by different electrochemical methods. Au‐NPs/TiO₂‐NTs electrode can be used repeatedly and exhibits stable electrocatalytic activity for the hydroquinone oxidation. Also, determination of hydroquinone in skin cream using this electrode was evaluated. Results were found to be satisfactory and no matrix effects are observed during the determination of hydroquinone content of the “skin cream” samples.     

Highly controlled coating of biomimetic polydopamine in TiO2 nanotubes

Highly controlled coating of biomimetic polydopamine (PDA) was achieved on titanium dioxide nanotubes (TiO₂ NTs) by exposing TiO₂ NT arrays to a slightly alkaline dopamine solution. The thin films act as photonic sensitizers (enhancing photocurrents and photodegradation) in the visible light range. The PDA coatings can furthermore be used as a platform for decorating the TiO₂ NTs with different co-catalysts and metal nanoparticles (NPs).     

Visible‐light‐driven self‐cleaning SERS substrate of silver nanoparticles and graphene oxide decorated nitrogen‐doped titania nanotube array

Graphene oxide (GO) and silver nanoparticles (Ag NPs) sequentially decorated nitrogen‐doped titania nanotube array (N‐TiO₂ NTA) had been designed as visible‐light‐driven self‐cleaning surface‐enhanced Raman scattering (SERS) substrate for a recyclable SERS detection application. N‐TiO₂ NTA was fabricated by anodic oxidation and then doping nitrogen treatment in ammonia atmosphere, acting as a visible‐light‐driven photocatalyst and supporting substrate. Ag/GO/N‐TiO₂ NTA was prepared by decorating GO monolayer through an impregnation process and then depositing Ag NPs through a polyol process on the surface of N‐TiO₂ NTA, acting as the collection of organic molecule and Raman enhancement. The SERS activity of Ag/GO/N‐TiO₂ NTA was evaluated using methyl blue as an organic probe molecule, revealing the analytical enhancement factor of 4.54 × 10⁴. Ag/GO/N‐TiO₂ NTA was applied as active SERS substrate to determine a low‐affinity organic pollutant of bisphenol A, revealing the detection limit of as low as 5 × 10^?7 m . Ag/GO/N‐TiO₂ NTA could also achieve self‐cleaning function for a recycling utilization through visible‐light‐driven photocatalytic degradation of the adsorbed organic molecules. Ag/GO/N‐TiO₂ NTA has been successfully reused for five times without an obvious decay in accuracy and sensitivity for organic molecule detection. The unique properties of this SERS substrate enable it to have a promising application for the sensitive and recyclable SERS detection of low‐affinity organic molecules. Copyright © 2016 John Wiley & Sons, Ltd.     

Enhancement of ethanol electrooxidation on plasmonic Au/TiO2 nanotube arrays

Novel electrocatalysts Au/TiO₂ nanotube arrays (Au/TiO₂NTs) were prepared by loading low-content(1.9 at.%) of Au nanoparticles (AuNPs) onto highly ordered TiO₂ nanotube arrays (TiO₂NTs). Ethanol electrooxidation indicates that visible-light (λ > 400 nm) irradiation can significantly enhance the activity as well as resistpoisoning of Au/TiO₂NTs electrocatalysts that are activated by plasmon resonance. Au/TiO₂NTs catalysts calcinated at 300 °C display the highest performance due to the strong synergistic interactions between TiO₂ and Au NPs. The combination of visible-light irradiation with a controllable potential offers a new strategyfor enhancing the performance of anodes in direct ethanol fuel cell (DEFC).     

TiO2 Nanotubes as a Therapeutic Agent for Cancer Thermotherapy

We report the photothermal properties as well as the in vitro cell test results of titanium oxide nanotubes (TiO₂ NTs) as a potential therapeutic agent for cancer thermotherapy in combination with near-infrared (NIR) light. TiO₂ NTs are found to have a higher photothermal effect upon exposure to NIR laser than Au nanoparticles and single-wall carbon nanotubes, which have also attracted considerable interest as therapeutic agents for cancer thermotherapy. The temperature increase of a TiO₂ NT/NaCl suspension during NIR laser exposure is larger than that of a TiO₂ NT/D.I. water suspension due to the heat generated by the formation of Na₂TiF_6. According to the in vitro cell test results the cells exposed to NIR laser without TiO₂ NT treatment have a cell viability of 96.4%. Likewise, the cells treated with TiO₂ NTs but not with NIR irradiation also have a cell viability of 98.2%. Combination of these two techniques, however, shows a cell viability of 1.35%. Also, the cell deaths are mostly due to necrosis but partly due to late apoptosis. These results suggest that TiO₂ NTs can be used effectively as therapeutic agents for cancer thermotherapy due to their excellent photothermal properties and high biocompatibility.     

浸渍-分解法制备高可见光催化活性的Bi2O3/TiO2纳米管阵列

用浸渍-分解法将Bi₂O₃纳米颗粒沉积在TiO₂纳米管壁上, 制备了Bi₂O₃/TiO₂纳米管阵列. 用电感耦合等离子体发射光谱(ICP-AES)测定了Bi₂O₃/TiO₂ 纳米管阵列的化学组分, 利用X 射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)和紫外-可见(UV-Vis)吸收光谱表征了所制备的样品. 通过在可见光下(λ>400 nm)降解甲基橙(MO)水溶液来评价样品的光催化活性. 结果表明, Bi₂O₃纳米颗粒均匀地沉积在TiO₂纳米管中. Bi₂O₃/TiO₂纳米管阵列具有比纯Bi₂O₃膜和N-TiO₂纳米管阵列高得多的可见光催化活性. Bi₂O₃/TiO₂纳米管阵列活性的增强是其强可见光吸收和Bi₂O₃与TiO₂之间形成的异质结的协同作用的结果.     

SERS and FDTD simulation of gold nanoparticles grafted on germanium wafer via galvanic displacement

Uniform and dense Au nanoparticles grown on Ge (Au/Ge) were fabricated by a facile galvanic displacement method and employed as surface‐enhanced Raman scattering (SERS) substrates. The substrates exhibited excellent reproducibility in the detection of rhodamine 6G aqueous solution with a relative standard deviation of <20%. The substrate showed a high Raman enhancement factor of 3.44 × 10⁶. This superior SERS sensitivity was numerical confirmed by the three‐dimensional finite‐difference time‐domain method, which demonstrated a stronger electric field intensity (|E/E₀|²) distribution around the Au nanoparticles grown on Ge. This facile and low‐cost prepared Au/Ge substrate with high SERS sensitivity and reproducibility might have potential applications in monitoring in situ reaction in aqueous solution. Copyright © 2014 John Wiley & Sons, Ltd.     

Biocompatibility and <Emphasis Type="Italic">in vitro</Emphasis> antineoplastic drug-loaded trial of titania nanotubes prepared by anodic oxidation of a pure titanium

TiO₂ nanotube (NT) arrays have been prepared by anodic oxidation of a Ti sheet, and carbon-deposited TiO₂ NT arrays have been prepared by annealing TiO₂ NT arrays in carbon atmosphere. The biocompatibility of the as-prepared NT arrays was investigated by observing the growth of osteosarcoma (MG-63) cells on the NT arrays. The application of the TiO₂ NT arrays as a drug delivery vehicle was investigated. Both the TiO₂ NTs and the carbon-modified TiO₂ NTs have good biocompatibility supporting the normal growth and adhesion of MG-63 cells with no need of extracellular matrix protein coating. The one end-opened TiO₂ NTs can be easily filled with drugs, working as an efficient drug delivery vehicle.     

ZnGa2O4 Nanorod Arrays Decorated with Ag Nanoparticles as Surface‐Enhanced Raman‐Scattering Substrates for Melamine Detection

The availability of sensitive, reproducible, and stable substrates is critically important for surface‐enhanced Raman spectroscopy (SERS)‐based applications, but it presently remains a challenge. In this work, well‐aligned zinc gallate (ZnGa₂O₄) nanorod arrays grown on a Si substrate by chemical vapor deposition were used as templates to fabricate SERS substrates by deposition of Ag nanoparticles onto the ZnGa₂O₄ nanorod surfaces. The coverage of the Ag nanoparticles on the ZnGa₂O₄ nanorod surfaces was easily controlled by varying the amount of AgNO₃. SERS measurements showed that the number density of Ag nanoparticles on the ZnGa₂O₄ nanorod surfaces had a great effect on SERS activity. The SERS signals collected by point‐to‐point and SERS mapping images showed that as‐prepared SERS substrates exhibited good spatial uniformity and reproducibility. Detection of melamine molecules at low concentrations (1.0×10^?7 M ) was used as an example to show the possible application of such a substrate. In addition, the effect of benzoic acid on the detection of melamine was also investigated. It was found that the SERS signal intensity of melamine decreased greatly as the concentration of benzoic acid was increased.     

Direct Electrochemistry of Hemoglobin on Vertically Aligned Carbon Hybrid TiO2 Nanotubes and Its Highly Sensitive Biosensor Performance

The present work is focused on developing a novel biomaterial platform to achieve enhanced direct electron transfer (DET) of hemoprotein and higher biosensor performance on vertically aligned carbon hybrid TiO₂ nanotubes (C‐TiO₂ NTs). Using a simple surfactant‐assisted method, controllable hybridization of TiO₂ NTs with conductive amorphous carbon species is realized. The obtained C‐TiO₂ NTs is ingeniously chosen to serve as an ideal "vessel" for protein immobilization and biosensor applications. Results show that the appropriate hybridization of C into TiO₂ NTs leads to a much better conductivity of TiO₂ NTs without destroying their preponderant tubular structures or damaging their excellent biocompatibility and hydrophilicity. When used in loading proteins, the C‐TiO₂ NTs can be used as a super vessel for rapid and substantive immobilization of hemoglobin (Hb), with a large surface electroactive Hb coverage ( Γ ??) of 3.3×10^?9 mol·cm^?2. Enhanced DET of Hb is commendably observed on the constructed Hb/C‐TiO₂ NTs biosensor with a couple of well‐defined redox peaks in a fast electron transfer process. The biosensor further exhibits fast response, high sensitivity and stability for the amperometric biosensing of H₂O₂ with the detection limit as low as 3.1×10^?8 mol/L.     

Zeta potential of shape-controlled TiO2 nanoparticles with surfactants

Zeta potential of shape- and size-controlled TiO₂ nanoparticles obtained with the introduction of surfactants during synthesis was measured at different pH values. A unique finding is that TiO₂ nanoparticles shaped by sodium dodecyl sulfate (SDS) have double isoelectric points (IEPs), while other shape-controlled TiO₂ nanoparticles have only one IEP. The double IEPs might be due to the complex chemistry of TiO₂ nanoparticles with the presence of impurities (Na, S, C, etc.). At neutral pH, shape- and size-controlled TiO₂ nanoparticles have more negative zeta potential values and lower IEPs than TiO₂ nanoparticles obtained without the addition of surfactants during synthesis and the commercial anatase TiO₂ nanoparticles Degussa P-25. The lower IEPs could be attributed to the presence of carbonates on particle surfaces. The IEP value of TiO₂ nanoparticles increases with an increase in calcination temperature. The results suggest that the zeta potential of TiO₂ nanoparticles can be manipulated with the addition of surfactants during the synthesis process.     

Enhanced Visible‐Light‐Induced Photoelectrocatalytic Degradation of Methyl Orange by CdS Sensitized TiO2 Nanotube Arrays Electrode

In this work, CdS sensitized TiO₂ nanotube arrays (CdS/TiO₂NTs) electrode was synthesized with the CdS deposition on the highly ordered titanium dioxide nanotube arrays (TiO₂NTs) by sequential chemical bath deposition method (S‐CBD). The as‐prepared CdS/TiO₂NTs was characterized by field‐emission scanning electron microscopy (FE‐SEM) and X‐ray diffraction (XRD). The results indicated that the CdS nanoparticles were effectively deposited on the surface of TiO₂NTs. The amperometric I‐t curve on the CdS/TiO₂NTs electrode was also presented. It was found that the photocurrent density was enhanced significantly from 0.5 to 1.85 mA/cm² upon illumination with applied potential of 0.5 V at the central wavelength of 253.7 nm. The photoelectrocatalytic (PEC) activity of the CdS/TiO₂NTs electrode was investigated by degradation of methyl orange (MO) in aqueous solution. Compared with TiO₂NTs electrode, the degradation efficiencies of CdS/TiO₂NTs electrode increased from 78% to 99.2% under UV light in 2 h, and from 14% to 99.2% under visible light in 3 h, which was caused by effective separation of the electrons and holes due to the effect of CdS, hence inhibiting the recombination of electron/hole pairs of TiO₂NTs.     

Controllable incorporation of CdS nanoparticles into TiO<Subscript>2</Subscript> nanotubes for highly enhancing the photocatalytic response to visible light

A constant current electrochemical deposition was employed to incorporate CdS nanoparticles into the TiO₂ nanotube arrays (TiO₂NTs). The size and amount of CdS nanoparticles in TiO₂NTs (CdS@TiO₂NTs) were controllable via modulating current, deposition time and electrolyte concentration. It was revealed, from the scanning electron microscopy (SEM) images and X-ray photoelectron spectroscopy (XPS) in depth profile, that CdS nanoparticles were filled into TiO₂ nanotubes. A shift of the absorption edge toward the visible region under the optimal electrodeposition condition was observed with the diffuse reflectance spectroscopy (DRS). A 5-fold enhancement in the photocurrent spectrum for TiO₂NTs was observed and the photocurrent response range was significantly extended into the visible region because of the CdS incorporation. Compared with pure TiO₂NTs, under a visible light irradiation, CdS@TiO₂NTs exhibited a 3.5-fold improvement of photocatalytic activity, which was demonstrated by the photocatalytic decomposition of Rhodamine B (RhB).     

Tailored Synthesis of Various Nanomaterials by Using a Graphene‐Oxide‐Based Gel as a Nanoreactor and Nanohybrid‐Catalyzed CC Bond Formation

New graphene oxide (GO)‐based hydrogels that contain vitamin B₂/B₁₂ and vitamin C (ascorbic acid) have been synthesized in water (at neutral pH value). These gel‐based soft materials have been used to synthesize various metal nanoparticles, including Au, Ag, and Pd nanoparticles, as well as nanoparticle‐containing reduced graphene oxide (RGO)‐based nanohybrid systems. This result indicates that GO‐based gels can be used as versatile reactors for the synthesis of different nanomaterials and hybrid systems on the nanoscale. Moreover, the RGO‐based nanohybrid hydrogel with Pd nanoparticles was used as an efficient catalyst for C? C bond‐formation reactions with good yields and showed high recyclability in Suzuki–Miyaura coupling reactions.     

Fabrication of Ag Nanoparticles Embedded in TiO2 Nanotubes: Using Electrospun Nanofibers for Controlling Plasmonic Effects

Composites of electrospun poly(ethylene oxide) (PEO) fibers and silver nanoparticles (Ag NPs) were used as a soft template for coating with TiO₂ by atomic layer deposition (ALD). Whereas the as‐deposited TiO₂ layers on PEO fibers and Ag NPs were completely amorphous, the TiO₂ layers were transformed into polycrystalline TiO₂ nanotubes (NTs) with embedded Ag NPs after calcination. Their plasmonic effect can be controlled by varying the thickness of the dielectric Al₂O₃ spacer between Ag NPs and dye molecules by means of the ALD process. Electronic and spectroscopic analyses demonstrated enhanced photocurrent generation and solar‐cell performance due to the intense electromagnetic field of the dye resulting from the surface plasmon effect of the Ag NPs.     

Study of Pt/TiO2 nanocomposite for cancer-cell treatment

The increasing incidence of cancer all over the world demands new, effective and secure materials for treatment. In this paper, we propose Pt/TiO₂ nanocomposite for cancer-cell treatment because noble metal nanoparticles are supposed to enhance the photocatalytic activity of TiO₂ nanoparticles. To evaluate the cancer-cell killing effect of our Pt/TiO₂ nanocomposite, TiO₂ and Au/TiO₂ nanoparticles are also introduced. The prepared Pt/TiO₂ nanocomposite are characterized with transmission electron microscopy (TEM) and UV–vis adsorption spectra. Results of cell treatment indicate that Pt/TiO₂ nanocomposite, as extremely stable metal–semiconductor nanomaterial, can exhibit a very high photodynamic efficiency under a mild ultraviolet radiation. And our Pt/TiO₂ nanocomposite shows to be more effective in cancer-cell treatment than TiO₂ and Au/TiO₂ nanoparticles. As a result, Pt/TiO₂ nanocomposite may be supposed to have a promising application for cancer-cell treatment.     

In situ controlled growth of well-dispersed gold nanoparticles in TiO2 nanotube arrays as recyclable substrates for surface-enhanced Raman scattering

In this paper, well-aligned Au-decorated TiO(2) nanotube arrays with high surface-enhanced Raman scattering (SERS) enhancement were prepared using a facile in situ reduction and controlled growth approach. The gold nanoparticles are well-dispersed and assembled on the mouth surface and the inside of the TiO(2) nanotubes without clogging. The structure and optical properties of the Au-decorated TiO(2) nanotube arrays have been characterized. The Au-decorated TiO(2) nanotube arrays were employed as SERS-active substrates, which exhibit good performance due to long-range coupling between Au nanoparticles, and TiO(2)-assisted enhanced charge-transfer from Au to Rh6G. The SERS activity of the substrates strongly depends on the crystallite size and level of aggregation. The substrates display significant fluorescence quenching ability and uniform SERS responses throughout the whole surface area. Particularly, good recyclability is shown. The photocatalytic property of Au-decorated TiO(2) nanotube array was exploited to recycle the substrate through UV light photocatalytic purification. The experimental results showed that the substrate is featured by high reproducibility and can be used as a highly efficient SERS substrate for multiple detection of different chemical and biological molecules.     

Graphene‐Supported Ultrafine Metal Nanoparticles Encapsulated by Mesoporous Silica: Robust Catalysts for Oxidation and Reduction Reactions

Graphene nanosheet‐supported ultrafine metal nanoparticles encapsulated by thin mesoporous SiO₂ layers were prepared and used as robust catalysts with high catalytic activity and excellent high‐temperature stability. The catalysts can be recycled and reused in many gas‐ and solution‐phase reactions, and their high catalytic activity can be fully recovered by high‐temperature regeneration, should they be deactivated by feedstock poisoning. In addition to the large surface area provided by the graphene support, the enhanced catalytic performance is also attributed to the mesoporous SiO₂ layers, which not only stabilize the ultrafine metal nanoparticles, but also prevent the aggregation of the graphene nanosheets. The synthetic strategy can be extended to other metals, such as Pd and Ru, for preparing robust catalysts for various reactions.     

RuO2-doping into high-aspect-ratio anodic TiO2 nanotubes by electrochemical potential shock for water oxidation

A novel method for homogenous incorporation of Ru (RuO₂, or RuO₃) into high aspect ratio anodic TiO₂ NTs was studied. TiO₂ NTs were prepared by anodization in HF based electrolyte, after which very short high applied potential, referred to as potential shock, was imposed on the TiO₂ NTs in KRuO₄ electrolyte. The high potential shock induced massive flow of RuO₄⁻ to positively-biased TiO2 NTs, resulting in the incorporation of Ru as a form of Ru, RuO₂, and RuO₃ in the TiO₂ NTs. Optimal potential shock, which allowed the most suitable amount and incorporation state of Ru catalysts in TiO₂ NTs, was determined by SEM, TEM, EDS, XPS, and LSV. It was demonstrated that electrochemical potential shock (simply imposed on the anodic TiO₂ for a few seconds in the electrolyte of KRuO₄) resulted in homogenous incorporation of Ru into the whole nanotubes without the need for any complicated steps or facilities.     

Photoelectrochemical water splitting and simultaneous photoelectrocatalytic degradation of organic pollutant on highly smooth and ordered TiO2 nanotube arrays

The photoelectrochemical water splitting and simultaneous photoelectrocatalytic degradation of organic pollutant were achieved on TiO₂ nanotube electrodes with double purposes of environmental protection and renewable energy production under illumination of simulated solar light. The TiO₂ nanotube arrays (TiO₂ NTs) were fabricated by a two-step anodization method. The TiO₂ NTs prepared in two-step anodization process (2-step TiO₂ NTs) showed much better surface smoothness and tube orderliness than TiO₂ NTs prepared in one-step anodization process (1-step TiO₂ NTs). In the photoelectrochemical water splitting and simultaneous photoelectrocatalytic decomposition process, the 2-step TiO₂ NTs electrode showed both highest photo-conversion efficiency of 1.25% and effective photodecomposition efficiency with existing of methylene blue (MB) as sacrificial agent and as pollutant target. Those results implied that the highly ordered nanostructures provided direct pathway and uniform electric field distribution for effective charges transfer, as well as superior capabilities of light harvesting.